M165-TG-24D

Indicator (Cylindrical 16-dia.) M16 CSM_M16_DS_E_7_6 Cylindrical 16-dia. Indicator • Same basic design as the A16 Pushbutton Switch. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 10. List of Models Appearance Solder terminals Model Rectangular M16-J Square M16-A Round M16-T Voltagereduction lighting M16-@ Screw-less Clamp M16-@ Button Colors The button colors when the buttons are lit and when they are not lit are shown below. Use these colors as reference only. The actual colors may vary. When not lit When lit R (Red) Y (Yellow) PY (Pure yellow) G (Green) W (White) A (Blue) PW (Pure white) 1 M16 Model Number Structure Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Case, LED, and Socket. For information on combinations, refer to Ordering Information on the following pages. (1) (2) (3) (4) (5) M 1 6 5 - T R - 24D - S (5) Terminal Type Symbol No symbol S Terminal type Solder terminals Screw-less Clamp (1) Degree of Protection (2) Shape of Display (3) Color of Display (4) Light Source Symbol Protection Symbol No symbol IP40 5 IP66 oil-resistant type J A T Shape Rectangular Square Round Symbol R G Y PY W PW A Color Red Green Yellow Pure yellow White Pure white Blue Symbol Type 5D 12D 24D LED Operating voltage 5 ±5% VDC 12 ±5% VAC/VDC 24 ±5% VAC/VDC Rated voltage 5 VDC 12 VAC/VDC 24 VAC/VDC Voltage Reduction Unit (24-V Built-in LED) • Color illuminated models are also available (see page 4). • Order the parts separately. Symbol Type T1 T2 LED Operating voltage 100/110 VAC/VDC 200/220 VAC/VDC Rated voltage 110 VAC/VDC 220 VAC/VDC • Solder terminals are available only with 100-V models. • Screw-less clamp connectors are used for 200-V models. Sets ................................. Select an Operation Unit Set (Operation Unit and Case) and a Socket Unit Set (Lamp and Socket Unit). Display Unit Rectangular, Square, Round Lighted Models Socket Unit Set with Voltage-reduction Lighting Voltage-reduction lighting Lamp Socket Unit Set with Screw-less Clamp Connector Lamp 2 M16 Ordering Information Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Case, Lamp, and Socket. Not all combinations are possible. Ask your OMRON representative for details. M16@-J (Rectangular) Models Solder Terminal Models Appearance IP40 IP66 oil-resistant type M16-J@-5D M165-J@-5D LED without Voltage 12 VAC/VDC Reduction Unit M16-J@-12D M165-J@-12D 24 VAC/VDC M16-J@-24D M165-J@-24D IP40 IP66 oil-resistant type M16-A@-5D M165-A@-5D LED without Voltage 12 VAC/VDC Reduction Unit M16-A@-12D M165-A@-12D 24 VAC/VDC M16-A@-24D M165-A@-24D IP40 IP66 oil-resistant type Degree of protection Lighting Rectangular (M16-J) 5 VDC Display color symbol * R: red Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white * Enter the desired color symbol into @ in the model number. M16@-A (Square) Models Solder Terminal Models Appearance Degree of protection Lighting Square (M16-A) 5 VDC Display color symbol * R: red Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white * Enter the desired color symbol into @ in the model number. M16@-T (Round) Models Solder Terminal Models Appearance Degree of protection Lighting Round (M16-T) 5 VDC M16-T@-5D M165-T@-5D LED without Voltage 12 VAC/VDC Reduction Unit M16-T@-12D M165-T@-12D 24 VAC/VDC M16-T@-24D M165-T@-24D Display color symbol * R: red Y: yellow G: green A: blue W: white PY: pure yellow PW: pure white Note: Neon lamps are not available with models that are ordered as a set. They must be ordered individually if required. * Enter the desired color symbol into @ in the model number. Individual models: Refer to pages 4 to 6. (The Display, Lamp, Case, and Switch can be ordered separately.) ■ Accessories, replacements, and tools: Refer to the A16. ■ Ratings and characteristics: Refer to the A16. ■ Dimensions: Refer to pages 8 to 9. 3 M16 Ordering Information Ordering Individually ..........................Displays, Cases, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual parts. Also, store the parts as spares for maintenance and repairs. Display (Refer to page 6.) Rectangular Square Round Note: Use IP40 Displays in combination with IP40 Cases and use IP66 oil-resistant Displays in combination with IP66 oil-resistant Cases. The Display has a legend plate built in. Case (Refer to page 6.) Note: Display Units, which are combinations of Displays and Cases, are also available. Lighted Models Lamp (Refer to page 6.) LED Socket (Refer to page 6.) Solder Terminals (Without Voltage Reduction Unit) Note: Socket Units, which are combinations of Lamps and Sockets, are also available. • For colored illumination, order the Display, Case, Lamp, and Socket Unit separately. 4 M16 Ordering Information Sets.................................. Sets that combined a Display and Cases are also available. Display Set Appearance Classification IP40 IP66 oil-resistant type Model Rectangular (2-way guard) A16-J@M Square (2-way guard) A16-A@M Round (projecting model) A16-T@M Rectangular (2-way guard) A165-J@M Square (2-way guard) A165-A@M Round (projecting model) A165-T@M Insert one of the following symbols into the box in the model number. Symbol R Y PY A W GY Color Red Yellow Pure yellow Blue White* Green Remarks LED only * Use this pushbutton color if the illumination color of the LED is white or pure white. Socket Unit Sets with LEDs Appearance Classification Solder terminals Model 1 -@ 2 M16-@ Socket Unit Sets with Voltage-reduction Lighting (Solder Terminals) Appearance Classification Model Insert symbols into the boxes with circled numbers. 1 @ Symbol 100/110 VAC/VDC 1 -T1 M16-@ Note: The LED has 24-VAC/VDC circuit built in. Socket Unit Sets with Screw-less Clamp Connectors Appearance Classification No voltage-reduction lighting Display Model 1 -@ 2 -S M16-@ 1 -T1-S Voltage-reduc- 100/110 VAC/VDC M16-@ tion lighting (See note.) 1 -T2-S 200/220 VAC/VDC M16-@ Color R Red Y Yellow A Blue W White G Green Symbol Type 2 @ 5D 12D 24D Operating voltage 5 VDC LED 12 VAC/VDC 24 VAC/VDC Note: 1. The LED built into the 100-V model is 24 VAC/VDC. 2. The LED built into the 200-V model is high-intensity 24 VAC/VDC. 5 M16 Ordering Information Ordering Individually ..........................Displays, Cases, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual parts. Also, store the parts as spares for maintenance and repairs. Display For LED-lighted Models Sealing IP40 Rectangular IP66 oil-resistant type Square Round Rectangular Square Round Appearance Color of Display Red A16L-JR A16L-AR A16L-TR A165L-JR A165L-AR A165L-TR Yellow A16L-JY A16L-AY A16L-TY A165L-JY A165L-AY A165L-TY Pure yellow A16L-JPY A16L-APY A16L-TPY A165L-JPY A165L-APY A165L-TPY Green A16L-JGY A16L-AGY A16L-TGY A165L-JGY A165L-AGY A165L-TGY White A16L-JW A16L-AW A16L-TW A165L-JW A165L-AW A165L-TW Blue A16L-JA A16L-AA A16L-TA A165L-JA A165L-AA A165L-TA Lamp LED Operating voltage Color Red Yellow Green White * Blue Pure white High intensity 5 VDC 12 VAC/VDC 24 VAC/VDC A16-5DSR A16-5DSY A16-5DSG A16-5DSW A16-5DA A16-5DPW A16-12DSR A16-12DSY A16-12DSG A16-12DSW A16-12DA A16-12DPW A16-24DSR A16-24DSY A16-24DSG A16-24DSW A16-24DA A16-24DPW * Use the white LED when the required illumination color is white or pure yellow. Case Appearance Classification IP40 IP66 oil-resistant type Model number Rectangular Square Round Rectangular Square A16-CJM A16-CAM A16-CTM A165-CJM A165-CAM Round A165-CTM Socket Appearance Classification Model number Solder terminals PCB terminals M16-0P Screw-Less Clamp M16-S Solder terminals Solder terminals M16-0 Screw-less Clamp Ordering set combinations: Refer to page 3. Voltagereduction lighting 100 V M16-T1 100 V M16-T1-S 200 V M16-T2-S ■ Accessories, replacements, and tools: Refer to the A16. ■ Ratings and characteristics: Refer to the A16. ■ Dimensions: Refer to pages 8 to 9. 6 M16 Specifications Approved Standard Ratings UL, cUL (File No. E76675) LED: 24 VDC max. Note: Certification has been obtained for the Socket Unit. For detailed information on individual products that have received certification, consult your supplier. Ratings Ambient operating temperature −10°C to 55°C (with no icing or condensation) Ambient operating humidity 35% to 85%RH Ambient storage temperature −25°C to 65°C (with no icing or condensation) Super-bright LED Rated voltage Rated current 5 VDC ±5% 5 VDC 12 VAC/VDC 24 VAC/VDC Operating voltage 8 mA 12 VAC/VDC ±5% 24 VAC/VDC ±5% Built-in limiting resistance Red, yellow, white: 300 Ω Green, blue, pure white: 160 Ω Red, yellow, white: 1 kΩ Green, blue, pure white: 910 Ω 2.4 kΩ Characteristics Screw-less Clamp Item Type Screw-less Clamp Recommended wire size 0.5 mm2 twisted wire or 0.8 mm-dia. solid wire 0.3 mm2 0.5 mm2 0.75 mm2 1.25 mm2 Usable wires Twisted wire Solid wire 0.5 mm dia. 0.8 mm dia. 1.0 mm dia. --and tensile strength Tensile strength 10 N 20 N 30 N 40 N Length of exposed wire 10 ±1 mm Compliant standards JIS C 2811 Terminal Blocks for Industrial Use 7 M16 Dimensions (Refer to the A16 for details of panel cutout dimensions.) Rectangular M16@-J Solder terminals Packing (t0.5) (for IP66 oil-resistant type only) M16×1 (Unit: mm) Square M16@-A Solder terminals Packing (t0.5) (for IP66 oil-resistant type only) M16×1 14.6 dia. 18 dia. 14.6 dia. 18 dia. 4 4 10.8 21.1 28.5 15.1 9.3 4.85 Lamp terminals 10.8 6 6 9.3 18 Lamp terminals 21.1 28.5 4.85 18 15.1 21 24 15.1 Mounting nut Round M16@-T Solder terminals Mounting nut 18 Lock ring Lock ring Packing (t0.5) (for IP66 oil-resistant type only) M16×1 18 dia. 15.1 dia. 14.6 dia. 18 dia. 10.8 4 4 Lamp terminals 10.8 6 9.3 Terminal Hole Dimensions 21.1 28.5 2.6 0.9 18 Lamp terminals 4.85 1.5 2.8 14.6 dia. 18 dia. 18 Mounting nut Lock ring 8 M16 Dimensions (Unit: mm) Rectangular M16@-J@-T1 Voltage-reduction lighting, solder terminals 50.1 42.7 9.5 6 21.1 10.8 4 Direction-indication arrow 0.5 M16×1 Case Packing (t0.5) (for IP66 oil-resistant type only) Panel Cutouts 9.8 18 Operation Unit 16+ 0.2 0 dia. 24 min. Marking face Lock ring Mounting ring Socket 23 min. (22.4) 15.1 18 8.8 16.6 20.6 2.8 21 24 Rectangular M16@-J@-S Screw-less Clamp 2 9.5 6 48.9 10.8 4 24 23.9 Panel Cutouts M16×1 Socket dismounting lever 16+ 0.2 0 dia. 25 min. Lock ring Mounting ring 33 min. (31.7) 27.4 18 15.1 21 24 23.5 Packing (t0.5) (for IP66 oil-resistant type only) 9 M16 Dimensions (All units are in millimeters unless otherwise indicated.) Terminal Arrangement Solder Terminals Screw-less Clamp (BOTTOM VIEW) Black Voltage-reduction Lighting (BOTTOM VIEW) (BOTTOM VIEW) Side with TOP indicated Side with TOP indicated - - L- + + + + + + The L+ is not shown on the Socket Unit. Red Models with voltage-reduction lighting have a circuit to reduce voltage built in. Accessories, Replacements, and Tools The accessories, replacements, and tools are also used with the A16 Pushbutton Switch. Refer to the A16 datasheet. Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A16. Precautions for Correct Use Mounting • When mounting the Case onto the Socket Unit, ensure that the orientation is correct. Perform mounting with the dimple on the Case and the TOP mark on the Socket Unit facing in the same direction. TOP mark dimple Case Screw-less Clamps Mounting Procedure 1. Strip a length of 10 mm off the end of the wire (allowable range: 10±1 mm). 2. Bunch wire strands together and straighten them. 3. Insert the wire into the insertion hole while pressing the release button at the side of the hole. (Using a precision screwdriver is recommended.) 4. Let go of the release button to lock the wire into place. 5. After locking, pull on the wire gently to confirm that it is securely locked. Removing Procedure Socket Unit Wiring • When using stranded wire, gather the ends of the strands together before wiring. • When wiring, insert the wire until it comes into contact with something. After wiring is completed, pull on the wires to confirm that they are connected securely. • After wiring, ensure that continuous pressure is not applied to the terminals. • Refer to internal connections diagrams and confirm the terminal numbers before performing wiring. 1. Remove wires by pulling them while pressing the release button. Note: When reusing wires that have already been locked, cut off the end of the wire and strip the wire again before using. 10 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2021.4 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2021 All Right Reserved.