G3VM-81GR1TR

MOS FET Relays G3VM-81GR1 New MOS FET Relay Designed for Switching Minute and Analog Signals, SOP Package. • New model for 80-V loads. • Low C × R of 32.5 pF•Ω. • Dielectric strength of 1,500 Vrms between I/O. • RoHS compliant ■ Application Examples • Broadband systems • Measurement devices and Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 80 VAC Model G3VM-81GR1 G3VM-81GR1(TR) Number per stick 100 --Number per tape --2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-81GR1 4.4±0.25 3.9±0.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 2.54±0.25 0.1±0.1 0.6±0.3 7.0±0.4 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-81GR1 4 3 1 2 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-81GR1 6 to 6.3 1.2 0.8 2.54 MOS FET Relays G3VM-81GR1 149 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Symbol IF IFP Δ IF/°C VR Tj 50 1 −0.5 5 125 80 200 −2.0 125 1,500 −20 to +85 Rating Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C Ta ≥ 25°C Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Output Load voltage (AC peak/DC) VOFF Continuous load current ON current reduction rate Connection temperature IO Δ IO/°C Tj Dielectric strength between input and VI-O output (See note 1.) Ambient operating temperature Storage temperature Soldering temperature Ta Tstg --- −40 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --15 --5 0.5 6.5 0.7 --0.13 0.17 Maximum 1.3 10 --3 8 1 11 ----0.5 0.5 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 200 mA IF = 5 mA, IO = 200 mA VOFF = 80 V, Ta = 50°C V = 0, f = 100 MHz, t < 10 s f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 10 V (See note 2.) IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 4 3 RL VDD VOUT Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance between I/O terminals Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --25 --------Typical Maximum 64 30 200 60 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 150 MOS FET Relays G3VM-81GR1 ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 500 100 50 30 10 5 3 1 0.5 0.3 LED forward current vs. LED forward voltage IF - VF Ta = 25 °C 80 400 60 300 40 200 20 100 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) 200 100 Ta Ta = 25 IF = 5mA On-state resistance vs. Ambient temperature RON - Ta On-state resistance RON (Ω) 20 IO = 200 mA =200mA IF =5mA, t