GT1DA04

Analog I/O Units GT1-AD/DA Analog Input/Output Units Compatible with MULTIPLE I/O TERMINAL • Input block incorporates connectors that can be easily mounted or dismounted. (GT1-AD08MX, GT1-DA04MX) • 8 or 4 inputs. • 4 outputs. • High resolution of 1/6,000. • High conversion speed of 8 ms/8 points or 4 ms/4 points. • DIN track mounting. Connector model Terminal Block Model Ordering Information I/O classification I/O points I/O connections 8 Molex connector 4 Terminal block Analog input Analog output Power supply voltage I/O specification Model 24 VDC 4 to 20 mA, 0 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V GT1-AD08MX Molex connector 4 24 VDC Terminal block General Specifications I/O power supply voltage Current consumption 50 mA max. Internal circuitry power supply GT1-AD08MX: GT1-AD04: GT1-DA04MX: GT1-DA04: 100 mA max. 100 mA max. 100 mA max. 150 mA max. Noise immunity Conforms to IEC 61000-4-4, 2 kV (power line) Vibration resistance 10 to 150 Hz, 1.0-mm double amplitude or 70 m/s2 Shock resistance 200 m/s2 Dielectric strength 500 VAC Mounting method DIN 35 mm-track mounting Mounting strength No damage when 100 N pull load was applied in all directions (10 N min. in the DIN track direction) Terminal strength No damage when 100 N pull load was applied Ambient operating temperature -10°C to 55°C Ambient operating humidity 25% to 85% (with no condensation) -25°C to 65°C Accessories I/O Unit Connecting Cable (40 mm) Power for analog I/O is provided from the internal power supply. Applicable Connector (GT1-AD08MX, GT1-DA04MX) Type Molex connector Solderless terminal Model Item Specifications Voltage input Current input Input type 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V Maximum signal input ± 15V ± 30 mA Input impedance 1MΩ min. Approx. 250 Ω Resolution 0 to 20 mA, 4 to 20 mA 1/6,000 (FS) 25°C Overall accuracy -10°C to 55°C ±0.3% FS ±0.4% FS ±0.6% FS ±0.8% FS Conversion speed 8 ms/8 points, 4 ms/4 points Conversion output data Binary data -10 to 10-V range: F448 to 0BB8 full scale Other signal ranges: 0000 to 1770 full scale Insulation method Transistor or photocoupler insulation between inputs and power lines. Item Specifications 51030-0330 Chain terminal 70058-0004 Corresponding to 24 to 30 AWG 70058-0022 Corresponding to 22 to 24 AWG 57036-5000 Corresponding to 22 to 26 AWG 57037-5000 Corresponding to 24 to 30 AWG Voltage output Current output Output type 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V 4 to 20 mA Output permissible load resistance 5kΩ min. 600 Ω max. Output impedance 0.5Ω max. Resolution 1/6,000 (FS) 25°C Overall accuracy -10°C to 55°C ±0.4% FS Conversion speed 4 ms/4 points DA output data Binary data -10 to 10 V range: F448 to 0BB8 full scale Other signal ranges: 0000 to 1770 full scale Insulation method Transistor or photocoupler insulation between outputs and power lines. Remarks Housing Press-fit tool GT1-DA04 Output Specifications Ambient storage temperature * GT1-DA04MX 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA Input Specifications 20.4 to 26.4 VDC (24 VDC -15%/+10%) * I/O Unit interface GT1-AD04 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V -- ±0.8% FS Analog I/O Units GT1-AD/DA 87 Dimensions (Unit: mm) GT1-AD08MX GT1-DA04MX (Molex Connector Models) 27.6 35 65 12.6 37.4 4 60 110 Note: Accessory cable included. GT1-AD04 GT1-DA04 (Terminal Block Models) 80 60 80 GT1-AD04 35 65 65 12.6 4 Note: Accessory cable included. Wiring Diagrams GT1-AD08MX 0 GT1-AD04 1 2 3 4 5 6 7 Input V + V+ 0 – – 0 G I+ 0 V+ 1 AG – 1 I+ 1 V+ 2 AG – 2 I+ 2 V+ 3 I+ 3 AG – 3 AG 24 VDC internal circuit power supply 24 VDC internal circuit power supply 0V 0V Voltage input 0V Current input 0V Current input Voltage input (Short the V+ and I+ terminals for a current input.) GT1-DA04MX GT1-DA04 0 1 2 3 Output V + V+ 0 – – 0 G I+ 0 V+ 1 NC – 1 External device External device Voltage output Analog I/O Units V+ 2 NC – 2 I+ 2 V+ 3 I+ 3 NC – 3 NC 24 VDC internal circuit power supply 24 VDC internal circuit power supply 88 I+ 1 GT1-AD/DA External device Current output