MGN1A-DC12

Heavy Duty Power Relay MGN 30 Amp Heavy Duty Relay • Class F coil insulation system for 155°C (311°F) ® • Coil molded in DuPont Rynite for environmental protection • Rugged construction rivets terminals to base • CULUS Listed • Short Circuit Current Rating (SCCR) of 5kA, 600VAC Ordering Information To Order: Select part number and add the desired coil voltage rating (e.g. MGN1C-AC24) Base size Contact Form Model Shor t SPDT MGN1C Long MG series dust cover SPST-NO MGN1A SPST-NO-DM MGN1X DPST-NO DPDT MGN2A MGN2C DPDT (see note) MGN2CM (see note) MGCOV Note 1: MGN2CM is magnetic blow-out type. Available in following coil voltages: AC: 120, 240 DC: 12, 24, 48 Note 2: MGN1X is available in following coil voltages: AC: 12, 24, 120 DC: 12, 24 Specifications Contact Data Materials All versions 5/16” diameter Ag-Alloy Contact UL ratings 30 amp or 1-1/2 hp @ 120 or 240 VAC, 2 hp @ 240 VAC, 3,600w @ 120 or 240 VAC (ballast), 30 amp @ 240 VAC, 100,000 cycle (resistive), 20 amp @ 600 VAC, 30 amp @ 28 VDC E323870 UL file number Note: Magnetic Blow-out versions also have a 20 amp @ 125 VDC (resistive) load rating. Heavy Duty Power Relay MGN 325 Coil Data AC Nominal voltage 6 VAC * Resistance in Ohms ± 10% Nominal coil power Coil voltages Coil treatment Insulation resistance Pick up voltage at 25 C (77 F) 0.85 9.5 VA Up to 600 volts/60 Hz Molded Rynite® 100 megohms min. Std. Class F 85% or less of nominal Resistance in Ohms ± 10% Nominal coil power Coil voltages Coil treatment Insulation resistance Pick up voltage at 25 C (77 F) 18 2W Up to 125 volts Molded Rynite® 100 megohms min. Std. Class F 12 VAC* 2.85 120 VAC 295 24 VAC 11.5 240 VAC 1,170 4,860 480 VAC* DC Nominal voltage 6 VDC* 12 VDC 72 48 VDC* 1,150 24 VDC 75% or less of nominal 290 110 VDC* 6,050 Note: All rated coil voltages denoted by * will be manufactured upon special request. Please consult with an Omron Representative for more details. Characteristics Operate time Approximately 30 ms Release time Approximately 30 ms Operating ambient temperature AC: Coil temperature rise 25 C ambient-continuous duty Life expectancy AC: Electrical at rated load Dielectric strength Mechanical Terminals DC: -45 to 80 C (-49 to 176 F) @ 30 amps -45 to 115 C (-49 to 239 F) @ 30 amps 70 C (158 F) approx. @ 60 Hz (use at 50 Hz will cause slight increase in coil rise) 35 C (95 F) approx. 100,000 operations (minimum) 1,000,000 operations 2,200 VRMS, 60 Hz between contacts 2,200 VRMS, 60 Hz between other elements Screw type Weight 326 DC: Short base version: approx 227 g (8 oz) Long base version: approx 283 g (10 oz) Heavy Duty Power Relay MGN Dimensions Unit: mm (inch) 7.93 (0.312) recess (See note) ■ MGN (Long Base) 7.93 (0.312) recess (See note) 4.78 (0.188) dia., 2 holes 7 5 3 5 4.78 (0.188) dia., 2 holes 3 ■ MGN (Short Base) 47.63 (1.875) 47.63 (1.875) 63.50 (2.50) 20.03 (0.789) 42.04 (1.655) 63.50 (2.50) 55.88 (2.20) 3.18 (0.125) (See note) Note: Recess for screw mounting on units with 300--600 VAC coils 4 6 4 6 8 63.50 (2.50) 84.33 (3.32) 60.45 (2.38) Blow-Out Magnet 3.18 (0.125) (See note) Note: Recess for screw mounting on units with 300--600 VAC coils ■ MG Series Dust Cover (Optional) Sealed knock-out holes for standard conduit fittings. Relay mounts on pre-drilled base. Constructed of Aluminum. Snap-action cover release. 127W x 76.2H x 101.6D mm (5W x 3H x 4D in) ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Heavy Duty Power Relay MGN 327 MEMO 328 Heavy Duty Power Relay MGN Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed he individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limita ions of use that apply to the products. This information by itself is not sufficient for a complete determination of he suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Controllers & I/O • Machine Automation Controllers (MAC) • Motion Controllers • Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O Authorized Distributor: Robotics • Industrial Robots • Mobile Robots Operator Interfaces • Human Machine Interface (HMI) Motion & Drives • Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems • Frequency Inverters Vision, Measurement & Identification • Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems Sensing • Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors • Rotary Encoders • Ultrasonic Sensors Safety • Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems • Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices • Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays Control Components • Power Supplies • Timers • Counters • Programmable Relays • Digital Panel Meters • Monitoring Products Switches & Relays • Limit Switches • Pushbutton Switches • Electromechanical Relays • Solid State Relays Software • Programming & Configuration • Runtime J33I-E-03 03/17 Note: Specifications are subject to change. © 2017 Omron. All Rights Reserved. Printed on recycled paper. Printed in U.S.A.