Conforms to International Standards ISO/IEC 18000-3 (ISO/IEC 15693)
V680 RFID
DeviceNet ID Slave
V680-HAM42-DRT
ID Flag Sensors
V680-HAM91/HAM81
RFID with Open Network Compatibility!
V680-HAM42-DRT
Read and write up to 58 bytes.
Use the DeviceNet open network for easier,
more-flexible information management on factory sites.
The RFID System Can Be Used
Just Like a Sensor.
V680-HAM91/HAM81
Read or write 16 bits at a time with one unit.
Useful in applications from simple line sorting or
product identification to managing work progress
or inspection data.
V680 DeviceNet ID Slave
V680-HAM42-DRT
V680-series DeviceNet-compatible Slaves
for RFID Systems.
Read and Write Up To 58 Bytes.
• V680-series DeviceNet-compatible Slaves for RFID systems.
• Includes a built-in Amplifier, yet has a compact size of 65 × 65 ×
65 mm. Compatible with V680-series ID Tags and Antennas.
• Read and write 4, 26, or 58 bytes of data.
• Includes an Access Mode compatible with the V600-HAM42-DRT
to enable the use of existing programs.
• Complies with international standards, including CE, UL/CSA,
and radio wave regulations.
Radio wave regulation compliance is applicable to Japan, Europe,
the U.S.A., and Canada. Radio wave regulation compliance for
China and South Korea is pending. Approval for UL/CSA is
pending.
System Configuration
ID Tag
1-Kbyte memory
V680-D1KP52MT (8 dia.×5 mm)
For embedding in metallic
or non-metallic surface
1-Kbyte memory
V680-D1KP53M (10 dia.×4.5 mm)
For embedding in metallic or
non-metallic surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34×34×3.5 mm)
For flash mounting on metallic
or non-metallic surface
Read/Write Antenna
Host
Programmable
Controller
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof
connector
I/O
Cylinder type
V680-HS51
1-Kbyte memory
V680-D1KP66T-SP
(96×36.5×6.5 mm)
For flash mounting on
non-metallic surface
2-Kbyte memory
V680-D2KF52M (8 dia.×5 mm)
For embedding in metallic or
non-metallic surface
Amplifier
Cylinder type
V680-HS52
V680-HAM42-DRT
DeviceNet ID Slave
Programmable
Controller
Square type
V680-HS63
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40×40×4.5 mm)
For flash mounting on metallic
or non-metallic surface
I/O
V680-HS65
8-Kbyte memory
V680-D8KF67M/V680-D8KF67
(40×40×4.5 mm)
For flash mounting on metallic
or non-metallic surface
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86×54×10 mm)
For flash mounting on
non-metallic surface
Programmable
Controller
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof
connector
Note 1. Attach an Antenna to the V680-HAM42-DRT DeviceNet ID Slave to read and write V680 ID Tag data.
2. The DeviceNet ID Slave can communicate with ID Tags that comply with ISO/IEC 18000-3 (ISO/IEC 15693) in addition to V680-series ID
Tags. Communications with ID Tags other than V680-series ID Tags, however, may not be stable. Always check compatibility completely
before using other ID Tags.
3. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be
performed if a V680-HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
2
V680-HAM42-DRT, V680-HAM91/-HAM81
V680 ID Flag Sensors
V680-HAM91/-HAM81
Easy Setup! The RFID System Can Be Used Just Like
a Sensor.
Read and Write 16 Bits of Data with 1 Unit.
Useful in Applications from Simple Product Identification to Managing Work Progress
• Read or write 16 bits of data (for up to 64,000 IDs) with one Unit
despite its compact size.
• Read or write up to 128 bits by using the address shift function.
• With NPN and PNP outputs
• Equipped with a V600-HAM/HAR-compatible Access Mode, allowing
use of existing programs.
• Complies with international standards, including CE, UL/CSA, and
radio wave regulations.
Radio wave regulation compliance is applicable to Japan, Europe,
the U.S.A., and Canada. Radio wave regulation compliance for China
and South Korea is pending.
System Configuration
ID Tag
1-Kbyte memory
V680-D1KP52MT (8 dia.×5 mm)
For embedding in metallic
or non-metallic surface
1-Kbyte memory
V680-D1KP53M (10 dia.×4.5 mm)
For embedding in metallic or
non-metallic surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34×34×3.5 mm)
For flash mounting on metallic
or non-metallic surface
Read/Write Antenna
Interface Cable
Host
Programmable
Controller
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof
connector
Cylinder type
V680-HS51
1-Kbyte memory
V680-D1KP66T-SP
(96×36.5×6.5 mm)
For flash mounting on
non-metallic surface
2-Kbyte memory
V680-D2KF52M (8 dia.×5 mm)
For embedding in metallic or
non-metallic surface
Amplifier
Cylinder type
V680-HS52
V680-HAM91
(NPN output)
V680-HAM81
(PNP output)
B7A-series Link
Terminal, I/O
Terminal, etc.
V680-A60 (2 m)
V680-A60 (5 m)
V680-A60 (10 m)
Connector pins:
26 pins
Square type
V680-HS63
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40×40×4.5 mm)
For flash mounting on metallic
or non-metallic surface
Sensor Controller
V680-HS65
8-Kbyte memory
V680-D8KF67M/V680-D8KF67
(40×40×4.5 mm)
For flash mounting on metallic
or non-metallic surface
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86×54×10 mm)
For flash mounting on
non-metallic surface
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof
connector
Note 1. Attach an Antenna to the V680-HAM91/-HAM81 ID Flag Sensor to read and write V680 ID Tag data.
2. The DeviceNet ID Slave can communicate with ID Tags that comply with ISO/IEC 18000-3 (ISO/IEC 15693) in addition to V680-series ID Tags.
Communications with ID Tags other than V680-series ID Tags, however, may not be stable. Always check compatibility completely before using other ID Tags.
3. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be performed
if a V680-HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
V680-HAM42-DRT, V680-HAM91/-HAM81
3
Ordering Information
ID Tag
Type
Memory capacity
Battery-less
Appearance
1 Kbyte
2 Kbytes
Size
Metallic compatibility
For embedding in metallic or
non-metallic surface
Square
34 × 34 × 3.5 mm
For flush mounting on metallic V680-D1KP66MT
surface
V680-D1KP52MT
For flush mounting on nonmetallic surface
V680-D1KP66T
Square PFA package
95 × 36.5 × 6.5 mm
For flush mounting on nonmetallic surface
V680-D1KP66T-SP
Cylindrical,
ultra-compact
8 dia. × 5 mm
For embedding in metallic or
non-metallic surface
V680-D2KF52M
Square
40 × 40 × 4.5 mm
For flush mounting on metallic V680-D2KF67M
surface
86 × 54 × 10 mm
8 Kbytes
Model
Cylindrical, ultra-compact
8 dia. × 5 mm
For flush mounting on nonmetallic surface
V680-D2KF67
For flush mounting on nonmetallic surface
V680-D8KF68
32 Kbytes
V680-D32KF68
Read/Write Antenna (Detachable Amplifier Unit Type)
Type
Cylindrical
Appearance
Size
Cable length
M22 × 65 mm
Standard cable,
waterproof connector
2m
Flexible cable, nonwaterproof connector
Square
V680-HS52-W 12.5M
2m
V680-HS52-R 2M
12.5 m
V680-HS52-R 12.5M
M12 × 35 mm
2m
V680-HS51 2M
Standard cable,
waterproof connector
40 × 53 × 23 mm
2m
V680-HS63-W 2M
100 × 100 × 30 mm
Standard cable,
waterproof connector
Flexible cable, nonwaterproof connector
Amplifier: ID Slave for DeviceNet
Appearance
Size
Model
Amplifier: ID Flag Sensor
Appearance
Size
12.5 m
V680-HS63-W 12.5M
2m
V680-HS63-R 2M
12.5 m
V680-HS63-R 12.5M
2m
V680-HS65-W 2M
12.5 m
V680-HS65-W 12.5M
2m
V680-HS65-R 2M
12.5 m
V680-HS65-R 12.5M
Interface Cable (for V680-HAM91/81)
65 × 65 × 65 mm V680-HAM42-DRT
Type
12.5 m
Standard cable, nonwaterproof connector
Flexible cable, nonwaterproof connector
NPN output
Model
90 × 30 × 65 mm V680-HAM91
Cable length
Model
2m
V680-A60 2M
5m
V680-A60 5M
10 m
V680-A60 10M
4
Appearance
Note 1. The connectors are not water resistant.
2. The cables can be extended to a maximum length of 10 m.
3. Normally two Interface Cables are required for 1 Unit. If you do not
need to write to ID Tags, or use the address shift or noise check
functions, then one Interface Cable is sufficient.
Accessories (Order Separately)
ID Tag Attachment
Type
PNP output
Model
V680-HS52-W 2M
Appearance
Model
For the V680-D1KP66T
V600-A86
For the V680-D@KF68
V680-A81
V680-HAM81
V680-HAM42-DRT, V680-HAM91/-HAM81
Ratings and Performance
ID Tag (1-Kbyte Memory)
Item
Model
V680-D1KP52MT
Memory capacity
1,000 byte (user area)
Memory type
EEPROM
V680-D1KP66T
V680-D1KP66MT
V680-D1KP66T-SP
Data backup time (See note 1.) 10 years after writing (85°C max.)
Memory longevity
100,000 times per block (at 25°C)
Ambient operating temperature −25 to 85°C (with no icing)
(during transmission)
−25 to 70°C (with no icing)
Ambient operating temperature −40 to 125°C (with no icing)
−40 to 110°C (with no
(not during transmission)
icing)
Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, Hightemperature storage: 1,000 hours at 150°C (See note 2.)
200 thermal cycles each of 30 minutes at −10°C/180°C, Hightemperature storage: 200 hours at 180°C (See note 3.)
Ambient storage temperature
−40 to 125°C (with no icing)
Ambient operating humidity
35 to 95%
Degree of protection
IEC 60529, IP68
−40 to 110°C (with no
icing)
IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to
IP67g) (See note 4.)
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
8 dia. × 5 mm
34 × 34 × 3.5 mm
95 × 36.5 × 6.5 mm
(excluding protrusions)
Materials
Case: PPS resin
Filling: Epoxy resin
Molding: PPS resin
External resin: PFA
Tag body: PPS resin
Weight
Approx. 0.5 g
Approx. 6 g
Approx. 7.5 g
Approx. 20 g
Metallic compatibility
Yes
No
Yes
No
Note 1. Refer to the User's Manual (Cat. No. Z278 or Z279) for data backup time for temperatures of 85°C or higher. If the V680 has been stored
at 125°C or higher, write the data again even if the data does not need to be changed.
2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked
through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0)
3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through
testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0)
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
5. For details, refer to the User's Manual (Cat. No. Z278 or Z279).
ID Tag (2-Kbyte Memory)
Item
Model
V680-D2KF52M
Memory capacity
2,000 bytes (user area)
Memory type
FRAM
V680-D2KF67
V680-D1KF67M
Data backup time (See note 1.) 10 years after writing (55°C or less)
Memory longevity
10 billion times per block. Access frequency (See note 2.): 10 billion times
Ambient operating
temperature
−25 to 85°C (with no icing)
Ambient storage temperature −40 to 85°C (with no icing)
Ambient operating humidity
35 to 95%
Degree of protection
IEC 60529, IP67
35 to 85%
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
8 dia. × 5 mm
40 × 40 × 4.5 mm
Materials
Case: PPS resin
Filling: Epoxy resin
Molding: ABS resin
Filling: Epoxy resin
Weight
Approx. 0.5 g
Approx. 6.5 g
Approx. 7 g
Metallic compatibility
Yes
No
Yes
Note 1. Refer to the User's Manual (Cat. No. Z278 or Z279) for data backup time for temperatures of 55°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z278 or Z279).
V680-HAM42-DRT, V680-HAM91/-HAM81
5
ID Tag with 8-/32-Kbyte Memory
Item
Model
V680-D8KF68
V680-D32KF68
Memory capacity
8,192 bytes (user area)
32,744 bytes (user area)
Memory type
FRAM
Data backup time
(See note 1.)
10 years (at 70°C max.) after data is written
Memory longevity
10 billion times per block at 85°C max. Access frequency (See note): 10 billion times
Ambient operating
temperature
−20 to 85°C (with no icing)
Ambient storage
temperature
−40 to 85°C (with no icing)
Ambient operating
humidity
35 to 85%
Degree of protection
IEC 60529, IP67
In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 2.)
Vibration resistance
10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for
11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Dimensions
86 × 54 × 10 mm
Materials
Case: PBT resin
Filling: Epoxy resin
Weight
Approx. 50 g
Metallic compatibility
No
Note 1. Refer to the User’s Manual (Cat. No. Z278 or Z279) for data backup time for temperatures of 70°C or higher.
2. The total Read or Write communication frequency is called the access frequency.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
4. For details, refer to the User’s Manual (Cat. No. Z278 or Z279).
Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type)
Model
Item
V680-HS52-W
(Standard Cable, Waterproof
Connector)
V680-HS52-R
(Flexible Cable, Non-waterproof
Connector)
V680-HS51
(Standard Cable, Non-waterproof
Connector)
Ambient operating temperature
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC60529)
In-house standard for antenna oil
resistance (former JEM standard
equivalent to IP67g) (Read/Write
Antenna portion) (See note 1.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
10 to 2,000 Hz variable vibration,
1.5-mm double amplitude at 150 m/s2
acceleration, with 10 sweeps in X, Y,
and Z directions for 15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
1,000 m/s2 in X, Y, and Z directions
3 times each (18 times in total)
Appearance
M22 × 65 mm
M12 × 35 mm
Materials
ABS, brass, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM standard equivalent
to IP67g) (Read/Write Antenna portion) (See note 2.)
Approx. 55 g (with 2-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils.
It is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z278 or Z279).
6
V680-HAM42-DRT, V680-HAM91/-HAM81
Square Read/Write Antenna (Detachable Amplifier Unit Type)
Model
Item
V680-HS63-W
(Standard Cable, Waterproof Connector)
V680-HS63-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature
−10 to 60°C (with no icing)
Ambient storage temperature
−25 to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
40 × 53 × 23 mm
Materials
ABS, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
Model
Item
V680-HS65-W
(Standard Cable, Waterproof Connector)
IP67 (IEC60529)
In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 2.)
V680-HS65-R
(Flexible Cable, Non-waterproof Connector)
Ambient operating temperature
−25 to 70°C (with no icing)
Ambient storage temperature
−40 to 85°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
In-house standard for antenna oil resistance (former JEM In-house standard for antenna oil resistance (former JEM
standard equivalent to IP67g) (Read/Write Antenna
standard equivalent to IP67g) (Read/Write Antenna
portion) (See note 1.)
portion) (See note 2.)
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
100 × 100 × 30 mm
Materials
ABS, epoxy resin filling
Weight
Approx. 1,100 g (with 12.5-m cable)
Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils.
It is equivalent to the former JEM standard.
2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM standard.
3. For details, refer to the User’s Manual (Cat. No. Z278 or Z279).
Amplifier (DeviceNet ID Slave)
Model
V680-HAM42-DRT
Item
Connectable Antennas
One channel (V680-HS@@)
Rated voltage
24 VDC (−15% to 10%) including 10% ripple (p-p)
Power consumption
4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC)
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient operating humidity
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance
20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case
Vibration resistance
10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes
each
Shock resistance
150 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
65 × 65 × 65 mm (excluding protrusions)
Degree of protection
IEC 60529, IP20
Materials
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 150 g
Mounting
DIN Track
Note 1. For details, refer to the User's Manual (Cat. No. Z278).
2. The number of words allocated in the master depends on the Access Mode. Refer to page 9 for information on Part Names and Operating
Modes.
V680-HAM42-DRT, V680-HAM91/-HAM81
7
Amplifier: ID Flag Sensor
Model
V680-HAM91/V680-HAM81
Item
Rated voltage
24 VDC (−15% to +10%) including 10% ripple (p-p)
Power consumption
3.5 W (24 VDC, 150 mA max. except external I/O line current)
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient operating humidity
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance
20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case
Dielectric strength
1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case
Vibration resistance
10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes
each
Shock resistance
150 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
90 × 30 × 65 mm (excluding protrusions)
Degree of protection
IEC 60529, IP40
Materials
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 130 g
Mounting
DIN Track
Note 1. For details, refer to the User's Manual (Cat. No. Z278).
2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a
control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately).
I/O Specifications
V680-HAM91
Model
V680-HAM81
Item
Input specifications
Transistor output
Short-circuit current: 3 mA (TYP) (input terminal and 0-V terminal shorted)
OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC
Input impedance: 8.2 kΩ
Applied voltage: 30 VDC max.
Output specifications
NPN open-collector output
30 VDC, 20 mA max
Residual voltage: 2 V max.
PNP open-collector output
30 VDC, 20 mA max
Residual voltage: 2 V max.
I/O Circuit Diagrams
V680-HAM91
V680-HAM81
Input circuit
Output circuit
Input circuit
24 VDC
24 VDC
OUT
8.2 kΩ
IN
Tr
8
Main
circuit
24 VDC
Tr
IN
Main
circuit
8.2 kΩ
Main
circuit
Main
circuit
OUT
0V
0V
0V
Output circuit
0V
V680-HAM42-DRT, V680-HAM91/-HAM81
Part Names and Operating Modes
V680-HAM42-DRT
Part Names
OMRON
V680-HAM42-DRT
MS
T/R
7
6
5
4
2
1
4CH
0
Operation indicators
Data/Error Code Indicators (Two-color LED)
MS: ID Slave status
NS: Network status
TR: ID Tag communications status
NORMAL/ERROR: Result of communications with ID Tag
NS
NODE No
.
NORMAL/ERROR 3
MODE
NOISE
X10 1
SOURCE : 24VDC 0.2A
Node Address Switches
OMRON Corporation
X10 0
32CH
TEST
SYNC1
AUTO2
SYNC2
OFF
AUTO1
FSM
Data (green)
Error code (red)
16CH
Mode Switch
Sets the operating mode of the ID Slave.
(Refer to the following table.)
RFID
MADE IN JAPAN
Node address switches (setting range: 00 to 63)
Power Supply Terminals
Connect to 24-VDC power.
Recommended Power Supply: S8VS-03024
(Manufactured by OMRON)
Enclosed connector model:
FKC2.5/3-ST-5.08-RF (Phoenix Contact)
DeviceNet Connector
Connects to DeviceNet Master Unit.
Enclosed connector model:
FKC2.5/5-ST-5.08-RFAUM (Phoenix Contact)
Antenna Connector
Connects to a V680-series Antenna (V680-HS@)
Operating Modes
Mode Symbol
Description
Maximum number of
Words allocated in Master Unit
bytes accessible in ID Tag
0
4CH
4-byte Access Mode
Read: 4 bytes
Write: 4 bytes
IN: 4 words
OUT: 4 words
(PLC inputs: 64 points,
PLC outputs: 64 points)
1
16CH
26-byte Access Mode
Read: 26 bytes
Write: 26 bytes
IN: 16 words
OUT: 16 words
(PLC inputs: 256 points,
PLC outputs: 256 points)
2
32CH
58-byte Access Mode
Read: 58 bytes
Write: 58 bytes
IN: 32 words
OUT: 32 words
(PLC inputs: 512 points,
PLC outputs: 512 points)
3
SYNC1
V600-compatible Trigger Mode, 100-ms output time
4
SYNC2
V600-compatible Trigger Mode, 500-ms output time
Read: 3 bytes
Write: 2 bytes
IN: 2 words
OUT: 2 words
5
AUTO1
V600-compatible Auto Mode, 100-ms output time
6
AUTO2
V600-compatible Auto Mode, 500-ms output time
7
TEST
ID Tag Communications Test Mode (Checks standalone op- --eration of ID Slave.)
8
NOISE
Noise Measurement Mode (Measures the noise around the
Antenna.)
9
---
Setting prohibited
---
Note 1. The V600-compatible Trigger and Auto Modes can be used with the same I/O settings and control methods that are used with the V600HAM42-DRT.
2. Communications with the host device will be offline while the Communications Test Mode or Noise Measurement Mode is being used.
Commands (4-byte, 26-byte, 58-byte Access Mode)
Reading
READ
Data in the ID Tag memory is read by specifying the memory address and the number of bytes to process.
(The number of bytes can be specified using the Access Mode.)
Writing
WRITE
Data is written to the ID Tag by specifying the memory address, number of bytes to process, and the data.
(The number of bytes can be specified using the Access Mode.)
BIT SET
Previously specified bits (i.e., bits that are turned ON) are turned ON in the ID Tag address specified for BIT SET.
BIT CLEAR Previously specified bits (i.e., bits that are turned ON) are turned OFF in the ID Tag address specified for BIT CLEAR.
DATA FILL The specified continuous memory addresses in the ID Tag are filled with the same data.
V680-HAM42-DRT, V680-HAM91/-HAM81
9
V680-HAM91/-HAM81
Parts Names
I/O connector CN2
Connects to a PLC or other host using an Interface Cable (V680-A60).
This connector is not required if data will not be written to ID Tags or the address
shift function and noise check function will not be used.
I/O connector CN1
Connects to a PLC or other host using an Interface Cable (V680-A60).
Indicators
Indicates the ID Flag Sensor status and ID Tag communications status.
Mode Setting Switches
Access Address Mode Setting Switch
Sets the memory address in the ID Tag that
will be accessed.
Access Mode Setting
Sets the operating mode (SYNC or AUTO) for communications with the ID Tag,
and sets the Noise Measurement Mode. (Refer to the following table.)
Output Mode Setting
Sets the Output Mode (10-ms, 50-ms, or 500-ms OFF-delay), and output
time setting (10-ms, 50-ms, 500-ms, or Continuous output).
Read Mode Setting
Sets the mode for reading from an ID Tag DATA READ, VERIFY,
or Wire-saving Mode.
Write Mode Setting
Sets the mode used when writing
(16-bit write/8-bit write, BIT SET/BIT CLEAR).
Antenna Connector
Connects to a V680-series Antenna (V680-HS@).
Main Functions
Reading
Data Read
Reads 16 bits of data from the set address in the ID Tag and outputs the data to the data output lines.
Verify
Compares the code set in advance with the code read from the ID Tag and outputs the match/mismatch
result.
Wire-saving Mode The wire-saving mode enables reading and writing 16-bit data using one 16-point Input Unit for a PLC
or other host device.
Writing
Data Write
Writes the data specified in the data input lines. (The user can select to batch-write 16 bits or 8 bits.)
Bit Set
Sets specified bits.
Bit Clear
Clears specifies bits.
Other Functions
Address Shift
When reading or writing more than 16 bits (2 bytes), an address shift can be specified to enable reading or writing up to
128 bits (16 addresses). The address shift can be set from the host, eliminating the need to change the address set on the
front panel.
Noise Check
Measures the noise around the Antenna.
Write Protection
Prevents data stored in the ID Tag from being overwritten.
Operating Modes
Mode
Standard modes
V600-HAR91/81 and
HAM91/81-compatible
modes
V600-HAR92-compatible
modes
AUTO MODE 1
TRIGGER MODE 1
AUTO MODE 2
TRIGGER MODE 2
AUTO MODE 3
TRIGGER MODE 3
Function
Reading
Writing
16 bits
●
(●) (See note 1.)
Verification Check
●
●
Wire-saving Mode (See note 2.)
●
8 bits (1 byte)
●
●
16 bits (2 bytes)
●
●
Individual bits (BIT SET or BIT CLEAR) ●
●
Parity check output (See note 3.)
●
Noise check function
●
Address shift function
●
●
●
●
Note 1. If an error occurs, the error code will not be output to the data output lines (OD0 to OD15).
2. If an error occurs, the data output lines will all turn ON.
3. The parity is also output when the error code is output.
4. The V600-compatible modes are for compatibility with the previous V600 Series. Not all functions are supported in these modes.
10
V680-HAM42-DRT, V680-HAM91/-HAM81
■ Performance Specifications
ID Tag (1-kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D1KP52MT
Function
Read/Write Antenna
V680-HS51
Transmission distance
(unit: mm)
Read
distance
0.5 to 6.5 mm
(axial deviation ±2)
Write
distance
0.5 to 6.0 mm
(axial deviation ±2)
ID Tag and Read/Write Antenna mounting
conditions
V680-D1KP52MT
Non-metallic
(Resin, plastic, wood, etc.)
V680HS51
Metallic
V680-HS52
Read
distance
0.5 to 9.0 mm
(axial deviation ±2)
Write
distance
0.5 to 8.5 mm
(axial deviation ±2)
V680-D1KP52MT
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-D1KP52MT
(embedded in metallic
surface: steel)
V680-HS51
Read
distance
Write
distance
0.5 to 3.5 mm
(axial deviation ±2)
0.5 to 3.0 mm
(axial deviation ±2)
Metallic
V680HS51
Metallic
V680-D1KP52MT
V680-HS52
Read
distance
0.5 to 4.5 mm
(axial deviation ±2)
Metallic
V680-HS52
Write
distance
0.5 to 4.0 mm
(axial deviation ±2)
Non-metallic
V680-D1KP52MT
V680-HS63
Read
distance
0.5 to 12.0 mm
(axial deviation ±2)
Write
distance
0.5 to 9.5 mm
(axial deviation ±2)
V680-D1KP52MT
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP52MT
Non-metallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the
User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
V680-HAM42-DRT, V680-HAM91/-HAM81
11
Recommended combination
ID Tag
V680-D1KP66T
Function
Read/Write Antenna
V680-HS52
Transmission distance
(unit: mm)
Read
distance
1.0 to 17.0 mm
(axial deviation ±2)
(See note 2.)
Write
distance
1.0 to 17.0 mm
(axial deviation ±2)
(See note 2.)
ID Tag and Read/Write Antenna mounting
conditions
V680-D1KP66T
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-HS63
Read
distance
5.0 to 30.0 mm
(axial deviation ±10)
(See note 2.)
Write
distance
5.0 to 25.0 mm
(axial deviation ±10)
(See note 2.)
Read
distance
5.0 to 47.0 mm
(axial deviation ±10)
(See note 2.)
Write
distance
5.0 to 42.0 mm
(axial deviation ±10)
(See note 2.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP66T
Non-metallic
V680-HS65
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680D1KP66T
Metallic
V680-D1KP66MT
(flush-mounted on
metallic surface: steel)
V680-HS52
Read
distance
1.0 to 16.0 mm
(axial deviation ±2)
Write
distance
1.0 to 14.0 mm
(axial deviation ±2)
Read
distance
5.0 to 25.0 mm
(axial deviation ±10)
Write
distance
5.0 to 20.0 mm
(axial deviation ±10)
Read
distance
5.0 to 25.0 mm
(axial deviation ±10)
V680-D1KP66MT
V680-HS52
Non-metallic
V680-HS63
Metallic
V680-HS63
Metallic
V680D1KP66MT
Non-metallic
V680-HS65
Write
distance
V680-HS65
Metallic
5.0 to 20.0 mm
(axial deviation ±10)
Metallic
12
V680-HAM42-DRT, V680-HAM91/-HAM81
V680D1KP66MT
Recommended combination
ID Tag
V680-D1KP66T-SP
Function
Read/Write Antenna
V680-HS52
Read
distance
Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
1.0 to 15.0 mm
(axial deviation ±2)
V680-D1KP66T-SP
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
V680HS52
1.0 to 15.0 mm
(axial deviation ±2)
Non-metallic
V680-HS63
Read
distance
5.0 to 25.0 mm
(axial deviation ±10)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
5.0 to 20.0 mm
(axial deviation ±10)
V680D1KP66T-SP
Non-metallic
V680-HS65
Read
distance
5.0 to 42.0 mm
(axial deviation ±10)
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
5.0 to 37.0 mm
(axial deviation ±10)
V680D1KP66T-SP
Metallic
Note 1. When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
2. Refer to the User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
V680-HAM42-DRT, V680-HAM91/-HAM81
13
ID Tag (2-kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D2KF52M
Function
Read/Write Antenna
V680-HS51
Read
distance
Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
0.5 to 5.5 mm
(axial deviation ±2)
V680-D2KF52M
Non-metallic
(Resin, plastic, wood, etc.)
Write
distance
0.5 to 5.5 mm
(axial deviation ±2)
Read
distance
0.5 to 8.0 mm
(axial deviation ±2)
Write
distance
0.5 to 8.0 mm
(axial deviation ±2)
V680HS51
Metallic
V680-HS52
V680-D2KF52M
V680-HS52
Non-metallic
(Resin, plastic, wood, etc.)
Non-metallic
V680-D2KF52M
(embedded in metallic
surface: steel)
V680-HS51
Read
distance
0.5 to 3.5 mm
(axial deviation ±2)
Metallic
V680HS51
Write
distance
0.5 to 3.5 mm
(axial deviation ±2)
Metallic
V680-D2KF52M
V680-HS52
Read
distance
0.5 to 3.0 mm
(axial deviation ±2)
Write
distance
0.5 to 3.0 mm
(axial deviation ±2)
Metallic
V680-HS52
Non-metallic
V680-D2KF52M
V680-HS63
Read
distance
0.5 to 9.5 mm
(axial deviation ±2)
Write
distance
0.5 to 9.5 mm
(axial deviation ±2)
Read
distance
1.0 to 17.0 mm
(axial deviation ±2)
(See note.)
Write
distance
1.0 to 17.0 mm
(axial deviation ±2)
(See note.)
V680-D2KF52M
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF52M
Non-metallic
V680-D2KF67
V680-HS52
V680-D2KF67
V680-HS52
V680-HS63
Read
distance
7.0 to 30.0 mm
(axial deviation ±10)
(See note.)
Write
distance
7.0 to 30.0 mm
(axial deviation ±10)
(See note.)
Read
distance
5.0 to 42.0 mm
(axial deviation ±10)
(See note.)
Write
distance
5.0 to 42.0 mm
(axial deviation ±10)
(See note.)
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF67
Non-metallic
V680-HS65
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
V680D2KF67
Metallic
14
V680-HAM42-DRT, V680-HAM91/-HAM81
Recommended combination
ID Tag
Function
Read/Write Antenna
V680-D2KF67M (flush- V680-HS52
mounted on metallic
surface: steel)
Read
distance
Transmission distance
(unit: mm)
ID Tag and Read/Write Antenna mounting
conditions
1.0 to 16.0 mm
(axial deviation ±2)
Write
distance
1.0 to 16.0 mm
(axial deviation ±2)
Read
distance
6.0 to 25.0 mm
(axial deviation ±10)
Write
distance
6.0 to 25.0 mm
(axial deviation ±10)
Read
distance
5.0 to 25.0 mm
(axial deviation ±10)
Write
distance
5.0 to 25.0 mm
(axial deviation ±10)
V680-D2KF67M
Metallic
V680-HS52
Non-metallic
V680-HS63
Iron
V680-HS63
Metallic
V680D2KF67M
Non-metallic
V680-HS65
V680-HS65
Metallic
V680D2KF67M
Metallic
ID Tag (8-/32-Kbyte Memory) Transmission
Recommended combination
ID Tag
V680-D8KF68/
-D32KF68
Function
Read/Write Antenna
V680-HS63
Transmission distance
(unit: mm)
Read
distance
5.0 to 45.0 mm
(axial deviation ±10)
(See note.)
Write
distance
5.0 to 45.0 mm
(axial deviation ±10)
(See note.)
Read
distance
5.0 to 75.0 mm
(axial deviation ±10)
(See note.)
ID Tag and Read/Write Antenna mounting
conditions
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680D@KF68
Metallic
V680-HS65
Write
distance
V680-HS65
Non-metallic
(Resin, plastic, wood, etc.)
5.0 to 75.0 mm
(axial deviation ±10)
(See note.)
V680D@KF68
Metallic
V680-D8KF68/
V680-HS63
-D32KF68
(Special attachment
provided; flush-mounted
on metallic surface:
steel)
Read
distance
5.0 to 35.0 mm
(axial deviation ±10)
Write
distance
5.0 to 35.0 mm
(axial deviation ±10)
V680-HS63
Metallic
Metallic
V680-HS65
V680-A81
(ID Tag Attachment)
Read
distance
5.0 to 55.0 mm
(axial deviation ±10)
V680-HS65
V680D@KF68
V680-A81
(ID Tag Attachment)
Metallic
Write
distance
5.0 to 55.0 mm
(axial deviation ±10)
Metallic
V680D@KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z248 or Z262).
Note: The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the User's
Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details.
V680-HAM42-DRT, V680-HAM91/-HAM81
15
Characteristic Data (Typical)
Transmission Range
(unit: mm)
1-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 11 to 13 for communications distance specifications.
The communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Write
Read
Y
Y
50
40
X
30
−40
−30
−20
20
10
10
0
10
20
30
40
X
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT
−50
−40
−30
−20
−10
X
20
20
10
10
0
10
20
30
40
X
−50
−40
−30
−20
−10
20
20
10
10
0
10
20
30
40
−50
X
−40
−30
−20
−10
0
20
30
40
Read
Write
Y
X
Write
100
80
60
X
30
20
40
10
20
0
10
V680-HS65 (mounted on metallic material) &
V680-D1KP66T
40
16
Write
Y
50
−10
X
X
30
X
Read
−20
40
40
Y
−30
30
Y
50
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T
−40
20
Read
Y
30
−50
10
Write
40
−10
0
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T
Y
50
−20
X
30
Read
−30
Write
40
Y
−40
X
50
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT
−50
40
Y
Y
30
−10
30
Read
40
−20
20
Y
50
−30
10
Write
Read
−40
0
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Y
−50
X
30
20
−10
Y
50
40
−50
Write
Read
Y
10
20
30
40
X
−100
−80
V680-HAM42-DRT, V680-HAM91/-HAM81
−60
−40
−20
0
20
40
60
80
X
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP
Write
Read
Y
50
Y
50
Y
40
40
X
−50
−40
−30
−20
X
30
30
20
20
10
10
−10
0
10
20
30
40
X
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP
−50
−40
−30
−20
−10
−60
−40
20
30
40
X
Write
Read
Y
100
50
80
40
60
30
40
20
20
10
−20
10
Write
Read
−80
0
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel)
Y
−100
Write
Read
Y
0
20
40
60
80
X
−50
−40
−30
−20
−10
Y
X
0
10
20
30
40
X
V680-HS63 (mounted on non-metallic material) &
V680-HS65 (mounted on metallic material) &
V680-D1KP66MT (flush-mounted on metallic surface: steel) V680-D1K66MT (flush-mounted on metallic surface: steel)
Read
Write
Read
Y
50
100
80
40
X
30
−50
−40
−30
−20
−10
Write
Y
Y
60
20
40
10
20
0
10
20
30
40
X
−100
−80
−60
−40
−20
0
20
40
60
V680-HAM42-DRT, V680-HAM91/-HAM81
80
X
17
2-kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 14 to 15 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Write
Read
Y
60
60
Y
50
−50
−40
−30
−20
40
X
30
30
20
20
10
10
−10
0
10
20
30
40
50
60
X
−70 −60
−50
−40
−30
−20
−10
Y
30
40
30
X
20
20
10
10
0
10
20
30
40
X
−50
−40
−30
−20
−10
0
10
20
30
X
Write
Read
60
Y
50
Y
50
40
40
X
X
30
30
20
20
10
10
−10
40
Y
60
−20
Write
X
Write
Read
−30
X
V680-HS52 (embedded in metallic material) &
V680-D2KF67
Y
−40
60
40
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M
−70 −60 −50
50
Y
50
30
−10
20
Read
40
−20
10
Y
50
−30
0
Write
Read
Y
−40
X
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
V680-HS51 (embedded in metallic material) &
V680-D2KF52M
−50
Y
50
40
−70 −60
Write
Read
Y
0
10
20
30
40
50
60
X
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67
−70 −60
−50
−40
−30
−20
−10
10
20
30
40
50
60
X
Write
Read
Write
Read
Y
90
Y
Y
60
0
V680-HS65 (mounted on metallic material) &
V680-D2KF67
80
70
50
60
40
X
50
30
40
20
30
10
10
20
−70 −60
18
−50
−40
−30
−20
−10
0
10
20
30
40
50
60
X
−100
−80
V680-HAM42-DRT, V680-HAM91/-HAM81
−60
−40
−20
0
20
40
60
80
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
V680-HS63 (mounted on non-metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Write
Read
Y
60
50
40
−50
−40
−30
−20
−10
Y
60
Y
50
−70 −60
Write
Read
Y
40
X
30
30
20
20
10
10
0
10
20
30
40
50
60
X
−70 −60
−50
−40
−30
−20
−10
X
0
10
20
30
40
50
60
X
V680-HS65 (mounted on metallic material) &
V680-D2KF67M (flush-mounted on metallic surface: steel)
Read
Write
Y
90
80
70
60
50
40
30
20
10
−100
−80
−60
−40
−20
0
20
40
60
80
X
V680-HAM42-DRT, V680-HAM91/-HAM81
19
8-/32-Kbyte Memory ID Tag
The values given for communications ranges are reference values. Refer to pages 15 for communications distance specifications. The
communications distance will depend on the ID Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
Write
Read
Y
70
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
60
50
X
40
40
30
30
20
20
10
10
0
10
20
30
40
50
60
70
X
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68
Flush-mounted on metallic surface: steel (Horizontalfacing ID Tag) When the V680-A81 ID Tag Attachment is
mounted.
−80 −70 −60 −50
−40 −30 −20 −10
−20
30
30
20
20
10
10
0
10
20
30
40
50
60
70
X
20
−40
−20
0
70
X
Write
−30 −20 −10
20
40
60
80
60
80
20
30
40
100
120 X
70
X
Write
−120 −100
−80
−60
−40
−20
0
X
20
40
60
80
100
120 X
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Vertical-facing ID Tag) When the
V680-A81 ID Tag Attachment is mounted.
Read
Y
110
100
90
80
70
60
50
40
30
20
10
120 X
60
Y
Write
100
50
Read
X
40
10
Y
110
100
90
80
70
60
50
40
30
20
10
Y
20
0
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Vertical-facing ID Tag)
X
Read
−60
−80 −70 −60 −50 −40
Y
Y
110
100
90
80
70
60
50
40
30
20
10
−80
60
Y
Write
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 Flush-mounted on metallic
surface: steel (Horizontal-facing ID Tag) When the
V680-A81 ID Tag Attachment is mounted.
−120 −100
50
X
40
0
40
50
X
40
Read
−40
30
60
Y
110
100
90
80
70
60
50
40
30
20
10
−60
20
Read
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag)
−80
10
Y
70
Y
50
−120 −100
0
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68
Flush-mounted on metallic surface: steel (Vertical-facing
ID Tag) When the V680-A81 ID Tag Attachment is mounted.
60
−40 −30 −20 −10
X
Write
Read
Y
70
−80 −70 −60 −50
Y
60
50
−80 −70 −60 −50 −40 −30 −20 −10
Write
Read
Y
70
Y
−120 −100
−80
V680-HAM42-DRT, V680-HAM91/-HAM81
−60
−40
−20
0
Write
Y
X
20
40
60
80
100
120 X
Processing Times (for reference purposes only)
Communications times between the Antenna and ID Tag, plus the processing time for the Amplifier.
V680-HAM42-DRT (DeviceNet ID Slave)
1-Kb Memory Tag
V680-D1KP@ (V680-HS@@ Antenna)
Communications
speed setting
Normal mode
Command
Communications time (ms)
4-byte Access Mode 26-byte Access Mode 58-byte Access Mode
Read
67
Write (with verification) 105
High-speed mode
95
137
67
143
210
105
Data Fill
17.5 × number of processed blocks + 89.2
Read
63
Write (with verification) 89
Data Fill
V600-compatible
Mode
---
85
117
---
128
186
---
14.8 × number of processed blocks + 71.7
---
2-Kb Memory Tag
V680-D2KF@ (V680-HS@@ Antenna)
Communications
speed setting
Normal mode
Command
Communications time (ms)
4-byte Access Mode 26-byte Access Mode 58-byte Access Mode
Read
65
Write (with verification) 105
High-speed mode
92
130
65
142
219
105
Data Fill
17.5 × number of processed blocks + 89.2
Read
61
Write (with verification) 86
Data Fill
V600-compatible
Mode
---
81
110
---
124
178
---
14.8 × number of processed blocks + 71.7
---
8 and 32-Kb Memory Tag
V680-D8KF68, V680-D32KF68 (V680-HS@@ Antenna)
Communications
speed setting
Normal mode
Command
Communications time (ms)
4-byte Access Mode 26-byte Access Mode 58-byte Access Mode
Read
66
Write (with verification) 96
High-speed mode
94
136
66
131
182
96
Data Fill
17.5 × number of processed blocks + 89.2
Read
59
Write (with verification) 76
Data Fill
V600-compatible
Mode
---
76
102
---
100
135
---
14.8 × number of processed blocks + 71.7
---
V680-HAM42-DRT, V680-HAM91/-HAM81
21
V680-HAM91/-HAM81 (ID Flag Sensor)
Model
V680-HAM91/V680-HAM81
Function (Mode)
Read
Write
Data Read
Verify Read
Write
BIT SET
BIT CLEAR
1-Kb, 2-Kb Memory Tag
43 ms
87 ms
8-Kb, 32-Kb Memory Tag
50 ms
84 ms
Communications
range
ID Tag travel speed (i.e., conveyor speed) =
Travel distance (D) in
communications area
Communications time (T)
Direction
of travel
Calculation Example:
In this example, the V680-D1KP66T and V680-HS63 are combined and read together.
Y
50
40
30
20
10
−30
−20
−10
0
50 mm
ID Tag travel speed (m/min.) =
50 (mm)
43 (ms)
20
40
X
(Unit: mm)
69 (m/min)
Note 1. The travel speed depends on communications distance Y and axis offset. It is recommended to refer to the communications area diagram
and use the part with the widest area.
2. These values are guidelines. Perform testing with the actual device before operation.
3. Processing for communications errors is not included in this formula.
22
V680-HAM42-DRT, V680-HAM91/-HAM81
Safety Precautions
Installation
WARNING
Do not use this product as a detection device to protect
people.
Note: This catalog is intended only to help select the appropriate
product. Be sure to read the User's Manual for usage
precautions prior to using the product.
Precautions for Safe Use
To ensure safety, be sure to follow the following precautions:
1. Do not operate this product in any flammable, explosive, or corrosive gas environment.
2. Do not disassemble, repair, or remodel this product.
3. If any cable has a locking mechanism, be sure to check that it has
been locked before using it.
4. The DC power supply must be within the specified rating (24 VDC
+10%/−15%).
5. Do not reverse the power supply connection.
6. Do not insert water, wire, etc., into any of the gaps in the case.
Doing so may cause fire or electric shock.
7. Make sure that the Unit is provided with sufficient ventilation
space.
8. Do not install the Products near any equipment that generates a
large amount of heat (such as heaters, transformers, and largecapacity resistors).
9. Turn OFF the Controller or ID Sensor Unit power before attaching
or removing the Read/Write Antenna.
10.In the event that the product exhibits any abnormal condition,
immediately stop using the system, turn OFF the power, and contact your OMRON sales representative.
11.Dispose of this product as industrial waste.
12.Do not clean the Products with paint thinner, benzene, acetone,
or kerosene.
13.If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference.
Refer to the User's Manual (Cat. No. Z278 or Z279) and check to
make sure there is no mutual interference between the Antennas.
14.To remove the Unit, catch a tool on the hook and gently remove
the Unit.
15.Do not perform wiring incorrectly or short-circuit the load. Doing
so may result in rupture or damage from burning.
16.Do not use the product in environments subject to oil.
17.Do not use the product with an AC power supply.
Precautions for Correct Use
• The product uses the 13.56-MHz frequency band to communicate
with ID Tags. Some devices, such as some motors, inverters, and
switching power supplies, generate electromagnetic waves (i.e.,
noise) that can affect communications with ID Tags. If any of these
devices are nearby, communications with ID Tags may be affected
or ID Tags may be destroyed. If the product is to be used near such
devices, check the effects on communications before using the
product.
• To minimize the general influence of noise, observe the following
precautions:
1. Ground any metallic material located around this device to
100 Ω or less.
2. Keep the product away from high voltage and heavy current.
• Always bundle the cables connected to the power supply terminals
and the ground terminal and connect the enclosed ferrite core
(ZCAT2032-0930 manufactured by TDK) (V680-HAM42-DRT
only).
• Do not pull on the cables with excessive strength.
• Do not use products that are not waterproof in misty environments.
• Do not subject the products to chemicals that adversely affect
product materials.
• When installing the product, tighten screws to the following torque:
V680-HS51 Read/Write Antenna: 6 N·m
V680-HS52 Read/Write Antenna: 40 N·m
V680-HS63 Read/Write Antenna: 1.2 N·m
V680-HS65 Read/Write Antenna: 0.7 to 1.2 N·m
• When Read/Write Antennas are mounted side-by-side, mutual
interference may reduce the transmission performance. Refer to
the RFID System Amplifier and Antennas/ID Tags User's Manual to
mount them in a way that will prevent mutual interference.
Host Communications (V680-HAM91/-HAM81)
When the Product is started, unstable signals may be output from
the host interface.
Begin performing controls with the Product only after it has been
started for at least 1 second.
Storage
Store the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient storage temperature is within the range stipulated in
the specifications.
• There are no sudden variations in temperature (no condensation).
Please observe the following precautions to prevent failure to
operate, malfunctions, or undesirable effects on product
performance.
Installation Site
• The ambient storage humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Install the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
Cleaning
• The ambient operating temperature is within the range stipulated in
the specifications.
Do not use thinner, benzene, acetone, or kerosene for cleaning.
Using these substances may dissolve the resin material and the
case.
• There are no sudden variations in temperature (no condensation).
• The ambient operating humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
V680-HAM42-DRT, V680-HAM91/-HAM81
23
Dimensions
Note: All units are in millimeters unless otherwise indicated.
ID Tag
V680-D1KP52MT/-D2KF52M
V680-D1KP66T/-D1KP66MT
R0.2
0
8 −0.1
dia.
Four, R4
34
Mounting Hole Dimensions
25 ±0.2
Four, R3
Two, M3
Two,
25 ±0.2
3.5 dia.
25 ±0.2
32
0
5 −0.1
Filling
25 ±0.2
3.5 ±0.1
Two,
6 dia.
32
34
Case material PPS resin
Case material PPS resin
Epoxy resin
V680-D2KF67/-D2KF67M
V680-D1KP66T-SP
Mounting Hole Dimensions
Two, M3
Four, R6
36.5
34
5.2 8
Two, 5.5 dia.
(mounting holes)
Mounting Hole Dimensions
16
Two, M5
40 +0.1
−0.5
8
80±0.2
Two, 3.5-dia.
mounting holes
Case material PFA resin
1.3
16
16
40 +0.1
−0.5
13.2
2
4.5
Filling
Two, 4.5 dia. mounting holes
10
Epoxy resin
0.2
8
V680-D8KF68/-D32KF68
32 ±0.2
Case material ABS resin
8
5.2
80±0.2
95
2.5 max.
32 ±0.2
Mounting reference
surface
16
34
6.5
13.2
Mounting Hole Dimensions
10
54
44
44±0.2
Two, M4
76±0.2
86
76
Case material PBT resin
Filling
10
Epoxy resin
5
Read/Write Antenna with Detachable Amplifier Unit
V680-HS52-W
Two toothed washers
Two mounting nuts
Operation indicator
M22 × 1
35 dia.
30
Insulated cover
37
50
19.8 dia.
14.5 dia.
16.5 dia.
7
30
47.6
50
57
65
Mounting Hole Dimensions
22.5 dia.
V680-HS52-R
Ferrite core
Two toothed washers
Two mounting nuts
Operation indicator
M22 × 1
50
30
35 dia.
Connector
16.5 dia.
5.5-dia. coaxial cable
20
47.6
50
57
65
30
Mounting Hole Dimensions
22.5 dia.
V680-HS51
M12 × 1
Toothed washer
Two mounting nuts
12
21 dia.
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
Ferrite core
12.5 dia.
24
PVC
Connector
Case material
Brass
Transmission surface
PBT resin
Filling
Epoxy resin
Cable
PVC
Connector
(14.5 dia.) (16.8 dia.)
25
7
Mounting Hole Dimensions
Epoxy resin
Cable
26.2
9.6 dia.
17
PBT resin
Filling
10
14.5 dia.
16.5 dia.
Brass
Transmission surface
Insulated cover
19.8 dia.
7
Case material
50
Insulated cover
24
33
35
Coaxial cable, 2.9 dia., Standard length: 2 m
15
V680-HAM42-DRT, V680-HAM91/-HAM81
Case material
Brass
Transmission surface
ABS resin
Filling
Epoxy resin
Cable
PVC
V680-HS63-W
Insulated cover
30
40
50
37
28±0.1
14.5 dia.
5
16.5 dia.
5.5-dia. coaxial cable
16.5 dia.
6
27
5
Connector
Ferrite core
53
Operation indicator
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
Center of coil
11
V680-HS63-R
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Insulated cover
30
20
50
10
40
28±0.1
14.5 dia.
5
16.5 dia.
5.3-dia. coaxial cable
Ferrite core
16.5 dia.
6
27
5
53
Connector
Operation indicator
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
Center of coil
11
V680-HS65-W
100
90±0.2
5
Four, 4.5-dia.
(Mounting holes)
50
5
Ferrite core
Connector
50
Operation
indicator
25
37
16.5 dia.
100
90±0.2
14.5 dia. 16.8 dia.
Bushing
50
30
5.5-dia. coaxial cable
10
Insulated cover
10
14
30
20
V680-HS65-R
ABS resin
Filling
Epoxy resin
Cable
PVC (gray)
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC (black)
Case material
PC+ABS resin
11
5
50
5
100
90±0.2
Four, 4.5-dia.
(Mounting holes)
Ferrite core
Connector
(39.5)
50
Operation
indicator
Case material
25
16.5 dia.
100
14.5 dia. 16.8 dia.
90±0.2
Bushing
30
10
50
Insulated cover
5.3-dia. coaxial cable
10
14
30
20
11
Amplifier: DeviceNet ID Slave
V680-HAM42-DRT
Operation
indicators
65
20
10
5
5
5
Data indicators
22.6
1.5
35.2
65
4 16
Mode switch
Node address
switches
12 6
20.5
DeviceNet Connector
18
21.5
5.06
12
(3.7)
Antenna connector
Power supply terminals
65
35
4 1 .8
25 .8
V680-HAM42-DRT, V680-HAM91/-HAM81
25
Amplifier: ID Flag Sensor
V680-HAM91/-HAM81
74. 8
71. 8
65. 75
61.7 5
4 switches
8 .7
30
1 4 .7 4
4 switches
18. 95
21 operation indicators
7 x 2 .1 = 1 4 .7
38. 5
30. 25
41. 55
52. 85
108.26
90
Connector
Connector
65
12
Case material
PC+ABS resin
(5.5)
Interface Cable (Order Separately)
V680-A60 2M/5M/10M
Connector: XG5M-2632-N
320
20±5
+50
L1 0
20±5
20±5
35±5
20±5
14.4
1
6.1
3 7 .6
9-dia. (0.2-dia per 7 conductors)
vinyl-insulated round cable with 23 conductors
Note: The connectors are not water resistant.
Model
Length L1 (mm)
V680-A60 2M
2,000 mm
V680-A60 5M
5,000 mm
V680-A60 10M
10,000 mm
Accessory
V680-D1KP66T Attachments
Mounting Hole Dimensions
Four, R5.5
25±0.2
Two, 4-dia.
Two, M3
V600-A86 Holder
37 34
15
25±0.2
15
34
37
16
25 ±0.2
25 ±0.2
4
3.5
Case material
10
PPS resin
V680-D8KF68/-D32KF68 Attachments
Mounting holes
Two, 4.5-dia.
V600-A81 Holder
Mounting Hole Dimensions
54
44
44±0.2
Two, M4
76±0.2
86
10
26
V680-HAM42-DRT, V680-HAM91/-HAM81
76
Case material
PBT resin
Filling
Epoxy resin
V680-HAM42-DRT, V680-HAM91/-HAM81
27
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by
OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR
PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS
WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY
CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’S ANALYSIS
CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE,
OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND
SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated
products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer’s application or use of the
product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by
itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is
it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS
BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s
test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of
the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request.
Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading
errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner,
for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2009 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. Q160-E1-01A
0308 (0308) (C)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
V680-D1KP52MT
工商网监
湘ICP备2023018690号
