TL5012-2110SM

TL5012 R C US Conforms to EN1088, EN60947-5-1, EN292, EN60204-1, EN50081, EN50082 UL and C-UL listed safety interlock switches G TL5012 Compact Safety Interlock Switch with Guard Door Locking ■ ■ ■ High locking force of 1000 N (225 lb.) locks guard door shut until machine is safe to enter NEMA 6 enclosure enables the TL5012 to withstand water washdown cleaning Lid-mounted status light is on when solenoid is energized, indicating that solenoid has unlocked the guard door ■ ■ ■ Easy installation—compact footprint of 2.25 x 5.25 in. and rotatable head allowing 4 possible actuator entry points makes installation easy Optional override key allows manual unlocking of the guard while, at the same time, locking the safety contacts open Long life—the TL5012, with its stainless steel actuator, is designed for a minimum of one million actuations. A N Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 G200 For the Latest Information On the Internet: www.sti.com or www.omron.ca Go to the Engineering Guide For in-depth information on safety standards and use. For More Guarding Products See Section N for safeguarding cutting and turning machines MSR7C DC A1 A2 ED. MSR5T MSR9T 7 21 MSR6R/T MSR7R TL5012 9 10 MSR10 RD MSR8T MSR11R & 12T MSR14T Ferrogard GS1/GS2 8 ■ 22 4 Operation Atlas 4 (3 pole) Trojan Contact Arrangements MSR15D or BUTTON 2 E-STOP BUTTON 1 3 CU2 GS1 & GS2 CU1 Rotacam 3pole Protekta 2 hand control Centurion 3pole Spartan B A 1 G 2 D The head rotates 180° to give four possible actuator entry points. Once the required entry has been selected, attach catch case to the switch. Emergency Override The TL5012’s locking mechanism can be overridden in emergencies by using either a torx screwdriver or the override key. A distance of 2.45 mm or less is required between face of switch and face of actuator for switch to lock. Locking Force = 1000 N (225 lb.) maximum ■ Optional Override key Applications Typical applications are on sliding guard doors or swinging guard doors that must remain locked until a signal is applied to unlock the guard door. Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com or www.omron.ca G201 safety interlock switches C TL5012 ■ Application Monitoring Units ■ Specifications Electrical TL5012-1 SR223SMT Timer Unit safety interlock switches G All Models TL5012-2 Contact Configurations: 2 N/C + 1 N/O 3 N/C Safety Contacts: 2 N/C positive break 3 N/C positive break Switching Ability AC: DC: 500 V–1 A, 250 V–2 A, 100 V–5 A 250 V–0.5 A, 24 V–2 A Safety Contact Gap: > 2 mm (0.079 in.) Auxiliary Contacts: 1 N/O Used with the TL4024 for machines with constant overrun. Gives a timed delay to the lock/release signal. Failsafe and adjustable to a range of times from 1.0 seconds up to 31 seconds. Max Switching Current/Volt/Amp: 500 V/500 VA Minimum Current: 5 V 5 mA DC Electrical Life: 1 x 106 minimum Solenoid Supply Voltage: 24 VDC/AC or 110 VAC or 220 VAC information on the SR223SMT, ✎ For see page H82 Solenoid Power: 7 W, approx. 900 mA inrush Solenoid Rating: 100% duty Mechanical Mounting: Actuator Travel for Positive Opening: Any position Mounting Hardware: SR125SMS Stop Motion Sensing Unit Used with the TL4024 for machines with inconstant or variable overrun. Senses back EMF of AC or DC motors. Failsafe and adjustable to a range of 0.01 V to 0.10 V. information on the SR125SMS, ✎ For see page H42 Contacts open when solenoid is energized 2 x M5 screws Min Operating Radius: Approximately 175 mm (7 in.) with standard actuator Max Holding Force: 1000 N (225 lb.) Max Actuation Speed: 160 mm/sec (6.3 in./sec) Max Activation Frequency: 1 cycle/sec Case Material: UL listed, glass-filled polyester Actuator Material: Stainless steel Wiring Entry: 1 x M20 conduit with 0.5 in. NPT adapter Weight: 260 g (9.2 oz.) Color: Red Mechanical Life: 1 x 106 minimum Environmental Protection: Operating Temperature: -20 to 60°C (-4 to 176°F) Cleaning: Water washdown IP67 (NEMA 6) Compliance Standards: EN1088, EN60947-5-1, EN292, EN60204-1, EN50081, EN50082 Approvals/Listings: CE marked for all applicable directives, UL and C-UL Safety Monitoring Relay Units Safety monitoring relays ensure a maximum level of safety by monitoring all wiring in the safety circuit, including switches and contactors. Any fault and the power to the machine is switched off. A variety of safety monitoring relay units are available. Specifications are subject to change without notice. Note: The safety contacts of the Omron STI switches are described as normally closed (N/C)—i.e., with the guard closed, actuator in place, and the machine able to be started. A information on Safety Monitoring ✎ For Relays, see page H1 Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 G202 N For the Latest Information On the Internet: www.sti.com or www.omron.ca Go to the Engineering Guide For in-depth information on safety standards and use. For More Guarding Products See Section N for safeguarding cutting and turning machines TL5012 Dimensions — mm/in. 120 /4.72 StAnDArD ActUAtOr 37 1.45 3.5 0.14 9 0.354 8 0.315 11.2 0.441 29 1.142 20.5 0.807 52 2.047 40 1.57 4 0.16 m5 cSK 40 1.57 52 /2.047 25.5 1.004 52 2.05 31 1.22 8 20 0.31 0.79 cAtch retAiner 6.8 0.27 4 x Ø5.5 0.22 2 x m3 G Adjusting screws 19 0.75 13 0.51 51 2.01 18 0.71 Ordering Model Solenoid Contacts Wiring Entry Part No. TL5012-1024SM (standard actuator) 24 VAC/DC 2 N/C + 1 N/O 1 x M20 with NPT adapter 44530-0010 TL5012-1110SM (standard actuator) 110 VAC 2 N/C + 1 N/O 1 x M20 with NPT adapter 44530-0020 TL5012-1220SM (standard actuator) 220 VAC* 2 N/C + 1 N/O 1 x M20 with NPT adapter 44530-0030 TL5012-2024SM (standard actuator) 24 VAC/DC 3 N/C 1 x M20 with NPT adapter 44530-0050 TL5012-2110SM (standard actuator) 110 VAC 3 N/C 1 x M20 with NPT adapter 44530-0060 TL5012-2220SM (standard actuator) 220 VAC* 3 N/C 1 x M20 with NPT adapter 44530-0070 Override key, molded plastic 44530-0700 Spare standard actuator (without catch and catch case) 44519-0700 Spare mechanical catch kit (use with standard actuator only) 44501-0740 Spare alignment guide (plastic) 44501-0770 Spare M20 to 0.5 in. NPT adapter 44512-0110 M20 Cord Grip 44512-0090 Conduit Lights (see pages G239 & G240) Accessories (see page G238) *220 VAC units are available on special order. Minimum order quantities may apply. Omron Scientific Technologies, Inc. USA Tel. 1/888/510-4357 Canada Tel. 1/866/986-6766 For the Latest Information On the Internet: www.sti.com or www.omron.ca G203 safety interlock switches 4 18 0.157 0.709 14.5 0.571 5.5 0.217 7.25 0.285 34.5 1.358 1.5 0.059 5.5 0.217 8 0.315 18 0.71 36 1.42 fleXiBle/ADJUStABle ActUAtOr 1 40/1.575 KeY ■ 52 2.05 14.5 0.57 cAtch cASe 5 0.197 7 0.276 40/1.575 52/2.047 58/2.283 14 0.551 35 1.378 40 1.575 emergencY releASe POintS 12 0.472 cOnDUit entrY m20 31 1.220 2.5 0.098 ■