G7J4ATDC6

Power Relay G7J CSM_G7J_DS_E_6_2 A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor • Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. • No contact chattering for momentary voltage drops up to 50% of rated voltage. • Withstanding more than 4 kV between contacts that are different in polarity and between the coil and contacts. • Flame-resistant materials (UL94V-0-qualifying) used for all insulation material. • Standard models approved by UL and CSA. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions for All Relays. Model Number Structure ■ Model Number Legend G7J - 1 2 3 1. Contact Form 4A: 4PST-NO 3A1B: 3PST-NO/SPST-NC 2A2B: DPST-NO/DPST-NC 2. Terminal Shape P: PCB terminals B: Screw terminals T: Quick-connect terminals (#250 terminal) 3. Contact Structure Z: Bifurcated contact None: Single contact Note: For bifurcated contact type, output is 1NO (4PST-NO) or 1NC (3PST-NO/SPST-NC). Ordering Information When your order, specify the rated voltage. ■ List of Models Mounting type PCB mounting W-bracket (see note) Contact form PCB terminals Screw terminals Quick-connect terminals 4PST-NO G7J-4A-P, G7J-4A-PZ --- --- 3PST-NO/SPST-NC G7J-3A1B-P, G7J-3A1B-PZ --- --- DPST-NO/DPST-NC G7J-2A2B-P --- --- 4PST-NO --- G7J-4A-B G7J-4A-T, G7J-4A-TZ 3PST-NO/SPST-NC --- G7J-3A1B-B, G7J-3A1B-BZ G7J-3A1B-T, G7J-3A1B-TZ DPST-NO/DPST-NC --- G7J-2A2B-B G7J-2A2B-T Note: These Relays need a W-bracket (sold separately) for mounting. When ordering specify the voltage. Example: G7J-4A-P 240 VAC Rated coil voltage 1 G7J PCB Terminals Contact form 4PST-NO Screw Terminals (Bifurcated Contact) Model G7J-4A-P Rated voltage 24, 50, 100/120, 200/240 VAC Contact form 3PST-NO/ SPST-NC Model G7J-3A1B-BZ Rated voltage 200/240 VAC 12, 24 VDC 12, 24, 48, 100 VDC 3PST-NO/ SPST-NC G7J-3A1B-P 24, 50, 100/120, 200/240 VAC DPST-NO/DPSTNC G7J-2A2B-P 24, 50, 100/120, 200/240 VAC 12, 24, 48, 100 VDC W-bracket Tab Terminals Contact form Model G7J-4A-T 24, 50, 100/120, 200/240 VAC 3PST-NO/ SPST-NC G7J-3A1B-T 24, 50, 100/120, 200/240 VAC DPST-NO/ DPST-NC G7J-2A2B-T 24, 50, 100/120, 200/240 VAC 12, 24, 48, 100 VDC PCB Terminals (Bifurcated Contact) Rated voltage 4PST-NO 12, 24, 48, 100 VDC 12, 24, 48, 100 VDC Contact form Model Rated voltage 4PST-NO G7J-4A-PZ 200/240 VAC 3PST-NO/ SPST-NC G7J-3A1B-PZ 200/240 VAC 24 VDC 12, 24, 48, 100 VDC 12, 24 VDC W-bracket Screw Terminals W-bracket Tab Terminals (Bifurcated Contact) Contact form Contact form 4PST-NO Model G7J-4A-B Rated voltage 24, 50, 100/120, 200/240 VAC 12, 24, 48, 100 VDC 3PST-NO/ SPST-NC G7J-3A1B-B 24, 50, 100/120, 200/240 VAC DPST-NO/ DPST-NC G7J-2A2B-B 24, 50, 100/120, 200/240 VAC 4PST-NO Model G7J-4A-TZ Rated voltage 200/240 VAC Consult your OMRON representative for details on models not mentioned in this document. 12, 24, 48, 100 VDC 12, 24, 48, 100 VDC ■ Accessories (Order Separately) Name W-bracket Model R99-04 for G5F Applicable Relay G7J-4A-B G7J-3A1B-B(Z) G7J-2A2B-B G7J-4A-T(Z) G7J-3A1B-T G7J-2A2B-T Application Examples • Compressors for air conditioners and heater switching controllers. • Switching controllers for power tools or motors. • Lamp controls, motor drivers, and power supply switching controllers in copy machines, facsimile machines, and other office equipment. • Power controllers for packers or food processing equipment. • Power controllers for inverters. 2 G7J Specifications ■ Coil Ratings Rated voltage AC DC Rated current Coil resistance 24 VAC 75 mA --- 50 VAC 36 mA --- 100 to 120 VAC 18 to 21.6 mA --- 200 to 240 VDC 9 to 10.8 mA --- 12 VDC 167 mA 72 Ω 24 VDC 83 mA 288 Ω 48 VDC 42 mA 1,150 Ω 100 VDC 20 mA 5,000 Ω Must-operate voltage Must-release voltage Max. voltage 75% max. of rated 15% min. of rated 110% of rated voltage voltage voltage 10% min. of rated voltage Power consumption Approx. 1.8 to 2.6 VA Approx. 2.0 W Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and ±15% for DC coil resistance. (The values given for AC rated current apply at 50 Hz or 60 Hz.) 2. Performance characteristic data are measured at a coil temperature of 23°C. 3. The maximum voltage is one that is applicable to the Relay coil at 23°C. ■ Contact Ratings Item Resistive load (cos φ = 1) Inductive load (cosφ = 0.4) Contact mechanism Double break Contact material Ag alloy Rated load NO: 25 A at 220 VAC (24 A at 230 VAC) NC: 8 A at 220 VAC (7.5 A at 230 VAC) Rated carry current NO: 25 A (1 A) NC: 8 A (1 A) Max. switching voltage 250 VAC Max. switching current NO: 25 A (1 A) NC: 8 A (1 A) Resistive load NO: 25 A at 30 VDC NC: 8 A at 30 VDC 125 VDC Note: The values in parentheses indicate values for a bifurcated contact. ■ Characteristics Contact resistance (see note 2) 100 mΩ max. Operate time (see note 3) 50 ms max. Release time (see note 3) 50 ms max. Max. operating frequency Mechanical: 1,800 operations/hr Electrical: 1,800 operations/hr Insulation resistance (see note 4) 1,000 MΩ min. (at 500 VDC) Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts 4,000 VAC, 50/60 Hz for 1 min between contacts of different polarity 2,000 VAC, 50/60 Hz for 1 min between contacts of same polarity Impulse withstand voltage 10,000 V between coil and contact (with 1.2 x 50 μs impulse wave) Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Malfunction: NO:10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) NC:10 to 26 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Shock resistance Destruction: 1,000 m/s2 Malfunction: NO:100 m/s2 NC:20 m/s2 Endurance Mechanical: 1,000,000 operations min. (at 1,800 operations/hr) Electrical: 100,000 operations min. (at 1,800 operations/hr) (see note 5) Error rate (see note 6) 100 mA at 24 VDC (bifurcated contact: 24 VDC 10 mA) Ambient temperature Operating: –25°C to 60°C (with no icing or condensation) Ambient humidity Operating: 5% to 85% Weight PCB terminal: approx. 140 g Screw terminal: approx. 165 g Quick-connect terminal: approx. 140 g 3 G7J Note: 1. The above values are all initial values. 2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method. 3. The operate and the release times were measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature of 23°C. 4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength. 5. The electrical endurance was measured at an ambient temperature of 23°C. 6. This value was measured at a switching frequency of 60 operations per minute. ■ Approved Standards The G7J satisfies the following international standards. Approval for some international markings and symbols are still pending, however, and information on them will be added when they are approved. UL (File No. E41643) CSA (File No. LR35535) Coil ratings 24 to 265 VAC 6 to 110 VDC Contact ratings NO contact Number of test operations 25 A 277 VAC, Resistive 30,000 25 A 120 VAC, General Use 25 A 277 VAC, General Use 25 A 240 VAC, General Use 100,000 1.5 kW 120 VAC, Tungsten 6,000 1.5 hp 120 VAC 1,000 3 hp 240/265/277 VAC 3-phase 3 hp 240/265/277 VAC 30,000 3-phase 5 hp 240/265/277 VAC 20FLA/120LRA 120 VAC 17FLA/102LRA 277 VAC TV-10 120 VAC NC contact 25,000 25 A 30 VDC, Resistive 30,000 *1 A 277 VAC, General Use 6,000 8 A 277 VAC, Resistive 30,000 8 A 120 VAC, General Use 8 A 277 VAC, General Use 8 A 30 VDC, Resistive *1 A 277 VAC, General Use 6,000 Note: *These ratings are bifurcated contact ratings. Reference UL approval: UL508 for industrial control devices CSA approval: CSA C22.2 No. 14 for industrial control devices VDE (File No. 5381UG) Model Coil ratings Contact ratings NO contact G7J-4A-B(P) (T) G7J-2A2B(P) (T) G7J-3A1B-B(P) (T) 6, 12, 24, 48, 100 VDC 24, 50, 100 to 120, 200 to 240 VAC 25 A 240 VAC cosφ = 0.4 25 A 240 VAC cosφ = 1 25 A 30 VDC L/R ≥ 1 NC contact 8 A 240 VAC cosφ = 0.4 8 A 240 VAC cosφ = 1 8 A 30 VDC L/R ≥ 1 Note: Add the suffix “-KM” to the model number when ordering. Reference VDE approval: EN60255-1-00: 1997 EN60255-23: 1996 4 G7J KEMA (File No. 2001291.02) Model Coil ratings Contact ratings NO contact G7J-4A-B(P) (T) (Z) G7J-2A2B(P) (T) 200 to 240 VAC G7J-3A1B-B(P) (T) (Z) 6, 12, 24, 48, 100 VDC 24, 50, 100 to 120, 200 to 240 VAC Class AC1: 25 A at 220 VAC 11.5 A at 380 to 480 VAC Class AC3: 11.5 A at 220 VAC and 8.5 A at 380 to 480 VAC *Class AC1: 1 A at 220 VAC Note: Add the suffix “-KM” to the model number when ordering. *This rating is the bifurcated contact rating. Reference KEMA approval: EN60947-4-1 for contacts Engineering Data AC resistive load (cosφ = 1) AC inductive load (cosφ = 0.4) (NO contact) AC resistive load (cosφ = 1) AC inductive load (cosφ = 0.4) (NC contact) DC resistive load (NO contact) DC resistive load (NC contact)  Endurance 5,000 Endurance (x103 operations) Switching current (A)  Maximum Switching Power 3,000 1,000 700 220 VAC (NO contact) 500 300 100 220 VAC (NC contact) 70 300 Switching voltage (V) 50 Switching current (A)  Malfunctioning Shock G7J-2A2B Terminals upwards Button downwards A1 downwards A2 downwards Button upwards Unit: m/s2 Number of samples: 5 Measurement conditions: Increase and decrease the specified shock gradually imposed in ±X, ±Y, and ±Z directions three times each with the Relay energized and not energized to check the shock values that cause the Relay to malfunction. Criteria: There must not be any contact separation for 1 ms or greater with a shock of 100 m/s2 imposed when the coil is energized or with a shock of 20 m/s2 when the coil is not energized. Energized Not energized Terminals downwards Shock direction 5 G7J
Ambient Temperature vs. Coil Temperature Rise G7J 100 to 120 VAC G7J-4A 100 to 120 VAC Number of Relays: 5 Must-operate voltage Must-release voltage Number of Relays: 5 Coil temperature rise (°C) Must-operate and reset voltage (%)
Ambient Temperature vs. Must-operate and Must-release Voltage Ambient temperature (°C) Ambient temperature (°C) G7J-4A 24 VDC Number of Relays: 5 Must-operate voltage Must-release voltage Number of Relays: 5 Coil temperature rise (°C) Must-operate and reset voltage (%) G7J 24 VDC Ambient temperature (°C) Ambient temperature (°C) Motor Load Item G7J-4A-P, G7J-3A1B-P, G7J-4A-B, G7J-3A1B-B, G7J-4A-T, G7J-3A1B-T Load 3φ, 220 VAC, 2.7 kW (with a inrush current of 78 A and a breaking current of 13 A) Endurance Electrical: 100,000 operations min. 6 G7J Dimensions Note: All units are in millimeters unless otherwise indicated. Screw Terminals with W-bracket G7J-4A-B, G7J-3A1B-B, G7J-3A1B-BZ, G7J-2A2B-B Ten, M3.5 Mounting Holes 34.5 max. Two, 4.5 dia. or M4 7.6 4.3 35±0.1 64 max. 55.2 43.2 51.5 max. 2 Quick-connect Terminals with W-bracket G7J-4A-T, G7J-4A-TZ, G7J-3A1B-T, G7J-2A2B-T 34.5 max. Mounting Holes Two, 4.5 dia. or M4 64 max. Note: W-bracket is sold separately. 51.5 max. PCB Terminals with PCB Mounting G7J-4A-P, G7J-4A-PZ, G7J-3A1B-P, G7J-3A1B-PZ, G7J-2A2B-P Mounting Dimensions 33.5 max. 20, 1.8+0.1 0 dia. 51 max. 51.5 max. 7 G7J  Terminal Arrangement/Internal Connections G7J-4A-P G7J-4A-B G7J-4A-T G7J-3A1B-P G7J-3A1B-B G7J-3A1B-T G7J-2A2B-P G7J-2A2B-B G7J-2A2B-T 14 13 14 13 14 13 24 23 24 23 24 23 34 33 34 33 32 31 44 43 42 41 42 41 A2 A1 A2 A1 A2 A1 Note: Terminals 43 and 44 of the G7J-4A-P(T) and contacts 41 and 42 of the G7J-3A1B-P(B) are bifurcated contacts. The coil has no polarity.  Accessories (Order Separately) R99-04 W-bracket (for G5F) 35 Two, 4.5 dia. Mounting Holes 24 Two, 4.5 dia. or M4 28 30 9 29 35±0.1 7 44 4.4 8 G7J Safety Precautions Refer to Safety Precautions for All Relays. ■ Correct Use Installation Faston Tabs PCB Terminal-equipped Relays weigh approximately 140 g. Be sure that the PCB is strong enough to support them. We recommend dual-side through-hole PCBs to reduce solder cracking from heat stress. Do not impose excessive external force on the G7J in the horizontal or vertical directions when inserting the G7J to the Faston receptacle or pulling the G7J out from the Faston receptacle. Do not attempt to insert or pull out more than one G7J Unit together. Mount the G7J with its test button facing downwards. The Relay may malfunction due to shock if the test button faces upwards. Be careful not to press the test button by mistake because the contacts will go ON if the test button is pressed. If the normal mounting direction is not used, carbides or powder from contact abrasion that results from load switching will accumulate inside the Relay. If the Relay is used past its endurance in this state, insulation failure between circuits of different polarity or Relay burning may occur. Be sure to use the test button for test purposes only. The test button is used for Relay circuit tests, such as a circuit continuity test. Do not attempt to switch the load with the test button. Do not solder the tab terminals. Terminal #250 terminal (6.35 mm in width) Receptacle AMP170333-1 (170327-1) AMP170334-1 (170328-1) AMP170335-1 (170329-1) Housing AMP172076-1: natural AMP172076-4: yellow AMP172076-5: green AMP172076-6: blue Note: Numbers in parentheses are for air feed use. If a voltage is applied to the coil, the test button will retract in an ON state (i.e., an excited state). Operating Coil Micro Loads Internal Connections of Coils DC coil The G7J is used for switching power loads, such as motor, transformer, solenoid, lamp, and heater loads. Do not use the G7J for switching minute loads, such as signals. Use a Relay with a bifurcated contact construction for switching micro loads, in which case, however, only SPST-NO or SPST-NC output is obtained. A2 Soldering PCB Terminals A2 Be sure to solder the PCB terminals manually only. In the case of automatic soldering, some flux may stick to the test button and the G7J. As a result, the G7J may malfunction. The G7J is not of enclosed construction. Therefore, do not wash the G7J with water or any detergent. Connecting A1 AC coil A1 If a transistor drives the G7J, check the leakage current, and connect a bleeder resistor if necessary. The AC coil is provided with a built-in full-wave rectifier. If a triac, such as an SSR, drives the G7J, the G7J may not release. Use the Power MOS FET Relay in this case. Refer to the following diagram when connecting a wire with a screw terminal to the G7J. 7.6 8.8 7 4.5 M3.5 Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Tighter the terminal screws with torque 0.78 to 1.18 N·m. Loose screws result in disconnection of lead wire, malfunction or fire. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 9 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.10 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.