G4Q212SAC100110

Ratchet Relay G4Q CSM_G4Q_DS_E_3_2 Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation • Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input and is thus ideal for alternate operation or transfer/switching operation of a motor. • Positive operation is assured due to the unique ratchet mechanism. • Satisfies dielectric strength of 2,000 VAC. • Low power consumption. (AC: approx. 6.4 VA; DC: approx. 3.9 W) Ordering Information When your order, specify the rated voltage. Open Models Plug-in Models Item DPDT Model Basic model G4Q-211A Item DPDT Rated voltage 24 VAC Model Basic model G4Q-212S Rated voltage 12 VAC 50 VAC 24 VAC 100/(110) VAC 50 VAC 200/(220) VAC 100/(110) VAC 12 VDC 200/(220) VAC 24 VDC 12 VDC 100 VDC 24 VDC 100 VDC 200 VDC Note: When ordering, add the rated coil voltage (listed in Specifications) to the model number. Example: G4Q-211A, 24 VAC Rated coil voltage Model Number Legend G4Q-@@@@ 1 2 3 4 1. Contact Form 2: DPDT 2. Contact Type 1: Single 3. Enclosure Construction 1: No casing 2: Casing 4. Terminal Shape A: Solder S: Plug-in 1 G4Q ■ Accessories (Order Separately) DIN track/Front-connecting Socket Back-connecting Socket Screw terminal Solder terminal 8PFA1 PL08 Specifications ■ Coil Ratings Item Current (mA) Rated voltage (V) AC 50 Hz 614 531 2.24 24 307 266 8.7 50 148 128 42.7 100/ (110) 74 64/73.5 160 200/ (220) 37 32/36.8 671 Item Current (mA) 50 Hz Must release Max. voltage % of rated voltage 12 Rated voltage (V) DC Resistance () Must operate 60 Hz 80 % max. Resistance () Must operate 60 Hz 10 % min. 110 % max. Must release Power consumption Initial Max. voltage Approx. 13.5 VA Rated Approx. 6.4 VA Power consumption % of rated voltage 12 320 37.5 24 155 155 100 39 2,580 200 19.2 10,400 80 % max. 5 % min. 110 % max. Approx. 3.9 W Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with tolerances of +15%/–20% for AC rated current and 15% for DC coil resistance. 2. The AC coil resistance values are for reference only. 3. Performance characteristic data is measured at a coil temperature of 23C. 4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of 23C and not continuously. 5. The AC power consumption is measured at 60 Hz. ■ Contact Ratings Load 2 Resistive load (cos = 1) Inductive load (cos= 0.4) (L/R = 7 ms) 3 A at 220 VAC, 4 A at 24 VDC Contact mechanism Single Contact material Silver alloy Rated load 5 A at 220 VAC, 5 A at 24 VDC Rated carry current 5A Max. switching voltage 250 VAC, 250 VDC Max. switching current 5A G4Q ■ Characteristics Contact resistance (See note 2.) 50 m max. Operate time (See note 3.) 60 ms max. Max. operating frequency Mechanical: Electrical: 1,200 operations/hr 1,200 operations/hr (under rated load) Insulation resistance (See note 4.) 100 M min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between coil and contact (1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity) (2,000 VAC between contacts of different polarities) Vibration resistance Destruction: Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 10 to 55 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: Malfunction: 500 m/s2 100 m/s2 Endurance Mechanical: Electrical: 5,000,000 operations min. (at operating frequency of 1,200 operations/hr) 500,000 operations min. (under rated load and at operating frequency of 1,200 operations/hr) (See note 5.) Error rate (See note 6.) 1 A at 5 VDC (0.1 A at 5 VDC) Ambient temperature Operating: Ambient humidity Operating: –10C to 55C (with no icing or no condensation) 5% to 85% Weight Open model: Approx. 240 g; cased model: Approx. 340 g Note: 1. 2. 3. 4. The data shown above are initial values. The contact resistance was measured with 0.1 A at 5 VDC using the voltage drop method. The operate time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature of 23C. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength. 5. The electrical endurance was measured at an ambient temperature of 23C. 6. This value was measured at a switching frequency of 60 operations per minute. The value in parentheses is for the cased model. Engineering Data Switching current (A) DC resistive load AC resistive load AC inductive load (cosφ = 0.4) DC inductive load L/R = 7 ms Electrical Endurance Endurance (x103 operations) Maximum Switching Power 10,000 7,000 5,000 3,000 1,000 700 500 220 VAC resistive load 24 VDC resistive load 24VDC inductive load L/R = 7 ms 300 100 70 50 220 VAC inductive load (cosφ = 0.4) 30 Switching voltage (V) Switching current (A) 3 G4Q Ambient Temperature vs. Coil Temperature Rise Malfunctioning Shock 24 VDC Contact carry current: 5 A Coil temperature rise ( °C) Coil temperature rise ( ° C) 100 VAC 50 Hz Contact with no carry current Contact carry current: 5 A Contact with no carry current Not energized Energized Ambient temperature (°C) Unit: m/s2 Ambient temperature (°C) Shock direction Number of samples: 5 Measurement conditions: Impose a shock of 100 m/s2 in the ±X, ±Y, and ±Z directions three times each with the Relay energized and not energized to check the shock values that cause the Relay to malfunction. Operation Operation Timing Chart 100 ms min. Coil terminal Contact terminal (NO) (1−3, 8−6) Contact terminal (NC) (1−4, 8−5) Note: When a pulse for application to the coil is used, such a pulse should have a width of 100 ms or more. If a pulse is applied with a width less than the operate time, the cam may fail to rotate fully. Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement/ Internal Connections Open Model G4Q-211A Mounting Holes 58±0.2 66.5 max. 58 Four, 3.5-dia. mounting holes 4 25 56 max. 25±0.2 65 max. Four, M3 mounting screw holes or four 3.5-dia. holes G4Q Plug-in Terminal Model G4Q-212S Terminal Arrangement/ Internal Connections (Bottom view) 3.5 92.5 max. 71.5 max. 30.5 7 80 max. 63.5 max. Relay Mounting Height with Socket With Front-connecting Socket 102 G4Q212S 100 8PFA1 With Back-connecting Socket 80 G4Q212S PL08 Safety Precautions Refer to Safety Precautions for All Relays. ■ Surface Mounting Socket Be sure to provide a mounting space according to the width of the Relay. The width of the Relay is 63.5 mm and the width of the Socket is 51 mm. ■ Mounting Mount the Relay so that the coil faces upward and the cam faces downwards with the mounting plate secured vertically. Do not change the cam angle. Make sure that Relay terminals are free of flux or any other foreign substance before soldering the Relay terminals. Coil Cam ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 5 G4Q OMRON Corporation Industrial Automation Company Authorized Distributor: Kyoto, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, 2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC 2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2016 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. J070-E2-04A-X 1016