G3VM-S5_10

MOS FET Relays G3VM-S5 Analog-Switching MOS FET Relay in 200-V Load Voltage Series, SOP Package. • Ideal replacement for the dial-pulse relay or hook relay for modems and facsimile machines. • Ideal for application to the line interface blocks of PBX and telephone exchange systems. • Can be applied to hybrid IC circuits and card-type modems conforming to PCMCIA standards. • Peak load voltage of 200 V. • Approved standards: UL1577 (File No. E80555) • RoHS Compliant. Note: The actual product is marked differently from the image shown here. ■ Application Examples • PBX subscriber interfaces • Multi-functional telephones • Card-type modems and fax modems • Built-in modems in personal computers ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 200 VAC Model G3VM-S5 G3VM-S5(TR) Number per stick 100 --Number per tape --2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-S5 4.4±0.25 3.9±0.2 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 0.1±0.1 0.6±0.3 2.54±0.25 7±0.4 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-S5 4 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-S5 6 to 6.3 1.2 1 2 0.8 2.54 MOS FET Relays G3VM-S5 157 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Symbol IF IFP Δ IF/°C VR Tj Rating 50 1 −0.5 5 125 200 150 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Load voltage (AC peak/DC) VOFF Continuous load current ON current reduction rate Connection temperature IO Δ ION/°C −1.5 Tj 125 1,500 −40 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +100 °C 260 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --30 1 5 Maximum 1.3 10 --3 8 Unit V μA pF mA Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 150 mA IF = 5 mA, IO = 500 mA VOFF = 200 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) IF Note: 2. Turn-ON and Turn-OFF Times IF 1 2 4 3 RL VDD VOUT Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF 0.00045 1.0 100 0.8 --0.6 0.1 ------1.5 1.0 VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 Typical 150 7.5 ----Maximum 200 25 120 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 158 MOS FET Relays G3VM-S5 ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 350 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 30 300 250 200 80 10 60 3 40 150 100 50 0 − 20 1 20 0.3 0 − 20 0 20 40 60 80 100 0 20 40 60 80 100 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 200 Ta= 25°C A Connection IF = 5mA 100 On-state resistance vs. Ambient temperature RON - Ta 10 IO = 200mA IF = 5mA 8 t < 1s Trigger LED forward current vs. Ambient temperature IFT - Ta Trigger LED forward current I F T (mA) 5 IO = 200mA t < 1s 4 6 3 0 4 2 − 100 2 1 − 200 −3 −2 −1 0 1 2 3 0 − 20 0 20 40 60 80 100 0 − 40 − 20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta ( ) Ambient temperature Ta ( ) Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF Turn ON, Turn OFF time tON, tOFF (μS) tON 1000 Ta = 25°C VDD= 20V RL= 200Ω Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (μS) VDD= 20V RL= 200Ω 1000 IF= 5mA Current leakage vs. Ambient temperature I LEAK - Ta Current leakage ILEAK (nA) 100 VOFF= 200V 3000 3000 30 300 300 t ON 10 100 tOFF 30 100 30 t OFF 3 10 1 3 5 10 30 50 100 300 500 10 − 40 − 20 0 20 40 60 80 100 1 − 20 0 20 40 60 80 100 120 LED forward current IF (mA) Ambient temperature Ta ( Ambient temperature Ta ( ) MOS FET Relays G3VM-S5 159 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X302-E-1 12/10 Specifications subject to change without notice Printed in USA MOS FET Relays G3VM-S5