WE70-AP-US

New Product News FA Wireless LAN Unit WE70 Reliable Wireless Ethernet for Harsh FA Environments Conforms to IEEE 802.11a/b/g Construct an Ideal Wireless LAN System for FA Applications! The FA Wireless LAN Unit manages FA sites with 3 solutions Wireless LAN systems conforming to global standards. Conforms to IEEE 802.11a/b/g (5 GHz/2.4 GHz)! Nominal 54 Mbit/s high-speed communications! The WE70 Wireless Unit supports ● General features of Wireless LAN standards three Wireless LAN standards. Standards The appropriate standard can be Maximum speed 54 Mbit/s 11 Mbit/s 54 Mbit/s selected according to the environment Frequency band 5-GHz band 2.4 GHz band 2.4 GHz band or use of the FA system. Modulation Characteristics IEEE 802.11a OFDM • Five times faster than 11b. • Noise resistant. • Less cross talk with other devices. • Multiple 8 channels can be used simultaneously. Conformance to Radio Wave Standards Conforms to radio wave standards for USA, Europe, and China. USA: FCC part 15.247, 401-407 Europe: EN 300 328, EN 301 893 China: SRCC 2 IEEE802.11b DS-SS • Wide selection of products. • Long communications distance. • Can be used outdoors. IEEE 802.11g OFDM • Five times faster than 11b. • Less vulnerable to obstacles. • Compatible with 11b. • Can be used outdoors Secure and easy to implement at FA sites. Stable operation even in harsh FA environments! Signal status can be observed! The Wireless LAN Unit has the same level of noise and environmental resistance as OMRON FA Devices, such as PLCs and Power Supply Units. It is capable of stable operation when installed within the same control panel as other FA devices. There is no need to reset the power supply even if the Wireless LAN Unit runs out of control because it will automatically restart itself. With the popular Received Signal Strength Indicator (RSSI), the status of invisible radio waves can be easily identified by checking the indicators. ● Received Signal Strength Level Good noise resistance can be obtained by connecting the Wireless Unit to an OMRON Power Supply Unit. POWER RSSI LAN WIRELESS POWER RSSI LAN WIRELESS POWER RSSI LAN WIRELESS POWER RSSI LAN WIRELESS Stable Usable Unstable Unable to establish communications Versatile and easy installation! OMRON'S original security system prevents important production information from being disclosed. This Wireless LAN Unit can be easily installed anywhere on a DIN Rail or a wall. Install it in the control panel with other FA devices! Use magnets to mount it on metal surfaces! The latest encryption technology combined with OMRON'S original encryption technology forms a strong security environment. The FA Wireless LAN contains the following security features. ● Type of FA Wireless LAN Security and Effectiveness Security Access control Encryption Security level SSID Low MAC Address Filtering WEP WPA-PSK (TKIP/AES) OCB AES High WOC KEY (OMRON'S original encryption) : Very good, : Good, : Satisfactory, : Not very good Note: Partly quoted from the Wireless Security Guidelines (Ministry of Internal Affairs and Communications). Screwless terminal block Easy connection to power supplies using the screwless terminal. Various antennas are available for different installation locations (optional). In addition to the included Pencil Antenna, the popular Magnetic-base Antenna is available. The FA Wireless LAN Unit can be installed inside the control panel and the Antenna on the outside of the control panel. Directional Magnetic-base Antenna Easy Installation 2.4-GHz/5-GHz Dual-band compatible ● Signal Direction from Antenna Signal range Top view Side view Antenna Note: Cannot be used outdoors. 3 Secure and easy to implement at FA sites. Prevents signal interference! Variable transmission power function! There are three transmitter output levels. By setting the level to low, you can reduce its influence on other systems within the same area, and more systems can be added. High transmitter output Low transmitter output (See note.) Note: The transmission distance will be shortened. Signal interference! Setting Tool Maintains good security. FA Wireless LAN settings can be made from a remote location! Settings can be managed from a WEB browser. Specific software tools are not required. The status of the FA Wireless LAN can be checked from the control room. AP Settings Window 4 CL Settings Window Diverse systems to match applications. Large quantities of production data can be managed as a batch. Up to 63 clients can be connected to one access point. Communications between access points enables switching of access points when expanding the communications area or when there is a communications error. or PLC Computer Ethernet Communications between Access Points (The access point becomes the repeater to extend the communications area.) Up to 6 access points can be registered with one Wireless LAN Unit Communications between Access Points WE70-AP Access point WE70-AP Access Point (repeater) (Maximum of 6 repeaters) WE70-CL Client ·············· ··········· 63 clients max. Ethernet PLC The roaming function allows systems to be moved and communicate with mobile devices. Note: Make sure that you read the Wireless LAN Unit Operation Manual (Cat. No. N153) and check the operating conditions on site before using the roaming function. WE70-AP Access Point (Master) WE70-AP Access Point (Master) WE70-AP Access Point (Master) WE70-CL Client (Slave) Automatically switches to the next access point 5 FA Wireless LAN Unit WE70 Highly reliable performance. Ideal Wireless LAN for FA sites. • Conforms to IEEE 802.11a/b/g. • Same noise and environment resistance level as a PLC. • Features OMRON'S original security system. • Signals can be observed with LED indicators. • The Wireless LAN Unit can be installed inside a control panel and the Antenna outside the control panel. • RoHS-compliant. • Conforms to radio wave standards for the USA, Europe, and China. Ordering Information ■ Wireless LAN Unit Area Europe ■ Accessories Type Model Access Point (Master) WE70-AP-EU Client (Slave) WE70-CL-EU USA Access Point (Master) WE70-AP-US Client (Slave) WE70-CL-US China Access Point (Master) WE70-AP-CN Client (Slave) WE70-CL-CN Note: 1. Includes a Pencil Antenna, magnets for mounting the Wireless LAN Unit, and a mounting bracket. 2. Make sure that the correct model for the area is used. For example, the use of the WE70-AP-US in an area other than the USA is illegal as stipulated in laws and regulations. Antenna Type Directional Magnetic-base Antenna Specifications 1 set with two Antennas, 2.4 GHz/5 GHz Dual-band compatible Model WE70-AT001H Other Type Model DIN Rail Mounting Bracket (for TH35 7.5) WT30-FT001 DIN Rail Mounting Bracket (for TH35 15) WT30-FT002 Antenna Extension Cable (5 m) WE70-CA5M Accessories Type Model PLC SYSMAC CS1/CJ1 Series Ethernet Unit CS1/CJ1W-ETN21 Switching Hub Phoenix Contact FL SWITCH 5TX Power Supply Unit S8VS, S8VM Series Conformity to EN Standards Use a DC power line less than 3 m in length to conform to EN standards. If a power line of 3 m or longer is required, extend the length at the Switching Power Supply's primary side (i.e., the AC power line). 6 FA Wireless LAN Unit WE70 Details 100Base-TX type 24 VDC, 30 W min. Conformity to Safety Standards Always use a Class 2 power supply to conform to UL standards. Main OMRON Class 2 Switching Power Supplies • S8VS (30 W, 60 W type) Specification ■ Ratings Model WE70-AP Access Point (Master) WE70-CL Client (Slave) Item Power supply Rated voltage 24 V DC Allowable 20.4 to 26.4 V DC voltage range Current 250 mA max. (See note.) consumption Insulation resistance 20 M Ω min. (at 100 V DC) between the power supply and mounting bracket Dielectric strength 1,500 V AC for 1 min between power supply and mounting bracket Noise immunity IEC 61000-4-4. 1 kV (power supply line) Vibration resistance JIS C0040 Frequency: 10 to 55 Hz; Amplitude of 0.35 mm or acceleration of 50 m/s2, whichever is smaller 10 sweeps of 8 min each (i.e., 80 min in total) in X, Y, Z directions Shock resistance Conforms to JIS C0041: 300 m/s 2 3 times each in X, Y, and Z directions Ambient operating temperature 0 to 50°C (with no condensation) Ambient operating humidity 25% to 85% (with no condensation or icing) Ambient storage temperature range −20 to 65°C Degree of protection IP20 Terminal Power construction terminal Screwless terminal block (Phoenix Contact AI 0.75-10 or equivalent) Applicable Standards FCC, UL (USA), CE Marking (EU), Chinese Electromagnetic Standards (Mainland China) Weight 360 g max. (Wireless LAN Unit only) Note: Provide a power supply of at least 30 W, considering the inrush current generated at startup. ■ Wireless Interface Specifications Item Standards Wave type Conforms to IEEE 802.11a Orthogonal Frequency Division Multiplexing (OFDM), Simplex Conforms to IEEE 802.11b Direct Sequence Spectrum Spread, Simplex Conforms to IEEE 802.11g Orthogonal Frequency Division Multiplexing (OFDM), Simplex Frequency band Refer to the following Frequency Bandwidths and Channels by Area on page 8. Number of channels Refer to the following Frequency Bandwidths and Channels by Area on page 8. Baud rate (See note 1.) Auto or 54, 48, 36, 24, 18, 12, 9, or 6 Mbps Maximum Transmission Distance (Line of Site) (See notes 2 and 3.) Indoors: Approx. 40 m (with enclosed Indoors: Approx. 60m (with enclosed Pencil Antenna at 54 Mbps) Pencil Antenna at 54 Mbps) (Outdoor use prohibited.) Security OCB AES (128 bit), WEP KEY (OMRON'S original encryption), WEP (64/128/152 bit), WPA-PSK (with AES /TKIP encryption) Auto or 11, 5.5, 2, or 1 Mbps Auto or 54, 48, 36, 24, 18, 12, 9, or 6 Mbps Transmitter output power 10 mW/MHz max. No. of connected clients 63 max. Variable transmission power 3 levels: (High/Mid/Low) If high communications distance is 100%, medium is 50%, and low is 25%. (See note 2.) Roaming function Provided Repeater function Provided (Communications between access points, 6 repeaters max.) Note: 1. Theoretical value of the Wireless LAN Standards, not the actual baud rate. 2. Depends on the installation environment. 3. The distance will be shorter when using a Magnetic-base Antenna or an extension cable. FA Wireless LAN Unit WE70 7 ■ LAN Cable Specifications Item ■ Other Parameter Item Standards Conforms to IEEE 802.3 (10Base-T, 100Base-TX) Interface RJ-45 × 1 Note: Connect to computer using a straight cable. Wireless LAN Unit Setup Specification Web browser: Microsoft Internet Explorer 6.0, 7.0, or higher OS: Windows Vista, XP, or 2000 (See note.) Note: Not compatible with Windows 98, NT, or Me. ■ Frequency Bandwidths and Channels by Area 11a (5 GHz band) 11b/g (2.4 GHz band) Frequency (MHz) Area Frequency (MHz) 5150 5350 5470 5725 5825 USA (24 channels total) 8 ch 11 ch Europe (19 channels total) 8 ch 11 ch China (5 channels total) 8 5 ch 5 ch FA Wireless LAN Unit WE70 Area USA (11 channels total) 2412 2462 11 ch Europe (13 channels total) 13 ch China (13 channels total) 13 ch 2472 Nomenclature Access Point (Master) Access Point Indicator WE70-AP(-EU/-US/-CN) Indicator Antenna Connector Used to connect enclosed Antennas. Note: To ensure good performance, always connect both of the Antennas. POWER Meaning (primary error) Power ON Not lit Power OFF Orange Lit Not lit LAN port (RJ-45 × 1) Connect a network device, such as a hub, through a LAN cable. DC Connector Supplies 24 VDC power. Status Lit Flashing Simultaneous flashing of MODE and POWER indicators shows that the setup is being initialized. (See note.) MODE INIT Button Used to operate using default settings. Color Green Using IEEE 802.11a Using IEEE 802.11b/g Flashing Simultaneous flashing of MODE and POWER indicators shows that the setup is being initialized. (See note.) WIRELESS Orange Lit Not lit LAN Orange Lit Not lit Radio communications are being established with the Wireless LAN client. There is no LAN Client communicating with the Wireless Unit, or no radio communication has been made for 5 minutes or more. LAN connection is normal. LAN is not connected. Flashing Data is being transmitted. POWER Indicator (Green) Displays the power source status and the operation mode of the Wireless LAN Unit. MODE Indicator (Orange) Displays the operating mode of the Wireless LAN Unit. WIRELESS Indicator (Orange) Displays the status of the Wireless LAN LAN Indicator (Orange) Displays the status of the wired LAN. Note: Hold down the initialization switch while the power is OFF and then turn the power ON without releasing the switch. Initialization can also be applied from the settings window using a web browser. Client Indicator Client (Slave) Indicator POWER WE70-CL(-EU/-US/-CN) Antenna Connector Used to connect enclosed Antennas. Note: To ensure good performance, always connect both of the Antennas. INIT Button Used to operate using default settings. Status Meaning (primary error) Lit Power ON Not lit Power OFF Flashing Simultaneous flashing of the RSSI and POWER indicators shows that the setup is being initialized. (See note.) RSSI RSSI Button Switches the received signal status indicator to flashing or four-level lit display. Color Green Orange Not lit No margin Flashing Level 1, duty 2 (OFF): Flashes for 1 (ON) LAN port (RJ-45 × 1) Connect a network device, such as a hub, through a LAN cable. Flashing Level 2, duty 1 (OFF): Flashes for 2 (ON) DC Connector Supplies 24 VDC power. Lit Level 3 Flashing Simultaneous flashing of MODE and POWER indicators shows that the setup is being initialized. (See note.) WIRELESS Orange Lit Not lit POWER Indicator (Green) Displays the power source status and the operation mode of the Wireless LAN Unit. RSSI Indicator (Orange) Displays the received signal strength by flashing. WIRELESS Indicator (Orange) Displays the status of the Wireless LAN. LAN Indicator (Orange) Displays the status of the wired LAN. Note: When the RSSI Button on the back of the WE70 is pressed, the received signal strength will be indicated using the POWER, RSSI, LAN, and WIRELESS indicators. The POWER indicator will flash. Press the button again or wait for 10 minutes of the indication to pass and then the indication will return to the original status. LAN Orange Lit Not lit Radio communications are being established with the Wireless LAN Access Point. There is no wireless LAN Access Point communicating with the Wireless LAN UNIT, or no radio communication has been made for more than 10 seconds. LAN connection is normal. LAN is not connected. Flashing Data is being transmitted. Note: Hold down the initialization switch while the power is OFF and then turn the power ON without releasing the switch. Initialization can also be applied from the settings window using a web browser. FA Wireless LAN Unit WE70 9 Dimensions Note: All units are in millimeters unless otherwise indicated. Access Point (Master) Using Pencil Antenna WE70-AP(-EU/-US/-CN) (129.6) (26.6) Client (Slave) WE70-CL(-EU/-US/-CN) 37.2 37.2 22.6 (231.5) (128.5) 107.6±1.0 WE70-AP FA WIRELESS LAN A CCESS POINT POWER 34.5±0.5 MODE LAN 103±1.0 103 WIRELESS 12 120±1.0 38.5 (36) Mounting Bracket Mounting Bracket 120 108±0.1 6 116±.0.2 6 Note: Leave a gap of approx. 20 mm around the sides of the Wireless LAN Unit for ventilation. Four, 4.2-dia. holes (Use flat head screws) Four, 5-dia. holes Directional Magnetic-base Antenna DIN Rail Mounting Bracket WE70-AT001H WT30-FT001 (for TH35 7.5) WT30-FT002 (for TH35 15) 25 11 1.5 Reference: Applicable DIN Rail Detail of section A for TH35 7.5 Section A 0 7.5 −0.4 193 35±0.3 0.3 max. 22 78 10 2,000±2 82.6 FA Wireless LAN Unit WE70 Detail of section A for TH35 15 15 1±0.04 1±0.04 15° Read and Understand this Catalog Please read and understand this catalog before purchasing the product. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of the product in the customer's application or use of the product. Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used. Know and observe all prohibitions of use applicable to the product. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. Note: Do not use this document to operate the Unit. OMRON Corporation Industrial Automation Company Control Devices Division H.Q. Network Devices Department Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7109/Fax: (81)75-344-7149 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 Authorized Distributor: OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, Pu Dong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Note: Specifications subject to change without notice. Cat. No. N154-E1-01A 1007