NV3Q-KBA04

Programmable Terminal NV Series Compact and Simple, Extremely High Cost Performance The Best PT for Package PLCs A Lineup of 14 Models That Redefine “Compact” The Best PT for Package PLCs- NV The NV Series of compact Programmable Terminals meet the basic needs for enhanced visibility, simplicity, and cost, and they go even further to provide superior PLC compatibility, easy operation, and cost performance. Visibility Beautiful, Easy-to-understand Displays Instantly know the system status Easy Visual Recognition It is obvious in three color LED backlight True Type Fonts for Flexible Screen Designs The monochrome models provide three backlight colors to perform status displays.For example, use green for normal operation, orange for user controls, and red for errors so that the operating status can be seen at a glance. You can use True Type fonts in a wide range of sizes from 10 to 240 dots to flexibly design beautiful screens. NV3W-MG-V1/NV4W-MG Normal Operation User Controls Error Displays Green Orange Red The red backlight makes error displays bright and easy to see. NV3W-MR-V1/NV4W-MR Normal Operation User Controls Error Displays White Pink Red * The maximum font size depends on the model. True Type Fonts You can select the best Windows® fonts to create the desired screen images or emphasize screen appearance. Variation A Lineup of 14 Models That Form a New Standard for Small 3.8 4.6 inch Compact Horizontal Models NV3W-V1 Monochrome TFT A 5-V model is available that can be powered from an OMRON PLC 2 inch Compact Horizontal Models Display colors : Monochrome , 2 grayscale levels 240 × 96 dots Backlight : LEDs, 3 colors (green, orange, and red) Display colors : Monochrome , 2 grayscale levels 240 × 96 dots Backlight : LEDs, 3 colors (white, pink, and red) USB Slave USBス レーブ RS-232C RS-422A/485 Vertical installation 5 VDC 24 DCVDC 24V SD memory card NV4W Monochrome TFT Display colors : Monochrome , 2 grayscale levels or 8 grayscale levels 320 × 120 dots Backlight : LEDs, 3 colors (green, orange, and red) USB Slave USBス レーブ RS-232C RS-232C Vertical installation 縦置き 5 VDC DC 5V “ ” Vstands for the three benefits Value Easy design work and superior PLC compatibility Visiblity Variation Beautiful, easy-to-understand displays A lineup of ten 3-inch models for easy selection Value Easy Designing The slim design of NV-series PTs requires very little installation space. Vertical Installation The PT can be installed vertically to enable more applications.This enables more flexible designs. Global Application Multi-language Support and Safety Standard Compliance You can switch parts labels and languages. Record up to sixteen character strings in different languages and change all labels at the same time. Switching the language during operation is also very easy. International safety standards have also been met so that you can easily export equipment or transport equipment overseas. Switch Parts Labels Japanese English* Simplified Chinese Traditional Chinese Safety Standards Korean * Including European languages. * Only the NV3W-V1 has the KC mark. Handle Devices from Various Manufacturers Global Multivendor Support You can connect the PT to OMRON or Mitsubishi Electric PLCs or to PLCs from many other global manufacturers.This lets you connect the NV-series PTs without changing the PLC. You can easily use a different PLC manufacturer for each project. 28mm PTs Vertical Installation Supported Applicable PLCs Supported by NV3W-V1 and NV4W OMRON, Mitsubishi Electric, Keyence, Hitachi, Allen-Bradley, Siemens, etc. The lineup includes compact and horizontal models from 3.8-inch to 4.6-inch and QVGA models. Select the size and price that are best for each system. 3.6 inch QVGA Models Display colors : Monochrome , 2 grayscale levels or 8 grayscale levels 320 × 120 dots Backlight : LEDs, 3 colors (white, pink, and red) RS-422A/485 RS-422A/485 24 VDC DC 24V SD memory card SDメ モリカー ド NV3Q Monochrome TFT Color TFT Display colors : Monochrome , 2 grayscale levels 320 × 240 dots Backlight : LEDs, 3 colors (white, pink, and red) Display colors : 4096 colors 320 × 240 dots Backlight : White LED USB Slave USBス レーブ RS-232C RS-232C RS-422A/485 RS-422A/485 Vertical installation 縦置き 5 VDC DC 5V 24 VDC DC 24V SD memory card SDメ モリカー ド 3 Easy Connection to External Devices NV3W-V1 3.8 inch NV3W-MG@0(L)-V1 Monochrome TFT NV3W-MR@0(L)-V1 Monochrome TFT Compact Horizontal Models Battery-free Operation Screen Conversion Internal Storage of Required Data in the PT An NV-series PT can be operated without a battery. No maintenance battery is required. Data Backed Up without a Battery NV Configuration Base Screens Keyboard Screens Recipes Write Address Data Flow Display Data The NV-Designer version 2.0 or higher provides the function to convert NV3W screens into NV3W-V1 screens. Data required for operation is backed up Note. An optional battery cannot be mounted in an NV3W-V1 PT. RS-232C Cable XW2Z-200T-4 Commercially available USB cable (Mini-B) PLC NV-Designer Serial Communications/Power Supply Connector Supply Power from the PLC NV3W-V1 Only Tool Port / USB1.1 Compatibility Transfer Ladder Programs and With 5-V NV3W-V1 models, 5-V can be supplied from the PLC via the PLC Connecting Cable.This reduces wiring work and eliminates the need for a special power supply for the PT. Supplying 5-V from the PLC PT Screens without Changing the Cable Ladder programs can be transferred, debugged, or monitored for an OMRON PLC from the CX-Programmer running on a computer connected to the NV-series PT while communicating through the NV-series PT. Computer running NV-Designer Host Link connection CX-Programmer 5-V power supply NV3W-V1 External power supply not required PLC Connecting Cable with 5-V Line 4 Communicate through the PT PLC CP/CJ/CS series *An XW2Z-200T-4 PLC Connecting Cable is required to supply power from the PLC. *With 24-V PTs, power must be supplied from an external power supply. Compatibility Same cable as for the NV-Designer *Refer to Support Software on page 7 for applicable versions of the CX-One. Ladder diagrams can be transferred and the PLC can be monitored from the CX-Programmer. Host Link connection No need to change the cable between the PT and PLC. PLC CP/CJ/CS series for Easy Maintenance NV4W 4.6 inch NV4W-MG　1 Monochrome TFT NV4W-MR□1 Monochrome TFT Compact Horizontal Models Optional Battery Battery-free Operation NV-BAT01 Internal Storage of Required Data in the PT Back up PLC memory in the PT with an optional battery. An NV-series PT can be operated without a battery. No maintenance battery is required. An optional battery can be mounted in an NV4Q PT to back up specified addresses from PLC memory. This allows you, for example, to back up memory areas that are not held in the PLC when using a CP1E PLC without a battery. Data Backed Up without a Battery NV Configuration Base Screens Keyboard Screens Data required for operation is backed up Recipes Write Address Data Flow Display Data Data That Can Be Backed Up with a Battery Up to 24 words of PLC memory Clock data Internal PT memory Alarm history Password Back up words from PLC memory CP1E Commercially available USB cable （Mini-B） 24-V power supply PLC SD Memory Card An SD memory card slot (2 GB max.) is provided as a standard feature Use SD memory cards to easily back up and restore screen data. Tool Port NV-Designer Serial Communications/Power Supply Connector This connector supplies 24 VDC. Compatibility Transfer Ladder Programs and PT Screens without Changing the Cable USB1.1 High-speed Screen Transfers with Commercially Available USB Cable A USB interface is provided to effectively use computer software environments.Screens that are created on the computer can be quickly transferred to the PT using a commercially available USB cable (Mini-B). 5 NV3Q-MR 1 Monochrome TFT NV3Q-SW 1 Color TFT QVGA Models Optional Battery Battery-free Operation NV-BAT01 Internal Storage of Required Data in the PT Back up PLC memory in the PT with an optional battery. An NV-series PT can be operated without a battery. No maintenance battery is required. An optional battery can be mounted in an NV3Q PT to back up specified addresses from PLC memory. This allows you, for example, to back up memory areas that are not held in the PLC when using a CP1E PLC without a battery. Data Backed Up without a Battery NV Configuration Base Screens Keyboard Screens Data required for operation is backed up Recipes Write Address Data Flow Display Data Data That Can Be Backed Up with a Battery Up to 24 words of PLC memory Clock data Internal PT memory Alarm history Password Back up words from PLC memory CP1E Commercially available USB cable (TYPE-B) 24-V power supply PLC Serial Communications/Power Supply Connector This connector supplies 24 VDC. SD Memory Card An SD memory card slot ( 2 GB max.)* is provided as a standard feature Use SD memory cards to easily b a c k u p a n d re s t o re s c re e n data. *The capacity of the SD memory card is 32 MB to 1 GB for PT system program version 1.0 . 6 NV-Designer Tool Port Compatibility Transfer Ladder Programs and PT Screens without Changing the Cable USB1.1 High-speed Screen Transfers with Commercially Available USB Cable A USB interface is provided to effectively use computer software environments.Screens that are created on the computer can be quickly transferred to the PT using a commercially available USB cable (TYPE-B). Programmable Terminals NV-series Compact and Simple, Extremely High Cost Performance • The lineup includes compact and horizontal models from 3.8-inch to 4.6-inch and QVGA models. • Trur Type Fonts for Flexible Screen Designs. • Space-saving Installation. • Multi-language Support and Safety Standard Compliance. System Configuration NV3W-V1 Tool Port RS-232C or RS-422A/485 Port PT-to-PLC Connecting Cable (For RS-232C) XW2Z-200T-4 (2m with 5-V line) XW2Z-200T-3 (2m) XW2Z-500T-3 (5m) Serial Communications USB PLC Commercially available USB cable Mini-B Personal computer NV4W/NV3Q Tool Port RS-232C or RS-422A/485 Port SD memory Card SD memory card (32 MB to 2 GB) Serial Communications PT-to-PLC Connecting Cable (For RS-232C) XW2Z-200T-3 (2m) XW2Z-500T-3 (5m) PLC USB Commercially available USB cable NV4W : Mini B NV3Q : TYPE-B Personal computer Windows is either registered trademarks or trademarks of Microsoft Corporation in the United Status and/or other countries. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. The product photographs and figures that are used in this catalog may vary somewhat from the actual products. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. 7 NV-series Ordering Information Programmable Terminals Product name Specifications Screen size 3.8-in, TFT monochrome Number of dot 240 × 96 dots NV3W-V1 3.8-in, TFT monochrome 240 × 96 dots 4.6-in, TFT monochrome 320 × 120 dots 4.6-in, TFT monochrome 320 × 120 dots NV4W 3.6-in, TFT monochrome Power supply voltage RS-232C 5 VDC RS-232C 24 VDC RS-422A/485 24 VDC RS-232C 5 VDC RS-232C 24 VDC RS-422A/485 24 VDC RS-232C 24 VDC RS-422A/485 24 VDC RS-232C 24 VDC RS-422A/485 24 VDC 320 × 240 dots (QVGA) RS-232C 24 VDC RS-422A/485 24 VDC 320 × 240 dots (QVGA) RS-232C 24 VDC RS-422A/485 24 VDC NV3Q 3.6-in, TFT color Communications Backlight LEDs, 3 colors (green, orange, and red) LEDs, 3 colors (white, pink, and red) Model NV3W-MG20L-V1 NV3W-MG20-V1 NV3W-MG40-V1 NV3W-MR20L-V1 NV3W-MR20-V1 NV3W-MR40-V1 LEDs, 3 colors (green, orange, and red) NV4W-MG21 LEDs, 3 colors (white, pink, and red) NV4W-MR21 LEDs, 3 colors (white, pink, and red) NV3Q-MR21 NV4W-MG41 NV4W-MR41 NV3Q-MR41 NV3Q-SW21 White LED NV3Q-SW41 Programming Devices Product name Specifications FA Integrated Tool Package CX-One Lite Ver.4.@ CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. *1 CX-One Lite runs on the following OS. Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version) CX-One Lite Ver. 4.@ includes NV-Designer Ver.1.@. FA Integrated Tool Package CX-One Ver. 4.@ CX-One is a comprehensive software package that integrates the Support Software for OMRON PLCs and components. *2 CX-One runs on the following OS. Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version) CX-One Ver. 4.@ includes NV-Designer Ver.1.@. Model Number of licenses Media 1 license DVD CXONE-LT01D-V4 1 license *3 DVD CXONE-AL01D-V4 Note: 1. NV-Designer version 2.0 or higher is required to use the NV3W-V1. NV-Designer version 1.0 or higher is required to use the NV3Q. NV-Designer version 1.1 or higher is required to use the NV4W. 2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer. *1. CX-One Lite Ver.4.@ provides the following Support Software : Micro PLC Edition CX-Programmer Ver.9.@, CX-Integrator Ver.2.@, Switch Box Utility Ver.1.@, CX-Simulator Ver.1.@, CX-Drive Ver.2.@, CX-Designer Ver.3.@, NV-Designer Ver.1.@ or higher, CX-Thermo Ver.4.@, CX-ConfiguratorFDT Ver.1.@, Network Configurator Ver.3.@, and CX-Server Ver.4.@. *2. For details, refer to the CX-One Catalog (Cat. No : R134). *3. Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One. 8 NV-series Options (Sold separately) Product name PT-to-PLC Connecting Cable Programming Device Connecting Cable USB-Serial Conversion Cable Battery *2 Display Protective Sheets Attachment Specifications Model For the NV3W with 5-V power (NV3W-MG20L-V1/MR20L-V1 only) Length: 2m XW2Z-200T-4 For the NV3W-V1, NV4W, and NV3Q Length: 2m XW2Z-200T-3 For the NV3W-V1, NV4W, and NV3Q Length: 5m XW2Z-500T-3 For the NV3W Length: 3m NV-TOL-3M For the NV3W Use this Cable together with the NV-TOL-3M to connect to a USB connector on the computer. Note : The enclosed USB driver must be installed. Length: 0.5m CS1W-CIF31 For the NV4W and NV3Q NV-BAT01 For the NV3W-V1, contains 10 sheets NV3W-KBA04-V1 For the NV4W, contains 10 sheets NV4W-KBA04 For the NV3Q, contains 10 sheets NV3Q-KBA04 NP3 Series to NV3Q Series NV3Q-ATT02 *1 Note: For NV3W-V1 and NV4W, use commercially available USB cable (Mini B). For NV3Q, use commercially available USB cable (TYPE-B). *1. If the XW2Z-200T-4 Cable is used with the NV3W-V1, 5 V can be supplied from the CS/CJ/CP-series PLCs instead of from an external power supply. Refer to the NV-series PT Setup Manual (Cat.No V103) for details. *2. Cannot be used for the NV3W-V1. 9 NV-series Specifications General Specifications Item Model Rated power supply Operating voltage range Current consumption Ambient operating temperature Ambient operating humidity Ambient storage temperature Ambient storage humidity Dielectric strength Insulation resistance Vibration resistance Shock resistance Noise immunity Resistance to environment Battery life expectancy Safety standards Weight NV3W-M@20-V1/M@40-V1 24 VDC 21.6 to 26.4 VDC 1.9 W max. (80 mA max.) NV3W-M@20L-V1 5 VDC 4.5 to 5.5 VDC 1 W max. (200 mA max.) Specifications NV4W-M@21/M@41 24 VDC 21.6 to 26.4 VDC 1.7 W max. (70 mA max.) NV3Q-MR@1 NV3Q-SW@1 2.4 W max. (100 mA max.) 3.6 W max. (150 mA max.) 0 to 50 °C 20% to 85% (with no condensation) -20 to 60 °C 10% to 85% (with no condensation) Between the power supply terminals and the case 500 VAC for 1 min with a cutoff current of 10 mA (at initial state) Between the power supply terminals and the case 100 MΩ (at 500 VDC) (at initial state) 5 to 8.4 Hz, 3.5-mm single 5 to 9 Hz, 3.5-mm single amplitude, 8.4 to 150 Hz, amplitude, 9 to 150 Hz, 10 to 55 Hz with 0.75-amplitude for 10 min each in X, 2 9.8 m/s , 10 times each in 9.8 m/s2, 10 times each in Y, and Z directions, 1 sweep per min X, Y, and Z directions X, Y, and Z directions (1 octave/min) (1 octave/min) 147m/s2 3 times each in X, Y, and Z directions 98m/s2 4 times each in X, Y, and Z directions 1,000 Vp-p with pulse widths of 50 ns and 1 μs between power supply terminals (via simulator) For NV3Q IP65 (at initial state), For NV3W-V1, NV4W IP67 (at initial state) Dust proof and drip proof only from the front of the panel (using Waterproof Packing at the contact surface with the panel) Replace the Waterproof Packing each time you reinstall the PT. Battery life expectancy: --Battery life expectancy: 5 yr (at 25 °C) * 3 yr (at 25 °C) * UL 508, EC Directives and KC UL 508 and EC Directives 170 g max. 240 g max. 210 g max. * The SRAM (internal RAM) is backed up by the battery. If backing up the data is required, purchase the NV-BAT01 Battery separately. Performance Specifications Model Item NV3W-MG@@(L)-V1/MR@@(L)-V1 Specifications NV4W-M@21/M@41 Display device TFT monochrome LCD *8 TFT monochrome LCD *9 240 × 96 dots (H × V) 88.5 × 35.4 mm (H × V) 50,000 hours min. *1 NV3W-MG-V1 : LED backlights, 3 colors (green, orange, and red) NV3W-MR-V1 : LED backlights, 3 colors (white, pink, and red) Method Analog resistive membrane type Operating force 0.8 N max. Life expectancy 100 million operations min. (at 25 °C) Switches 50 max. per screen *2 Size 8 dots × 8 dots min. *3 Number of dots Effective display size Service Life Backlights Touch switches External memory --- 320 × 120 dots (H × V) 109 × 41 mm (H × V) NV4W-MG : LED backlights, 3 colors (green, orange, and red) NV4W-MR : LED backlights, 3 colors (white, pink, and red) NV3Q-MR@1/ SW@1 NV3Q-MR: TFT monochrome LCD *6 NV3Q-SW: TFT color LCD *7 320 × 240 dots (H × V) 70.6 × 52.9 mm (H × V) NV3Q-MR: LED backlights, 3 colors (white, pink, and red) NV3Q-SW: LED backlight, 1 color (white) 100 max. per screen *2 SD memory card (32 MB to 2 GB) *4 Manufacturers for which operation has been confirmed: Panasonic SD standard *5 NV4W-M@21: NV3Q-@@21 : RS-232C (not isolated), Transmission RS-232C (not isolated), Transmission distance: 15 m, Connector:8-pin distance: 15 m, Connector: 8-pin NV4W-M@41: NV3Q-@@41 : RS-422A/485 (not isolated), RS-422A/485 (not isolated), Transmission distance: 500m, Transmission distance: 500 m, Connector: 8-pin Connector: 8-pin Host communic ations COM Port NV3W-M@20(L)-V1 : RS-232C (not isolated), Transmission distance: 15 m, Connector : 8-pin NV3W-M@40-V1 : RS-422A/485 (not isolated), Transmission distance: 500 m, Connector : 8-pin Support Software communic ations USB port USB 1.1 Mini-B, Transmission distance: 5 m max. USB 1.1 TYPE-B, Transmission distance: 5 m max. NV-Designer version 2.0 or higher (NV-Designer can be upgraded to version 2.0 by using the CX-One Auto-update.) NV-Designer version 1.0 or higher (Included with CX-One version 3.2 or in CX-One Lite version 4.0.) Applicable Support Software NV-Designer version 1.1 or higher (Included with CX-One version 4.03 or in CX-One Lite version 4.03.) *1. This is the estimated time before brightness is reduced by half at room temperature and humidity. It is not a guaranteed value. *2. The estimate applies to operation when only custom switches are placed on the screen. *3. This value does not include 1-dot box of frame line. *4. The capacity of the SD memory card is 32 MB to 1 GB for PT system program version 1.0@. *5. SD memory cards are shipped pre-formatted from the factory, so there is normally no need to format them. If an SD memory card is formatted with the standard formatting utility provided with a personal computer, its file system will not conform to the SD memory card standard. Always use the formatting software provided by SD memory card makers. *6. The display device of NV3Q-MR@1 of the Lot No. 160430 or earlier is STN, and the Lot No. 160501 or later is TFT. *7. The display device of NV3Q-SW@1 of the Lot No. 110999 or earlier is STN, and the Lot No. 111000 or later is TFT. *8. The display device of NV3W-MG@@(L)-V1/MR@@(L)-V1 of the Lot No. 161231 or earlier is STN, and the Lot No. 170101 or later is TFT. *9. The display device of NV4W-M@21/M@41 of the Lot No. 170221 or earlier is STN, and the Lot No. 170222 or later is TFT. 10 NV-series Applicable PLCs Company Series Company Series OMRON CP Series Mitsubishi Electric FX Series OMRON CJ Series Mitsubishi Electric Q Series OMRON CS Series Mitsubishi Electric A Series OMRON C Series Panasonic Electric Works FP Series OMRON CVM1/CV Series Toshiba Machine TC mini Series OMRON Temperature Controllers EJ1 Series Keyence KV Series, KV Nano Series Yokogawa Electric FA-M3 Series Allen-Bradley Models that support DF protocol MicroLogix Hitachi EH-150EHV Series Allen-Bradley Models that support DF protocol SLC-500 Series Hitachi EH150 Series Siemens S7-200 Series Hitachi MICRO-EH Series LG MASTER-K Series Hitachi Web Controller Modbus Models that support RTU protocol Note: Refer to "NV Series Programmable Terminals Host Connection Manual (Cat.No V105)" which is included in NV-Designer for information on combination use with each PLC Series. Dimensions (Unit: mm) NV3W-V1 NV4W 103 4 23 10.55 60.5 0.6 146 4 26 13 13 40.6 Panel Cutout Dimentions 139 +1 0 70 Panel Cutout Dimentions +1 0 67.0 86 66 37.5 112 105.0 41.8 (display screen) 74 65 85 74 3.5 109.8 (display screen) Applicable panel thickness : 1.6 mm to 4.8 mm +1 0 67 +1 0 Applicable panel thickness : 1.6 mm to 4.8 mm 5.2 With connector mounted 3.9 NV3Q 4.0 29.8 84.2 107.4 52.9 (display screen) 92.2 7.6 (1.0 for Packing) 70.6 (display screen) 110.0 65.0 Panel Cutout Dimentions 99.2 +1 0 85.2 +1 0 Applicable panel thickness : 1.6 mm to 4.8 mm Related Manuals Cat. No V103 Model NV3W-V1, NV4W, NV3Q Name NV Series Programmable Terminals Setup Manual V104 NV3W-V1, NV4W, NV3Q, NV-Designer NV Series Programmable Terminals Programmig Manual V105 NV3W-V1, NV4W, NV3Q NV Series Programmable Terminals Host Connection Manual 11 Read and Understand this Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. LIMITATIONS OF LIABILITY OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Application Considerations SUITABILITY FOR USE Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Disclaimers PERFORMANCE DATA Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. ERRORS AND OMISSIONS Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. Note: Do not use this document to operate the Unit. OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, 2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC 2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2009-2020 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. CSM_7_10 Cat. No. V410-E1-05 0820(0609)