SS-01GL13-ET

Snap Action Switch SS Subminiature Snap Action Switch • Economical, subminiature snap action switch offers long service life (30 million operations minimum) • All models are free from overtravel restrictions, permit easy setting • Wide switching capacity range from microvoltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250 VAC) • Standard operating force, low force or super-low force models available • RoHS Compliant Ordering Information Rating 0.1 A Actuator Pin plunger Contact OF 25 g 50 g 150 g Hinge lever 8g 16 g 50 g Simulated roller lever Hinged roller lever 5A Pin plunger Hinge lever Simulated roller lever Hinge roller lever 10 A Pin plunger 150 g Hinge lever Simulated roller lever Hinge roller lever 50 g SS-10D SS-10GLD — — — — SS-10 SS-10GL SS-10T SS-10GLT 8g 16 g 50 g 8g 16 g 50 g 50 g 150 g 16 g 50 g 16 g 50 g 16 g 50 g PCB terminal Straight SS-01-ED SS-01-FD SS-01D SS-01GL-ED SS-01GL-FD SS-01GLD SS-01GL13-ED SS-01GL13-FD SS-01GL13D SS-01GL2-ED SS-01GL2-FD SS-01GL2D SS-5-FD SS-5D SS-5GL-FD SS-5GLD SS-5GL13-FD SS-5GL13D SS-5GL2-FD SS-5GL2D Left-angled — — SS-01D1 — — SS-01GLD1 — — — — — — SS-5-FD1 SS-5D1 SS-5GL-FD1 SS-5GLD1 — SS-5GL13D1 SS-5GL2-FD1 SS-5GL2D1 Right-angled — — SS-01D2 — — SS-01GLD2 — — — — — — SS-5-FD2 SS-5D2 SS-5GL-FD2 SS-5GLD2 SS-5GL13-FD2 SS-5GL13D2 SS-5GL2-FD2 SS-5GL2D2 Soldered terminal SS-01-E SS-01-F SS-01 SS-01GL-E SS-01GL-F SS-01GL SS-01GL13-E SS-01GL13-F SS-01GL13 SS-01GL2-E SS-01GL2-F SS-01GL2 SS-5-F SS-5 SS-5GL-F SS-5GL SS-5GL13-F SS-5GL13 SS-5GL2-F SS-5GL2 Tab (#110) terminal SS-01-ET SS-01-FT SS-01T SS-01GL-ET SS-01GL-FT SS-01GLT SS-01GL13-ET SS-01GL13-FT SS-01GL13T SS-01GL2-ET SS-01GL2-FT SS-01GL2T SS-5-FT SS-5T SS-5GL-FT SS-5GLT SS-5GL13-FT SS-5GL13T SS-5GL2-FT SS-5GL2T 50 g SS-10GL13D — — SS-10GL13 SS-10GL13T 50 g SS-10GL2D — — SS-10GL2 SS-10GL2T Snap Action Switch SS 95 Model Number Legend SS12345 1. Ratings 10: 10.1 A at 125 VAC 5: 5 A at 125 VAC 01: 0.1 A at 30 VDC Actuator None: Pin plunger GL: Hinge lever GL13: Simulated roller lever GL2: Hinge roller lever 3. Maximum Operating Force (see note) None: 150 gf -F: 50 gf (0.1A and 5A versions) -E: 25 gf (0.1A versions) Contact Form None: SPDT -2: SPST-NC -3: SPST-NO 5. Terminals None: Solder terminals T: Quick-connect terminals (#110) D: Straight PCB terminals D1: Left-angled PCB terminals D2: Right-angled PCB terminals 2. 4. Note: These OF values are for the pin plunger models. Consult Omron regarding the following: - SPST-NC and SPST-NO versions - High temperature versions that are rated from -25°C to 120°C - Left and Right angled PCB terminal versions Specifications ■ Characteristics Operating speed Operating frequency Insulation resistance Contact resistance 0.1 mm to 1 m/second (pin plunger models) Mechanical: 400 operations per minute max. Electrical: 30 operations per minute max. 100 MΩ at 500 VDC 150 gf: 50 gf: 25 gf: Dielectric strength (See note 2) SS-10, SS-5 models: SS-01 models: SS-5 models: SS-01 models SS-01 models 30 mΩ max. 50 mΩ max. 50 mΩ max. 100 mΩ max. 150 mΩ max. 1,000 VAC (600 VAC for SS-01), 50/60 Hz for 1 minute between terminals of same polarity 1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground and between each terminal and noncurrent-carrying metal parts Malfunction: 10 to 55 Hz, 1.5 mm double amplitude 150 gf: 50 gf and 25gf: Destruction: 1,000 m/s2 (approx. 100G) max. Malfunction: 300 m/s2 (approx. 30G) max. Destruction: 500 m/s2 (approx. 50G) max. Malfunction: 200 m/s2 (approx. 20G) max. Vibration resistance (see note 3) Shock resistance (see note 3) Degree of protection Degree of protection against electric shock Proof tracking index (PTI) Ambient operating temperature Ambient operating humidity Service life IEC IP40 Class I 175 -25° to 85°C (at 60% RH max.) with no icing 85% max. (for 5°C to 35°C) Mechanical: Electrical: 30 million operations min. at 60 operations per minute (SS-01, SS-5) 10 million operations min. at 60 operations per minute (SS-10) 200,000 operations min. at 30 operations per minute (SS-01, SS-5) 50,000 operations min. at 30 operations per minute (SS-10) Weight Approx. 1.6 g pin plunger type Note: 1. Data shown are of initial value. 2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate. 3. For pin plunger models, the above value apply for use at the free position and total travel position. For the lever models, the values apply at the total travel position. 96 Snap Action Switch SS ■ Ratings (reference values) Switch series: Resistive load Contact form 125 VAC 250 VAC 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC NC NO 5 A (10.1A) 3 A (10.1A) 5 A (10.1A) 5 A (10.1A) 4A 0.4 A 0.2 A NC 1.5 A 1A 2A 2A 2A 0.05 A 0.03 A SS-10 and SS-5 Lamp load NO 0.7 A 0.5 A 5A 4A 3A 0.4 A 0.2 A Inductive load NC 3A 2A 4A NO Motor load NC 2.5 A 1.5 A 3A 3A 3A 0.05 A 0.03 A NO 1.3 A 0.8 A NC 0.1 A --0.1 A 0.1 A 0.1 A ----SS-01 Resistive Load NO Note: 1. Data in parentheses apply to the SS-10 models only. 2. The above current ratings are the values of the steady-state current. 3. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). The inductive load rating of the SS-10 is the same as that of SS-5. 4. Lamp load has an inrush current of 10 times the steady-state current 5. Motor load has an inrush current of 6 times the steady-state current. 6. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch. 7. The electrical rating applies under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute ■ Approved Standards UL Recognized (File No. E41515) CSA Certified (File No. LR21642) Rated Voltage 125 VAC 250 VAC 30 VDC SS-10 --10.1 A --SS-5 5A 3A --SS-01 0.1 A --0.1 A ■ Contact Specifications Item SS-10 SS-5 SS-01 Specification Rivet Crossbar Material Silver alloy Silver Gold alloy Gap (standard value) 0.5 mm 0.25 mm Inrush current NC: 20A max. NC: 20A max. 1A max. NO: 15A max. NO: 10A max. Minimum applicable 160 mA at 5 VDC 1 mA at 5 VDC load (see note) Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60% (λ60) reliability level (JIS C5003). The equation λ60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% EN61058-1 - - VDE approval (File No. 129246 for SS-5, 125256 for SS-10) Rated Voltage 250 VAC SS-10 10.1 A SS-5 5A EN61058-1 - - TÜV Rheinland approval (File No. J9451450) Rated Voltage 250 VAC SS-10 10.1 A SS-5 5A Testing conditions: 5E4 (50,000 operations), T85 (0°C to 85°C) Note: The rated values approved by each of the safety standards (e.g. UL, CSA) may be different from the performance characteristics individually defined in this catalog. Snap Action Switch SS 97 Engineering Data ■ Mechanical Service Life SS-01, SS-5 Models (Pin Plunger Models) Number of operations (x10 3) Ambient temperature: 20±2°C Ambient humidity: 65±5% Without load Operating frequency: 60 operations/min ■ Electrical Service Life SS-5 Models (Pin Plunger Models) 5,000 Ambient temperature: 20±2°C Ambient humidity: 65±5% Operating frequency: 30 operations/min cosφ = 1 Number of operations (x10 3) 40,000 3,000 30,000 1,000 500 300 100 50 30 10 250 VAC 125 VAC 20,000 10,000 5,000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 4 5 6 7 Overtravel (mm) Switching current (A) ■ Mounting Panel Mounting All switches may be panel mounted using M2.3 mounting screws with plane washers or spring washers to securely mount the switch. Tighten the screws to a torque of 0.23 to 0.26 N·m. Two, 2.4-dia. mounting holes or M2.3 screw holes ■ Contact Form SPDT SPST-NC SPST-NO COM NO NC COM NC COM NO 9.5 ± 0.1 * Consult Omron for SPST-NC and SPST-NO contact form types ordering information. PCB Layout Three, 1.35 to 1.5 dia. (1.6) 8.8 –0.05 +0.15 16.1±0.1 98 Snap Action Switch SS Dimensions ■ Terminals Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions 2. Terminal plate thickness is 0.5 mm for all models. Solder Terminals Quick-connect Terminals (#110) PCB Terminals 2.9 3.2 8.8 COM terminal (C) 9.5±0.1 19.8 NO terminal NC terminal 7.3 6.4 6.4 2.9 7.1 10.6 2.9 1.6 8.8 COM terminal (C) 9.5±0.1 19.8 NO terminal 7.3 3.3 0.5 0.6 7.0 1.6 1.6 Three, 1.6-dia. holes COM terminal (C) 8.8 9.5±0.1 19.8 NO terminal NC terminal 7.3 3.2 2.8 Three, 1.2 dia. 1.2 3.2 t = 0.5 NC terminal Note: Terminal plate thickness is 0.5 mm for all models. PCB, Left-angled terminal PCB, Right-angled terminal Note: Angled terminal directions are shown below. Left-angled terminal Right-angled terminal COM terminal NC terminal NO terminal COM terminal NC terminal NO terminal ■ Dimensions and Operating Characteristics Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions 2. The following illustrations and dimensions are for solder terminal models. Refer to “Terminals” for models with quick-connect terminals (#110) or PCB terminals. 3. The operating characteristics are for operation in the A direction( ) Pin Plunger Models SS-01(-E, -F) SS-5(-F) SS-10 6.4 PT 2 7.5 3.2 A OP 2.9 2.35 –0.05 2.5 +0.075 9.5 10.2 6.4 2.35 +0.075 dia. holes –0.05 8.8 7.3 5.1 9.5±0.1 19.8 3.2 6.4 Three, 1.6 dia. 2.5±0.07 dia. 1.6 Characteristics OF max. RF min. PT max. OT min. MD max. OP SS-01-E 25 g 2g 0.5 mm 0.5 mm 0.1 mm Part number SS-01-F, SS-5-F SS-01, SS-5 50 g 150 g 4g 25 g 0.5 m 0.5 mm 0.5 mm 0.5 mm 0.1 mm 0.1 mm 8.4 ± 0.5 mm SS-10 150 g 25 g 0.6 mm 0.4 mm 0.12 mm Snap Action Switch SS 99 Hinge Lever Models SS-01GL(-E, -F) SS-5GL(-F) SS-10GL 2.9 t = 0.3 (see note 1) 2.35 –0.05 2.5 2.5±0.07 dia. 1.6 +0.075 14.5 (see note 2) A 3.6 OP 9.5 10.2 FP 6.4 2.35 –0.05 dia. holes 8.8 7.3 5.1 9.5±0.1 19.8 +0.075 3.2 6.4 Three, 1.6 dia. Note: 1. Stainless-steel lever 2. Besides the SS- GL models with a hinge lever length of 14.5, the SS- GL11 models with a hinge lever length of 18.5, the SS- GL111 models with a hinge lever length of 22.6, and the SS- GL1111 models with a hinge lever length of 37.8 are available. Contact your OMRON representative for these models Characteristics OF max. RF min. OT min. MD max. FP max. OP SS-01GL-E 8g 1g 1.2 mm 0.8 mm SS-01GL-F, SS-5GL-F SS-01GL, SS-5GL 16 g 50 g 2g 6g 1.2 mm 1.2 mm 0.8 mm 0.8 mm 13.6 mm 8.8 ± 0.8 mm SS-10GL 50 g 6g 1.0 mm 1.0 mm Simulated Roller Lever Models SS-01GL13(-E, -F) SS-5GL13(-F) SS-10GL13 2.9 2.5 2.5±0.07 dia. 1.6 8.8 t = 0.3 (see note) 15.8 A 1.3R 3.6 2.35 –0.05 +0.075 OP 9.5 10.2 FP 6.4 2.35 +0.075 –0.05 7.3 Note: 5.1 9.5±0.1 19.8 dia. holes Three, 1.6 dia. 3.2 6.4 Stainless-steel spring lever Characteristics OF max. RF min. OT min. MD max. FP max. OP SS-10GL13-E 8g 1g 1.2 mm 0.8 mm SS-10GL13-F, SS-5GL13-F SS-01GL13, SS-5GL13 16 g 50 g 2g 6g 1.2 mm 1.2 mm 0.8 mm 0.8 mm 15.5 mm 10.7±0.8 mm SS-10GL13 50 g 6g 1.0 mm 1.0 mm Hinge Roller Lever Models SS-01GL2(-E, -F) SS-5GL2(-F) SS-10GL2 t = 0.3 (see note 1) 14.5 A 4.8 dia. × 3.2 (see note 2) OP 2.35 –0.05 dia. 2.9 2.5 2.5±0.07 dia. 1.6 8.8 5.1 9.5±0.1 19.8 7.3 Note: +0.075 FP 9.5 10.2 6.4 +0.075 2.35 –0.05 dia. holes 3.2 6.4 Three, 1.6 dia. 1. Stainless-steel spring lever 2. Polyacetal resin roller Characteristics OF max. RF min. OT min. MD max. FP max. OP SS-01GL2-E 8g 1g 1.2 mm 0.8 mm SS-01GL2-F, SS-5GL2-F SS-01GL2, SS-5GL2 16 g 50 g 2g 6g 1.2 m 1.2 mm 0.8 mm 0.8 mm 19.3 mm 14.5 ± 0.8 mm SS-10GL2 50 g 6g 1.0 mm 1.0 mm 100 Snap Action Switch SS Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. ■ Correct Use Mounting Mount the switch onto a flat surface. Mounting on an uneven surface may cause deformation of the switch, resulting in faulty operation or breakage in the housing. ■ Cautions Handling Turn OFF the power supply before mounting or removing the switch, wiring, or performing maintenance for inspection. Failure to do so may result in electric shock or burning Operating Stroke Take particular care in setting the operating stroke for the pin plunger models. Make sure that the operating stroke is 70% to 100% of the rated OT distance. Do not operate the actuator exceeding the OT distance, otherwise the life expectancy of the switch may be shortened. Terminal Connection When soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then solder. Make sure that the capacity of the soldering iron is 60 W maximum. Do not take more than 5 seconds to solder the switch terminal. Improper soldering involving an excessively high temperature or excessive soldering time may deteriorate the characteristics of the switch. Be sure to apply only the minimum required amount of flux. The switch may have contact failures if flux intrudes in the interior of the switch. Use the following lead wires to connect to the solder terminals; Using Microloads Using a model for ordinary loads to switch microloads may result in faulty operation. Instead, use the models that are designed for microloads and that operate in the following range; Voltage (V) 30 0.16mA 26mA 100mA Model SS-5 SS-10 Operating range for micro load models SS-01 Operating range for general-load models SS-5, SS-10 Conductor size 0.5 to 0.75 mm2 0.75 mm2 24 If the PCB terminal models are soldered in a solder bath, flux will permeate inside the switch and cause contact failure. Therefore, manually solder the PCB terminal. Wire the quick-connect terminals (#110) with receptacles. Insert the terminals straight into the receptacles. Do not impose excessive force on the terminal in the horizontal direction, otherwise the terminal may be deformed or the housing may be damaged. 12 Inoperable range 5 0 1 10 100 1,000 1mA 100mA 160mA Insulation Distance Use a separator between the switch and metal mounting panels, to ensure proper dielectric characteristics are achieved. According to EN61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.6 mm. If the insulation distance cannot be provided in the product incorporating the switch, either use a switch with insulation barrier or use a separator to ensure sufficient insulation distance. Current (mA) However, even when using microload models within the operating range shown above, if inrush current or inductive voltage spikes occur when the contact is opened or closed, then contact wear may increase and so decrease the service life. Therefore, insert a contact protection circuit where necessary. Separator Snap Action Switch SS 101 MEMO 102 Snap Action Switch SS Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller’s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Snap Action Switch SS Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X303-E-1 11/09 Specifications subject to change without notice Printed in USA Snap Action Switch SS