G3VM-61TR

MOS FET Relays Low 40-mΩ ON Resistance. Higher power, 2.3-A switching with a 60-V load voltage, SOP package. • Continuous load current of 2.3 A (connection C = 4.6 A). • Dielectric strength of 1,500 Vrms between I/O. RoHS compliant ! Refer to “Common Precautions”. G3VM-61HR ■ Application Examples • Broadband systems • Measurement devices • Data loggers • Industrial equipment Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) (See note.) 60 V Model G3VM-61HR G3VM-61HR(TR) Number per stick 75 --Number per tape --2,500 Note: The AC peak and DC value is given for the load voltage. ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61HR 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61HR 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61HR 6 to 6.3 1.2 0.8 2.54 2.54 54 G3VM-61HR ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current Connection A Connection B Connection C ON current reduction rate Connection A Connection B Connection C Pulse on current Connection temperature Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Iop Tj VI-O Ta Tstg --∆ IIO/°C Symbol IF ∆ IF/°C VR Tj VOFF IO Rating 30 −0.3 5 125 60 2.3 2.3 4.6 −30.7 −30.7 −61.3 7 125 1,500 −40 to +85 A °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s 1 1 G3VM-61HR Unit mA mA/°C V °C V A Measurement Conditions Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A: AC peak/DC Connection B and C: DC Ta ≥ 50°C 6 5 4 Load DC 1 6 5 4 Load AC or DC Connection A 2 3 mA/°C t = 100 ms Connection B 2 3 −55 to +125 °C 260 6 5 4 Load DC Connection C 2 3 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Connection A Connection B Connection C Current leakage when the relay is open Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time ILEAK CI-O RI-O tON tOFF Symbol VF IR CT IFT RON Minimum 1.18 ----------------1,000 ----Typical 1.33 --70 0.4 0.04 0.02 0.01 --0.8 --1.0 0.15 Maximum 1.48 10 --3 0.07 0.04 --10 ----5.0 1.0 V µA pF mA Ω Ω Ω nA pF MΩ ms ms Unit Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 100 mA IF = 5 mA, IO = 2 A, t < 1S IF = 5 mA, IO = 2 A, t < 1S IF = 5 mA, IO = 4 A, t < 1S VOFF = 60 V f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 6 4 RL VDD VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Operating temperature Symbol VDD IF IO Ta --5 --−20 Minimum --7.5 ----Typical 60 20 1.8 65 Maximum V mA A °C Unit ■ Engineering Data Load Current vs. Ambient Temperature G3VM-61HR Load current (A) 6 ■ Safety Precautions Refer to “Common Precautions” for all G3VM models. 5 Connection C 4 3 Connection A, Connection B 2 1 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 55