SC-2F

Limit Switch Connectors CSM_LimitSwitch_Connector_DS_E_6_2 Connectors (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness of the edges of the conduits, use an SC Connector that is suitable for the external diameter of cable and model of Limit Switch. Ordering Information Connector for Cabtire Cable Conduit Applicable cable Cabtire cable (generalpurpose) JIS B 0202 G½ Cabtire cable (anticorrosive) ½-14NPT Cabtire cable Inner diameter (D) of seal rubber 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm External diameter of cable Min. Max. 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm Model SC-1M SC-2M SC-3M SC-4M SC-5M SC-21 SC-22 SC-23 SC-24 SC-25 SC-1PT SC-2PT SC-3PT SC-4PT SC-5PT Applicable model WL-N, WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 D4A-@N Note: Please use sealling tape with SC Connectors. SC-1M to SC-5M, however, are provided with an O-ring (NBR) and therefore sealing tape is not necessary to ensure a proper seal. Simple Connectors (Not Suitable for Locations Subject to Oil or Water) Conduit Applicable cable JIS B 0202 G½ Pg13.5 JIS B 0202 G½ Cabtire cable Inner diameter (D) of seal rubber External diameter of cable Min. Max. Model 10.6 mm 8.5 mm 10.5 mm SC-P2 9.6 mm 7.5 mm 9.5 mm SC-P3 9 mm 7.5 mm 9 mm SC-6 Applicable model WL-N, WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 WL@-G WL-N, WL, D4A-@N, D4N *, D4N-@R *, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2 Note: Simple connector are made of resin. If more sealing capability is required, use one of SC-1M to SC-5M, which have metal casings. Models marked with an asterisk (*) however, can only be used with resin connectors. 1 Limit Switch Connectors Dimensions and Structure (Unit: mm) Connectors for Cabtire Cable As for models without an O-ring, please use sealing tape with SC Connectors. Metal Models without O-ring G½ SC-21 to 25 JIS B 0202 G½ 14.6 dia. *E 15 4.8 9 24 14 dia. 27.7 29.3 Ball head lock nut (brass and nickel plating) Washer (stainless steel) Sealing rubber (nitrile rubber) Connector (brass and nickel plating) *D (34) Metal Models with O-ring G½ SC-1M to 5M 14.6 dia. *E 15 JIS B 0202 G½ 5 9 29.3 27 14 dia. Ball head lock nut (zinc die-cast and zinc plating) Washer (stainless steel) *D 30 Sealing rubber (nitrile rubber) (34) Metal Models without O-ring ½-14NPT (U.S.-standard screws) SC-1PT to 5PT 14.6 dia. 14 dia. 15 Sealing rubber (nitrile rubber) Connector (zinc die-cast and zinc plating) 5 14 29.3 ½-14NPT 24 14 dia. Ball head lock nut (zinc die-cast and zinc plating) Washer (stainless steel) Sealing rubber (nitrile rubber) Connector (zinc die-cast and zinc plating) *D 27.7 (39) Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm. Simple Connectors (Not Suitable for Locations Subject to Oil or Water) Resin Models G½ SC-P2 15 22 5 18 dia. 12.6 dia. 25.4 Resin Models Pg13.5 SC-P3 15.5 5 21 Pg13.5 Hexagonal nut (polyacetal resin) 4.5 Hexagonal nut (polyacetal resin) Conduit washer (ferrous metal and zinc plating) Ring (chloroprene rubber) 18 dia. 10.6 dia. 1 Conduit washer (ferrous metal and zinc plating) 18 dia. 9.6 dia. 22.5 12 9 (30.6) 10 9 4.5 Ring (chloroprene rubber) 18 dia. 12 dia. 23.5 Resin Models G½ SC-6 JIS B 0202 1 G½ 12 5 9 Ball head lock nut (polyacetal resin) Washer (ferrous metal and zinc plating) Sealing rubber (nitrile rubber) Connector (polyacetal resin) *D 26 G½ M20 × 1.5 Note: Dimensions not shown in the above diagrams have a variation of ±0.4 mm. * Diameter of Part Marked with Asterisk Model SC-21, -1M, -1PT SC-22, -2M, -2PT SC-23, -3M, -3PT SC-24, -4M, 4PT SC-25, -5M, -5PT SC-6 Inner diameter (D) of sealed rubber 7 mm 9 mm 12.5 mm 14 mm 11 mm 9 mm Internal diameter (E) of washer 10.4 mm 13.2 mm 14.6 mm 14.6 mm 13.2 mm 10 mm Applicable cable 5.5 to 7.5-mm dia. 7.5 to 9.5-mm dia. 11 to 13-mm dia. 12 to 14-mm dia. 9 to 11-mm dia. 7.5 to 9-mm dia. 2 Limit Switch Connectors SC-@F@ FA Connectors The SC-@F@ is a snap-on connecting model that greatly reduces the time-consuming effort for wiring the Limit Switch. The SC-@F@ is easily and quickly connected or disconnected and its degree of protection is IP67. Ordering Information FA Connector limit Switch FA Connector Connecting Cable Crimp terminal + + Number of conductors 2 2 4 4 Voltage Size of specification conduit 125 VDC 250 VAC JIS B 0202 G½ 125 VDC 250 VAC FA Connectors Model SC-2F SC-2FAD SC-4F4D SC-4F4AD Size of crimp terminal Applicable model M4 WL Connecting Cables Straight Cable Voltage specification Number of conductors 2 AC 4 2 DC 4 Cable length 2m 5m 2m 5m 2m 5m 2m 5m Model XS2F-A421-DB0-F XS2F-A421-GB0-F XS2F-A421-D90-F XS2F-A421-G90-F XS2F-D421-DD0 XS2F-D421-GD0 XS2F-D421-D80-F XS2F-D421-G80-F Connections to Sensor I/O Connectors Voltage specification Number of conductors FA Connector Sensor I/O Connector Connection SC-2FAD XS2F-A421-@B0-F ↑ D: 2-m cord G: 5-m cord Brown Blue Brown Blue 4 SC-4F4AD XS2F-A421-@90-F ↑ D: 2-m cord G: 5-m cord Brown White Blue Black Brown White Blue Black 2 SC-2F XS2F-D421-@D0 ↑ D: 2-m cord G: 5-m cord Brown Blue Blue Brown SC-4F4D XS2F-D421-@80-F ↑ D: 2-m cord G: 5-m cord Red Brown Black White Brown White Blue Black 2 AC DC 4 3 Limit Switch Connectors Dimensions (Unit: mm) SC-2F 8.5 4 10 27 Built-in DC connector JIS B0202 G½ Brown (3) M4 crimp terminal 1 4 2 . 30 SC-2FAD dia 3 Blue (4) M12 × 1 61 ±5 8.5 27 4 10 Built-in AC connector JIS B0202 G½ Brown (3) M4 crimp terminal 1 4 2 . 30 SC-4F4AD dia Blue (4) M12 × 1 3 61 ±5 8.5 27 4 10 Built-in AC connector JIS B0202 G½ Brown (1) Blue (3) M4 crimp terminal 1 4 2 30 SC-4F4D . dia Black (4) M12 × 1 8.5 27 3 White (2) 46 ±5 61 ±5 4 10 Built-in DC connector JIS B0202 G½ Red (1) Black (3) M4 crimp terminal 1 4 2 . 30 dia White (4) Brown (2) M12 × 1 3 46 ±5 56 ±5 Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified. 2. Figures in parentheses are connector pin numbers. Safety Precautions Precautions for Correct Use Conduits Connector for Cabtire Cable/Flexible Tube G½, ½-14NPT To connect a Limit Switch with a connector, insert a rubber ring first and then a washer into the conduit inlet of the switch body, put a rubber seal, washer, and nut in this order onto the tapered part of the connector and tighten the nut securely. Then tighten the conduit inlet with the connector to maintain high sealing capability. Apply sealing tape to the edge of the connector on the conduit inlet side to increase sealing capability. The SC-1M to SC-5M are provided with an O-ring, and so the rubber ring, conduit washer, and sealing tape are not required. SC-P2 Cover Rubber ring Washer for conduit Cabtire cable Connector Rubber seal Washer Ball head lock nut Switch box Conduit inlet JIS B0202 G½ ½-14NPT SC-21 to 25 SC-1M to 5M SC-1PT to 5PT 4 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.8 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: SC-2F SC-4F4D