G3VM-81HR(TR)

G3VM-81HR MOS FET Relays Higher power, 1.25-A switching with a 80-V load voltage, SOP package. Low 110-mΩ ON Resistance. • Continuous load current of 1.25 A. (Connection C: 2.5 A) RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections 6 • Communication equipment 5 4 • Test & Measurement equipment OMRON logo • Data loggers Model name 932 Pin 1 mark • Industrial equipment 1 LOT.No. 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SOP6 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 80 V Model Minimum package quantity Number per tube Number per tape and reel G3VM-81HR G3VM-81HR (TR) 75 - - 2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF Unit mA mA/°C V °C V TJ Rating 50 −0.5 5 125 80 1250 1250 2500 −12.5 −12.5 −25.0 125 VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C IO ∆IO/°C Measurement conditions Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A mA mA/°C Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C Connection B °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 2 5 Connection A 0.11 0.15 Maximum resistance Connection B RON 0.06 0.08 with output ON Connection C 0.03 0.04 Current leakage when the relay is open ILEAK 1.2 1.5 Capacity between terminals Coff 460 1000 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 2.0 3.0 Turn-OFF time tOFF 0.7 1.0 1 Unit V µA pF mA Ω Ω Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 6 RL IO = 1250 mA VDD IF = 5 mA, IO = 1250 mA VOUT 2 4 IF = 5 mA, IO = 1250 mA IF = 5 mA, IO = 2500 mA VOFF = 20 V, Ta = 50 °C V = 0, f = 100 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) Load DC Load DC G3VM-81HR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 64 Unit V Operating LED forward current IF 5 - 30 mA Continuous load current (AC peak/DC) IO - - 1250 mA Ambient operating temperature Ta 25 - 60 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 100 80 60 40 1250 1000 750 500 Ta = 25°C 50 30 10 5 3 1 250 0 0.3 0 -20 0 20 40 60 80 100 120 0.1 -20 0 20 40 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 60 80 100 120 0.6 0.8 1 On-state resistance vs. Ambient temperature 500 0 IO = 1250 mA IF = 5 mA t < 1s 0.08 0.07 0.06 -500 0.05 -1,000 1.8 IFT - Ta 0.10 0.09 1.6 Trigger LED forward current vs. Ambient temperature Trigger LED forward current IFT (mA) On-state resistance RON (Ω) Ta = 25°C IF = 5 mA 1000 1.4 LED forward voltage VF (V) RON - Ta 1500 1.2 Ambient temperature Ta (°C) IO - VON Continuous load current IO (mA) 100 0.5 20 5 IO = 1250 mA t < 1s 4 3 2 1 0.04 -1,500 0 0.03 -0.4 -0.2 0 0.2 -20 0.4 0 20 On-state voltage VON (V) Turn ON, Turn OFF time vs. LED forward current 60 300 tOFF 100 30 50 20 100 300 40 60 80 100 Current leakage vs. Ambient temperature ILEAK - Ta 3000 tON 1000 500 300 10 3 1 0.3 VOFF = 80 V tOFF 0.1 VOFF = 50 V VOFF = 20 V 100 0.03 VDD = 20 V RL = 200 Ω IF = 5 mA 50 50 10 0 Ambient temperature Ta (°C) Current leakage ILEAK (nA) Turn ON, Turn OFF time tON, tOFF (µs) Ta = 25°C VDD = 20 V RL = 200 Ω 500 5 -20 100 tON, tOFF - Ta 1000 3 80 Turn ON, Turn OFF time vs. Ambient temperature 3000 tON 40 Ambient temperature Ta (°C) tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (µs) IF - VF 1500 LED forward current IF (mA) Continuous load current IO (mA) LED forward current IF (mA) IF - Ta LED forward current vs. LED forward voltage -20 0 LED forward current IF (mA) 20 40 60 80 0.01 100 Ambient temperature Ta (°C) -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions SOP6 type ■ Appearance SOP (Small Outline Package) SOP6 OMRON logo Model name 932 Pin 1 mark LOT.No. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.13 g 4.4±0.25 (Recommended Value, TOP VIEW) 2.1 max. 6.3±0.25 6 to 6.3 1.2 0.15 0.8 2.54±0.25 0.1±0.1 0.4±0.1 Note: The actual product is marked differently from the image shown here. 0.6±0.3 7.0±0.4 2.54 2.54 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K179-E1-01 0412(0412)(O)