XG2A-1002

XG2 Flat Cable Connectors for PCBs Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring ■ IDC connections allow you to wire all terminals at once without terminating the cable. ■ Can be DIP-soldered directly to the circuit board. ■ Small size (height 5.8 mm, width 6.8 mm) allows more efficient use of circuit board space. ■ Uses a 2.54-mm grid terminal arrangement for easier design of circuits. ■ Type: standard and reverse. ■ Uses UL94 V-0 approved insulation material. ■ The IDC Tool has Attachments for all terminals. The result is efficient, labor-saving wiring. ■ See the "Standards certification / conformity list" for information on conformity to certification standards. RoHS Compliant ■ Terminal Arrangement The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the wires and the terminals would be as shown at the right. Standard Terminal Arrangement Reverse Terminal Arrangement Cable No. Cable No. Cable number arrangement (Top View: Component Mounting Side) Cable number arrangement (Top View: Component Mounting Side) Cable No. ■ Ratings and Characteristics Rated current 1A Rated voltage 250 VAC Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.) Insulation resistance 1,000 MΩ min. (at 500 VDC) Dielectric strength 500 VAC for 1 min (leakage current: 1 mA max.) Ambient operating temperature −55 to 85°C (with no icing at low temperature) ■ Cross-sectional View of Terminal Cable No. ■ Materials and Finish Base Contacts Fiber-glass reinforced PBT resin (UL94 V-0)/black Mating end Copper alloy/nickel base, 2.0-μm tin plating Terminals Copper alloy/nickel base, flash gold plated Cover Fiber-glass reinforced PBT resin (UL94 V-0)/black ■ Applicable Wires 1.27-mm pitch, AWG28, 7-strand flat cable. • UL2651 (standard cable) • UL20012 (folding cable) 0.6 dia. • UL20028 (color-code cable) 1 XG2A Double-row PCB Connectors ■ Dimensions (Unit: mm) Standard Terminal Arrangement: XG2A-@@01 Reverse Terminal Arrangement: XG2A-@@02 Dimensions No. of contacts Dimensions (mm) A B 10 17.9 10.16 14 22.9 15.24 16 25.5 17.78 Standard terminal arrangement 20 30.6 22.86 0.8 26 38.2 30.46 30 43.3 35.56 34 48.3 40.64 40 56.0 48.26 50 68.7 60.96 60 81.4 73.66 64 86.4 78.74 Mounting holes (bottom view) Reverse terminal arrangement +0.1 0 dia. 0.8 +0.1 dia. 0 ■ Ordering Information Appearance No. of contacts Connectors with standard terminal arrangement Connectors with reverse terminal arrangement 10 XG2A-1001 XG2A-1002 14 XG2A-1401 XG2A-1402 16 XG2A-1601 XG2A-1602 20 XG2A-2001 XG2A-2002 26 XG2A-2601 XG2A-2602 30 XG2A-3001 XG2A-3002 34 XG2A-3401 XG2A-3402 40 XG2A-4001 XG2A-4002 50 XG2A-5001 XG2A-5002 60 XG2A-6001 XG2A-6002 64 XG2A-6401 XG2A-6402 Note: The cover is an open-end type. ■ Precautions Correct Use • See the pages on the XG4 or XG2 connector for information on special tools, such as IDC press tools. Handling Automated Soldering Conditions (Jet Flow) • There is no Strain Relief for the PCB Connector. Leave enough slack to avoid tension on the cable. • Terminals can be press fit no matter which direction the base and cover are facing. 2 Flat Cable Connectors for PCBs XG2 1. Soldering temperature: 250 ±5°C 2. Continuous soldering time: Within 5±1 s XY3A Flat Cable (UL-approved Wires) ■ See the "Standards certification / conformity list" for information on conformity to certification standards. ■ Dimensions (Unit: mm) XY3A-@@01 Standard Cables XY3A-@@02 Folding Cables XY3A-@@03 Color-coded Cables Contact area Non-contact area Core No. Cable mark 0.98 Insulation color Core No. Insulation color 1 Brown 6 Blue 2 Red 7 Purple 3 Orange 8 Gray 4 Yellow 9 White 5 Green 10 Black Note: The colors above repeat again from 11 cores. ■ Ordering Information (Order in 1-roll (61.0 m) units) No. of cores Standard Cable Folding Cable (See note.) Color-coded Cable Dimensions (mm) A B Applicable Connector MIL IDC Plug PCB 10 XY3A-1001 XY3A-1002 XY3A-1003 11.4 12.7 XG4M-10@@ XG4E-10@@ XG2A-100@ 14 XY3A-1401 XY3A-1402 XY3A-1403 16.5 17.8 XG4M-1430 XG4E-143@ XG2A-140@ 16 XY3A-1601 XY3A-1602 XY3A-1603 19.1 20.3 XG4M-1630 XG4E-163@ XG2A-160@ 20 XY3A-2001 XY3A-2002 XY3A-2003 24.1 25.4 XG4M-2030 XG4E-203@ XG2A-200@ 26 XY3A-2601 XY3A-2602 XY3A-2603 31.8 33.0 XG4M-2630 XG4E-263@ XG2A-260@ 30 XY3A-3001 XY3A-3002 XY3A-3003 36.8 38.1 XG4M-3030 XG4E-303@ XG2A-300@ 34 XY3A-3401 XY3A-3402 XY3A-3403 41.9 43.2 XG4M-3430 XG4E-343@ XG2A-340@ 40 XY3A-4001 XY3A-4002 XY3A-4003 49.5 50.8 XG4M-4030 XG4E-403@ XG2A-400@ 50 XY3A-5001 XY3A-5002 XY3A-5003 62.2 63.5 XG4M-50@@ XG4E-50@@ XG2A-500@ 60 XY3A-6001 XY3A-6002 XY3A-6003 74.9 76.2 XG4M-60@@ XG4E-60@@ XG2A-600@ 64 XY3A-6401 XY3A-6402 XY3A-6403 80.0 81.3 XG4M-64@@ XG4E-64@@ XG2A-640@ Note: Dimensions A and B are for the contact area of folding flat cable. ■ Ratings and Characteristics Classification Item XY3A-@@01 Standard Cables UL file No. UL2651 Max. operating voltage 300 V Max. operating temperature 105°C XY3A-@@02 Folding Cables Max. conductor resistance 222 Ω/km (at 20°C) Dielectric strength 2,000 VAC for 1 min Min. insulation resistance 100 kΩ-km (at 20°C) XY3A-@@03 Color-code Cables ■ Materials Conductor AWG28 (7/0.127), tin plated, soft copper wire Insulation Heat-resistant vinyl Flat Cable Connectors XG4/XG2 3 ■ Special Tools XY2B-0002 IDC Tool Model XY2B-0002 ■ IDC Tool Attachments for XG4M and XG2A XY2B-1006 Attachment for the XG2A XY2B-1007 Attachment for the XG4M Locator slot Cable stopper Operation XG4M-series Connectors must be placed face down into the locator slot of the Attachment. (With the XG2A Series, place the terminal block in the Attachment.) Insert the cable until it is flush against the cable stopper. Connections are made by pulling the handle towards you until it stops. For details on operation, see the user’s manual supplied with the IDC Tool. Combinations IDC Tool XY2B-0002 Attachment Applicable Socket XY2B-1007 XG4M (All contacts) XY2B-1006 XG2A (All contacts) ■ IDC Tool Attachments for XG4E XY2B-14@@ Spacer for the XG4E XY2B-1004 Attachment for the XG4E Combinations IDC Tool XY2B-0002 4 Attachment XY2B-1004 Spacer Applicable Plug XY2B-1401 XG4E-10@1/-10@2 XG4E-1431/-1432 XY2B-1402 XG4E-1631/-1632 XG4E-2031/-2032 XY2B-1403 XG4E-2631/-2632 XG4E-3031/-3032 XY2B-1404 XG4E-3431/-3432 XY2B-1405 XG4E-4031/-4032 XY2B-1406 XG4E-50@1/-50@2 XY2B-1407 XG4E-60@1/-60@2 XG4E-54@1/-64@2 Flat Cable Connectors XG4/XG2 Operation XG4E-series Connectors must be placed face down into the locator slot of the Attachment. Insert the cable until it is flush against the cable stopper. Next set the proper spacer for the Plug. Connections are made by pulling the handle towards you until it stops. Spacer XG4E Attachment Cable Cover Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2012-2021 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. G040-E1-04 1021 (0412)