V530-C300E

Handheld 2-Dimensional Code Reader V530-H3 Easy Handheld Reading of Directly Marked, Ultra-Small, 2-Dimensional Codes Features Reads Directly Marked 2-Dimensional Codes Reads Dot Cell Codes In addition to 2-dimensional codes printed onto paper, this convenient handheld unit easily reads codes directly marked with a laser marker onto metal, resin, or glass. (See note.) The Handheld 2-Dimensional Code Reader can also read dot cell codes. Note: The ability to read directly marked codes is affected by the marking method and the material which is marked. These factors must be carefully considered before selecting the Handheld 2-Dimensional Code Reader. Data Matrix (ECC200) QR Code Reads Ultra-Small 2-Dimensional Codes Ultra-high resolution of 0.05 mm (in the V530-H301 Coaxial Lighting Model) makes it possible to read the ultra-small 2-dimensional codes that are used in many of today’s smaller, space-saving products and parts. Note: The readable direction is limited for dot cell codes. Three Models to Suit Target Objects Three models are available to match the objects to be read, and the marking method. V530-H301 Coaxial Lighting Model 0.7 mm 0.7 mm 2 Handheld 2-Dimensional Code Reader V530-H3 For reading 2-dimensional codes marked onto polished wafer surfaces, LCD glass, and lenses. V530-H302 Oblique Lighting Model V530-H303 Back Lighting Model For reading 2-dimensional codes marked onto printed wiring boards, electronic parts, and IC packages. STEP 1 For reading 2-dimensional codes marked onto LCD glass substrates or color filters. STEP 2 Use the Controller DIP switch to select the matrix size (Data Matrix) or symbol color (QR Code). Read the target 2-dimensional code. Lightweight, Compact, Handheld Design Measuring only 175 mm in length and weighing only 100 g, the Handheld 2-Dimensional Code Reader can be used to control a variety of production information, such as the production number and lot number, on cell lines. Or, it can be used together with the V530R150E-3/V530-R150EP-3 Fixed 2-Dimensional Code Reader as an ideal combination for automated lines. Enables Easy Problem Analysis STEP 3 When the Reading Complete signal sounds and the green LED illuminates, the setting procedure is finished. Using the Console and Monitor, the 2-dimensional code reading condition can be checked on-the-spot. Up to 24 NG images can also be stored in memory for use in troubleshooting reading problems. For example, the finder pattern, cell recognition and reading data can be viewed on the Monitor. Finder Pattern (Cutting Symbol) The shape of this pattern, which is used to detect the position of the 2-dimensional code, differs for each type of code. Finder patterns Data Matrix (ECC200) QR Code Easy Optimization Optimal settings can be easily made by setting the DIP switch on the Controller and then reading the target 2-dimensional code. More detailed settings can be made by using the Console and Monitor. Handheld 2-Dimensional Code Reader V530-H3 3 Applications Printed wiring boards Wafer LCD glass substrate Ordering Information ■ List of Models ■ Optional Models Item Handheld Reader Model Item Model Coaxial Lighting Model V530-H301 Console F150-KP Oblique Lighting Model V530-H302 Monitor Cable (2 m) RCA/BNC video cable Back Lighting Model V530-H303 LCD Monitor F150-M05L Controller V530-C300E Handheld Reader Cable (2 m) V530-W001 Specifications ■ Handheld 2-Dimensional Code Reader Model Item Performance specifications General specifications Field of vision V530-H301 V530-H302 6 × 6 mm 6 × 6 mm Resolution 50 µm 100 µm 100 µm Lighting method Coaxial lighting Oblique lighting Back lighting Reading method Touch Ambient operating temperature 0 to 38°C (with no icing or condensation) Ambient operating humidity 35% to 85% (with no condensation) Ambient operating environment No corrosive gases Storage temperature −25 to 60°C Weight Approx. 100 g (not including cable) Case material ABS resin (reading section: POM) 4 V530-H303 3 × 3 mm Handheld 2-Dimensional Code Reader V530-H3 ■ Controller Item Performance specifications General specifications V530-C300E Readable codes Data Matrix (ECC200): 10 × 10 to 26 × 26 QR Code (Models 1, 2): Versions 1 to 6 (21 × 21 to 41 × 41) Interface RS-232C Ambient operating temperature 0 to 50°C (with no icing or condensation) Ambient operating humidity 35% to 85% (with no condensation) Ambient operating environment No corrosive gases Storage temperature −25 to 60°C Power supply voltage 24 VDC (+10%, −15%) Current consumption 0.5 A Number of pixels (resolution) 512 (H) × 484 (V) Number of scenes 2 Image memory function Maximum of 24 images stored. Operation method Menu selectable Processing method Gray Readable direction 360° Monitor interface 1 channel (over scan monitor) Weight Approx. 500 g Case material ABS/PC resin ■ Handheld Reader Cable Item V530-W001 Ambient operating temperature 0 to 50°C (with no icing or condensation) Ambient operating humidity 35% to 85% (with no condensation) Ambient operating environment No corrosive gases Storage temperature −25 to 60°C Length 2m Cover material Polyvinyl chloride resin Handheld 2-Dimensional Code Reader V530-H3 5 System Configuration Handheld 2-Dimensional Code Readers Coaxial Lighting Model Back Lighting Model Oblique Lighting Model V530-H301 V530-H302 V530-H303 Select the model that best matches the marked material. Power Supply Recommended Power Supply: OMRON S82K-01524 Note: Use specified voltage. V530-W001 Handheld Reader Cable F150-KP Console (2-m Cable) Monitors V530-C300E Controller F150-M05L Liquid Crystal Montior (pin input) Personal Computer Programmable Controller RCA/BNC Video Cable Monitor Cable (2 m) Note: NTSC monitors and monitors with external video input terminals can also be used. BNC Jack RS-232C The products inside the green box are optional. Note: The F150-M09-2D does not conform to EC Directives. 6 Handheld 2-Dimensional Code Reader V530-H3 Model Selection Select the Handheld Reader that best matches the marked material. Coaxial Lighting Model V530-H301 For directly marked items with mirror-like surfaces, such as wafers, or LCD glass substrates, stable reading can be achieved with the Coaxial Lighting Model because it detects only regular reflected light. Application Examples Codes on wafers or LCD glass substrates. A 2-Dimensional Code on Wafer Read Image Oblique Lighting Model V530-H302 For laser-marked codes on comparatively glossy surfaces such as printed wiring boards or metal parts, or for codes printed onto highly diffusing surfaces such as paper, stable reading can be achieved with the Oblique Lighting Model. Application Examples Labels or directly marked printed wiring boards or electronic parts. A 2-Dimensional Code on a Printed Wiring Board Read Image Back Lighting Model V530-H303 For transparent objects such as glass substrates and lenses, a stable, high-contrast image can be obtained by using the Back Lighting Model to detect differences between the transmitted and interrupted light. Application Examples Codes on transparent objects such as glass substrates and lenses. A 2-Dimensional Code on a Glass Substrate Read Image Handheld 2-Dimensional Code Reader V530-H3 7 Dimensions Note: All units are in millimeters unless otherwise indicated. Handheld 2-Dimensional Code Reader V530-H301 V530-H302 32 0.8 28 28 32 0.8 0.8 28 V530-H303 1 1 17 5.1 150û 150û 18 0 17 7.6 1 15 × 15 21.4 19 × 19 21.4 12.4 2.7 21.4 26.5 26.5 26.4 31.1 Controller V530-C300E 16.4 83.5 101.7 130 10 11.5 22.2 110 90 100 110 18.6 10 10 10 Mounting hole dimensions (1:2) 120 Four, 4.5-dia. mounting holes 8.3 dia. 4.1 52.4 100±0.2 Four, M4 holes 50 120±0.2 8 18 8.8 Handheld 2-Dimensional Code Reader V530-H3 17.5 32 Handheld Reader Cable V530-W001 2000 (42.8) +100 0 100±10 (52.2) (37) 12.5 dia. 16.9 dia. Handheld 2-Dimensional Code Reader V530-H3 9 Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 10 2. Programmable Products. Seller shall not be responsible for the user's pro gramming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Seller's test conditions, and the user must corre late it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made. However, some specifica tions of the Good may be changed without any notice. When in doubt, specia part numbers may be assigned to fix or establish key specifications for you application. Please consult with your Seller's representative at any time to confirm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Handheld 2-Dimensional Code Reader V530-H3 Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC OMRON CANADA, INC. OMRON ON-LINE One Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Toronto, Ontario M1B 5V8 847-843-7900 416-286-6465 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.ca For US technical support or other inquiries: 800-556-6766 Cat. No. GC RFID4 5/04 Specifications subject to change without notice Printed in USA Handheld 2-Dimensional Code Reader V530-H3 11