G6RL-1-ASI

PCB Relay G6RL Low-profile power relay with maximum switching of 10 A • Low profile: 12.3 mm in height • Max. switching capacity: 2,500 VA (NO) • IEC 60947-5-1, AC-15, DC13 • Clearance and creepage distance: 10 mm. • Models with high shock resistance (250 m/s2) are available. • Models for P1 load (2 × 200 W lamps parallel to ignition transformer) are available. • RoHS Compliant Applications: Boilers, PLCs, I/O ports, timers, and temperature controllers Ordering Information Classification Standard Enclosure rating Flux protection Fully sealed P1 Load Shock resistance Flux protection Flux protection Fully sealed Contact form SPST-NO SPDT SPST-NO SPDT SPST-NO SPDT SPST-NO SPDT SPST-NO SPDT Note: When ordering, add the rated coil voltage to the model number. Contact material AgSnIn G6RL-1A-ASI G6RL-1-ASI G6RL-1A4-ASI G6RL-14-ASI G6RL-1A-ASI-PL G6RL-1-ASI-PL --G6RL-1-SR-ASI --G6RL-14-SR-ASI G6RL-1A G6RL-1 ----------------AgNi Examples: G6RL-1A DC12 Rated coil voltage ■ Model Number Legend: G6RL-@@@-@-@-@ DC@ 123 4 5 6 7 5. Contact material None: AgNi ASI: AgSnIn 6. Special Function 2 PL: P1 load (See note.) 7. Rated Coil Voltage 3, 5, 6, 12, 24, or 48 Note: Please refer to Endurance Under Real Load table in this datasheet. 1. Number of Poles 1: 1 pole 2. Contact Form/Contact Construction None: SPDT A: SPST-NO 3. Enclosure Rating None: Flux protection 4: Fully sealed 4. Special Function 1 SR: Shock resistance of 25G PCB Relay G6RL 179 Specifications ■ Coil Ratings Classification Rated voltage Rated current Coil resistance 3 VDC 73.3 mA 40 Ω 5 VDC 44 mA 113 Ω Standard, P1 load 6 VDC 36.7 mA 163 Ω 12 VDC 18.3 mA 654 Ω 24 VDC 9.2 mA 2,618 Ω 48 VDC 5 mA 9,600 Ω 3 VDC 101 mA 30 Ω 5 VDC 60.2 mA 83 Ω Shock resistance 6 VDC 50.1 mA 120 Ω 12 VDC 25.2 mA 476 Ω 24 VDC 12.6 mA 1,912 Ω Must operate voltage 70% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage Power consumption 150% of rated voltage Approx. 220 mW Approx. 240 mW 80% max. of rated voltage 10% min. of rated voltage 150% of rated voltage (23°C) Approx. 300 mW Note: 1. The above items are measured at a coil temperature of 23°C. 2. The tolerance of the rated current is ±10%. ■ Contact Ratings Load Rated load (See note 1.) Resistive load (cos φ = 1) 10 A at 250 VAC, NO resistive load 8 A at 250 VAC, resistive load 5 A at 30 VDC, resistive load 10 A at 250 VAC 5 A at 30 VDC 400 VAC, 300 VDC NO: 10 A, NC: 8 A NO: 2,500 VA, NC: 2,000 VA 150 W Rated carry current Max. switching voltage Max. switching current Max. switching power Failure rate (reference value) 10 mA at 5 VDC (P level) (See note 2.) Note: 1. G6RL-1(A), G6RL-1(A)4-ASI: 8 A 250 VAC, resistive load; 5 A 24 VDC resistive load. 2. P level: λ 60 = 0.1 × 10−6 / operations ■ Characteristics Contact resistance Operate time Release time Insulation resistance Dielectric strength Impulse withstand voltage Vibration resistance 100 mΩ max. 10 ms max. (SR Models: 15 ms max.) 5 ms max. 1,000 MΩ min. (at 500 VDC) 5,000 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity 10 kV between coil and contacts (1.2 × 50 μs) Destruction: Malfunction: 10 to 55 to 10 Hz, 1.5-mm double amplitude 10 to 55 to 10 Hz, 0.825-mm single amplitude (1.65-mm double amplitude) when energized. 10 to 55 to 10 Hz, 0.4-mm single amplitude (0.8-mm double amplitude) when not energized. Shock resistance Destruction: 1,000 m/s2 Malfunction: NO: 200 m/s2, NC: 50 m/s2 when not energized SR Models: 250 m/s2 (NO and NC) when not energized Mechanical: 10,000,000 operations min. (at 18,000 operations/hr) Operating: −40°C to 85°C (with no icing) Operating: 5% to 85% Approx. 7.8 g Endurance Ambient temperature Ambient humidity Weight 180 PCB Relay G6RL ■ Other Data Construction of protection Insulation material group Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Creepage distance Clearance distance RoHS Tracking index of relay base Flux protection IIIa 250 V 3 250 V III 10 mm 10 mm Compliant PTI 250 2 400 V Fully sealed Flammability class according to UL94 V-0 Flammability-flame GWFI (IEC 60695-2-12) GWIT (IEC 60695-2-13) Ball pressure test (IEC 60695-10-2) 850°C 750°C 170°C ■ Approved Standards UL Recognized (File No. E41643) - - Ambient Temp. = 85°C Models G6RL-1A G6RL-1 G6RL-1A(4)-ASI G6RL-1(4)-ASI G6RL-1(4)-SR-ASI Contact form SPST-NO SPDT SPST-NO SPDT SPDT 3 to 24 VDC Coil rating 3 to 48 VDC Contact rating 10 A at 250 VAC (NO) (Resistive) 6,000 operations 8 A at 250 VAC (Resistive) 5 A at 30 VDC (Resistive) VDE (EN61810-1) (Certificate No.C266) Models G6RL-1A-(ASI) G6RL-1-(ASI) Contact form SPST-NO SPDT Coil rating Contact rating Model 30,000 operations at 85°C 50,000 operations at 85°C 10,000 operations at 85°C 10,000 operations at 85°C 10,000 operations at 85°C 10,000 operations at 85°C 3, 5, 6, 12, 24, or 48 VDC 10 A at 250 VAC (NO) 10,000 operations at 85°C 8 A at 250 VAC 5 A at 30 VDC G6RL-1A4-ASI (See note.) G6RL-14-ASI (See note.) SPST-NO SPDT 3, 5, 6, 12, 24, or 48 VDC 10 A at 250 VAC (NO) 10,000 operations at 85°C 8 A at 250 VAC 5 A at 30 VDC G6RL-1(4)-SR-ASI SPDT 3, 5, 6, 12 or 24 VDC 10 A at 250 VAC (NO) 10,000 operations at 85°C 8 A at 250 VAC 5 A at 30 VDC Note: In progress PCB Relay G6RL 181 VDE (60947-5-1) (Certificate No. C266) Models G6RL-1(A) AC15 (NO) AC15 (NO) AC15 (NO) DC13 DC13 (See note.) G6RL-1(A)-ASI G6RL-1(A)4-ASI (See note.) G6RL-1(4)-SR-ASI AC15 AC15 AC15 DC13 DC13 (See note.) Note: 1. In progress 2. All ratings are valid at Room Temperature Contact rating Utilization category Ie: 3 A, Ithe: 10 A (A300) Ie: 3 A, Ithe: 5 A (B300) Ie: 1.5 A, Ithe: 5 A (B300) Ie: 0.22A, Ithe: 1A (R150) Ie: 0.1 A, Ithe: 1 A (R300) Ie: 3 A, Ithe: 10 A (A300) Ie: 3 A, Ithe: 5 A (B300) Ie: 1.5 A, Ithe: 5 A (B300) Ie: 0.22 A, Ithe: 1 A (R150) Ie: 0.1 A, Ithe: 1 A (R300) Rated voltage (V) AC240 AC120 AC240 DC125 DC250 AC240 AC120 AC240 DC125 DC250 Operations 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 VDE (60947-4-1) (Certificate No. C266) Models G6RL-1(A) G6RL-1(A)-ASI (See note.) AC1 AC3 DC1 DC3 Note: 1. In progress 2. All ratings are valid at Room Temperature Contact rating Utilization category 8A 2A 5A 2A Rated voltage (V) AC250 AC250 DC24 DC24 Operations 6,000 6,000 6,000 6,000 VDE (EN60730-1) (Certificate No. C266) Models G6RL-1(A) 2 (2) A 8 (4) A (NO) 6 (4) A (NO) 6 (4)A (NO) 6 (4) A (NC) G6RL-1(A)-ASI (See note.) 2 (2) A 8 (4) A (NO) 6 (4) A (NO) 6 (4) A (NC) Note: In progress Contact rating Utilization category 65°C 85°C 85°C (See note.) 65°C 65°C 65°C 85°C 85°C 65°C Rated voltage (V) AC250 AC250 AC250 AC250 AC250 AC250 AC250 AC250 AC250 Operations 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 182 PCB Relay G6RL Electrical Endurance Data G6RL-1(A) 8 A at 250 VAC (cosφ = 1) NO 8 A at 250 VAC (cosφ = 1) NC 5 A at 24 VDC G6RL-1(A)-(SR)-ASI-(PL) 10 A at 250 VAC (cosφ = 1) NO 8 A at 250 VAC (cosφ = 1) 5 A at 30 VDC G6RL-1(A)4-ASI 8 A at 250 VAC (cosφ = 1) NO 8 A at 250 VAC (cosφ = 1) NC 5 A at 24 VDC G6RL-14-SR-ASI 8 A at 250 VAC (cosφ = 1) NO 3 A at 250 VAC (cosφ = 1) NC 5 A at 24 VDC NO 5 A at 24 VDC NC 50,000 operations min. 50,000 operations min. 50,000 operations min. 100,000 operations min. 100,000 operations min. 50,000 operations min. 50,000 operations min. 50,000 operations min. 50,000 operations min. 50,000 operations min. 100,000 operations min. 50,000 operations min. 30,000 operations min. Endurance Under Real Load G6RL-1(A)-ASI-PL Rated voltage 230 VAC Condition (Reference Only) Frequency 1.5 s ON/4.5 s OFF Electrical life 250,000 operations P1 load (2 × 200 W lamps parallel to ignition transformer) Note: The results shown reflect values measured using very severe test conditions, i.e., Duty: 1 s ON/OFF. Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed information for the electrical endurance under your test conditions. PCB Relay G6RL 183 Engineering Data G6RL-1(A)(4)-(SR)-(ASI)-(PL) Maximum Switching Capacity Switching current (A) G6RL-1(A) Endurance Switching operations ( 103 operations) 1,000 500 300 250-VAC resistive load (N.O.) 250-VAC inductive load (cos φ = 0.4) 100 50 DC resistive load 10 5 AC resistive load (N.O.) AC resistive load (N.C.) 100 1 0.5 50 30 24-VDC resistive load 0.1 1 3 5 10 30 50 100 300 500 1,000 Switching voltage (V) 10 0 2 4 6 8 10 Switching current (A) G6RL-1(A)(4)-(SR)-(ASI)-(PL) Ambient Temperature vs. Maximum Coil Voltage Maximum coil voltage (%) 200 180 G6RL-1 (220 mW) 160 150 140 G6RL-1(A)(4)-(ASI)-(PL) Ambient Temperature vs. Must Operate or Must Release Voltage On the basis of rated voltage (%) 120 Sample: G6RL 24 VDC Number of relays: 5 100 max. X min. Must operate voltage Must release voltage 80 60 120 G6RL-1-SR (300 mW) 100 40 max. X min. 80 60 −40 20 20 23 30 40 50 60 70 80 90 100 0 −40 −20 0 20 40 60 80 100 Ambient temperature (°C) Ambient temperature (°C) Note: The “maximum coil voltage” refers to the maximum value in a varying range of operating voltage, not a continuous voltage. Dimensions Note: All units are in millimeters unless otherwise indicated. G6RL-1A(-ASI) G6RL-1A4(-ASI) 28.5 max. 10.0 max. Terminal Arrangement/ Internal Connections (Bottom View) Mounting Holes (Bottom View) (2.9) 18.9±0.1 5±0.1 (1.7) 1 2 5 0.4 0.24 0.4 0.8 0.8 3.2 3 ± .3 ,1 ur 1 0. a. di 7.62±0.1 12.3 max. Fo Note: Indicates average dimensions. G6RL-1(-ASI) G6RL-14(-ASI) 28.5 max. 10.0 max. Terminal Arrangement/ Internal Connections (Bottom View) Mounting Holes (Bottom View) (1.5) 18.9±0.1 3.2±0.1 3.2±0.1 (1.7) 1 5 4 2 3 dia . 0.24 12.3 max. 0.8 Fiv e, 1 0.4 0.4 0.4 0.8 Note: Indicates average dimensions. 184 PCB Relay G6RL 7.62±0.1 3.2 .3± 0.1 Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller’s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. PCB Relay G6RL Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X301-E-1 06/09 Specifications subject to change without notice Printed in USA PCB Relay G6RL