S8VK-S03024

Switch Mode Power Supply 30 W S8VK-S Series A Perfect Fit for Small Control Panels Coated PCBs for Better Resistance to Environment Connections for Easy Wiring • Operation possible at ambient temperatures from -40 to 70°C. • Side-by-side mounting possible (up to 55°C). • Power Boost function at 120%. Our shared Value Design for Panel (herein after referred to as Value Design) concept for the specifications of products used in control panels will create new value to our customer's control panels. Combining multiple products that share the Value Design concept will further increase the value provided to control panels. Specifications Ratings, Characteristics, and Functions Power rating Item Efficiency 87% typ. 230 VAC input *1 86% typ. Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second) Frequency *2 0.58A typ. 230 VAC input *1 0.36A typ. Leakage current *3 115 VAC input 0.5 mA max. 230 VAC input 1 mA max. Inrush current (for a cold start at 25°C) 115 VAC input 16 A typ. Power factor --- 230 VAC input 32 A typ. Rated output current 1.3 A Rated output electric power 31.2 W Maximum boost current 1.56 A Voltage adjustment range *4 Start up time Hold time *5 Additional functions 50/60 Hz (47 to 450 Hz) 115 VAC input *1 Input current Output 24 V 115 VAC input *1 Voltage range *2 Input 30 W Output voltage 21.6 to 28 V (with V.ADJ) 115 VAC input *1 1000 ms max. 230 VAC input *1 1000 ms max. 115 VAC input *1 30 ms typ. 230 VAC input *1 140 ms typ. Overload protection Yes, automatic reset Overvoltage protection Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again) Output indicator Yes (LED: Green) Low-voltage detection output No 3.0 kVAC for 1 min. (between all input terminals and output terminals), current cutoff 10 mA Insulation Environment Withstand voltage 2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 10 mA 1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 20 mA Insulation resistance 100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC Vibration resistance 10 to 55 Hz, maximum 5G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions Shock resistance 150 m/s2, 3 times each in ±X, ±Y, ±Z directions Construction Weight 250 g max. *1. The value is when both rated output voltage and rated output current are satisfied. *2. Do not use an inverter output for the product. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the product may result in ignition or burning. If the input is connected to a UPS, do not connect a UPS with a square-wave output. Doing so will cause the internal temperature of the product to increase, possibly causing smoking or burning. *3. The value for the leakage current is determined according to the Electrical Appliances and Material Safety Act. *4. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than 28 V min of the voltage adjustment range. When adjusting the output voltage, confirm the actual output voltage from the product and be sure that the load is not damaged. *5. A characteristic when the ambient operating temperature of 25°C. For details, refer to the website. (http://www.ia.omron.com/) 1 S8VK-S03024 30 W (S8VK-S03024) Horizontal separation: 15 mm or more 30 W (S8VK-S03024) Horizontal separation: Less than 15 mm Load ratio (%) Load ratio (%) Engineering Data 120 (A) Standard (Vertical) mounting 100 A 75% 80 (C) Front, Side-by-side mounting 120 100 C 80 B 50% 60 60 (B) Face-up mounting 40 40 20 0 −40 20 −25 0 −40 −25 −10 0 10 20 30 40 50 60 70 80 −10 0 10 20 30 40 50 60 70 80 Operating temperature (°C) Operating temperature (°C) Note: 1. At less than 90 VAC, derate the load at 2.5%/V. 2. For a DC input, reduce the load given in the above derating curve by multiplying by the following coefficients. S8VK-S03024: 0.9 3. In the shaded area, time is required to reach the rated output voltage after the input voltage is applied. Construction and Nomenclature Note: 1. Apply the rated voltage 2. In the shaded area, time is required to reach the rated output voltage after the input voltage is applied. Dimensions (Unit: mm) 90 ±1 DC Output terminals (1.2) 5.4 + 86 Output indicator (DC ON: Green) Output voltage adjuster (V.ADJ) L Input terminals 78.55 90 ±1 N Protective Earth terminal (PE) Rail Stopper 5.4 32 ±1 4.7 (Sliding: 10 max.) 3.5 2 S8VK-S03024 Standards Harmonic current emissions EMI Conforms to EN 61000-3-2 Conducted Emissions Conforms to EN 61204-3 Class B, EN 55011 Class B Radiated Emissions Conforms to EN 61204-3 Class B, EN 55011 Class B EMS Conforms to EN 61204-3 high severity levels Approved Standards UL Listing: UL 508 cUL: CSA C22.2 No107.1, CSA C22.2 No213 UL UR: UL 60950-1 (Recognition) OVCII (≤ 3000 m) Pol2 cUR: CSA C22.2 No.60950-1 OVCII (≤ 3000 m) Pol2 EN: EN 50178 OVCIII (≤ 2000 m) OVCII (2000 m≤ and≤3000) Pol2, EN 60950-1 OVCII (≤ 3000 m) Pol2 PELV (EN/IEC 60204-1) * Conformed Standards EN/IEC 61558-2-16:2009+A1:2013 * SEMI Conforms to F47-0706 (200 to 240 VAC input) * Refer to Standard Compliance, below. Model Number Structure S8VK- S@@@@@ 1 2 2. Output voltage 24: 24 V 1. Power Ratings 030: 30 W 060: 60 W 120: 120 W 240: 240 W 480: 480 W Power ratings Rated input voltage 60 W 120 W 240 W Rated output voltage 24 V 30 W 100 to 240 VAC (allowable range: 85 to 264 VAC or 90 to 350 VDC) 480 W Rated output current 1.3 A Model number S8VK-S03024 24 V 2.5 A 3A S8VK-S06024 24 V 5A 6A S8VK-S12024 24 V 10 A 15 A S8VK-S24024 24 V 20 A 30 A S8VK-S48024 Safety Precautions Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/. 3 Maximum boost current 1.56 A OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com OMRON ARGENTINA • SALES OFFICE Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com OMRON CHILE • SALES OFFICE Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Controllers & I/O • Machine Automation Controllers (MAC) • Motion Controllers • Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O Authorized Distributor: Robotics • Industrial Robots • Mobile Robots Operator Interfaces • Human Machine Interface (HMI) Motion & Drives • Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems • Frequency Inverters Vision, Measurement & Identification • Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems Sensing • Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors • Rotary Encoders • Ultrasonic Sensors Safety • Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems • Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices • Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays Control Components • Power Supplies • Timers • Counters • Programmable Relays • Digital Panel Meters • Monitoring Products Switches & Relays • Limit Switches • Pushbutton Switches • Electromechanical Relays • Solid State Relays Software • Programming & Configuration • Runtime T221I-E3-01 Note: Specifications are subject to change. © 2019 Omron. All Rights Reserved. Printed on recycled paper. Printed in U.S.A.