TKM-4848

Safety Mats & Area Guarding UM Series UM Rev. 5.11 Universal Safety Mat System Heavy-Duty Four-Wire Presence Sensing Mats with Integrated (Non-Removable) Cable, Category 3 Controllers, and Perimeter Trim System • When UM series mats are combined with an MC3, MC4 or MC6 controller (with complete diagnostics), the result is a system that meets the standard EN 1760-1:1998 and is entitled to display the CE mark. See below for an overview of the various components. F Mat • Activation force: 30 kg (66 lb.) per ANSI/RIA 15.06-1999, ISO 13856-1:2001, ANSI B11.19-2003, and CSA Z432-04 • Conductive plates: 24 gauge galvanealed sheet steel • Contact yield strength in excess of 20,000 lb./sq. in.; Fork lift traffic of 12,000 lb. • Mat housing cross section: 13.5 mm (0.54 in.) • PVC black or yellow covering materials (other colors available on request) • Durometer of 80 (±3) shore A • Single-piece molded construction • Mat flammability self extinguishing, meets UL94VO • IP67 rated • Operating temperature -37 to 66°C (-35 to 150°F) • Mat cable: 18-gauge, 4-conductor, 16-strand, 300 VAC • Cable length: Standard 5 m (16 ft.), Optional 10 m (32 ft.) Controllers • Safety category 3 device • DIN-rail mount (MC3) • NEMA controllers (MC4, MC6) • 24 VDC or with universal power supply 100 to 240 VAC Trim • Two-part perimeter and joining trim simplifies installation and provides a custom appearance • Aluminum base surrounds mat, the safety yellow PVC cover secures mat in place, an aluminum cover that is installed in place of the PVC cover is also available • Two-part active joining trim joins multiple mats together • Molded inside and outside corners available as an option F2 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 r C US Description An Omron STI Universal Mat system (UM series mat combined with an MC3, MC4 or MC6) offers a simple method for guarding personnel around hazardous machines. A Universal Mat system offers freedom, flexibility, and reduced operator fatigue when compared with traditional guarding methods such as interlocked fences, pullback restraints or perimeter barriers. Full visibility of and access to the work area is maintained. There is no need to worry about personnel forgetting to replace mechanical barriers or close gates. How the System Works The operation of a Universal Mat system is easy to understand. The mat is a simple, normally open switch. When a specified minimum weight is applied to the mat the "switch" closes. This sends a signal to the controller which, in turn, sends a stop signal to the guarded machine. Each mat presents four wires to the controller. This provides the redundancy required to monitor the wiring for open circuits due to incorrect wiring or physical damage to the wires. In order to meet many national safety regulations, Omron STI offers trim to secure the mat to the floor so that it cannot be easily relocated and therefore become ineffective. For the Latest Information On the Internet: www.sti.com UM Series Applications Safety Mats & Area Guarding Mat Specifications Presence sensing safety mats are used to monitor an entire hazardous area. They offer flexibility, quick access and may frequently be the most economic choice. Other options for perimeter guarding include interlocked barrier guards and safety light curtains. However, personnel can become trapped inside a barrier guard and safety light curtains only monitor the perimeter, not the hazardous area inside. Additionally, mats can also simplify routine tasks such as machine setup, maintenance and repair. Applications can be found throughout industry and typically include the following areas: • Welding Robots • Assembly Machinery • Material Handling • Packaging Machinery • Punches • Presses • Robotic Work Cells Mat Chemical Resistance* Water Excellent Mineral Acids Good/Excellent Organic Acids Good/Excellent Alcohols Good Aldehydes Good/Excellent Caustics Good/Excellent Petroleum Solvents Good Organic Solvents Poor Chlorinated Solvents Poor *40 minute exposure @ 23°C (74°F) Mat Type: Normally open SPST, four-wire Mode: Pressure Sensitive Mat Size: Standard sizes from 12 x 12 in. (305 x 305 mm) to 48 x 72 in. (1219.2 x 1829.8 mm) Metric sizes from 300 x 300 mm (11.8 x 11.8 in.) to 1200 x 1800 mm (47.2 x 70.9 in.) Activation Force: Detects adults > 30 kg. (66 lbs.) Mat Flammability: Self extinguishing. Meets UL94VO Mat Housing Cross Section: 13.5 mm (0.54 in.) Mat Cover Material: PVC Durometer: 80 (±3) shore A Mat Cable: 18-gauge, 4-conductor, 16-strand, 300 VAC, with MC12DC male single key connector. 5 m (16 ft.) long. Operating Temperature: -37 to 66°C (-35 to 150° F) Environmental: IP67 Conforming to Standards: ANSI/RIA 15.06-1999, ANSI B11.19-2003, OSHA 1910.217(b), CSA Z432-04 Approvals: When used with an MC3, MC4 or MC6 controller the UM series safety mats comprise a system which has been EC type examined to the requirements of category 3, EN 954-1 and EN1760-1:1998. F Specifications are subject to change without notice. specifications and dimensions on ✎ For the MC Controllers, see www.sti.com Mat Selection Multiple UM series mat sizes are offered. A system can easily be configured to meet almost any guarding requirement. Standard Mat Sizes Widths 12 to 48 in. (6 in. increments) Lengths 12 to 72 in. (6 in. increments) Metric Mat Sizes Widths 500 to 1200 mm Lengths 500 to 1800 mm Custom Mat Sizes Widths Up to 48 in. Lengths Up to 72 in. Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com F3 UM Series Safety Mats & Area Guarding Trim Selection Several choices are available in trim selection and can be customized to a specific application. Two-Part Ramp Trim with Yellow PVC Cover This trim simplifies routing of cables and replacement of damaged mats. To position the mats correctly, place all of the mats in the approximate position, place the joining trim between the mats, then temporarily place the cover on the joining trim. Square the mats by sliding the ramp trim under the mats. When all of the mats are correctly positioned, anchor the perimeter trim to the floor. After the wires have been routed, a rugged cover of highly visible, safety yellow PVC is snapped into place. Corners can either be mitered or be Omron STI's exclusive molded corners. (See illustrations on this page.) Aluminum Blunt Trim Used to finish off the edge of a mat installation near a wall or machine. Helps hold mats in place. Aluminum Ramp Trim This single part aluminum ramp trim is available for areas where the two part ramp trim may not be suitable. Molded Corners Eliminates the need to miter the corners of perimeter trim. Designed to mate with Omron STI two-part ramp trim. Two-Part Ramp Trim with Aluminum Cover F This trim is the same as above except that the PVC cover is replaced with an aluminum cover that is attached by screws to the base. (See the Dimensions Section of this datasheet for details.) Two-Part Active Joining Trim Similar in concept to the two-part ramp trim, this trim provides an "active" joint where the perimeters of two mats adjoin each other. When a person steps on the surface cover of the active joining trim, the Universal Mat system will detect their presence and send a stop signal to the guarded machine. PVC Trim Cover Aluminum Floor F4 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com UM Series Safety Mats & Area Guarding Trim Dimensions (mm/in.) Outside Molded Corner Trim Model UMOC 2-Part Joining Trim (Base and Cover) 58.42 2.300 30.58 1.204 1.02 0.040 17.02 0.670 35.81 1.410 14.1 0.555 72.39 2.850 101.6 4.000 58.42 2.300 94.62 3.725 94.62 3.725 72.39 2.850 30.58 1.204 2-Part Joining Trim: PN 43222-0096 Joining Trim Aluminum Base: PN 32592 Joining Trim Cover Black: PN 32591 Joining Trim Cover Yellow: PN 32591-0010 2-Part Ramp Trim with PVC Cover (TKM) Molded Outside Corner: PN 25836 Inside Molded Corner Trim Model UMIC 21.89 0.862 23.1 0.910 F 11.8 0.47 58.9 2.32 57.48 2.263 91.4 3.60 72.39 2.850 94.62 3.725 57.48 2.263 18.4 0.72 Aluminum Base & PVC Cover: PN 43123-0096 Aluminum Base: PN 32667 PVC Cover: PN 32668 2-Part Ramp Trim with Aluminum Cover (TKAT) 94.62 3.725 72.39 2.850 58.9 2.32 21.89 0.862 Molded Inside Corner: PN 25837 Aluminum Base & Aluminum Cover: PN 43123-1096 Aluminum Base: PN 32667 Aluminum Cover: PN 26441 Blunt Trim 10.8 0.425 Aluminum Single Part Ramp Trim (TKA) 13.72 Ref 0.540 25.4 Ref 1.00 10.64 0.419 13.72 0.540 Blunt Trim: PN 43223-0096 19° Ref 13.72 Ref 0.540 19.53 0.769 63.50 Ref 2.500 9.35 0.367 7.59 Ref 0.299 Aluminum Ramp Trim: PN 43224-0096 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com F5 UM Series Safety Mats & Area Guarding Two-Part Trim with PVC Cover and Mitered Corners (TKM) Slide Alum Base Under Mat PVC Trim Cover MAT FASTENING DETAIL Safety Mat Screw Aluminum Trim Base 12.7 0.50 (Ref) 56.79 2.236 Anchor 50.8 2.00 4-Cond Cable with MC12DC Male Single Key 4-Term Connector 25.4 1.00 45° F L = Mat Length (PVC Trim Cvr) A = L + (Aluminum 137.4 B=L+ Trim Base) 5.41 609.6 Shown 24.0 114.8 4.52 104.5 4.115 (Ref) 724.4 Shown 28.52 Cable Conduit Drill Holes in Groove on Boss (#8 x 1.25" Screw) 746.8 Shown. TOL = - 0.381 / +0 29.41 - 0.015 / +0 STI To Cut Alum Trim "Rib" 25.4 (1.00) Section Here Two-Part Trim with PVC Cover and Molded Corners (TKC) Safety Mat PVC Trim Cover Corner Slide Alum Base Under Mat MAT FASTENING DETAIL Screw Aluminum Trim Base 12.7 0.50 (Ref) 56.79 2.236 4-Cond Cable with MC12DC Male Single Key 4-Term Connector 50.8 TOL = - 0.381 / +0 2.00 - 0.015 / +0 50.8 TOL = - 0.381 / +0 (Alum Base) B = L 2.00 - 0.015 / +0 (PVC Trim Cvr) A = L - 104.5 4.115 (Ref) L = Mat Length 138.2 (Overall Length) C = L + 5.44 F6 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 STI To Cut Alum Trim "Rib" 25.4 (1.00) Section Here For the Latest Information On the Internet: www.sti.com Anchor 50.8 2.00 25.4 1.00 Cable Conduit Drill Holes in Groove on Boss (#8 x 1.25" Screw) UM Series Safety Mats & Area Guarding Two-Part Trim with Aluminum Cover and Mitered Corners (TKAT) Slide Alum Base Under Mat Aluminum Trim Cover MAT FASTENING DETAIL Safety Mat Aluminum Trim Base 12.7 0.50 (Ref) 56.79 2.236 50.8 2.00 4-Cond Cable with MC12DC Male Single Key 4-Term Connector 609.6 Shown 24.0 L = Mat Length 114.8 4.52 (Alum Trim Cvr) A = L + 25.4 1.00 (Aluminum 137.4 746.8 Shown. TOL = - 0.381 / +0 B=L+ Trim Base) 5.41 29.41 - 0.015 / +0 Cable Conduit Note: Use Groove for Hole Location Guide Ø7.14 0.281 104.5 4.115 (Ref) 724.4 Shown 28.52 SS Flat Head Phillips Thrd Cutting 6-32 Thread, 3/8" Long Screw F Ø3.71 0.146 STI To Cut Alum Trim "Rib" 25.4 (1.00) Section Here Single-Part Trim Aluminum Trim (TKA) Aluminum Trim Ramp 12.7 0.50 (Ref) Safety Mat 25.4 1.00 25.4 (1.0) Section of Rib Removed 101.6 4.00 (Ref) 50.8 2.00 Note 1 4-Cond Cable with MC12DC Male Single Key 4-Term Connector 45° 56.79 2.236 L = Mat Length (Alum Trim) A = L + MAT FASTENING DETAIL 30.2 1.19 (Ref) Screw (90705) 27.7 1.09 (Ref) Anchor (90706) Cable Conduit Drill and Countersink Holes in Groove for (8-32 x 1.25" Screw) 127.3 TOL = - 0.381 / +0 5.01 - 0.015 / +0 STI To Cut Alum Trim "Rib" 25.4 (1.00) Section Here Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com F7 UM Series Mat Measurement Mat Dimension - Base = Top Surface Dimension + 11.2 (0.44 ) i.e. Top Mat Dimension = 305 (12.00), Mat Base = 316 (12.44) Mat Dimension - Top Surface 50.8 2.00 Mat Cable Exit Location A Mat Cable exits on the side indicated by the first dimension in the model number i.e. UM5-1254, Cable exits 12" dimension i.e. UM5-4824, Cable exits 48" dimension F Pin Out Connector UMQ5, UMQ10, Integral UM Mat Cables Index/Keyway #20 Pin Contact (4 places) White Blue White Blue Index/Keyway 2 3 2 1 Brown #20 Pin Contact (44places) Black 1 3 Mating/Face View 4 Brown Black Male Connector Mating/Face View UM-Y-2-1 "Y" Connector Female B 4 Black 1 Brown 20 0.79 Wire Diagram Wire Diagram 3 Red/Black Female B 2 Black Red/White 4 1 Brown Female A 3 Red/Black 1 2 Red/White 4 Female A 3 Blue 2 1 White 4 Male Connector Male 20 0.79 4 1 Male 3 4 2 1 3 2 49.9 1.96 49.9 1.96 Rear Side 3 Blue 2 White Rear Side F8 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com Safety Mats & Area Guarding UM Series Safety Mats & Area Guarding Custom Mats and Trims Omron STI makes ordering custom mats and trims easy. Simply send us a sketch of your layout including dimensions. Make note of where you want ramp trim or blunt trim. We'll work from your sketch to create a detailed drawing of your specifications. Step 2: A Quote Drawing with Dimensions is Created Step 1: Customer Sends a Sketch Example Molded Outside Corner UM4234SPCOL 1947.2 76.66 2 Part Ramp Trim CUSTOM MAT STANDARD MAT UM4236 685.8 27.00 2 Part Joining Trim 1162.1 45.75 362 14.25 209.6 8.25 Molded Inside Corner 450.9 17.75 292.1 11.50 277.1 10.91 F 106.4 16.00 Blunt Trim 1011.2 39.81 Step 3: When the Order is Placed, A Detailed Layout Showing all Components of the Trim System is Made E 1851.9 72.91 B 57.2 2.25 41.4 1.63 41.4 1.63 25.4 1.00 27.9 1.10 38.1 1.50 673.1 26.50 38.1 1.50 57.2 2.25 108 4.25 B A N C E M 1162.1 45.75 M 187.5 7.38 339.6 13.37 K 69.1 2.72 L 25.4 1.00 56.4 2.22 D K J 25.4 1.00 H G 23.1 0.91 C UM4236 590.6 23.25 Machined Cut Out (2 places) 108 4.25 UM4234SPCOL N 41.4 1.63 41.4 1.63 25.4 1.00 27.9 1.10 F 28.7 1.13 12.7 0.50 Machined Cut Out (2 places) D 940.6 37.03 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com F9 UM Series Safety Mats & Area Guarding Ordering Ordering - Standard Size A Universal Mat System contains at least one mat, sufficient perimeter and joining trim and a controller. For multiple mat installations using the MC3 controller, the mats are connected in series to the controller. This may be done using the UMDB6 wiring accessory. When using the MC4 or MC6 controllers, six mats may be connected directly to the controller. Each component of a Universal Mat system must be ordered individually. 3612 36 x 12 (914.4 x 304.8) 17.3 (7.8) 3618 36 x 18 (914.4 x 457.2) 25.9 (11.8) 3624 36 x 24 (914.4 x 609.6) 34.6 (15.7) 3630 36 x 30 (914.4 x 762.0) 43.2 (19.6) 3636 36 x 36 (914.4 x 914.4) 51.8 (23.5) 3654 36 x 54 (914.4 x 1371.6) 77.8 (35.3) 3660 36 x 60 (914.4 x 1524.0) 86.4 (39.2) Standard Mat Ordering Code: 3666 36 x 66 (914.4 x 1676.4) 95.0 (43.1) 3672 36 x 72 (914.4 x 1828.8) 103.7 (47.0) ___ - ___ ___ 4212 42 x 12 (1066.8 x 304.8) 20.2 (9.1) 4218 42 x 18 (1066.8 x 457.2) 30.2 (13.7) 4224 42 x 24 (1066.8 x 609.6) 40.3 (18.3) 4230 42 x 30 (1066.8 x 762.0) 50.4 (22.9) 4236 42 x 36 (1066.8 x 914.4) 60.5 (27.4) 4242 42 x 42 (1066.8 x 1066.8) 70.6 (32.0) 4254 42 x 54 (1066.8 x 1371.6) 90.7 (41.2) 4260 42 x 60 (1066.8 x 1524.0) 100.8 (45.7) 4266 42 x 66 (1066.8 x 1676.4) 110.9 (50.3) 4272 42 x 72 (1066.8 x 1828.8) 121.0 (54.9) 4812 48 x 12 (1219.2 x 304.8) 23.0 (10.5) 4818 48 x 18 (1219.2 x 457.2) 34.6 (15.7) 4824 48 x 24 (1219.2 x 609.6) 46.1 (20.9) 4830 48 x 30 (1219.2 x 762.0) 57.6 (26.1) 4836 48 x 36 (1219.2 x 914.4) 69.1 (31.4) 4842 48 x 42 (1219.2 x 1066.8) 80.6 (36.6) 4848 48 x 48 (1219.2 x 1219.2) 92.2 (41.8) 4854 48 x 54 (1219.2 x 1371.6) 103.7 (47.0) 4860 48 x 60 (1219.2 x 1524.0) 115.2 (52.3) 4866 48 x 66 (1219.2 x 1676.4) 126.7 (57.5) 4872 48 x 72 (1219.2 x 1828.8) 138.2 (62.7) 1 2 2 F Example: UM10-1266 This example is a 12 x 66 in. standard black mat with 10 m cable. 1 Information required. Represents color and cable length of the mat. Designator Description UM5 Black mat with 5 m cable UM10 Black mat with 10 m cable UMY5 Yellow mat with 5 m cable UMY10 Yellow mat with 10 m cable Note: All standard mats are stocked in black with 5 m cable. 2 Information required. Represents mat size. Dimensions are for active mat area. Mats are an additional 0.5 in. (12 mm) in each dimension. Cables exit by the first dimension in the model number. Designator F10 Standard Mat Size Mat Ship Weight in. (mm) lbs. (Kg) 1212 12 x 12 (304.8 x 304.8) 5.8 (2.6) 1254 12 x 54 (304.8 x 1371.6) 25.9 (11.8) 1260 12 x 60 (304.8 x 1524.0) 28.8 (13.1) 1266 12 x 66 (304.8 x 1676.4) 31.7 (14.4) 1272 12 x 72 (304.8 x 1828.8) 34.6 (15.7) 1812 18 x 12 (457.2 x 304.8) 8.6 (3.9) 1818 18 x 18 (457.2 x 457.2) 13.0 (5.9) 1854 18 x 54 (457.2 x 1371.6) 38.9 (17.6) 1860 18 x 60 (457.2 x 1524.0) 43.2 (19.6) 1866 18 x 66 (457.2 x 1676.4) 47.5 (21.6) 1872 18 x 72 (457.2 x 1828.8) 51.8 (23.5) 2412 24 x 12 (609.6 x 304.8) 11.5 (5.2) 2418 24 x 18 (609.6 x 457.2) 17.3 (7.8) 2424 24 x 24 (609.6 x 609.6) 23.0 (10.5) 2454 24 x 54 (609.6 x 1371.6) 51.8 (23.5) 2460 24 x 60 (609.6 x 1524.0) 57.6 (26.1) 2466 24 x 66 (609.6 x 1676.4) 63.4 (28.7) 2472 24 x 72 (609.6 x 1828.8) 69.1 (31.4) 3012 30 x 12 (762.0 x 304.8) 14.4 (6.5) 3018 30 x 18 (762.0 x 457.2) 21.6 (9.8) 3024 30 x 24 (762.0 x 609.6) 28.8 (13.1) 3030 30 x 30 (762.0 x 762.0) 36.0 (16.3) 3054 30 x 54 (762.0 x 1371.6) 64.8 (29.4) 3060 30 x 60 (762.0 x 1524.0) 72.0 (32.7) 3066 30 x 66 (762.0 x 1676.4) 79.2 (35.9) 3072 30 x 72 (762.0 x 1828.8) 86.4 (39.2) Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 UM Mats vs. UMQ Mats UMQ After the success and the development of the UM Series Mat, the UMQ Series Mat with Quick-Disconnect Connector was developed by Omron STI. The UMQ Universal Mats are heavy-duty four-wire presence sensing mats with removable cable, Category 3 controllers and perimeter trim. For detailed specifications and ordering information on the UMQ Mat System, please visit our website at www.sti.com and enter 'UMQ" in the SpeedSPEC search box. For the Latest Information On the Internet: www.sti.com UM Series Safety Mats & Area Guarding Ordering (continued) Ordering - Metric Size Ordering - Perimeter Trim A Universal Mat System contains at least one mat, sufficient perimeter and joining trim and a controller. For multiple mat installations using the MC3 controller, the mats are connected in series to the controller. This may be done using the UMDB6 wiring accessory. When using the MC4 or MC6 controllers, six mats may be connected directly to the controller. Each component of a Universal Mat system must be ordered individually. Ordering Perimeter Trim for a Single Standard Size Mat** ___ - ___ - ___ Example: UM10-0500-0500 3 This example is a 500 x 500 mm standard black mat with 10 m cable. 1 Information required. Represents color and cable length of the mat. Designator Description UMM5 Black mat with 5 m cable UMM10 Black mat with 10 m cable UMYM5 Yellow mat with 5 m cable UMYM10 Yellow mat with 10 m cable 2 Information required. Represents mat width. Dimensions are for active mat area. Mats are an additional 0.5 in. (12 mm) in each dimension. Cables exit by the first dimension in the model number. Designator Designator Description TKM Trim kit, 2-part mitered corners with PVC top cover TKAT Trim kit, 2-part mitered corners with aluminum top cover TKC Trim kit, 2-part with molded corners TKA Trim kit, single part aluminum ramp trim (mitered only) 4 Information required. Represents trim kit size. Use the designator located in 2 corresponding to the mat size. F **To order perimeter and joining trim for a multiple mat or custom order configuation, please consult Omron STI. Ordering Perimeter Trim for a Single Metric Size Mat** ___ - ___ 3 4 Metric Mat Width mm (in.) 0500 500 (19.7) 0750 750 (29.5) 1000 1000 (39.4) 1200 1200 (47.2) 3 Information required. Represents mat length. Dimensions are for active mat area. Mats are an additional 0.5 in. (12 mm) in each dimension. Cables exit by the first dimension in the model number. Designator Example: TKM-1266 This example is a trim kit with mitered corners to fit a 12 x 66 in. standard mat. 3 Information required. Represents the corner style used on the trim kits. Standard Mat Ordering Code: 1 2 ___ - ___ 3 4 Example: MTKM-0500-0500 This example is a trim kit with mitered corners to fit a 500 x 500 mm metric mat. 3 Information required. Represents the corner style used on the trim kits. Designator Description MTKM Metric trim kit with mitered corners MTKC Metric trim kit with molded corners TKAT is available upon request. Metric Mat Width mm (in.) 0500 500 (19.7) 0750 750 (29.5) 1000 1000 (39.4) 1250 1250 (49.2) 1500 1500 (59.1) 1750 1750 (68.9) 1800 1800 (70.9) Note: To calculate the approximate shipping weight in pounds, please use the following formula: L x W ÷ 1000 x 0.0625. Example: A 500 mm x 500 mm mat would weigh approximately 15.62 lbs. (500 x 500 ÷ 1000 x 0.0625 = 15.62) 4 Information required. Represents trim kit size. Use the designator located in 2 corresponding to the mat size. **To order perimeter and joining trim for a multiple mat or custom order configuation, please consult Omron STI. specifications and dimensions ✎ For on the MC Controllers, see www.sti.com details on ordering a ✎ For custom safety mat, see page F9 details on ordering a trim kit for ✎ For a multiple configuation mat, please consult Omron STI. Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com F11 UM Series Safety Mats & Area Guarding Ordering (continued) Rapid Delivery Products The following models are readily available for shipment today or at least within 3 days. Please consider these for all new applications. F Part Number 74005-1212 74005-1254 74005-1260 74005-1866 74005-1872 74005-2412 74005-2418 74005-2424 74005-2454 74005-2460 74005-2472 74005-3018 74005-3024 74005-3030 74005-3054 74005-3060 74005-3072 74005-3612 74005-3618 74005-3624 74005-3630 74005-3636 74005-3654 74005-3660 74005-3672 Description UM1212 Universal Black Mat, 5 m Cable UM1254 Universal Black Mat, 5 m Cable UM1260 Universal Black Mat, 5 m Cable UM1866 Universal Black Mat, 5 m Cable UM1872 Universal Black Mat, 5 m Cable UM2412 Universal Black Mat, 5 m Cable UM2418 Universal Black Mat, 5 m Cable UM2424 Universal Black Mat, 5 m Cable UM2454 Universal Black Mat, 5 m Cable UM2460 Universal Black Mat, 5 m Cable UM2472 Universal Black Mat, 5 m Cable UM3018 Universal Black Mat, 5 m Cable UM3024 Universal Black Mat, 5 m Cable UM3030 Universal Black Mat, 5 m Cable UM3054 Universal Black Mat, 5 m Cable UM3060 Universal Black Mat, 5 m Cable UM3072 Universal Black Mat, 5 m Cable UM3612 Universal Black Mat, 5 m Cable UM3618 Universal Black Mat, 5 m Cable UM3624 Universal Black Mat, 5 m Cable UM3630 Universal Black Mat, 5 m Cable UM3636 Universal Black Mat, 5 m Cable UM3654 Universal Black Mat, 5 m Cable UM3660 Universal Black Mat, 5 m Cable UM3672 Universal Black Mat, 5 m Cable 74005-4224 74005-4230 74005-4236 74005-4242 74005-4254 74005-4260 74005-4272 74005-4812 74005-4824 74005-4830 74005-4836 74005-4842 74005-4848 74005-4860 74005-4866 74005-4872 UM4224 Universal Black Mat, 5 m Cable UM4230 Universal Black Mat, 5 m Cable UM4236 Universal Black Mat, 5 m Cable UM4242 Universal Black Mat, 5 m Cable UM4254 Universal Black Mat, 5 m Cable UM4260 Universal Black Mat, 5 m Cable UM4272 Universal Black Mat, 5 m Cable UM4812 Universal Black Mat, 5 m Cable UM4824 Universal Black Mat, 5 m Cable UM4830 Universal Black Mat, 5 m Cable UM4836 Universal Black Mat, 5 m Cable UM4842 Universal Black Mat, 5 m Cable UM4848 Universal Black Mat, 5 m Cable UM4860 Universal Black Mat, 5 m Cable UM4866 Universal Black Mat, 5 m Cable UM4872 Universal Black Mat, 5 m Cable = Highlighted Rapid Delivery products are available for shipment today or within THREE days. Accessories for Standard and Metric Sized Mats Model Number UMRT4 UMRT8 UMRT8A UMJS4 UMJS8 UMJTC8Y UMBT4 UMBT8 UMAL UMOC UMIC UMDB-6 UMDB-8 UMDB-10 UMEC-DB6 UMEC-03 UMEC-05 UMEC-10 UMEC-15 UMPMC UM4PRC UM-Y-2-1 UMQ5 UMQ10 F12 Description Weight Bulk two-part ramp trim with yellow PVC cover 1.22 m (48 in.) length 1.5 kg (3.3 lb.) Bulk two-part ramp trim with yellow PVC cover 2.44 m (96 in.) length 3.0 kg (6.6 lb.) Bulk two-part ramp trim with aluminum top 2.44 m (96 in.) length 3.2 kg (7.0 lb.) Bulk two-part active joining trim 1.22 m (48 in.) length 1.4 kg (3.0 lb.) Bulk two-part active joining trim 2.44 m (96 in.) length 2.7 kg (6.0 lb.) Bulk joining trim cover yellow 2.44 m (96 in.) 0.5 kg (1.0 lb.) Bulk blunt trim 1.22 m (48 in.) length 1.1 kg (2.5 lb.) Bulk blunt trim 2.44 m (96 in.) length 2.3 kg (5.0 lb.) Bulk aluminum ramp trim 2.44 m (96 in.) 2.9 kg (6.5 lb.) Molded outside corner Molded inside corner Universal Safety Mat distribution box with 6 mat input connectors and one output connection to the controller Universal Safety Mat distribution box with 8 mat input connectors and one output connection to the controller Universal Safety Mat distribution box with 10 mat input connectors and one output connection to the controller 15 m extension cable (distribution box to controller) for UMDB-8 or UMDB-10 3 m (9 ft.) extension cable for mat or UMDB-6 5 m (16 ft.) extension cable for mat or UMDB-6 10 m (32 ft.) extension cable for mat or UMDB-6 15 m (49 ft.) extension cable for mat or UMDB-6 Panel-mount connector. Allows the controller to accept quick disconnect cable from UM series mats. 4-pin male QD field replacement connector for mat cables "Y" connector, internally connected to allow 2 mats to 1 input to controller or connector 5 m quick-disconnect cable 10 m quick-disconnect cable Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com