G3VM-61TR05

MOS FET Relays G3VM-61LR SSOP Package MOS FET Relay with Low Leakage Current, Output Capacitance and ON Resistance (C × R = 20 pF•Ω) in a 60-V Load Voltage Model. • ON resistance of 1 Ω (typical) suppresses output signal attenuation. • Leakage current of 0.04 nA (typ.) when relay is open • RoHS compliant ■ Application Examples • Semiconductor inspection tools • Measurement devices and Data loggers • Broadband systems Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 60 VAC Model G3VM-61LR --Number per tape G3VM-61LR(TR05) 500 G3VM-61LR(TR) 1,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61LR 4.2 228 1.9 1.4 dia 3.65 0.15 0.3 1.27 2.04 0.2 3.8 0.46±0.2 1.8 Note: A tolerance of ±0.1 mm applies to all dimensions unless otherwise specified. Note: The actual product is marked differently from the image shown here. Weight: 0.03 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61LR 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61LR 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-61LR 271 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature IF Δ IF/°C VR Tj VOFF IO Δ ION/°C Tj Symbol 50 −0.5 5 125 60 400 −4.0 125 1,500 −20 to +85 Rating mA mA/°C V °C V mA mA/°C °C Vrms °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C Ta ≥ 25°C Unit Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Dielectric strength between input and VI-O output (See note 1.) Ambient operating temperature Storage temperature Soldering temperature Ta Tstg --- −40 to +125 °C 260 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Current leakage when the relay is open Capacity between terminals Capacity between I/O terminals Insulation resistance between I/O terminals Turn-ON time Turn-OFF time Symbol VF IR CT IFT RON ILEAK COFF CI-O RI-O tON tOFF Minimum 1.0 --------------1,000 ----Typical 1.15 --15 2 1.0 0.04 20 0.3 --0.3 0.2 Maximum 1.3 10 --5 1.5 1,000 ------1 1 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 100 mA, RON < 1.5 Ω IF = 5 mA, IO = 400 mA VOFF = 60 V, Ta = 25°C V = 0, f = 100 MHz, t=