G6ZU-1PE-ADC4.5

G6Z Surface-mounting High-frequency Relay Surface-mounting, 3-GHz-Band, Miniature, SPDT, High-frequency Relay • Superior high-frequency characteristics, such as an isolation of 30 dB min., insertion loss of 0.5 dB max., and V.SWR of 1.5 max. at 2.6 GHz. • Surface-mounting terminals and superior high frequency characteristics combined using semi triplate strip transmission lines. • Miniature dimensions of 20 × 8.6 × 8.9 mm (L × W × H). • Choose from a lineup that includes single-winding latching models (200 mW), double-winding latching models (360 mW), and models with a reverse contact arrangement. • Series includes models with an E-shape terminal structure (same as existing models), and models with a Y-shape terminal structure, allowing greater freedom with PCB design. • Models with 75-Ω impedance and models with 50-Ω impedance are available. RoHS Compliant G 6 Z ■Model Number Legend ■Application Examples G 6 Z@ -@ @ @ -@ @ — ——— —— These Relays can be used for switching signals in media equipment. • Wire communications: Cable TV (STB and broadcasting infrastructure), cable modems, and VRS (video response systems) • Wireless communications:Transceivers, ham radios, car telephones, ETC, ITS, high-level TV, satellite broadcasting, text multiplex broadcasting, pay TV, mobile phone stations, TV broadcasting facilities, and community antenna systems • Public equipment: TVs, TV games, satellite radio units, car navigation systems • Industrial equipment: Measuring equipment, test equipment, and multiplex transmission devices 1 2 3 4 5 6 1. Relay Function None: Single-side stable U: Single-winding latching K: Double-winding latching 2. Contact Form 1: SPDT (1c) 3. Terminal Shape F: Surface-mounting terminals P: PCB terminals 4. Terminal arrangement None: Y-shape terminal structure E: E-shape terminal structure 5. Characteristic Impedance None: 75 Ω A: 50 Ω 6. Contact Arrangement None: Standard contact arrangement R: Reverse contact arrangement ■Ordering Information ●Standard Models with PCB Terminals Relay Function Enclosure rating Contact form Terminal arrangement E-shape Singleside stable Y-shape E-shape Singlewinding latching Fully sealed SPDT (1c) Y-shape E-shape Doublewinding latching Y-shape Characteristic impedance Model Rated coil voltage 75 Ω G6Z-1PE 3, 4.5, 5, 9, 12, 24 VDC 50 Ω G6Z-1PE-A 3, 4.5, 5, 9, 12, 24 VDC 75 Ω G6Z-1P 3, 4.5, 5, 9, 12, 24 VDC 50 Ω G6Z-1P-A 3, 4.5, 5, 9, 12, 24 VDC 75 Ω G6ZU-1PE 50 Ω G6ZU-1PE-A 75 Ω G6ZU-1P 50 Ω G6ZU-1P-A 75 Ω G6ZK-1PE 50 Ω G6ZK-1PE-A 75 Ω G6ZK-1P 50 Ω G6ZK-1P-A 3, 4.5, 5, 9, 12, 24 VDC Minmum packing unit 25 pcs/tube 3, 4.5, 5, 9, 12, 24 VDC Note. Please add the coil rated voltage (V) to the model number when ordering. Example: G6Z-1PE DC3 In addition, the delivered product and its package will be marked with voltage specification as "@@VDC". 1 G6Z Surface-mounting High-frequency Relay ●Standard Models with Surface-mounting Terminals Relay Function Enclosure rating Contact form Terminal arrangement E-shape Singleside stable Y-shape E-shape Singlewinding latching SPDT (1c) Fully sealed Y-shape E-shape Doublewinding latching Y-shape G 6 Z Characteristic impedance Rated coil voltage Model 75 Ω G6Z-1FE 50 Ω G6Z-1FE-A 75 Ω G6Z-1F 50 Ω G6Z-1F-A 75 Ω G6ZU-1FE 50 Ω G6ZU-1FE-A 75 Ω G6ZU-1F 50 Ω G6ZU-1F-A 75 Ω G6ZK-1FE 50 Ω G6ZK-1FE-A 75 Ω G6ZK-1F 50 Ω G6ZK-1F-A Minmum packing unit Minimum ordering unit (Tape packing) 25 pcs/tube (300 pcs/ reel) 300 pcs/reel 3, 4.5, 5, 9, 12 and 24 VDC 3, 4.5, 5, 9, 12 and 24 VDC 3, 4.5, 5, 9, 12 and 24 VDC Note 1. Please add the coil rated voltage (V) to the model number when ordering. Example: G6Z-1PE DC3 In addition, the delivered product and its package will be marked with voltage specification as "@@VDC". Note 2. When ordering Relays in tape packing (surface mounting terminal models), add "-TR" to the end of the model number. This specification, however, is not part of the relay model number, so it is not marked on the relay case. (If "-TR" is not added to the end of the model number, the Relays will be provided in tube packing.) Note 3. Consult your OMRON representative for reverse contact models. ■Ratings ●Coil: Single-side Stable Models (G6E-2P(E), G6Z-1F(E)) Raged voltage Rated current (mA) Coil resistance (Ω) 3 VDC 66.7 45 4.5 VDC 44.4 101 5 VDC 40.0 125 9 VDC 22.2 405 12 VDC 16.7 720 24 VDC 8.3 2,880 Must operate voltage Must release voltage (V) (V) Maximum voltage (V) % of rated voltage 75% max. 10% min. 150% Must reset voltage (V) Maximum voltage (V) Power consumption (mW) Approx. 200 ●Coil: Single-winding Latching Models (G6ZU-1P(E), G6ZU-1F(E)) Raged voltage Rated current (mA) Coil resistance (Ω) 3 VDC 66.7 45 4.5 VDC 44.4 101 5 VDC 40.0 125 9 VDC 22.2 405 12 VDC 16.7 720 24 VDC 8.3 2,880 Must set voltage (V) % of rated voltage 75% max. 75% max. 150% Must reset voltage (V) Maximum voltage (V) Power consumption (mW) Approx. 200 ●Coil: Double-winding Latching Models (G6ZK-1P(E), G6ZK-1F(E)) Raged voltage Rated current (mA) Coil resistance (Ω) 3 VDC 120 25 4.5 VDC 80 56 5 VDC 72 69 9 VDC 40 225 12 VDC 30 400 24 VDC 15 1,600 Must set voltage (V) % of rated voltage 75% max. 75% max. 150% Power consumption (mW) Approx. 360 Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. Note 2. The operating characteristics are measured at a coil temperature of 23°C. Note 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously. Note 4. The voltage measurements for operate/release and set/reset are the values obtained for instantaneous changes in the voltage (rectangular wave). 2 G6Z Surface-mounting High-frequency Relay ● Contacts Item * ● High-frequency Characteristics *1 Load Resistive load Rated load 10 mA at 30 VAC 10 mA at 30 VDC 10 W at 900 MHz * Rated carry current 0.5 A Max. switching voltage 30 VAC, 30 VDC Max. switching current 0.5 A Frequency 900MHz TH Item Isolation Insertion loss (not including substrate loss) V.SWR This value is for an impedance of 50Ω or 75Ω with a V.SWR of 1.2 max. Return loss 2.6GHz SMD TH SMD E-shape Y-shape E-shape Y-shape E-shape Y-shape E-shape Y-shape 75 Ω 65 dB min. 50 Ω 60 dB min. 75 Ω 0.2 dB max. 0.5 dB max. 50 Ω 0.1 dB max. 0.3 dB max. 75 Ω 1.2 dB max. 1.5 dB max. 50 Ω 1.1 dB max. 1.3 dB max. 75 Ω 20.8 dB min. 14.0 dB min. 50 Ω 26.4 dB min. 17.7 dB min. Maximum carry power 60dB min. 35 dB min. 45 dB min. 30 dB min. 40 dB min. 10W *2 Note. The above values are initial values. *1. Contact your OMRON representative if the Relay will be used in applications that require high repeatability with high-frequency characteristics in microload regions. *2. These values are for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max. ■Characteristics Relay Function Model Single-side stable models Single-winding latching models Double-winding latching models G6Z-1P(E), G6Z-1F(E) G6ZU-1P(E), G6ZU-1F(E) G6ZK-1P(E), G6ZK-1F(E) Contact resistance *1 100 mΩ max. Operating (set) time 10 ms max. Release (reset) time 10 ms max. − Minimum set/reset pulse time Insulation resistance *2 12 ms 100 MΩ min. (at 500 VDC) Between Coil and contacts 1,000 VAC, 50/60 Hz for 1 min Between ground and coil/contacts 500 VAC, 50/60 Hz for 1 min Between Contacts of the same polarity 500 VAC, 50/60 Hz for 1 min Vibration resistance Destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Shock resistance Destruction 1,000 m/s2 Malfunction 500 m/s2 Mechanical 1,000,000 operations min. (at 36,000 operations/hour) Electrical 300,000 operations min. (30 VAC, 10 mA/30 VDC, 10 mA), 100,000 operations min. (900 MHz, 10 W) at a switching frequency of 1,800 operations/hour Dielectric strength Durability G 6 Z Ambient operating temperature -40°C to 70°C (with no icing or condensation) Ambient operating humidity 5% to 85% RH Weight Approx. 2.8 g Note. The above values are initial values. *1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. *2. The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checkingthe dielectric strength. 3 G6Z Surface-mounting High-frequency Relay ■Engineering Data ● Ambient Temperature vs. Must Operate or Must Release Voltage On the basis of rated voltage (%) Maximum voltage (%) ● Ambient Temperature vs. Maximum Voltage 250 200 150 100 ● Shock Malfunction Y 100 Sample: G6Z-1P 5 VDC 90 Number of relays: 5 pcs 1,000 Max. estimated value 80 max. 70 60 60 80 100 −40 −20 0 20 Z’ 80 100 Ambient temperature (°C) ● Electrical Durability (with Must Operate and Must Release Voltage) On the basis of rated voltage (%) On the basis of rated voltage (%) 1,000 Y’ Unit: m/s2 Sample: G6Z-1P-A 5 VDC / 50 Ω Number of relays: 5 pcs Conditions: Shock is applied in ±X, ±Y, and ±Z directions three times each with and without energizing the Relays to check for contact malfunctions. 100 Sample: G6Z-1PE 75Ω 5 VDC Number of Relays: 5 pcs Test conditions: 10 mA resistive load at 30 VAC 80 Switching frequency: 1,800 operations/h Must operate max. min. 60 40 Sample: G6Z-1PE 75Ω 5 VDC Number of Relays: 5 pcs Test conditions: 10 mA resistive load at 30 VDC 80 Switching frequency: 1,800 operations/h Must operate max. min. 60 40 Must release Must release max. 20 max. min. 20 min. ● Electrical Durability (Contact Resistance) *1, *2 Contact resistance (mΩ) 0 0.0001 0.001 0.01 0.1 1 10 100 Operating frequency (×103 operations) 1,000 Sample: G6Z-1PE 75Ω 5 VDC 700 Number of Relays: 5 pcs 500 Test conditions: 10 mA resistive load at 30 VAC Switching frequency: 1,800 operations/h 300 0.01 0.1 1 10 100 Operating frequency (×103 operations) ● Electrical Durability (Contact Resistance) *1, *2 NO contact NC contact Contact resistance (mΩ) 0 0.0001 0.001 1,000 Sample: G6Z-1PE 75Ω 5 VDC 700 Number of Relays: 5 pcs 500 Test conditions: 10 mA resistive load at 30 VDC Switching frequency: 1,800 operations/h 300 Contact resistance 70 Contact resistance 50 70 50 max. max. min. min. 30 10 0.001 0.01 NO contact NC contact max. max. 100 100 min. min. *1. The tests were conducted at an ambient temperature of 23°C. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. *2. 30 10 0.001 0.01 0.1 1 10 100 1,000 Operating frequency (×103 operations) 0.1 1 10 100 1,000 Operating frequency (×103 operations) ● External Magnetic Interference S N +20 +10 0 −10 −20 S N +20 +10 0 −10 −20 Sample: G6Z-1P 5 VDC Number of Relays: 5 pcs −30 −1,200 4 (Average value) +30 Change rate on the basis of initial value (%) (Average value) +30 Change rate on the basis of initial value (%) Change rate on the basis of initial value (%) G 6 Z 100 60 800 Y’ Ambient temperature (°C) ● Electrical Durability (with Must Operate and Must Release Voltage) *1, *2 40 1,000 X’ 600 Shock direction X X’ Y Z Must operate voltage Must release voltage 0 −60 400 1,000 Z’ avg. min. 10 40 Z 1,000 200 20 20 De-energized 200 40 50 0 400 50 30 −20 600 X 1,000 avg. min. max. 0 −40 Energized 800 −800 −400 Must operate voltage Must release voltage 0 400 800 1,200 External magnetic field (A/m) (Average value) +30 S N +20 +10 0 −10 −20 Sample: G6Z-1P 5 VDC Number of Relays: 5 pcs −30 −1,200 −800 −400 Must operate voltage Must release voltage 0 400 800 1,200 External magnetic field (A/m) Sample: G6Z-1P 5 VDC Must operate voltage Number of Relays: 5 pcs Must release voltage −30 −1,200 −800 −400 0 400 800 1,200 External magnetic field (A/m) G6Z Surface-mounting High-frequency Relay ● High-frequency Characteristics at 75Ω (Insertion Loss) *1, *2 (Average value (initial value)) Insertion loss (dB) Insertion loss (dB) (Average value (initial value)) 0 Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 20 0 0.2 40 0.4 60 0.6 ● High-frequency Characteristics at 75Ω (Return Loss, V.SWR) *1, *2 (Average value (initial value)) Insertion loss (dB) ● High-frequency Characteristics at 75Ω (Isolation) *1, *2 0 1.7 V . S 1.6 W R Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 10 Return loss 20 1.5 30 1.4 40 1.3 V.SWR 50 80 1.2 0.8 60 0 500 1,000 1,500 1.0 2,000 2,500 3,000 Frequency (MHz) ● High-frequency Characteristics at 50Ω (Isolation) *1, *2 Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 0 500 1,000 (Average value (initial value)) Insertion loss (dB) Insertion loss (dB) Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 20 70 2,000 2,500 3,000 Frequency (MHz) ● High-frequency Characteristics at 50Ω (Insertion Loss) *1, *2 (Average value (initial value)) 0 1,500 N.O N.C 0 0.2 40 0.4 60 0.6 80 0.8 1.1 N.O N.C 0 500 1,000 1,500 1 2,000 2,500 3,000 Frequency (MHz) ● High-frequency Characteristics at 50Ω (Return Loss, V.SWR) *1, *2 (Average value (initial value)) Insertion loss (dB) 100 N.O N.C 0 1.7 V . S 1.6 W R Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 10 20 1.5 Return loss 30 1.4 40 1.3 50 1.2 V.SWR 60 100 N.O N.C 0 500 1,000 1,500 1.0 2,000 2,500 3,000 Frequency (MHz) Sample: G6Z-1PE 75Ω 5 VDC with terminating resistance 0 500 1,000 1,500 N.O N.C 2,000 2,500 3,000 Frequency (MHz) 70 1.1 N.O N.C 0 500 1,000 1,500 1 2,000 2,500 3,000 Frequency (MHz) 25 Must operate Must release time 20 Sample: G6Z-1P 5 VDC 75Ω Number of Relays: 32 pcs Number of contacts Number of contacts ● Must Operate and Must Release Time ● Must Operate and Must Release Distribution *1 Bounce Time Distribution *1 30 Must operate Must release time 25 Sample: G6Z-1P 5 VDC 75Ω Number of Relays: 32 pcs 20 15 15 10 10 5 0 5 1.0 2.0 3.0 4.0 5.0 0 0.5 1.0 1.5 Time (ms) *1. *2. 2.0 Time (ms) The tests were conducted at an ambient temperature of 23°C. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics, including endurance, in the actual machine before use. 5 G 6 Z G6Z Surface-mounting High-frequency Relay ■Dimensions (Unit: mm) ●Models with PCB Terminals G6Z-1PE G6ZU-1PE G6Z-1PE-R PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) G6Z-1PE Six, 1.8-dia. Orientation mark 1 7.62 20 8.6 7 − ＋ Six, 1.0-dia. holes Three, 1.6-dia. Three, 0.8-dia. holes 2.54 14 13 12 11 10 9 8 7.62 15.24 G6ZU-1PE 8.9 Orientation mark 1 3 7 S − ＋ R ＋ − 6-0.6 2.54 3-0.4 7.62 0.2 (Coil terminal) 0.18 7.62 14 13 12 11 10 9 8 15.24 G6Z-1PE-R Orientation mark 1 7 − ＋ G 6 Z 14 Note. Each value has a tolerance of ±0.3 mm. 13 12 11 10 9 8 Note:Check carefully the coil polarity of the Relay. G6Z-1PE-A G6ZU-1PE-A PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) G6Z-1PE-A Nine, 1.8-dia. Orientation mark 1 7 − ＋ Nine, 1.0-dia. holes 7.62 20 14 8.6 13 12 11 10 9 8 2.54 7.62 15.24 G6ZU-1PE-A 8.9 Orientation mark 1 3 9-0.6 2.54 7.62 15.24 0.2 (Coil terminal) 7 S − ＋ R ＋ − 0.18 7.62 14 13 12 11 10 9 8 Note. Each value has a tolerance of ±0.3 mm. Note:Check carefully the coil polarity of the Relay. G6Z-1P G6ZU-1P PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) G6Z-1P Eight, 1.8-dia. Orientation mark 1 7.62 20 8.6 3 4 5 7 10 9 8 5 7 10 9 8 − ＋ Eight, 1.0-dia. holes Three, 1.6-dia. Three, 0.8-dia. holes 2.54 14 13 12 7.62 15.24 G6ZU-1P 8.9 Orientation mark 1 3 8-0.6 2.54 3-0.4 7.62 15.24 0.2 (Coil terminal) 3 4 S − ＋ R ＋ − 0.18 7.62 14 13 12 Note. Each value has a tolerance of ±0.3 mm. Note:Check carefully the coil polarity of the Relay. 6 G6Z Surface-mounting High-frequency Relay G6Z-1P-A G6ZU-1P-A PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) G6Z-1P-A Eleven, 1.8-dia. Orientation mark 1 3 4 5 7 10 9 8 − ＋ Eleven, 1.0-dia. holes 7.62 20 14 8.6 13 12 2.54 7.62 15.24 G6ZU-1P-A 8.9 Orientation mark 1 3 0.2 (Coil terminal) 2.54 0.18 11-0.6 7.62 15.24 5 7 10 9 8 7.62 14 Note. Each value has a tolerance of ±0.3 mm. G6ZK-1PE Terminal Arrangement/Internal Connections (Bottom View) Seven, 1.8-dia. Orientation mark 1 Seven, 1.0-dia. holes 7.62 8.6 13 12 Note:Check carefully the coil polarity of the Relay. PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm 20 3 4 S − ＋ R ＋ − Three, 1.6-dia. Three, 0.8-dia. holes 2.54 − ＋ R − ＋ S 14 13 12 11 6 10 9 G 6 Z 7 8 7.62 Note:Check carefully the coil polarity of the Relay. 15.24 8.9 3 7-0.6 2.54 3-0.4 7.62 15.24 0.2 (Coil terminal) 0.18 7.62 Note. Each value has a tolerance of ±0.3 mm. G6ZK-1PE-A PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Ten, 1.8-dia. Orientation mark 1 Ten, 1.0-dia. holes − ＋ S 7.62 20 14 8.6 − ＋ R 13 12 11 6 10 9 7 8 2.54 7.62 15.24 8.9 Note:Check carefully the coil polarity of the Relay. 3 2.54 10-0.6 7.62 15.24 0.2 (Coil terminal) 0.18 7.62 Note. Each value has a tolerance of ±0.3 mm. 7 G6Z Surface-mounting High-frequency Relay G6ZK-1P PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Nine, 1.8-dia. Orientation mark 1 3 4 7.62 20 8.6 − ＋ S Three, 1.6-dia. 14 Three, 0.8-dia. holes 2.54 5 6 7 − ＋ R Nine, 1.0-dia. holes 13 12 10 9 8 7.62 Note:Check carefully the coil polarity of the Relay. 15.24 8.9 3 0.2 (Coil terminal) 0.18 9-0.6 2.54 3-0.4 7.62 15.24 7.62 Note. Each value has a tolerance of ±0.3 mm. G6ZK-1P-A PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Twelve, 1.8-dia. G 6 Z Orientation mark 1 3 4 Twelve, 1.0-dia. holes. − ＋ S 7.62 20 14 8.6 5 6 7 − ＋ R 13 12 10 9 8 2.54 7.62 Note:Check carefully the coil polarity of the Relay. 15.24 8.9 3 2.54 12-0.6 7.62 15.24 0.2 (Coil terminal) 0.18 7.62 Note. Each value has a tolerance of ±0.3 mm. ●Models with Surface-mounting Terminals G6Z-1FE G6ZU-1FE Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) G6Z-1FE Orientation mark 14 15.24 7.62 2.54 0.8 0.8 0.8 2.3 13 12 11 10 9 8 − ＋ 7 1 8.6 20 G6ZU-1FE 0.2 (Coil terminal) 9.3 6-0.6 2.54 8.3 6-1.1 0.18 9.6 15.24 1 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. 13 12 11 10 9 8 S − ＋ R ＋ − 3-0.4 7.62 8 Orientation mark 14 7 Note:Check carefully the coil polarity of the Relay. G6Z Surface-mounting High-frequency Relay G6Z-1FE-A G6ZU-1FE-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) G6Z-1FE-A Orientation mark 14 15.24 7.62 13 12 11 10 9 8 2.3 2.54 − ＋ 8.3 7 1 8.6 20 9-0.6 2.54 G6ZU-1FE-A 9-1.1 0.2 (Coil terminal) 9.3 Orientation mark 14 0.18 9.6 13 12 11 10 9 8 S − ＋ R ＋ − 7.62 15.24 7 1 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. G6Z-1F G6ZU-1F Note:Check carefully the coil polarity of the Relay. Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) G 6 Z G6Z-1F Orientation mark 14 15.24 2.54 0.8 0.8 13 12 10 9 8 2.3 − ＋ 8.3 1 3 4 5 7 8.6 20 8-1.1 0.2 (Coil terminal) 9.3 8-0.6 2.54 G6ZU-1F 0.8 7.62 Orientation mark 14 0.18 9.6 13 12 10 9 8 S − ＋ R ＋ − 3-0.4 7.62 1 15.24 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. G6Z-1F-A G6ZU-1F-A 3 4 5 7 Note:Check carefully the coil polarity of the Relay. Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) G6Z-1F-A Orientation mark 14 15.24 2.3 2.54 13 12 10 9 8 − ＋ 8.3 1 11-1.1 7.62 0.2 (Coil terminal) 9.3 11-0.6 2.54 3 4 5 7 8.6 20 0.18 G6ZU-1F-A Orientation mark 14 9.6 1 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. 10 9 8 S − ＋ R ＋ − 7.62 15.24 13 12 3 4 5 7 Note:Check carefully the coil polarity of the Relay. 9 G6Z Surface-mounting High-frequency Relay G6ZK-1FE Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Orientation mark 14 15.24 7.62 13 12 11 10 9 8 2.54 0.8 0.8 0.8 2.3 1 8.6 20 8.3 0.2 (Coil terminal) 9.3 7-0.6 2.54 0.18 6 7 Note:Check carefully the coil polarity of the Relay. 7-1.1 9.6 3-0.4 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. 7.62 15.24 G6ZK-1FE-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm 7.62 13 12 11 10 9 8 2.3 2.54 8.6 20 Terminal Arrangement/Internal Connections (Top View) Orientation mark 14 15.24 G 6 Z − ＋ S− ＋ R 8.3 1 − ＋ S− ＋ R 6 7 Note:Check carefully the coil polarity of the Relay. 0.2 (Coil terminal) 9.3 10-0.6 2.54 7.62 0.18 10-1.1 9.6 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. 15.24 G6ZK-1F Mounting Dimensions (Top View) Tolerance: ±0.1 mm Orientation mark 14 15.24 7.62 2.54 0.8 0.8 13 12 − ＋ S 2.3 1 8.6 20 Terminal Arrangement/Internal Connections (Top View) 3 4 10 9 8 − ＋ R 5 6 7 8.3 Note:Check carefully the coil polarity of the Relay. 0.2 (Coil terminal) 9.3 9-0.6 2.54 3-0.4 7.62 15.24 0.18 9-1.1 0.8 9.6 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. G6ZK-1F-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Orientation mark 14 15.24 7.62 2.54 8.6 20 12-0.6 2.54 7.62 15.24 10 2.3 13 12 − ＋ S 8.3 1 3 4 10 9 8 − ＋ R 5 6 7 Note:Check carefully the coil polarity of the Relay. 0.2 (Coil terminal) 9.3 Terminal Arrangement/Internal Connections (Top View) 0.18 12-1.1 9.6 Note 1. Each value has a tolerance of ±0.3 mm. Note 2. The coplanarity of the terminals is 0.1 mm max. G6Z Surface-mounting High-frequency Relay ■Tube Packing and Tape Packing (1) Tube Packing 2. Reel Dimensions 33.5±1 • Relays in tube packing are arranged so that the orientation mark of each Relay in on the left side. Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB. Stopper (gray) 37.5±1 13±0.2 dia. 21±0.8 dia 2±0.5 A Operation of Relays Stopper (green) 330 80 R1 Enlarged view of A Tube length: 530 mm (stopper not included) No. of Relays per tube: 25 pcs (2) Tape Packing (Surface-mounting Terminal Models) • When ordering Relays in tape packing, add the prefix “-TR” to the model number, otherwise the Relays in tube packing will be provided. Relays per Reel: 300 pcs Minimum packing unit: 1 Reel (300 pcs) 1. Direction of Relay Insertion 3. Carrier Tape Dimensions 2±0.1 16±0.1 4±0.1 10±0.1 1.5+0.1 0 dia. 0.5±0.05 14.2±0.1 28.4±0.1 32±0.3 Pulling direction 10.2±0.1 Orientation mark 1.75±0.1 5°MAX A 1.5+0.1 0 4±0.1 0.2 22.6±0.1 20.6±0.1 5°MAX G 6 Z 1.7+0.15 0 Top tape (cover tape) R0.75 Enlarged view of A Pulling direction Note. The radius of the unmarked corner is 0.3 mm. Carrier tape Emboss tape ■Recommended Soldering Method ●Temperature Conditions for IRS Method Temperature • When using reflow soldering, ensure that the Relay terminals and the top of the case stay below the following curve. Check that these conditions are actually satisfied before soldering the terminals. • The thickness of cream solder to be applied should be between 150 and 200 μm on OMRON’s recommended PCB pattern. Correct Soldering Incorrect Soldering Relay T4 Terminal T3 Land Heel fillet is formed PCB T2 Solder T1 Insufficient amount of solder Excessive amount of solder Check the soldering in the actual mounting conditions before use. t2 Soldering Time t1 Preheating Measured part Terminals Top of case Preheating (T1→T2, t1) 150→180°C, 120 s max. − Soldering (T3, t2) 230°C min, 30 s max. − Maximum peak (T4) 250°C max. 255°C max. • Do not quench the terminals after mounting. Clean the Relay using alcohol or water no hotter than 40°C max. 11 G6Z Surface-mounting High-frequency Relay ■Precautions ●For general precautions on PCB Relays, refer to the precautions provided in General Information of the Relay Product Data Book. Substrate Types Correct Use ● High-frequency Characteristics Measurement Method and Measurement Substrate • High-frequency characteristics for the G6Z are measured in the way shown below. Consult your OMRON representative for details on 50-Ω models. Measurement Method for 75-Ω Models G6Z Network vector analyzer (Agilent Technologies) 75-Ω terminating resistance HP8753D 50-Ω/75-Ω adapter (Agilent Technologies) 11852B-004 (Unit: mm) G 6 Z 4-dia. through-hole 0.4 1.4 3.59 40 30 1 6.3 0.95 0.6-dia. through-hole SMD-type Substrate (75-Ω Models, E-shape or Y-shape) 40 30 Note 1. The compensation substrate is used when measuring the Relay’s insertion loss. The insertion loss is obtained by subtracting the measured value for the compensation substrate from the measured value with the Relay mounted to the high-frequency measurement substrate. Note 2. For convenience, the diagrams of the high-frequency measurement substrates given here apply both to models with an E-shape terminal structure and to models with a Y-shape terminal structure. Note 3. Be sure to mount a standoff tightly to the through-hole substrate. Note 4. Use measuring devices, connectors, and substrates that are appropriate for 50Ω and 75Ω respectively. Note 5. Ensure that there is no pattern under the Relay. Otherwise, the impedance may be adversely affected and the Relay may not be able to attain its full characteristics. ●Handling Through-hole Substrate (75-Ω Models, E-shape or Y-shape) 40 30 Material: FR-4 glass epoxy (glass cloth impregnated with epoxy resin and copper laminated to its outer surface) Thickness: 1.6 mm Thickness of copper plating: 18 μm 4-dia. through-hole • Do not use the Relay if it has been dropped. Dropping the Relay may adversely affect its functionality. • Protect the Relay from direct sunlight and keep the Relay under normal temperature, humidity, and pressure. • Use the Relay as soon as possible after opening the moistureproof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. • When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40°C. Do not put the relay in a cold cleaning bath immediately after soldering. ●Claw Securing Force During Automatic Mounting • During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay’s characteristics will be maintained. 1.4 (Unit: mm) C 0.4 A 0.6-dia. through-hole 40 30 0.95 1 Substrate for High-frequency Characteristic Compensation (75-Ω Models, E-shape or Y-shape) 30.7 20 (Unit: mm) 4-dia. through-hole 0.6-dia. through-hole 0.95 40 30 1 Direction A: 4.90 N max. Direction B: 4.90 N max. Direction C: 4.90 N max. Secure the claws to the shaded area. Do not attach them to the center area or to only part of the Relay. 3.91 6.3 B ●Latching Relay Mounting • Make sure that the vibration or shock that is generated from other devices, such as Relays, on the same panel or substrate and imposed on the Latching Relay does not exceed the rated value, otherwise the set/reset status of the Latching Relay may be changed. The Latching Relay is reset before shipping. If excessive vibration or shock is imposed, however, the Latching Relay may be set accidentally. Be sure to apply a reset signal before use. ●Coating • Do not use silicone coating to coat the Relay when it is mounted to the PCB. Do not wash the PCB after the Relay is mounted using detergent containing silicone. Otherwise, the detergent may remain on the surface of the Relay. ●Repeatability • Contact your OMRON representative if the Relay will be used in an application that requires high repeatability in high-frequencycharacteristics for the microload region. (Such applications include testing and measurement equipment and ATE applications.) 12 G6Z Surface-mounting High-frequency Relay G 6 Z • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K124-E1-04 0214(0207)(O) 13