G3VM-62F1

G3VM-62C1/F1 MOS FET Relays Analog-switching MOS FET Relays for High Switching Currents, with Dielectric Strength of 2.5 kVAC between I/O. • New 2-channel model included in the 60-V load voltage series. • Switches minute analog signals. • Dielectric strength of 2,500 Vrms between I/O. • Surface-mounting models included in series. Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections • Test & Measurement equipment 8 7 6 5 • Security equipment OMRON logo 1 3 2 Model name LOT.NO. 932 Pin 1 mark 4 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals PCB Terminals 2a (DPST-NO) DIP8 Minimum package quantity Model Number per tube Number per tape and reel G3VM-62C1 60 V Surface-mounting Terminals G3VM-62F1 G3VM-62F1(TR) 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 60 500 −5.0 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions VF IR 1.0 - 1.15 - 1.3 10 V µA IF = 10 mA VR = 5 V Capacity between terminals Trigger LED forward current CT IFT - 30 1.6 3 pF mA V = 0, f = 1 MHz IO = 500 mA Maximum resistance with output ON Current leakage when the relay is open RON ILEAK - 1.0 - 2.0 1.0 Ω µA IF = 5 mA, IO = 500 mA VOFF = 60 V Capacity between terminals Capacity between I/O terminals COFF CI-O - 130 0.8 - pF pF V = 0, f = 1 MHz f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 - - MΩ VI-O = 500 VDC, ROH ≤ 60% Turn-ON time Turn-OFF time tON tOFF - 0.8 0.1 2.0 0.5 ms ms IF = 5 mA, RL = 200 Ω, VDD = 20 V(See note 2.) Output Input LED forward voltage Reverse current 1 Note: 2. Turn-ON and Turn-OFF Times IF 1(3) 8(6) 2(4) 7(5) RL IF VOUT 10% t ON 90% t OFF VDD VOUT G3VM-62C1/F1 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 5 −20 7.5 - 48 25 500 65 V mA mA °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 0 -20 0 20 40 60 80 100 500 400 300 0.3 0 20 40 0 -200 100 0.4 IF = 5mA 4 3 2 -20 0 20 40 tON, tOFF - IF 60 VDD = 20V RL = 200Ω 1000 500 300 tOFF 100 10 30 50 1.8 t < 1s 4 3 2 1 0 -20 100 0 20 tON 1000 300 tOFF 100 30 40 60 80 100 Ambient temperature Ta (°C) Current leakage vs. Ambient temperature ILEAK - Ta 3000 30 VOFF = 60V 10 3 1 0.3 VDD = 20V RL = 200Ω tON 5 80 Current leakage ILEAK (nA) Turn ON, Turn OFF time tON, tOFF (µs) Ta = 25°C 1.6 IO = 500mA tON, tOFF - Ta 3000 1.4 5 Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. Ambient temperature 5000 1.2 IFT - Ta IO = 500mA 0.6 Turn ON, Turn OFF time vs. LED forward current 3 1 LED forward voltage VF (V) 0 0.2 50 0.8 Trigger LED forward current vs. Ambient temperature 1 1 0.1 0.6 120 5 On-state voltage VON (V) Turn ON, Turn OFF time tON, tOFF (µs) 80 On-state resistance vs. Ambient temperature -400 30 60 Trigger LED forward current IFT (mA) 200 0 3 Ambient temperature Ta (°C) On-state resistance RON (Ω) Continuous load current IO (mA) 400 -0.2 10 RON - Ta Ta = 25°C IF = 5mA -0.4 30 100 IO - VON 600 -600 -0.6 Ta = 25°C 1 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 100 200 0 -20 120 IF - VF 600 LED forward current IF (mA) 100 Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage IF = 5mA 100 300 10 -20 0 LED forward current IF (mA) 20 40 60 80 100 Ambient temperature Ta (°C) 0.1 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions DIP8 type ■ Appearance DIP (Dual Inline Package) DIP8 OMRON logo Model name 932 Pin 1 mark LOT.NO. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit:mm) PCB Terminals Surface-mounting Terminals PCB Dimensions (BOTTOM VIEW) Weight: 0.54 g Weight: 0.54 g Eight, 0.8-dia. holes 2.54 (0.61) 2.54 9.66±0.25 9.66±0.25 6.4±0.25 7.62±0.25 Actual Mounting Pad Dimensions 0.8±0.25 7.62±0.25 (Recommended Value, TOP VIEW) 3.65 +0.15 −0.25 +0.1 0.25 −0.05 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 (0.61) (1.52) (1.52) 6.4±0.25 7.85 to 8.80 3.65+0.15 −0.25 4.0+0.25 −0.2 1.2±0.15 2.54±0.25 Note: The actual product is marked differently from the image shown here. 2.54 1.0 min. 1.0 min. 10.0 max. 8.3 to 8.8 1.3 1.5 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K145-E1-01 0412(0412)(O)