G3VM-61VY

MOS FET Relays G3VM-61VY Special SOP4-pin package with Dielectric strength AC 3.75 kV • Trigger LED forward current of 2 mA (maximum) facilitates power saving designs and prolonged battery life. • Continuous load current of 70 mA. RoHS compliant Refer to “Common Precautions”. Note: ■ Application Examples The actual product is marked differently from the image shown here. • Broadband systems • Security systems • Industrial equipment • Battery powered equipment • Measurement devices • Amusement machines ■ List of Models Package Contact form Special SOP4 SPST-NO Note: Terminals Load voltage (peak value) (See the note.) Model Surface-mounting 60 V terminals Number per stick Number per tape G3VM-61VY 150 --- G3VM-61VY(TR) --- 3,000 The AC peak and DC value are given for the load voltage. ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61VY 4.4±0.25 3.6±0.2 2.5±0.2 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 0.1±0.1 0.5min 7.0±0.4 2.54±0.25 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-61VY 4 4 3 3 OMRON logo Model name LOT No. Pin 1 mark 1 1 2 2 Note: The actual product is marked differently from the image shown here. ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61VY 6 to 6.3 1.2 0.8 2.54 G3VM-61VY G3VM-61VY ■ Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps LED forward current reduction rate ∆ IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Load voltage (AC peak/DC) VOFF 60 V Continuous load current (AC peak/DC) IO 70 mA ON current reduction rate ∆ IO/°C −0.7 mA/°C Connection temperature Tj 125 °C VI-O 3,750 Vrms AC for 1 min Operating temperature Ta −40 to +85 °C With no icing or condensation Storage temperature Tstg −55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 Input Output Dielectric strength between input and output (See note 1.) 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Ta ≥ 25°C °C 10 s ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 Reverse current IR --- --- 10 µA VR = 5 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 0.6 2 mA IO = 70 mA Maximum resistance with output ON RON --- 25 50 Ω IF = 3 mA, IO = 70 mA Current leakage when the relay is open ILEAK --- 1 1000 nA VOFF = 60 V Capacity between I/O terminals CI-O --- 0.4 --- pF f = 1 MHz, Vs = 0 V Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Output V Turn-ON time tON --- 1 5 ms Turn-OFF time tOFF --- 0.5 5 ms IF = 10 mA 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 IF = 3 mA, RL = 200 Ω, VDD = 10 V (See note 2.) VOUT 10% t ON Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit VDD --- --- 48 V Operating LED forward current IF --- 3 25 mA Continuous load current (AC peak/DC) IO --- --- 60 mA Operating temperature Ta − 20 --- 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to “Common Precautions” for all G3VM models. Load current (mA) G3VM-61VY 100 80 60 40 20 0 −20 0 20 40 60 80 100 Ambient temperature (°C) VDD VOUT IF ■ Recommended Operating Conditions Load voltage (AC peak/DC) RL 90% t OFF