G3VM-61G3

G3VM-61G3 MOS FET Relays Ultrasensitive MOS FET Relay with Driving current 0.2 mA (maximum) in 60-V Load series. • Continuous load current of 400 mA. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections 4 • Communication equipment 3 Mold pin mark * • Test & Measurement equipment OMRON logo • Security equipment -61G3 932 Pin 1 mark • Amusement equipment 1 • Industrial equipment Model name LOT.No. 2 Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. • Various battery-driven devices ■ List of Models Package type Contact form SOP4 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 60 V Model G3VM-61G3 G3VM-61G3 (TR) Minimum package quantity Number per tube Number per tape and reel 100 - - 2,500 * The AC peak and DC value are given for the load voltage. Input ■ Absolute Maximum Ratings (Ta = 25°C) Item LED forward current Repetitive peak LED forward current Output LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP Rating 30 1 Unit mA A ΔIF/°C VR TJ VOFF IO ΔIO/°C IOP TJ VI-O Ta Tstg - −0.3 5 125 60 400 −4.0 1.2 125 1500 −40 to +85 −55 to +125 260 mA/°C V °C V mA mA/°C A °C Vrms °C °C °C Measurement conditions 100 μs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C t = 100 ms, Duty = 1/10 AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.1 1.27 1.4 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFT 0.2 Maximum resistance with output ON RON 1 2 Current leakage when the relay is open ILEAK 1 1000 Capacity between terminals Coff 130 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 3.5 10 Turn-OFF time tOFF 1 5 1 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times VR = 5 V IF 1 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 400 mA IF = 0.5 mA, IO = 400 mA, t < 1 s VOFF = 60 V V = 0, f = 1 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 0.5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) G3VM-61G3 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta −20 0.5 - 48 25 320 65 V mA mA °C ■ Engineering Data Continuous load current IO (mA) LED forward current IF (mA) IF - Ta Continuous load current vs. Ambient temperature LED forward current vs. LED forward voltage 50 40 30 20 10 IO - Ta LED forward current IF (mA) LED forward current vs. Ambient temperature 500 400 300 200 -40 -20 0 20 40 60 80 -20 0 20 40 60 80 100 0.8 1.2 300 200 100 0 -100 -200 IO = 400 mA IF = 0.5 mA, t < 1 s 4 3 2 -400 Trigger LED forward current vs. Ambient temperature 0 -500 0 0.2 0.2 IO = 400 mA t