MOS FET Relays
G3VM-81GR1
New MOS FET Relay Designed for Switching Minute and Analog Signals, SOP Package.
• New model for 80-V loads. • Low C × R of 32.5 pF•Ω. • Dielectric strength of 1,500 Vrms between I/O. • RoHS compliant
■ Application Examples
• Broadband systems • Measurement devices and Data loggers • Amusement machines
Note: The actual product is marked differently from the image shown here.
■ List of Models
Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 80 VAC Model G3VM-81GR1 G3VM-81GR1(TR) Number per stick 100 --Number per tape --2,500
■ Dimensions
Note: All units are in millimeters unless otherwise indicated. G3VM-81GR1
4.4±0.25
3.9±0.2
2.1 max. 0.15
Note: The actual product is marked differently from the image shown here.
0.4±0.1 2.54±0.25
0.1±0.1
0.6±0.3 7.0±0.4
Weight: 0.1 g
■ Terminal Arrangement/Internal Connections (Top View)
G3VM-81GR1
4 3
1
2
■ Actual Mounting Pad Dimensions (Recommended Value, Top View)
G3VM-81GR1
6 to 6.3 1.2
0.8 2.54
MOS FET Relays
G3VM-81GR1
149
■ Absolute Maximum Ratings (Ta = 25°C)
Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Symbol IF IFP Δ IF/°C VR Tj 50 1 −0.5 5 125 80 200 −2.0 125 1,500 −20 to +85 Rating Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C Ta ≥ 25°C Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side.
Output Load voltage (AC peak/DC) VOFF Continuous load current ON current reduction rate Connection temperature IO Δ IO/°C Tj
Dielectric strength between input and VI-O output (See note 1.) Ambient operating temperature Storage temperature Soldering temperature Ta Tstg ---
−40 to +125 °C 260
■ Electrical Characteristics (Ta = 25°C)
Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --15 --5 0.5 6.5 0.7 --0.13 0.17 Maximum 1.3 10 --3 8 1 11 ----0.5 0.5 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 200 mA IF = 5 mA, IO = 200 mA VOFF = 80 V, Ta = 50°C V = 0, f = 100 MHz, t < 10 s f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 10 V (See note 2.)
IF
Note:
2. Turn-ON and Turn-OFF Times
IF 1 2 4 3 RL VDD VOUT
Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance between I/O terminals Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF
VOUT
10% t ON
90% t OFF
■ Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --25 --------Typical Maximum 64 30 200 60 V mA mA °C Unit
Continuous load current (AC peak/DC) IO Operating temperature Ta
150
MOS FET Relays
G3VM-81GR1
■ Engineering Data
LED forward current vs. Ambient temperature IF - Ta
LED forward current IF (mA) Continuous load current I O (mA)
100
Continuous load current vs. Ambient temperature IO - Ta
LED forward current I F (mA)
500
100 50 30 10 5 3 1 0.5 0.3
LED forward current vs. LED forward voltage IF - VF
Ta = 25 °C
80
400
60
300
40
200
20
100
0 -20
0
20
40
60
80
100
120
0 -20
0
20
40
60
80
100
120
0.1 0.6
0.8
1
1.2
1.4
1.6
1.8
Ambient temperature Ta (
)
Ambient temperature Ta
LED forward voltage VF (V)
Continuous load current vs. On-state voltage IO - VON
Continuous load current IO (mA)
200 100 Ta Ta = 25 IF = 5mA
On-state resistance vs. Ambient temperature RON - Ta
On-state resistance RON (Ω)
20 IO = 200 mA =200mA IF =5mA, t
很抱歉,暂时无法提供与“G3VM-81GR1”相匹配的价格&库存,您可以联系我们找货
免费人工找货