Programmable Terminals
NS Series
Even Simpler Equipment Operation with Outstanding Synergy.
5.7 inches
Color TFT
10.4 inches
Color TFT
15 inches
Color TFT
12.1 inches
Color TFT
8.4 inches
Color TFT
STN monochrome
Features
• 5.7 to 12.1 inch sizes are available.
• A hand-held version of the NS5 is now available to perform operations at the production site. The NS-series PT's
have a complete set of functions that can be used at the production site.
• The Smart Active Parts(SAP Library) makes it easy to connect to OMRON PLCs and components,
OMRON provides a development environment that requires with no programming and no screen designing.
• When an error occurs in a Unit in the OMRON PLCs, the Troubleshooter SAP Library provides an easy-tounderstand explanation of the cause of the error as well as the countermeasures.
• Ladder Monitor come as a Standard Feature. The ladder program can be monitored onsite without a laptop!
Ladder monitor lets you monitor PLC program status, search for addresses or instructions, monitor multiple I/O
points, and much more.
• Provides the FA integrated tool package "CX-One" for a Screen Design Software Integrated Simulation come as a
Standard Feature. The integrated simulation function simulates ladder programs and screen data simultaneously
even without the actual hardware.
• Screens support 42 languages and the Support Software supports eight. System messages can be displayed in
eight languages.
• Single Port Multi Access (SPMA) come as a Standard Feature. The ladder program and screen data can be
transferred from a single port!
• Connectable PLCs and devices appear one after another.
Has become connectable with the PLCs of Mitsubishi Electric Corporation and the Inverters of OMRON
Corporation.
Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
Windows is registered trademarks of Microsoft Corporation in the USA and other countries.
EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
1
NS Series
Network
Provides serial NT Link communications supporting both 1:1 and 1:N connections. The NT Link has more efficient communications than Host Link
and its capabilities are especially apparent in applications with multiple PTs connect to the PLC. The NS-series PTs can also support
communications with multiple PLCs and multiple NS-series PTs through Controller Link and Ethernet connections, so the network can be
configured freely to match the requirements and scale of the application. In addition, using the NS-Runtime makes it possible to monitor machine
status and log data from the host.
Software for Machine Monitoring and
Data Logging
[Example NS-series Network
Configuration]
1
EtherNet/IP (Tag access)
4
(sold separately)
Personal computer
EtherNet/IP, Ethernet
CS/CJ-series
PLC
3
Controller Link
NS-series PT
2 Serial connection
5 Connections
across network
levels
NS-series PT
CS/CJ-series PLC
NS-series PT
NS-series PT
2 Serial
CS/CJ-series
PLC
CS/CJ-series
PLC
connection
Configuration of CJ2 series, NJ series and NX series
1 EtherNet/IP Connection (Tag accesses)
If an Ethernet-compatible NS-series PT is used, the PT can connect to a Controller with built-in EtherNet/IP and an Option Unit is not needed to
connect at the PT.
NS-series PT
Personal computer
Controller
2
Controller
NS-series PT
Controller
NS Series
Configuration of CS series, CJ series and CP series
2 Serial connection
1:1 NT Link or Host Link
NS:PLC = 1:1
NS:PLC = 1:2
Connecting with the PLC through port A or port B
NS-series PT
NS-series PT
PLC
PLC
PLC
1:N NT Link
NS:PLC ratio = 8:1 max. Up to 8 NS-series PTs can be connected to each of the PLC's RS-232C/RS-422A ports.
NS-series
PT
NS-series
PT
NS-series
PT
PLC
NS-AL002 Converter
(Converts between
RS-232C and RS-422A.)
3 Controller Link Connection
The PT can be connected to an OMRON Controller Link network by mounting a Controller Link Interface Unit.
NS-CLK21
NS Series
PT
If a Controller Link connection
is used, data links can be set
between PLCs and multiple
PLCs can be monitored/set
from the NS-series PT's screen.
PLC
PLC
PLC
Baud rate
2 Mbps (500 m max.)
1 Mbps (800 m max.)
500 kbps (1 km max.)
Max. number of nodes: 32 nodes
4 EtherNet/IP or Ethernet Connection
If an Ethernet-compatible NS-series PT is used, the PT can connect to a PLC with an Ethernet Unit and an Option Unit is not needed to connect at the PT.
NS Series PT
Personal computer
PLC
PLC
NS Series PT
PLC
5 Connections Over Network Levels
The NS-series PTs can connect to a variety of devices in the network, through as many as 3 network levels.
For example, if SAP (Smart Active Parts) are being used, an NS-series PT connected by Ethernet can be used to monitor the information in a PLC
connected through Controller Link as well as the information in the DeviceNet Slaves connected to that PLC.
NS Series
PT
NS Series
PT
Ethernet
PLC
Seamless and
Program-less
Seamless and
Program-less
Controller Link
PLC
PLC
DeviceNet
3
NS Series
System Configuration
NS5/NS8/NS10/NS12/NS15
OMRON
Memory Card
Memory Card
Interface
Ethernet
port
USB
Slave
RS-422A Conversion Unit
CJ1W-CIF11
NS-AL002
Note: A Conversion Unit is not required to connect to the RS-422A/485 serial
interface of the NS15.
USB RS-232C RS-232C
Master
port
port
OMRON PLC
PT-to-PLC Connecting Cable
XW2Z-200T (Length: 2 m)
XW2Z-500T (Length: 5 m)
RS-232C
Bar Code Reader
Recommended: OMRON
V520-RH21-6 *1
Screen transfer cable
XW2Z-S002 (Length: 2 m)
Screen transfer cable
XW2Z-S002 (Length: 2 m)
RS-232C
USB Serial Conversion Cable
CS1W-CIF31
USB
Personal computer
Memory link connection
Micro-computer board,
personal computer, etc.
CompoWay/F connection
Temperature
Controller
Modbus (MEMOBUS)-RTU connection
RS-422A
OMRON
PLC
Inverter
Standard USB cable
Commercially available.
Standard USB cable
Commercially available.
Standard USB cable
Commercially available.
USB
PictBridge
PictBridge-compatible printer
USB
Personal computer
Wireless
WE70 *2
WE70 *2
Ethernet
OMRON
PLC
Ethernet
OMRON
PLC
EtherNet / IP
OMRON
Controller
Ethernet
Personal computer
*1. Bar Code Reader (V520-RH21-6) was discontinued at the end of August 2016.
*2. Wireless (WE70) is final order entry date at the end of June 2020.
4
NS Series
Expansion Bus Interface
Any one of the following Units can be mounted to
the expansion bus interface.
Controller Link Interface Unit
NS-CLK21
Video Input Unit
NS-CA001
RGB/Video Input Unit
NS-CA002
Expansion bus
interface
Controller Link
PLC
NTSC/PAL
Vision
Sensor
NTSC/PAL
RGB output
Note: Video Input Units and RGB Video Input Units cannot be used with some models.
Personal computer
Multi-vendor
Computer Link Unit
Mitsubishi A-series PLC
Function Extension Board or Mitsubishi
FX-series PLC Communications Adapter
Mitsubishi FX-series PLC
Serial Communications Unit
Mitsubishi QnA-series PLC
Serial Communications Unit
RS-232C
port
RS-232C
port
Mitsubishi Q-series PLC
RS-232C
Computer Link Module
Yokogawa’s FA-M3(R) Series
SIMATIC S7 HMI Adapter
Siemens S7-300-series PLC
RS-422A
Conversion Unit
CJ1W-CIF11
NS-AL002
Note: A Conversion Unit
is not required to
connect to the
RS-422A/485
serial interface of
the NS15.
RS-422A/485 (See note.)
Serial Communications Module
Screen transfer cable
XW2Z-S002 (Length: 2 m)
Yaskawa MP-series PLC
Rockwell (Allen-Bradley)
SLC500/Micrologix/ControlLogix/
CompactLogix/PLC-5-series PLC
Modbus device (RTU mode)
Computer Link Unit
Mitsubishi A-series PLC
Function Extension Board or Mitsubishi
FX-series PLC Communications Adapter
Mitsubishi FX-series PLC
Serial Communications Unit
Mitsubishi QnA-series PLC
Serial Communications Unit
Mitsubishi Q-series PLC
Computer Link Module
Yokogawa’s FA-M3(R) Series
Serial Communications Module
Yaskawa MP-series PLC
Rockwell (Allen-Bradley)
PLC-5-series PLC
Modbus device (RTU mode)
Note: Whether an RS-422A or RS-485 connection is supported depends on the device that you are connecting to.
For details, refer to the Connectable Devices page or NS-Series Programmable Terminals HOST CONNECTION MANUAL Multivendor
Connection (Cat.V092).
5
NS Series
NSH5 Hand-held PT
USB
Commercially available USB cable.
USB Slave
Memory
Card interface
OMRON
Memory Card
NSH5 PT
RS-232C
cable
RS-422A
cable
RS-232C
cable
UL-listed Cables
RS-422A
cable
RS-232C Connecting Cable for the NSH5
NSH5-232CW-3M (Length: 3 m)
RS-232C
PLC
RS-422A
PLC
RS-232C
PLC
RS-232C Connecting Cable for the NSH5
NSH5-232CW-10M (Length: 10 m)
RS-422A Connecting Cable for the NSH5
NSH5-422CW-10M (Length: 10 m)
RS-232C Connecting Cable for the NSH5
NSH5-232UL-3M (Length: 3 m)
RS-232C Connecting Cable for the NSH5
NSH5-232UL-10M (Length: 10 m)
RS-422A Connecting Cable for the NSH5
NSH5-422UL-10M (Length: 10 m)
PLC
RS-422A
USB
Commercially available USB cable.
USB Slave
Personal computer
Memory
Card interface
OMRON
Memory Card
NSH5 PT
Personal computer
Removable Box Connected
RS-232C
cable
Removable Box
RS-232C Connecting Cable for the NSH5
NSH5-232CN-3M (Length: 3 m)
RS-422A
PLC
RS-232C Connecting Cable for the NSH5
NSH5-232CN-10M (Length: 10 m)
System Configuration
Up to eight NSH5s can be
connected at a time.
(Removable Box Connected)
NSH5 (See note.)
PLC
RS-232C connection
(Cable length: 3 or 10 m)
Removable
Box
Control panel
RS-422A connection (Total cable length: 500 m max.)
Up to 15 Removable Boxes
can be connected.
Note: Before removing the NSH5 from the Removable Box,
be sure to first turn OFF the power supply key on the Removable Box.
6
NS Series
Ordering Information
International Standards
• The standards are availabled as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus
(Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.
Programmable Terminals
Product name
Specifications
Effective display area
Number of dots
Ethernet
Ivory
No
5.7-inch *2
TFT color
LED backlight
Yes
320 × 240 dots
NS5-V2 *1
5.7-inch *2
High-luminance
TFT color
LED backlight
8.4-inch *2
TFT
LED backlight
NS8-V2
10.4-inch *2
TFT
LED backlight
NS10-V2
12.1-inch *2
TFT
LED backlight
NS12-V2
15-inch
TFT
NS15-V2
NSH5-V2 *1
Hand-held
5.7-inch
TFT
No
Yes
No
640 × 480 dots
Yes
No
640 × 480 dots
Yes
No
800 × 600 dots
Yes
1,024 × 768 dots
320 × 240 dots
Yes
No
Model
Case color
Standards
NS5-SQ10-V2
Black
NS5-SQ10B-V2
Ivory
NS5-SQ11-V2
Black
NS5-SQ11B-V2
Ivory
NS5-TQ10-V2
Black
NS5-TQ10B-V2
Ivory
NS5-TQ11-V2
Black
NS5-TQ11B-V2
Ivory
NS8-TV00-V2
Black
NS8-TV00B-V2
Ivory
NS8-TV01-V2
Black
NS8-TV01B-V2
Ivory
NS10-TV00-V2
Black
NS10-TV00B-V2
Ivory
NS10-TV01-V2
Black
NS10-TV01B-V2
Ivory
NS12-TS00-V2
Black
NS12-TS00B-V2
Ivory
NS12-TS01-V2
Black
NS12-TS01B-V2
Silver
NS15-TX01S-V2
Black
NS15-TX01B-V2
Black (Emergency stop
button: Red)
NSH5-SQR10B-V2
Black
(Stop button: Gray)
NSH5-SQG10B-V2
UC1, CE,
N, L,
UL Type4
UC1, CE,
N, L
UC1, CE,
N, L,
UL Type4
UC, CE
*1. As of July 2008, the image memory has been increased to 60 MB.
*2. Lot No. 15Z0 or later of NS5 color-type models, Lot No. 28X1 or later of NS8 models, Lot No. 11Y1 or later of NS10 models, Lot No. 14Z1 or
later of NS12 models, LotNo.31114K or later of NS15 models.
NS-Runtime
Product name
Specifications
Media
1license
NS-Runtime
NS-Runtime Installer, PDF manual, hardware key (See note.)
3 licenses
10 licenses
Model
Standards
NS-NSRCL1
CD
NS-NSRCL3
---
NS-NSRCL10
Note: A hardware key (USB dongle) is required for NS-Runtime operation.
●System Requirements
Item
Specifications
OS *
Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version)
CPU
Celeron, 1.3 GHz or higher (Recommended)
Memory size
HDD: 50 MB min., RAM: 512 MB min. (Windows 7: 1 GB min.).
50 MB is required for the Runtime alone. (An additional 280 MB is required if CX-Server is not already installed.)
* Ver. 1.30 or later of NS Runtime do not support Windows XP (Service Pack 3 or higher) and Windows Vista.
7
NS Series
Software
●How to Select Required Support Software for Your Controller
The required Support Software depends on the Controller to connect. Please check the following table when purchasing the Support Software.
Item
Omron PLC System
Omron Machine Automation Controller System
Controller
CS, CJ, CP, and other series
NJ-series and NX-series
Programmable Terminals
NS-series
NS-series with an Ethernet port
Software
FA Integrated Tool Package CX-One
Automation Software Sysmac Studio
●FA Integrated Tool Package CX-One
Product name
Specifications
Number of
licenses
Media
1 license *
DVD
Model
Standards
CXONE-AL01D-V4
---
The CX-One is a comprehensive software package that integrates Support
Software for OMRON PLCs and components.
FA Integrated
Tool Package
CX-One Ver.4.@
CX-One runs on the following OS.
Windows XP (Service Pack 3 or higher, 32-bit version) / Windows Vista (32-bit/
64-bit version) / Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit
version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit
version)
CX-One Version 4.@ includes CX-Designer Ver.3.@.
For details, refer to the CX-One catalog (Cat. No. R134)
* Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
●Automation Software Sysmac Studio
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available
individually. Each model of licenses does not include any DVD.
Specifications
Product name
Standards
Media
- (Media only)
Sysmac
Studio
(32-bit)
DVD
SYSMAC-SE200D
---
Sysmac Studio runs on the following OS.
Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) /
- (Media only)
Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version) *1
Sysmac
Studio
(64-bit)
DVD
SYSMAC-SE200D-64
---
SYSMAC-SE201L
---
The Sysmac Studio provides an integrated development environment to set
up, program, debug, and maintain NJ/NX Series CPU Units, NY-series
Industrial PC, Controllers and other Machine Automation Controllers, as
well as EtherCAT slaves.
Sysmac Studio
Standard Edition
Ver.1.@
Model
Number of
licenses
The Sysmac Studio Standard Edition DVD includes Support Software to set
up EtherNet/IP Units, DeviceNet slaves, Serial Communications Units, and
Support Software for creating screens on HMIs (CX-Designer).
Refer to your OMRON website for details.
1 license *2
---
Note: To connect the NJ5 Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is also required.
To connect the NJ1/NJ3 Controller, NS system version 8.61 or higher is required. CX-Designer version 3.4 or higher is also required.
To connect the NX7 Controller, NS system version 8.9 or higher is required. CX-Designer version 3.64 or higher is also required.
To connect the NX1 controller, NS system version 8.96 or higher is required. CX-Designer version 3.70 or higher is also required.
To connect the NX1P controller, NS system version 8.93 or higher is required. CX-Desiner version 3.70 or higher is also required.
*1. Model "SYSMAC-SE200D-64" runs on Windows 10 (64 bit).
*2. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
8
NS Series
Cable
Product name
Cable *1
NSH5 Cables
UL-compliant
NSH5 Cable
PT-to-PLC
Connecting Cable *2
NSH5 Removable Box
Cable
Specifications
Model
Screen transfer cable for DOS/V (CX-Designer ↔ PT)
Length: 2 m
XW2Z-S002
USB-Serial Conversion Cable
Length: 0.5 m
CS1W-CIF31
USB relay cable
Length: 1 m
NS-USBEXT-1M
RS-422A cable (loose wires + D-Sub 9-pin)
Length: 10 m
NSH5-422CW-10M
RS-232C cable (loose wires + D-Sub 9-pin)
Length: 3 m
NSH5-232CW-3M
RS-232C cable (loose wires + D-Sub 9-pin)
Length: 10 m
NSH5-232CW-10M
RS-422A cable (loose wires)
Length: 10 m
NSH5-422UL-10M
RS-232C cable (loose wires + relay cable)
Length: 3 m
NSH5-232UL-3M
RS-232C cable (loose wires + relay cable)
Length: 10 m
NSH5-232UL-10M
PT connection: 9 pins
PLC connection: 9 pins
Length: 2 m
XW2Z-200T
Length: 5 m
XW2Z-500T
PT connection: 9 pins
PLC peripheral port
Length: 2 m
XW2Z-200T-2
RS-232C Cable (connectors)
Length: 5 m
XW2Z-500T-2
Length: 3 m
NSH5-232CN-3M
Length: 10 m
NSH5-232CN-10M
NSH5 Removable Box
---
NSH5-AL001
NSH5 Wall-mounting
Bracket
---
NSH5-ATT02
NSH5 Visor
---
NSH5-ATT01
Standards
--N
---
CU
---
*1. Use a standard USB Type A male to Type B type male Cable to connect the NS series PT to a personal computer (CX-Designer). We
recommend that you use a USB cable with a ferrite core attached to ensure stable communications. (Examples: FH-VUAB from OMRON and
U2C-BF series (US2-BF@@BK) from ELECOM as of February 2016)
Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends on the printer.
*2. To connect the NS series PT to NJ series Controller, using a commercially available 10/100-BASE-TX twisted-pair cable.
For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).
9
NS Series
Options
Product name
Video
Input
Unit
Specifications
Model
Inputs: 4 channels
Signal type: NTSC/PAL
Standards
NS-CA001
UC1, CE
Input channels: 2 video channels and 1 RGB channel *1
Signal type: NTSC/PAL
NS-CA002
For Controller Link Communications
NS-CLK21
Transmission distance: 500 m total length
Note: Use this model when connecting PT models without a V@ suffix.
Note: PT models with the V@ suffix can also be connected.
NS-AL002
Transmission distance: 50 m total length
Note: Only PT models with a suffix of V@ are connectable.
Use the NS-AL002 to connect models without a V@ suffix.
CJ1W-CIF11
Controller Link Interface
Unit
RS-422A
Adapter
Anti-reflection Sheets
(5 surface sheets)
Sheet/Cover *2
Protective Covers (5 pack)
(anti-reflection coating)
Protective Covers
(1 cover included)
(Transparent)
Protective Covers
(5 covers included)
(Transparent)
NS15-KBA04
NS12/10
NS12-KBA04
NS8
NS7-KBA04
NS5
NT30-KBA04
NS12/10
NS12-KBA05
NS8
NS7-KBA05
NS5
NT31C-KBA05
NS15
NS15-KBA05N
NS12/10
NS12-KBA05N
NS8
NS7-KBA05N
NS5
NT31C-KBA05N
NT625C/631/631C Series to NS12/10 Series
NS12-ATT01
NT625C/631/631C Series to NS12/NS10 Series (Black)
NS12-ATT01B
NT610C Series to NS12/10 Series
NS12-ATT02
NT620S/620C/600S Series to NS8 Series
NS8-ATT01
NT600M/600G/610G/612G Series to NS8 Series
NS8-ATT02
128 MB
HMC-EF183
256 MB
HMC-EF283
512 MB
HMC-EF583
Memory Card Adapter
---
HMC-AP001
Replacement Battery
Battery life: 5 years (at 25°C)
CJ1W-BAT01
Bar Code Reader *3
CCD handheld bar code reader (RS-232C interface)
V520-RH21-6
Attachment
Memory
Card
*1. One screen cannot display two video inputs simultaneously.
*2. A Chemical-resistant Cover (NT30-KBA01) is available only for the NS5.
*3. Bar Code Reader (V520-RH21-6) was discontinued at the end of August 2016.
10
NS15
UC1, CE
---
UC1, N,
L, CE
---
CE
---
NS Series
General Specifications
NS5/NS8/NS10/NS12/NS15
Series
Rated power supply
voltage
NS5-V2
NS8-V2
NS10-V2
NS12-V2
NS15-V2
24 VDC
Allowable voltage range 20.4 to 27.6 VDC (24 VDC ±15%)
Power consumption
15 W max.
Ambient operating
temperature
0 to 50 °C (See note on the next page.)
Note: The ambient operating temperature is subject to the following restrictions according to
the mounting angle.
Mounting angle of 0 to 30° to the horizontal:
• When no Expansion Units are mounted, the operating temperature range is 0 to 45°C.
• When a Video Input Unit or a Controller Link Interface Unit is mounted, the ambient
operating temperature is 0 to 35°C.
Mounting angle of 30 to 90° to the horizontal: Operating temperature range of 0 to 50°C
25 W max.
45 W max.
Storage temperature
−20 to 60 °C *1
Ambient operating
humidity
35 to 85% (0 to 40 °C), 35 to 60% (40 to 50 °C) (with no condensation)
Operating environment
No corrosive gases.
Noise immunity
Conforms to IEC61000-4-4, 2 kV (power lines).
90°
5 to 8.4 Hz, 3.5 mm single
amplitude, 8.4 to 150 Hz,
9.8 m/s2 10 min times
each in X, Y, and Z
directions
10 to 57 Hz, 0.075 mm amplitude, 57 to 150 Hz, 9.8 m/s2 30 min each in X, Y, and Z directions
Shock resistance
(during operation)
147 m/s2 3 times each in direction of X, Y, and Z
Weight
1.0 kg max.
Degree of protection
Front operating panel: IP65 oil-proof type and NEMA4 UL type 4. *2
Note: May not be applicable in locations with long-term exposure to oil.
Ground
Ground to 100 Ω or less.
Battery life
5 years (at 25 °C): Replace battery within 5 days after the battery runs low (indicator lights orange).
Applicable standards
Certified for conformance to UL 508, UL 1604, EMC Directive, NK, and LR Standards.
2.3 kg max.
2.5 kg max.
*1. Operate the PT within the temperature and humidity ranges shown in the right diagram.
*2. Support for NS5, NS10, NS12 and NS15.
4.2 kg max.
Operation
Storage
50
Temperature (°C)
0
−20 0
NSH5 Hand-held PT
Series
30°
Horizontal 0°
Vibration resistance
(during operation)
2.0 kg max.
e
ac
urf
ys
pla
Dis
10
20
40
30
Humidity (%RH)
95% 80%
60
60%
40%
35%
20%
10%
10 20 30 40 50 60 70 80
Temperature (°C)
NSH5-V2
Type
5.7-inch Color TFT (Hand-held Version)
Case color
Black
Built-in Ethernet port
No
Model
NSH5-SQR10B-V2 (Emergency stop button: Red)
Rated power supply
voltage
24 VDC
NSH5-SQG10B-V2 (Stop button: Gray)
Allowable voltage range 20.4 to 27.6 VDC (24 VDC ±15%)
Power consumption
10 W max.
Ambient operating
temperature
0 to 40°C
Storage temperature
−20 to 60°C
Ambient operating
humidity
35% to 85% (0 to 40°C) with no condensation
Operating environment
No corrosive gases.
Noise immunity
Common mode: 1,000 Vp-p (between power supply terminals and panel)
Normal mode: 300 Vp-p
Pulse width: 100 ns to 1 μs, Rise time: 1-ns pulse
Vibration resistance
(during operation)
10 to 57 Hz, 0.075 mm amplitude, 57 to 150 Hz, 9.8 m/s2 30 min each in X, Y, and Z directions
Shock resistance
(during operation)
147 m/s2 3 times each in direction of X, Y, and Z
Weight
1 kg max.
Degree of protection
Equivalent to IP65.
Ground
Ground to 100 Ω or less.
Battery life
5 years (at 25°C): Replace battery within 5 days after the battery runs low (indicator lights orange).
Applicable standards
Certified for conformance to UL 508, EMC Directive, and EN 60204-1.
11
NS Series
Performance/Specifications
NS5
Series
NS5-V2
Model
NS5-SQ10-V2
NS5-SQ11-V2
NS5-SQ10B-V2
NS5-SQ11B-V2
NS5-TQ10-V2
NS5-TQ11-V2
NS5-TQ10B-V2
NS5-TQ11B-V2
Built-in Ethernet port
No
Yes
No
Yes
No
Yes
No
Yes
Case color
Ivory
Display device
TFT color LCD
Effective display area
Width 117.2 × height 88.4 mm (5.7 inches)
Display colors
256 colors
Number of dots
320 dot horizontal × 240 dot vertical
View angle
Left/right: 80°, Top: 80°, Bottom: 60° *5
Screen data capacity
60 Mbytes
Image data
(BMP or JPG images)
32,768 colors
Memory Card
Supported
Ladder Monitor function
Not supported
Video Input Unit support
Not supported
Controller Link Interface
Unit (Wired) support
Not supported
Black
Ivory
Black
Color High-luminance TFT *1
Service life * 3 75,000 hours min.
Backlight *2
Brightness
adjustment
Three-level or 32-level brightness adjustment from the touch panel screen. * 4
Backlight
error
detection *5
Error is detected automatically, and the RUN indicator flashes green as notification.
Method
Matrix resistive membrane type
Number of
Touch panel switches/
(matrix
resolution
type)
Input
Display text
300 (20 horizontal × 15 vertical) 16 × 16 dots for each switch
Pressure-sensitive
Service life
1,000,000 touch operations.
Labels
Can be specified in CX-Designer. Font, style, and size can be specified.
Numerals,
alarms, and
character
strings
Scalable Gothic: Magnification: 6 to 255 points
Rough:
Magnification: 1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
Standard:
Magnification: 1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
Fine:
Magnification: 1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
7-segment display: Can display only numerals, dates, and times.
Scalable Gothic, rough, standard, and fine can be used for 42 languages.
Japanese, simplified Chinese, traditional Chinese, Korean, English, French, German, Italian, Portuguese, Spain, Swedish, Dutch,
Supported
Finnish, Norwegian, Basque, Catalan, Danish, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Slovak, Slovenian,
languages
(42 languages) Bulgarian, Belarusian, Russian, Serbian, Macedonian, Ukrainian, Georgian, Icelandic, Afrikaans, Faroese, Indonesian, Greek,
Turkish, Estonian, Latvian, Lithuanian, Thai (supported only with scalable Gothic font)
Text
attributes
Flicker
Color
256 colors
Font style
(only when
vector font is
specified)
Bold or italic
Vertical
alignment
Top, center, or bottom
Horizontal
alignment
Left-justified, centered, or right-justified
Objects
supporting
flicker
Functional objects: Select from up to 10 types of registered flicker settings. The flicker speed and flicker range can be set.
Fixed objects:
Select from three flicker types.
Numeral units and scale
settings
1.000 max.
Alarm/event settings
5,000 max.
Expansion interface
For Expansion Interface Units (Beginning with units produced in Feb. 2018, connectors are not mounted)
*1. NS5-TQ series (high luminance TFT) luminance is better than that of NS5-SQ series by about 110 cd/m2.
*2. Contact your nearest OMRON representative to replace the backlight.
*3. This is the estimated time before brightness is reduced by half at room temperature and humidity. It is not a guaranteed value.
The service life will be dramatically shortened if PT is used at low temperatures. For example, using the PT at temperatures of 0°C will reduce
the service life to approximately 10,000 hours (reference value).
*4. Lot No. 15Z0 or later of NS5 models.
*5. This function does not indicate that the service life has been reached. It detects when the backlight is not lit due to a disconnection or other
errors.
Backlight error detection indicates that all backlights (2) are OFF.
12
NS Series
NS8/NS10/NS12/NS15
Series
NS8-V2
NS8NS8TV01- TV00B
V2
-V2
Yes
No
Black
Display device
High-definition TFT color LCD
High-definition TFT color LCD
High-definition TFT color LCD
Effective display area
Width 170.9 × height 128.2 mm
(8.4 inches)
Width 215.2 × height 162.4 mm
(10.4 inches)
Width 246.0 × height 184.5 mm
(12.1 inches)
Display colors
256 colors
Number of dots
640 dot horizontal × 480 dot vertical
Left/right: 70°, Top: 65°,
Bottom: 65° *3
800 dot horizontal × 600 dot
vertical
Left/right: 80°, Top: 80°,
Bottom: 80° *3
View angle
Screen data capacity
Image data
(BMP or JPG images)
Memory Card
Ladder Monitor function
Video Input Unit support
Controller Link Interface
Unit (Wired) support
Service life * 2
Brightness
adjustment
Backlight *1
Backlight
error
detection *4
Method
Number of
Touch panel switches/
(matrix type) resolution
Input
Service life
Labels
Left/right: 80°, Top: 80°,
Bottom: 60° *3
60 Mbytes
NS10TV00V2
No
Ivory
NS10TV01B
-V2
Yes
NS12TS00V2
No
Ivory
NS12-V2
NS12- NS12TS01- TS00B
V2
-V2
Yes
No
Black
Built-in Ethernet port
Case color
Model
NS8TV01B
-V2
Yes
NS10-V2
NS10- NS10TV01- TV00B
V2
-V2
Yes
No
Black
NS8TV00V2
No
Ivory
NS12TS01B
-V2
Yes
NS15-V2
NS15NS15TX01STX01BV2
V2
Yes
Yes
Silver
Black
High-definition TFT
color LCD
Width 304.1 × height
228.1 mm
(15 inches)
1,024 dot horizontal
× 768 dot vertical
Left/right: 80°, Top:
70°, Bottom: 60°
32,768 colors
Supported
Supported
(Only RGB input is
enabled.)
Supported (Image displayed via video input is 260,000 colors)
Not supported
Supported
50,000 hours min.
Three-level or 32-level brightness adjustment from the touch panel screen. * 3
Error is detected automatically, and the RUN indicator flashes green as notification.
Matrix resistive membrane type
768 (32 horizontal × 24 vertical)
20 × 20 dots for each switch
1,200 (40 horizontal × 30 vertical)
16 × 16 dots for each switch
1,900 (50 horizontal × 38 vertical)
16 × 16 dots for each switch
Analog resistive
membrane type *5
Resolution: 1,024
(horizontal) × 1,024
(vertical)
Pressure-sensitive
1,000,000 touch operations.
Can be specified in CX-Designer. Font, style, and size can be specified.
Scalable Gothic:
Magnification: 6 to 255 points
Numerals,
Rough: Magnification: 1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
alarms, and
Standard: Magnification: 1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
character
Fine: Magnification:
1×1, 1×2, 2×1, 2×2, 3×3, 4×4, 8×8
strings
Display text
7-segment display:
Can display only numerals, dates, and times.
Scalable Gothic, rough, standard, and fine can be used for 42 languages.
Supported
Japanese, simplified Chinese, traditional Chinese, Korean, English, French, German, Italian, Portuguese, Spain, Swedish, Dutch,
languages
Finnish, Norwegian, Basque, Catalan, Danish, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Slovak, Slovenian,
(42 languages) Bulgarian, Belarusian, Russian, Serbian, Macedonian, Ukrainian, Georgian, Icelandic, Afrikaans, Faroese, Indonesian, Greek,
Turkish, Estonian, Latvian, Lithuanian, Thai (supported only with scalable Gothic font)
Color
256 colors
Font style
(only when
Bold or italic
vector font is
Text
specified)
attributes
Vertical
Top, center, or bottom
alignment
Horizontal
Left-justified, centered, or right-justified
alignment
Objects
Functional objects: Select from up to 10 types of registered flicker settings. The flicker speed and flicker range can be set.
supporting
Flicker
Fixed objects:
Select from three flicker types.
flicker
Numeral units and scale
1.000 max.
settings
Alarm/event settings
5,000 max.
Expansion interface
For Expansion Interface Units
*1. Contact your nearest OMRON representative to replace the backlight.
*2. This is the estimated time before brightness is reduced by half at room temperature and humidity. It is not a guaranteed value.
The service life will be dramatically shortened if PT is used at low temperatures. For example, using the PT at temperatures of 0 °C will reduce
the service life to approximately 10,000 hours (reference value).
*3. Lot No. 28X1 or later of NS8 models, Lot No. 11Y1 or later of NS10 models, Lot No. 14Z1 or later of NS12 models, Lot No. 31114K or later of
NS15 models.
*4. This function does not indicate that the service life has been reached. It detects when the backlight is not lit due to a disconnection or other errors.
Backlight error detection indicates that all backlights (2) are OFF.
*5. An analog touch panel is used with the NS15. Do not press the touch panel in two or more places simultaneously.
If the touch panel is pressed in two or more places simultaneously, it may activate a switch between the points that are pressed.
13
NS Series
Communications
NS5/NS8/NS10/NS12/NS15
Memory Card
Interface
One ATA-Compact Flash interface slot
Functions
Used to transfer and store screen data, store logging data, and store history data. (Alarm/Event History, Operation
Log, and Error Log generated during Macro execution).
Connector
Conforms to EIA RS-232C. D-Sub female 9-pin connector 5-V output (250 mA max.) through pin 6.
The 5-V outputs of serial ports A and B cannot be used at the same time.
Functions
Host (PLC) access: 1:N NT Links (connections with CS/CJ/CP-series PLCs and C200HX/HG/HE(-Z) PLCs),
1:1 NT Links, or Host Link (connections with C Series or CVM1/CV-series PLCs)
Direct access to Temperature Controllers using Smart Active Parts:
CompoWay / F and bar code reader connections (Read directly from display.)
Connector
Conforms to EIA RS-232C. D-Sub female 9-pin connector. 5-V output (250 mA max.) through pin 6.
The 5-V outputs of serial ports A and B cannot be used at the same time.
Functions
Host (PLC) access: 1:N NT Links (connections with CS/CJ/CP-series PLCs and C200HX/HG/HE(-Z) PLCs) or
1:1 NT Links (connections with C Series or CVM1/CV-series PLCs)
Direct access to Temperature Controllers using Smart Active Parts:
CompoWay / F and bar code reader connections (Read directly from display.)
USB rating
USB1.1
Connector
TYPE-B (Slave)
Functions
Connection with the CX-Designer (for screen data transfers) Connecting to a PictBridge-compatible Printer
Recommended printers: EPSON: PM-G4500, PX-G5300, PX-5600, EP-901F
Canon: PIXUS MX7600, PIXUS iP100, PIXUS iX5000
USB rating
USB1.1
Connector
TYPE-A (Host)
Functions
Connection with a printer (for hard copies)
Recommended printers: EPSON: PX-G930
Conformance
standards
Conforms to IEEE 802.3/Ethernet (10 Base-T/100 Base-TX).
Functions
Host (PLC) access and connection with the CX-Designer (for screen data transfers)
Baud rate
2 M/1 M/500 K bps
Transmission
path
Shielded twisted-pair cable (special cable)
Functions
Host (PLC) access and data links
Resolution
NS-CA001: 320×240, 640×480, 800×600 dots
NS-CA002: User-defined size
Input signal
NS-CA001: NTSC composite video or PAL
NS-CA002: NTSC composite video or PAL
Number of
video inputs
NS-CA001: Number of cameras: 4 max.
NS-CA002: 2 cameras + RGB
Port A
Serial
Communications
Port B
USB
SLAVE
Specifications
USB HOST
Specifications *1
Built-in Ethernet
Specifications *2
Controller Link (Wiredtype)
Specifications *3
Video Input Specifications
*4
*1. Except NS5.
*2. NS@-@@@1-V2 only.
*3. Except NS5 and NS8.
*4. Except NS5 and NS15. NS15 provides RGB input. (NS-CA002)
14
NS Series
Connectable Devices
Supported OMRON PLCs
PLC series
C Series
CVM1/CV
Series
CS Series
CJ Series
CP Series
PLC model name
RS-232C *1
1:1 NT Link
Ethernet
1:N NT Link
Host Link
FINS *2
EtherNet/IP *3
Controller Link *4
CQM1
Yes
No
Yes
No
No
No
CQM1H
Yes
Yes
Yes
No
No
Yes
CPM1
Yes
No
Yes
No
No
No
CPM1A
Yes
No
No
No
No
No
CPM2A
Yes
No
Yes
No
No
No
CPM2C
Yes
No
Yes
No
No
No
C200HS
Yes
No
Yes
No
No
No
C200HE (-Z)
Yes
Yes
Yes
No
No
Yes
C200HG (Z)
Yes
Yes
Yes
No
No
Yes
C200HX (-Z)
Yes
Yes
Yes
No
No
Yes
CV500/1000/2000
Yes
No
Yes
Yes
No
Yes
CVM1
Yes
No
Yes
Yes
No
Yes
CS1H
No
Yes
Yes
Yes
Yes
Yes
CS1G
No
Yes
Yes
Yes
Yes
Yes
CS1D
No
Yes
Yes
Yes
Yes
Yes
CJ1H
No
Yes
Yes
Yes
Yes
Yes
CJ1G
No
Yes
Yes
Yes
Yes
Yes
CJ1M
No
Yes
Yes
Yes
Yes
Yes
CJ2H
No
Yes
Yes
Yes
Yes *5
Yes
CJ2M
No
Yes
Yes
Yes
Yes *5
Yes
CP1H
No
Yes
Yes
Yes
Yes
No
CP1L
No
Yes
Yes
Yes
No
No
CP1E
No
Yes
Yes
No
No
No
CP2E
No
Yes
Yes
Yes
No
No
Yes *6
Yes *6
Yes *6
No
Yes *7
No
No
No
No
No
Yes *8
No
NJ Series
NJ5/NJ3/NJ1
NX Series
NX7/NX1/NX1P
Note: Including models whose production were discontinued.
*1. To connect a NS with a PLC via a RS-422A connection, OMRON's NS-AL002, or CJ1W-CIF11 RS-232C/RS-422A Converter can be used to
convert the RS-232C port on the NS to RS-422A.
*2. A NS with Ethernet port is necessary.
When connecting a PLC with the NS, an Ethernet port is necessary on the PLC, too. Use a PLC CPU Unit with a built-in Ethernet port, or add
an Ethernet Unit.
*3. A NS with Ethernet port is necessary.
When connecting a PLC with the NS, an EtherNet/IP port is necessary on the PLC, too. Use a PLC CPU Unit with a built-in EtherNet/IP port,
or add an EtherNet/IP Unit.
*4. Install a Controller Link Interface Unit on the NS. A Controller Link Unit is necessary for the PLC.
*5. For CJ2, CX-Designer version 3.2 or later, and NS system version 8.4 or later are required.
*6. Mount a Serial Communications Unit on the NJ-series Controller. A NS can access only to the Controller's memory used for CJ-series unit.
*7. When using a EtherNet/IP Unit to connect the NJ-series Controller, NJ Troubleshooter is not supported.
For NJ5, CX-Designer version 3.3 or later, and NS system version 8.5 or later are required.
For NJ3, CX-Designer version 3.4 or later, and NS system version 8.61 or later are required.
Moreover, the multidimensional array is supported in the combination with NJ.
*8. For NX7, CX-Designer version 3.64 or later, and NS system version 8.9 or later are required.
For NX1P, CX-Designer version 3.70 or later, and NS system version 8.93 or later are required.
For NX1, CX-Designer version 3.70 or later, and NS system version 8.96 or later are required.
Moreover, the multidimensional array is supported in the combination with NX.
15
NS Series
Function Comparison
NJ
EtherNet/IP
Troubleshooter/
Tag access
PLC
Integrated
(Network
Troubleshooter
NS-series PT
symbols)
simulation *4
Ladder
Monitor
Device Monitor/
Switch Box
PLC Data
Trace
SPMA
SAP
CQM1
No
No
No
No
No
No
No
CQM1H
No
No
No
No
No
No
No
No
CPM1
No
No
No
No
No
No
No
No
CPM1A
No
No
No
No
No
No
No
No
CPM2A
No
No
No
No
No
No
No
No
CPM2C
No
No
No
No
No
No
No
No
C200HS
No
No
No
No
No
No
No
No
C200HE (-Z)
No
No
No
No
No
No
No
No
C200HG (-Z)
No
No
No
No
No
No
No
No
C200HX (-Z)
No
No
No
No
No
No
No
No
CV500/1000/2000
No
No
No
No
No
No
No
No
CVM1
No
No
No
No
No
No
No
No
CS1H
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CS1G
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CS1D
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CJ1H
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CJ1G
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CJ1M
Yes
Yes
Yes
Yes
Yes
No
Yes
No
CJ2H
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
CJ2M
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
CP1H
Yes
Yes
Yes
Yes *1
Yes
No
No
No
CP1L
Yes
Yes
Yes
Yes *1
Yes
No
No
No
CP1E
No
No
No
Yes *1
No
No
No
No
CP2E
No
No
No
Yes *1
No
No
No
No
NJ series
NJ5/NJ3/NJ1
No
Yes *2
No
No
Yes *3
Yes
No
Yes
NX Series
NX7/NX1/NX1P
No
No
No
No
No
Yes
No
Yes
PLC series
C series
CVM1/CV
series
CS series
CJ series
CP series
PLC model name
Note: Including models whose production were discontinued.
*1. The SPMA relaying a PLC is not supported.
*2. Only Device Monitor function is supported. Monitoring function that uses tags (variables) is not supported.
*3. The SAP for CJ-series Special I/O Units and CPU Bus Units that can be used with NJ-series Controller is supported.
*4. Sysmac Studio version 1.02 or higher (CX-Designer version 3.41 or higher) is required.
16
No
NS Series
Connectable Inverters
Series
3G3MX2-V1
Communication Unit
Connection
(Use the RS-485 terminal on the Inverter)
3G3JX
(Use the RS-485 connector on the Inverter)
3G3RX-V1
(Use the RS-485 terminal on the Inverter)
RS-485 (2-wire)
1:N
Connectable Temperature Controllers
The following Temperature Controllers can be connected directly to an NS-series PT*.
Unit name
Series
Model
Modular Temperature Controller
EJ1
EJ1-EDU End Unit
Modular Temperature Controller
E5ZN
E5ZN-SCT24S Terminal Unit
E5AR
E5AR-@@@@@@@@@-FLK
E5ER
E5ER-@@@@@@@@@-FLK
Digital Controller
Remarks
E5CN-@@@@@T-FLK Multi-input
(Thermocouple/Resistance Thermometer) Type
E5CN-@@@@@L-FLK Analog Input Type
E5AN/E5EN/E5CN
(Basic Model)
E5EN-@@@@@T-FLK Multi-input
(Thermocouple/Resistance Thermometer) Type
E5EN-@@@@@L-FLK Analog Input Type
SAP screens are
available.
E5AN-@@@@@T-FLK Multi-input
(Thermocouple/Resistance Thermometer) Type
Temperature Controller
(Digital Controller)
E5AN-@@@@@L-FLK Analog Input Type
E5AN-H/E5EN-H/
E5CN-H
(Advanced Model)
E5GN
E5CN-H@@@@@@@-FLK Universal-input Model
E5EN-H@@@@@@@@-FLK Universal-input Model
E5AN-H@@@@@@@@-FLK Universal-input Model
E5GN-@@@TC-FLK Thermocouple Input Type
E5GN-@@@P-FLK Resistance Thermometer Input Type
Note: Including models whose production were discontinued.
* The NS-Runtime cannot be connected directly to a Temperature Controller.
17
NS Series
Connecting to Another Company’s PLC
Manufacturer
Series
A Series
FX Series
Mitsubishi Electric
Q/QnA Series
CPU
Computer Link Unit
A1SJ71UC24-R@
A1SJ71UC24-PRF
A2ACPU
Computer Link Unit
AJ71UC24
FX0N
FX1S
FX1N
FX1NC
FX2N
FX3UC
FX3G
Communication special adapter
FX3U-232-ADP
FX2NC-232ADP
FX0N-232-ADP
Connection diagram
RS-232C,
RS422A/485 *1
1:1
RS-232C,
RS422A/485 *1
1:1
RS-232C
1:1
RS-232C,
RS-485 (4-wire) *2
1:N
Communication expansion board
FX@@-232-BD
Q00CPU
Q01CPU
RS-232C port on the CPU Module
Q00CPU
Q01CPU
Q00JCPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q03UDCPU
Q06UDHCPU
Q13UDHCPU
Serial Communications Module
QJ71C24N-R2
QJ71C24N-R4
QJ71C24N
Q2ASCPU
Q2ASCPU-S1
Q2ASHCPU
Q2ASHCPU-S1
Serial Communications Module
A1SJ71QC24N
CPU built-in RS-232C port
RS-232C
Personal Computer Link Module
F3LC11-1F
F3LC12-1F
F3LC11-2F
RS-232C, RS-422A/485 *1
CPU313
CPU315-2DP
CPU317-2PN/DP
SIMATIC S7 HMI Adapter
6ES7 972-0CA1@-0XA0
RS-232C
1:1
SLC5/03
SLC5/04
SLC5/05
RS-232C port on the CPU Module
RS-232C
1:1
1:1
Yokogawa
Electric
FA-M3(R) Series
F3SC23-1F
F3SP21-0N
F3SP28-3S
F3SP58-6S
F3SP67-6S
Siemens
S7-300 Series
SLC500
Rockwell
(Allen-Bradley)
Communication Unit/Adapter/Board
A1SHCPU
A2USCPU
A2USHCPU-S1
MicroLogix
MicroLogix 1500
RS-232C port on the CPU Module
RS-232C
ControlLogix
Logix5555
RS-232C port on the CPU Module
RS-232C
1:1
CompactLogix
1769-L31
RS-232C port on the CPU Module
RS-232C
1:1
PLC-5
PLC-5/20
RS-232C port or RS-485 port on the
CPU Module
RS-232C/RS-485 (4-wire)
1:N
*1. To connect using RS-422A/485, an RS-232C/422A converter (e.g. NS-AL002, CJ1W-CIF11) is required.
*2. To connect using RS-485, an RS-232C/422A converter (e.g. NS-AL002, CJ1W-CIF11) is required.
Up to 32 sequencers can be connected when using RS-485.
18
1:1
NS Series
Component Names and Options
NS15
RS-422A/485 Serial Interface
Memory Card interface
Memory Card
Note:
Colors shown
in photographs and
product names may
differ from actual
colors and names.
Expansion interface
Battery
Analog RGB Output
RS-232C serial port A
RS-232C serial port B
A bar code reader can be connected to the serial port.
Recommended bar code reader: V520-RH21-6 *
Connector for
Brightness Adjustment
Ethernet (10 Base-T or 100 Base-TX)
USB SLAVE (For transferring screens and connecting a PictBridge-compatible printer)
USB HOST (for printer)
Power Supply (24 VDC)
NS12/10
Memory Card interface
Memory Card
Note:
Colors shown
in photographs and
product names may
differ from actual
colors and names.
Expansion interface
Battery
RS-232C serial port A
RS-232C serial port B
Power Supply (24 VDC)
A bar code reader can be connected to the serial port.
Recommended bar code reader: V520-RH21-6 *
Ethernet (10 Base-T or 100 Base-TX)
USB SLAVE (For transferring screens and connecting a PictBridge-compatible printer)
USB HOST (for printer)
NS8
Memory Card interface
Expansion interface
Memory Card
Battery
RS-232C serial port A
RS-232C serial port B
Note:
Colors shown in photographs
and product names may
differ from actual colors and
names.
A bar code reader can be connected to the serial port.
Recommended bar code reader: V520-RH21-6 *
Ethernet (10 Base-T or 100 Base-TX)
Power Supply
(24 VDC)
USB SLAVE (For transferring screens and connecting a PictBridge-compatible printer)
USB HOST (for printer)
* Bar Code Reader (V520-RH21-6) was discontinued at the end of August 2016.
19
NS Series
NS5
Memory Card interface
Memory Card
Note:
Colors shown
in photographs and
product names may
differ from actual
colors and names.
Expansion interface
(Beginning with units produced in Feb. 2018,
connectors are not mounted)
Ethernet (10 Base-T or 100 Base-TX)
USB SLAVE (For transferring screens and
connecting a PictBridge-compatible printer)
Battery
Power Supply (24 VDC)
RS-232C serial port A
RS-232C serial port B
A bar code reader can be connected to the serial port.
Recommended bar code reader: V520-RH21-6 *
* Bar Code Reader (V520-RH21-6) was discontinued at the end of August 2016.
NSH5
USB Port
Enable Switch
Memory Card interface
LED
Emergency Stop Switch
Function Switches
Hand Strap
Cable
Optional Products
Video Input Unit
NS-CA001 (with Cover)
RGB/Video Input Unit
NS-CA002 (with Cover)
Controller Link Interface Unit RS-422A Adapter
NS-CLK21 (with Cover)
CJ1W-CIF11
Communications Cable
XW2Z-S002
Protective Cover/Anti-reflection
Sheet for NS-series PT
NS-KBA0 (N)
NT30/NT31C-KBA05 (N)
USB Serial Conversion Cable USB relay cable
CS1W-CIF31
(IP65 oil-proof type)
NS-USBEXT-1M
20
RS-232C/RS-422A
Conversion Unit
NS-AL002
NS Series
Dimensions
(Units: mm)
NS15
170
Mounting Panel
Mounting Bracket
79.54
13.95
94.8
RUN
RDA
RDB
SDA
46
SDB
27.4
282
304.5
304
71.8
RSA
RSB
57.31
3.8
86.83
85.6
8
405
37.9 (min.)
41.1 (max.)
70
75.8
39.4
84.1
Recommended Panel Cutout Dimensions
15.5
340
383
405.5
+1
282.5 −0
383.5 +1
−0
NS12/10
Recommended Panel Cutout
Dimensions
140 241
228 +1
−0
SW
227 249
RESET
121
24V
DC
PORT B
HOST
134
PORT A
SLAVE
ETHERNET
15.5
264
315
323
7.5
39 (min.)
48.5 42 (max.)
3.8
49
302 +1
−0
13.7
49.9
23
90.4
301
NS8
NS5
39.83
165 188
177
27.3
15.5
5
48.5
153.3
130.5
RUN
142
44.55
180
232
195
39 (min.)
42 (max.)
15.5
5
145
90
49
53.8
206.3
220
34 (min.)
38 (max.)
54.8
183.5
Recommended Panel
Cutout Dimensions
Recommended Panel
Cutout Dimensions
SW
131 +0.5
−0
RESET
24V
DC
120.5
PORT B
PORT A
68.48
165.5 +0.5
−0
107.6
ETHERNET
HOST
ETHERNET
21
51.7
19.1
220.5 +0.5
−0
26.6
9.6
19.5
184 +0.5
−0
77
44.1 50.1
63.4
21
NS Series
Hand-held NS5
16.5
223
70.5
75
50
176
75
81.3
9.6
164
(169)
9.6
164
(169)
(1.9)
127.3
50.3
68.3
86.3
104.3
9.7
20.4
11
(102.7)
151.5
(183)
21.4
5
(22.3)
10.6
81.3
(102.7)
21.4
(1.9)
NS-CLK21
Controller Link Interface Unit
NS-CA002
Video Input Unit
NS-CA001
Video Input Unit
31.5
9.7
(22.3)
11.1
5
5
164
20.4
11
(1.9)
39.3
57.3
82.8
118.3
(169)
10.8
(33.9)
32
11
95.6
Related Manuals
Cat. No.
V083
22
Model
Manual
NS15/NS12/NS10/NS8/NS5
NS-Series Programmable Terminals SETUP MANUAL
NS-Series Programmable Terminals PROGRAMMING MANUAL
V073
NS15/NS12/NS10/NS8/NS5
V099
NS-CXDC1-V3
CX-Designer Ver.3.@ USER'S MANUAL
V082
NS
NS-Series Ladder Monitor OPERATION MANUAL (Ladder Monitor I/O Comment Extracting Tool)
V086
NS-CA002
NS-Series RGB and Video Input Unit OPERATION MANUAL
V090
NSH5
NSH5-Series Hand-held Programmable Terminal OPERATION MANUAL
NS-Series Programmable Terminals HOST CONNECTION MANUAL (Host Link) OPERATION MANUAL
V098
NS15/NS12/NS10/NS8/NS5
V085
NS15/NS12/NS10/NS8/NS5
NS-Series Programmable Terminals HOST CONNECTION MANUAL
V092
NS15/NS12/NS10/NS8/NS5
NS-Series Programmable Terminals HOST CONNECTION MANUAL Multivendor Connection
V075
NS15/NS12/NS10/NS8/NS5
NS-Series Programmable Terminals Macro Reference
V093
NS-NSRCL@@
NS-NSRCL@@ NS-Runtime Software USERS MANUAL
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • automation.omron.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55 11 5171-8920 • automation.omron.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
Ciudad de México • 52.55.5901.4300 • 01.800.386.6766 • mela@omron.com
OMRON ARGENTINA • SALES OFFICE
Buenos Aires, Argentina • +54.11.4521.8630 • +54.11.4523.8483
mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • mela@omron.
com
OTHER OMRON LATIN AMERICA SALES
+54.11.4521.8630 • +54.11.4523.8483 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Eugenio Garza Sada,León, Gto • 01.800.386.6766 • mela@omron.com
Controllers & I/O
• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O
Authorized Distributor:
Robotics
• Industrial Robots • Mobile Robots
Operator Interfaces
• Human Machine Interface (HMI)
Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters
Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification
Systems
Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors
Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays
Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products
Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays
Software
• Programming & Configuration • Runtime
V50I-E3-17
Note: Specifications are subject to change.
© 2020 Omron. All Rights Reserved.
Printed on recycled paper.
Printed in U.S.A.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
NSJ5-SQ10-M3D NSJ5-SQ10B-M3D NSJ5-SQ11-M3D NSJ5-SQ11B-M3D NSJ5-TQ10-M3D NSJ5-TQ10B-M3D
NSJ5-TQ11-M3D NSJ5-TQ11B-M3D NSJ5-SQ10-G5D NSJ5-SQ10B-G5D NSJ5-SQ11-G5D NSJ5-SQ11B-G5D
NSJ5-TQ10-G5D NSJ5-TQ10B-G5D NSJ5-TQ11-G5D NSJ5-TQ11B-G5D NS-AL002 NS-CXDC1-V3 NS10-TV00BV2 NS12-TS01B-V2 NSJ10-TV01-G5D NS12-TS01-V2 NSJ12-TS00B-G5D NS8-TV00-V2 NS10-TV01-V2 NS12KBA05 NS7-KBA04 NS10-TV01B-V2 NS12-TS00-V2 NS10-TV00-V2 NSJ10-TV00-G5D NS7-KBA05 NSJ10TV01B-G5D NSJ10-TV00B-G5D NSJ12-TS00-G5D NSJ12-TS01-G5D NS12-TS00B-V2 NS8-TV01-V2 NSJ12TS01B-G5D NS12-KBA04 NS8-TV01B-V2 NSH5-ATT02 NSJ8-TV01-G5D NS8-ATT01 NS-NSRCL10 NS-NSRCL3
NS-CLK21 NS-NSRCL1 NS8-ATT02 NSJ8-TV01B-G5D NSJW-IC101 NSJW-CLK21-V1 NSJW-ETN21 NS12ATT01 NS12-TS01B-V2-HB NS15-KBA04 NS15-KBA05N NS15-TX01B-V2 NS15-TX01S-V2 NS5-MQ10B-V2 NS5MQ10-V2 NS5-MQ11B-V2 NS-CXDC1-V2 NSH5-232CW-3M NSH5-232UL-10M NSH5-232UL-3M NSH5-422UL10M NSH5-AL001 NS5-SQ10B-V2 NS5-SQ10-V2 NS5-SQ11B-V2 NS5-TQ10B-V2 NS5-TQ11B-V2 NS7-KBA05N
NSA-BAT01 NS-CXDC1-V1 NS-CXDC1-V1S NSH5-SQG10B-V2 NSH5-SQR10B-V2 NS8-TV00B-V2 NS5-SQ11-V2
NS5-SQ00B-V2 NS-US52 NS-US22 NS5-TQ10-V2 NS5-TQ11-V2 NSJ8-TV00-G5D NSJ8-TV00B-G5D NSA12TX01B-E NSA12-TX01S-E NSA15-TX01B-E NSA15-TX01S-E NS-CA001 NS-CA002 NSJ8-TV00B-M3D NSJ8TV00-M3D NSJ8-TV01B-M3D NSJ8-TV01-M3D NS-USBEXT-1M NS12-KBA05N
工商网监
湘ICP备2023018690号
