PFC-N8

Limit Switch Connectors CSM_LimitSwitch_Connector_DS_E_2_1 Connectors (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness of the edges of the conduits, use an SC Connector that is suitable for the external diameter of cable and model of Limit Switch. Ordering Information Connector for Cabtire Cable Conduit Applicable cable Cabtire cable (generalpurpose) JIS B 0202 G½ Cabtire cable (anticorrosive) ½-14NPT Cabtire cable Inner diameter (D) of seal rubber 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm External diameter of cable Min. Max. 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm Model SC-1M SC-2M SC-3M SC-4M SC-5M SC-21 SC-22 SC-23 SC-24 SC-25 SC-1PT SC-2PT SC-3PT SC-4PT SC-5PT Applicable model WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 D4A-@N Note: 1. Use SC-21 to SC-25 together with the rubber ring and conduit washer for the SC-P2. 2. It is necessary to use sealing tape with SC Connectors. SC-1M to SC-5M, however, are provided with an O-ring (NBR) and therefore sealing tape is not necessary to ensure a proper seal. Simple Connector Conduit Applicable cable JIS B 0202 G½ Pg13.5 JIS B 0202 G½ Cabtire cable Inner diameter (D) of seal rubber External diameter of cable Min. Max. Model 10.6 mm 8.5 mm 10.5 mm SC-P2 9.6 mm 7.5 mm 9.5 mm SC-P3 9 mm 7.5 mm 9 mm SC-6 Applicable model WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 WL@-G, D4B-@N WL, D4A-@N, D4N *, D4N-@R *, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 Note: The casings for SC-P2, -P3 and -6 are made of resin. If more sealing capability is required, use one of SC-1M to SC-5M, which have metal casings. Models marked with an asterisk (*) however, can only be used with resin connectors. 1 Limit Switch Connectors Dimensions and Structure (Unit: mm) Connectors for Cabtire Cable SC-P2 accessories and sealing tape must be used together with models without an O-ring in order to prevent ingress of oil or water. Follow the instructions given under Conduits on page 4. Metal Models without O-ring G½ SC-21 to 25 JIS B 0202 G½ 14.6 dia. *E 4.8 15 9 24 14 dia. 27.7 29.3 Ball head lock nut (brass and plating) Washer (stainless steel) Sealing rubber (nitrile rubber) Connector (brass and plating) *D (34) Metal Models with O-ring G½ SC-1M to 5M 14.6 dia. *E 15 5 JIS B 0202 G½ 9 29.3 27 14 dia. 30 Ball head lock nut (ferrous metal and plating) Washer (stainless steel) *D (34) Metal Models without O-ring ½-14NPT (U.S.-standard screws) SC-1PT to 5PT 14.6 dia. 14 dia. Sealing rubber (nitrile rubber) 5 15 Sealing rubber (nitrile rubber) Connector (zinc die-cast and plating) 14 29.3 ½-14NPT 24 14 dia. 27.7 Ball head lock nut (ferrous metal and plating) Sealing rubber (nitrile rubber) Washer (stainless steel) Connector (brass and plating) *D (39) Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm. Simple Connectors (Not Suitable for Locations Subject to Oil or Water) Resin Models G½ SC-P2 JIS B 0202 1 G½ 15 22 5 18 dia. 12.6 dia. 25.4 Resin Models Pg13.5 SC-P3 15.5 5 21 18 dia. 12 dia. 23.5 Resin Models G½ SC-6 Pg13.5 1 Conduit washer (ferrous metal) Ring (chloroprene rubber) 4.5 Hexagonal nut (polyacetal resin) Conduit washer (ferrous metal) Ring (chloroprene rubber) 18 dia. 9.6 dia. 22.5 12 9 12 5 Hexagonal nut (polyacetal resin) 18 dia. 10.6 dia. (30.6) 10 9 4.5 9 Ball head lock nut (chloroprene rubber) Washer (stainless steel) Sealing rubber (nitrile rubber) Connector (polyacetal resin) *D 26 G½ M20 × 1.5 Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm. * Diameter of Part Marked with Asterisk Model SC-21, -1M, -1PT SC-22, -2M, -2PT SC-23, -3M, -3PT SC-24, -4M, 4PT SC-25, -5M, -5PT SC-6 Inner diameter (D) of sealed rubber 7 mm 9 mm 12.5 mm 14 mm 11 mm 9 mm Internal diameter (E) of washer 10.4 mm 13.2 mm 14.6 mm 14.6 mm 13.2 mm 10 mm Applicable cable 5.5 to 7.5-mm dia. 7.5 to 9.5-mm dia. 11 to 13-mm dia. 12 to 14-mm dia. 9 to 11-mm dia. 7.5 to 9-mm dia. 2 Limit Switch Connectors SC-@F@ FA Connectors The SC-@F@ is a snap-on connecting model that greatly reduces the time-consuming effort for wiring the Limit Switch. The SC-@F@ is easily and quickly connected or disconnected and its degree of protection is IP67. Ordering Information FA Connector limit Switch FA Connector Connecting Cable Crimp terminal + + Number of conductors 2 2 4 4 Voltage Size of specification conduit 125 VDC 250 VAC JIS B 0202 G½ 125 VDC 250 VAC FA Connectors Model SC-2F SC-2FAD SC-4F4D SC-4F4AD Size of crimp terminal Applicable model M4 WL Connecting Cables Straight Cable Voltage specification Number of conductors 2 AC 4 2 DC 4 Cable length 2m 5m 2m 5m 2m 5m 2m 5m Model XS2F-A421-DB0-A XS2F-A421-GB0-A XS2F-A421-D90-A XS2F-A421-G90-A XS2F-D421-DD0 XS2F-D421-GD0 XS2F-D421-D80-A XS2F-D421-G80-A Connections to Sensor I/O Connectors Voltage specification Number of conductors FA Connector Sensor I/O Connector Connection SC-2FAD XS2F-A421-@B0-A ↑ D: 2-m cord G: 5-m cord Brown Blue Brown Blue 4 SC-4F4AD XS2F-A421-@90-A ↑ D: 2-m cord G: 5-m cord Red Brown Black White Brown White Blue Black 2 SC-2F XS2F-D421-@D0 ↑ D: 2-m cord G: 5-m cord Brown Blue Blue Brown SC-4F4D XS2F-D421-@80-A ↑ D: 2-m cord G: 5-m cord Red Brown Black White Brown White Blue Black 2 AC DC 4 3 Limit Switch Connectors Dimensions (Unit: mm) SC-2F 8.5 4 10 27 Built-in DC connector JIS B0202 G½ Brown (3) M4 crimp terminal 1 4 2 . 30 SC-2FAD dia 3 Blue (4) M12 × 1 61 ±5 8.5 27 4 10 Built-in AC connector JIS B0202 G½ Brown (3) M4 crimp terminal 1 4 2 . 30 SC-4F4AD dia Blue (4) M12 × 1 3 61 ±5 8.5 27 4 10 Built-in AC connector JIS B0202 G½ Brown (1) Blue (3) M4 crimp terminal 1 4 2 30 SC-4F4D . dia Black (4) M12 × 1 8.5 27 3 White (2) 46 ±5 61 ±5 4 10 Built-in DC connector JIS B0202 G½ Red (1) Black (3) M4 crimp terminal 1 4 2 . 30 dia White (4) Brown (2) M12 × 1 3 46 ±5 56 ±5 Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified. 2. Figures in parentheses are connector pin numbers. Safety Precautions Precautions for Correct Use Conduits Connector for Cabtire Cable/Flexible Tube G½, ½-14NPT To connect a Limit Switch with a connector, insert a rubber ring first and then a washer into the conduit inlet of the switch body, put a rubber seal, washer, and nut in this order onto the tapered part of the connector and tighten the nut securely. Then tighten the conduit inlet with the connector to maintain high sealing capability. Apply sealing tape to the edge of the connector on the conduit inlet side to increase sealing capability. The SC-1M to SC-5M are provided with an O-ring, and so the rubber ring, conduit washer, and sealing tape are not required. SC-P2 Cover Rubber ring Washer for conduit Cabtire cable Connector Rubber seal Washer Ball head lock nut Switch box Conduit inlet JIS B0202 G½ ½-14NPT SC-21 to 25 SC-1M to 5M SC-1PT to 5PT 4 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: SC-R40