G3VM-61H1TR

MOS FET Relays G3VM-61H1 MOS FET Relay Designed for Switching Minute and Analog Signals has a 6-pin SOP Package and 60-V Load Voltage • Continuous load current of 400 mA. • Dielectric strength of 1,500 Vrms between I/O. • RoHS Compliant. ■ Application Examples • Broadband systems • Measurement devices • Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 60 VAC Model G3VM-61H1 G3VM-61H1(TR) Number per stick 75 --Number per tape --2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61H1 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61H1 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61H1 6 to 6.3 1.2 0.8 2.54 2.54 MOS FET Relays G3VM-61H1 133 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current Symbol IF IFP Δ IF/°C VR Tj VOFF 50 1 −0.5 5 125 60 400 400 800 mA/°C Ta ≥ 25°C −4.0 −8.0 Tj VI-O Ta Tstg --125 1,500 −40 to +85 °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C 1 2 3 6 5 4 Load DC Rating Unit mA A mA/°C V °C V mA Measurement conditions Note: 100 μs pulses, 100 pps Ta ≥ 25°C 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 1 6 5 4 Load AC or DC Connection A 2 3 Connection A IO Connection B Connection C 1 6 5 4 Load DC ON current reduction rate Connection A Δ ION/°C −4.0 Connection B Connection C Connection B 2 3 Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) −55 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Connection A Connection B Connection C Current leakage when the relay is open ILEAK Capacity between terminals A Connection Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF Symbol VF IR CT IFT RON Minimum 1.0 ------------------1,000 ----Typical 1.15 --30 1.6 1 0.5 0.25 0.001 130 0.8 --0.8 0.1 Maximum 1.3 10 --3 2 1 --1.0 ------2.0 0.5 Unit V μA pF mA Ω Ω Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 400 mA IF = 5 mA, IO = 400 mA IF = 5 mA, IO = 400 mA IF = 5 mA, IO = 800 mA VOFF = 60 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --7.5 ----Typical Maximum 48 25 400 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 134 MOS FET Relays G3VM-61H1 ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 1200 LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 30 1000 C Connection 800 80 10 60 600 A,B Connection 400 3 40 1 20 200 0.3 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 600 Ta = 25 C 400 A Connection IF = 5 mA On-state resistance vs. Ambient temperature RON - Ta Trigger LED forward current I F T (mA) 5 I O = 400 mA IF = 5 mA 4 A Connection Trigger LED forward current vs. Ambient temperature IFT - Ta 5 I O = 400 mA t