XH5-N
Half-Pitch SMT Connectors (Board to Board and Board to Cable Connectors)
SMT Connectors with
1.27-mm Pitch
• These SMT connectors allows other components to
be mounted on the back of surfaces of circuit
boards.
• Circuit board positioning bosses provide accurate
mounting on circuit boards.
• Compatible with reflow mounting.
• Variety of contact numbers, board connection
directions (vertical, horizontal, stacking) and variety of
stacking heights allow flexible product design.
• Through-hole reflow hold-down types (THR type) are
available for enhanced board mounting.
• Crimping sockets are available for easier on-site
harness assembling. Also available with harness as
standard.
Refer to “Precautions”
on page 13.
Terminology
● SMT
An abbreviation for Surface Mount Technology.
● Stacking connections
Stacking circuit boards and connecting them parallel to each other.
The distance between the stacked circuit boards is called the
stacking height.
● Vertical connection
Connecting circuit boards vertically.
● Horizontal connection
Connecting circuit boards horizontally.
● THR
An abbreviation for Through-Hole Reflow. Mounting technology
combined with through-hole solder connection for higher
mechanical stability and surface-mounting for automation
process.
Connectors
Board mounting type: Terminal part/hold-down part SMT type
Model
XH5A-@@15-N
Plug, Right-angle
XH5E-@@15-@N
Plug, Straight
XH5F-@@15-N
Socket, Right-angle
XH5B-@@15-@N
Socket, Straight
Appearance
Page
P.3
P.6
Board mounting type: Terminal part SMT type, hold-down part THR type
Model
XH5A-@@16-N
Plug, Right-angle
XH5E-@@16-@N
Plug, Straight
XH5B-@@16-@N
Socket, Straight
Appearance
Page
P.4
P.7
Cable connection type/Cable with connectors on both ends
Model
XH5M-@@10-N
XH5T-@@04-N
Socket, IDC Type
Strain Relief
XH5H-@@10-@@N
Cable with Connectors on Both Ends
(Socket/Socket)
Appearance
Page
P.9
P.11
1
XH5-N
Part Number Structure
Board Mounting Type
XH5 @ - @ @1 @-@ N
(1)
(2)
(3) (4)
(1) Type
(2) Number of contacts
Code
A
B
E
F
Type
Plug, Right-angle
Socket, Straight
Plug, Straight
Socket, Right-angle
Code
12
20
26
32
40
50
68
80
(3) Terminal
Number of contacts
12 contacts
20 contacts
26 contacts
32 contacts
40 contacts
50 contacts
68 contacts
80 contacts
(4) Height of Straight Plug/Socket
Code
5
6
Type
Terminal part/hold-down part SMT type
Terminal part SMT type, hold-down part THR type
Code
NO
1
2
3
4
5
6
Height
- (Right-angle Plug/Socket)
6.6 mm
8.1 mm
9.7 mm
6.25 mm
9.05 mm
13.65 mm
Note: Symbols 1, 2 and 3 are limited to plugs, while symbols 4, 5 and 6 are limited to sockets.
Socket, IDC Type
Strain Relief
XH5M- @ @10-N
XH5T- @ @ 04-N
(1) Number of contacts
Code
12
20
26
32
40
50
68
80
(1) Number of contacts
Number of contacts
12 contacts
20 contacts
26 contacts
32 contacts
40 contacts
50 contacts
68 contacts
80 contacts
Code
12
20
26
32
40
50
68
80
Number of contacts
12 contacts
20 contacts
26 contacts
32 contacts
40 contacts
50 contacts
68 contacts
80 contacts
Cable with Connectors on Both Ends
XH5H- @ @ 10- @ @ N
(1)
(2)
(1) Number of contacts
Code
12
20
26
32
40
50
68
80
(2) Cable Length
Number of contacts
12 contacts
20 contacts
26 contacts
32 contacts
40 contacts
50 contacts
68 contacts
80 contacts
Code
10
20
30
50
70
1M
Ratings / Characteristics
Rated current
1A
Rated voltage
100 VAC
Contact resistance
25 m max. (at 20 m VDC, 100 mA max.)
Insulation resistance
1000 M min. (at 100 VDC)
Dielectric strength 500 VAC for 1 min.
Insertion durability
500 times
Ambient operating
temperature
-55 to +105°C (with no condensation or icing)*1
*1. The temperature of -20 to +105°C is limited to XH5H-N.
Applicable Wire
0.635 mm pitch flat cable AWG30 (7 twisted wires)
2
Length
100 mm
200 mm
300 mm
500 mm
700 mm
1000 mm
Materials and Finish
Model XH5A-N/XH5B-N/
XH5E-N/XH5F-N
Item
XH5M-N
XH5T-N
Housing
LCP (UL94 V-0)/black
LCP (UL94 V-0)/black
Cover
-
PBT (UL94 V-0)/black
Contacts
Mating end
Copper alloy/gold plated Copper alloy/gold plated
Terminals
IDC end
Copper alloy/tin plated
Copper alloy/tin plated
Hold-down
Copper alloy/tin plated
-
Strain Relief
-
-
PBT (UL94
V-0)/black
XH5-N
XH5A-N/XH5E-N
(Unit: mm)
Please visit our CAD Data website, which is noted on the last page.
XH5A-@@15-N
Plug, Right-angle
Terminal part/hold-down part SMT type
CAD Data
Mounting Holes
A
1.27
B
A
7.4
2.72
2.21
1.27
1.2
0.3
@0.8
Attachment area 5 dia.
Board end
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are
for the positioning bosses. Use
metal masks to prevent solder from
entering these holes.
2.78
4.25
3.25
1.8
1.27
D
E
b1
0.75
1.48 dia. MAX.
6.65
4 MAX.
4.9
a1
*Positioning
boss hole
1.55±0.05 dia.
2
8.65
b1
1.27
CAD Data
2.7
Dimensions
Plug, Terminal part/hold-down part SMT type
a1
B
C
Table of Dimensions
XH5E-@@15-@N
Plug, Straight
Terminal part/hold-down
part SMT type
Model
Number of contacts
A
B
C
D
E
XH5A-1215-N
12
6.35
10.77
12.70
9.57
8.57
XH5A-2015-N
20
11.43
15.85
17.78
14.65
13.65
XH5A-2615-N
26
15.24
19.66
21.59
18.46
17.46
XH5A-3215-N
32
19.05
23.47
25.40
22.27
21.27
XH5A-4015-N
40
24.13
28.55
30.48
27.35
26.35
XH5A-5015-N
50
30.48
34.90
36.83
33.70
32.70
XH5A-6815-N
68
41.91
46.33
48.26
45.13
44.13
XH5A-8015-N
80
49.53
53.95
55.88
52.75
51.75
CAD Data
Mounting Holes
Absorption pad
Without
absorption pad
D
A
*Positioning
boss hole
1.55±0.05 dia.
7.4
3.25
1.8
B
A
1.27
2.21
1.27
b1
a1
C
G
F
4.46
a1
0.3
Absorption
pad
Absorption
pad
1.2
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are
for the positioning bosses. Use
metal masks to prevent solder from
entering these holes.
0.75
H
I
1.48 dia. MAX.
5.5
0.8
1.1
6.4
4.2
2.5
5.1
b1
E
1.27
B
Table of Dimensions
Model
Number of contacts
A
B
C
D
E
F
G
XH5E-1215-@N
12
6.35
10.77
12.70
9.57
8.57
10.37
2.96
XH5E-2015-@N
20
11.43
15.85
17.78
14.65
13.65
15.45
5.50
XH5E-2615-@N
26
15.24
19.66
21.59
18.46
17.46
19.26
7.40
XH5E-3215-@N
32
19.05
23.47
25.40
22.27
21.27
23.07
9.31
XH5E-4015-@N
40
24.13
28.55
30.48
27.35
26.35
28.15
11.85
XH5E-5015-@N
50
30.48
34.90
36.83
33.70
32.70
34.50
15.02
XH5E-6815-@N
68
41.91
46.33
48.26
45.13
44.13
45.93
20.74
XH5E-8015-@N
80
49.53
53.95
55.88
52.75
51.75
53.55
24.55
H
I
1: 6.6
2: 8.1
3: 9.7
1: 7.6
2: 9.1
3: 10.7
Note: @ is replaced by 1 to 3 to indicate the connector height type.
3
XH5-N
XH5A-N/XH5E-N
CAD Data
(Unit: mm)
Please visit our CAD Data website, which is noted on the last page.
XH5A-@@16-N
Plug, Right-angle
Terminal part SMT type,
hold-down part THR type
CAD Data
A
1.27
Mounting Holes
Tin plating: 0.015 MAX.
Copper plating: 0.025 MIN.
Section A-A
1.27
2.76
b1
a1
*Positioning
boss hole
1.35 dia.
1.55±0.05 dia.
0.8±0.03 dia.
A
A
Attachment area 5 dia.
4 MAX.
2±0.03
0.9±0.02
Drill diameter
Board
thickness
C
B
A
1.27
0.8
5.5
(2.75)
8.65
2.72
5.95 MAX.
1.75 MAX.
Dimensions
Plug, Terminal part SMT type, hold-down part THR type
Board end
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are
for the positioning bosses. Use
metal masks to prevent solder from
entering these holes.
2.78
6.25
4.25
0.75
3.25
1.8
1.27
D
E
b1
a1
B
1.48 dia. MAX.
6.65
C
F
Table of Dimensions
Number of contacts
A
B
C
XH5A-1216-N
XH5A-2016-N
12
6.35
10.77
11.87
9.57
8.57
12.70
20
11.43
15.85
16.95
14.65
13.65
17.78
XH5A-2616-N
26
15.24
19.66
20.76
18.46
17.46
21.59
XH5A-3216-N
32
19.05
23.47
24.57
22.27
21.27
25.40
XH5A-4016-N
40
24.13
28.55
29.65
27.35
26.35
30.48
XH5A-5016-N
50
30.48
34.90
36.00
33.70
32.70
36.83
XH5A-6816-N
68
41.91
46.33
47.43
45.13
44.13
48.26
XH5A-8016-N
80
49.53
53.95
55.05
52.75
51.75
55.88
D
F
CAD Data
1.75 MAX.
Mounting Holes
(2.75)
b1
1.35 dia.
0.8±0.03 dia.
a1 A
A
Section A-A
0.8
1.27
6.4
Absorption pad
A
B
4.2
0.75
I
J
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are
for the positioning bosses. Use
metal masks to prevent solder from
entering these holes.
2
1.27
B
1.48 dia. MAX.
H
Model
Number of contacts
A
B
C
D
E
F
G
H
XH5E-1216-@N
12
6.35
10.77
12.70
9.57
8.57
10.37
2.96
11.87
XH5E-2016-@N
20
11.43
15.85
17.78
14.65
13.65
15.45
5.50
16.95
XH5E-2616-@N
26
15.24
19.66
21.59
18.46
17.46
19.26
7.40
20.76
XH5E-3216-@N
32
19.05
23.47
25.40
22.27
21.27
23.07
9.31
24.57
XH5E-4016-@N
40
24.13
28.55
30.48
27.35
26.35
28.15
11.85
29.65
XH5E-5016-@N
50
30.48
34.90
36.83
33.70
32.70
34.50
15.02
36.00
XH5E-6816-@N
68
41.91
46.33
48.26
45.13
44.13
45.93
20.74
47.43
XH5E-8016-@N
80
49.53
53.95
55.88
52.75
51.75
53.55
24.55
55.05
Note: @ is replaced by 1 to 3 to indicate the connector height type.
2.76
H
Absorption pad
Table of Dimensions
5.5
Tin plating: 0.015 MAX.
Copper plating: 0.025 MIN.
*Positioning boss hole
1.55±0.05 dia.
1.1
0.9±0.02
Drill diameter
Board
thickness
a1
F
4.46
G
5.95 MAX.
1.27
b1
E
C
4
E
Absorption pad
D
A
3.25
1.8
XH5E-@@16-@N
Plug, Straight
Terminal part SMT type,
hold-down part THR type
Model
I
J
1: 6.6
2: 8.1
3: 9.7
1: 7.6
2: 9.1
3: 10.7
XH5-N
Ordering Information
Plug, Right-angle
Terminal part/hold-down part SMT type
Number of
contacts
12
20
26
32
40
50
68
80
Model
Plug, Straight
Terminal part/hold-down part SMT type
Quantity per reel (pcs)
XH5A-1215-N
XH5A-2015-N
XH5A-2615-N
XH5A-3215-N
XH5A-4015-N
XH5A-5015-N
XH5A-6815-N
XH5A-8015-N
Number of
contacts
12
560
20
26
32
40
50
68
80
Height (mm)
Model
Quantity per reel (pcs)
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
XH5E-1215-1N
XH5E-1215-2N
XH5E-1215-3N
XH5E-2015-1N
XH5E-2015-2N
XH5E-2015-3N
XH5E-2615-1N
XH5E-2615-2N
XH5E-2615-3N
XH5E-3215-1N
XH5E-3215-2N
XH5E-3215-3N
XH5E-4015-1N
XH5E-4015-2N
XH5E-4015-3N
XH5E-5015-1N
XH5E-5015-2N
XH5E-5015-3N
XH5E-6815-1N
XH5E-6815-2N
XH5E-6815-3N
XH5E-8015-1N
XH5E-8015-2N
XH5E-8015-3N
280
280
250
280
280
250
280
280
250
280
280
250
280
280
250
280
280
250
280
280
250
280
280
250
Plug, Right-angle
Terminal part SMT type, hold-down part THR type
Plug, Straight
Terminal part SMT type, hold-down part THR type
Number of
contacts
12
20
26
32
40
50
68
80
Number of
contacts
Model
XH5A-1216-N
XH5A-2016-N
XH5A-2616-N
XH5A-3216-N
XH5A-4016-N
XH5A-5016-N
XH5A-6816-N
XH5A-8016-N
Quantity per reel (pcs)
12
440
20
26
32
40
50
68
80
Height (mm)
Model
Quantity per reel (pcs)
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
6.6
8.1
9.7
XH5E-1216-1N
XH5E-1216-2N
XH5E-1216-3N
XH5E-2016-1N
XH5E-2016-2N
XH5E-2016-3N
XH5E-2616-1N
XH5E-2616-2N
XH5E-2616-3N
XH5E-3216-1N
XH5E-3216-2N
XH5E-3216-3N
XH5E-4016-1N
XH5E-4016-2N
XH5E-4016-3N
XH5E-5016-1N
XH5E-5016-2N
XH5E-5016-3N
XH5E-6816-1N
XH5E-6816-2N
XH5E-6816-3N
XH5E-8016-1N
XH5E-8016-2N
XH5E-8016-3N
220
5
XH5-N
XH5F-N/XH5B-N
CAD Data
(Unit: mm)
Please visit our CAD Data website, which is noted on the last page.
XH5F-@@15-N
Socket, Right-angle
Terminal part/hold-down
part SMT type
CAD Data
Mounting Holes
A
1.27
B
A
2.21
1.27
a1
0.8
4.9
2.7
5.2
1.27
9.2
7.4
2.72
b1
2
Dimensions
Socket, Terminal part/hold-down part SMT type
*Positioning
boss hole
1.55±0.05 dia.
0.3
Attachment area 5 dia.
1.2
1.27
2.78
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are
for the positioning bosses. Use
metal masks to prevent solder from
entering these holes.
3.7
3.05
1.55
C
D
b1
a1
0.75
1.48 dia. MAX.
E
B
7.2
Table of Dimensions
Model
Number of contacts
A
B
C
D
E
XH5F-1215-N
12
6.35
10.77
12.70
9.37
8.37
XH5F-2015-N
20
11.43
15.85
17.78
14.45
13.45
XH5F-2615-N
26
15.24
19.66
21.59
18.26
17.26
XH5F-3215-N
32
19.05
23.47
25.40
22.07
21.07
XH5F-4015-N
40
24.13
28.55
30.48
27.15
26.15
XH5F-5015-N
50
30.48
34.90
36.83
33.50
32.50
XH5F-6815-N
68
41.91
46.33
48.26
44.93
43.93
XH5F-8015-N
80
49.53
53.95
55.88
52.55
51.55
XH5B-@@15-@N
Socket, Straight
Terminal part/hold-down
part SMT type
CAD Data
Mounting Holes
E
A
Without
Absorption
absorption pad
pad
1.27
7.4
3.05
F
5.5
5.1
2.5
b1
0.3
1.2
1.1
0.8
D
Absorption pad
4.46
*Positioning
boss hole
1.55±0.05 dia.
a1
a1
b1
6.4
B
A
1.27
2.21
1.55
C
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are for
the positioning bosses. Use metal
masks to prevent solder from
entering these holes.
0.75
G
H
Absorption pad
1.27
1.48 dia. MAX.
B
Table of Dimensions
Model
Number of contacts
A
B
C
D
E
F
XH5B-1215-@N
12
6.35
10.77
12.70
9.37
8.37
2.46
XH5B-2015-@N
20
11.43
15.85
17.78
14.45
13.45
5.00
XH5B-2615-@N
26
15.24
19.66
21.59
18.26
17.26
7.54
XH5B-3215-@N
32
19.05
23.47
25.40
22.07
21.07
8.81
XH5B-4015-@N
40
24.13
28.55
30.48
27.15
26.15
11.35
XH5B-5015-@N
50
30.48
34.90
36.83
33.50
32.50
15.16
XH5B-6815-@N
68
41.91
46.33
48.26
44.93
43.93
20.24
XH5B-8015-@N
80
49.53
53.95
55.88
52.55
51.55
24.05
Note: @ is replaced by 4 to 6 to indicate the connector height type.
6
G
H
4: 6.25
5: 9.05
6: 13.65
4: 7.1
5: 9.9
6: 14.5
XH5-N
XH5B-N
CAD Data
(Unit: mm)
Please visit our CAD Data website, which is noted on the last page.
XH5B-@@16-@N
Socket, Straight
Terminal part SMT type,
hold-down part THR type
CAD Data
Mounting Holes
3.05
1.55
1.27
a1
0.9±0.02
Drill diameter
Board thickness
G
4.46
(2.75)
b1
Absorption pad
2.76
1.27
0.8
Tin plating: 0.015 MAX.
Copper plating: 0.025 MIN.
Section A-A
D
C
F
B
A
a1
*Positioning boss hole
1.55±0.05 dia.
1.35 dia.
0.8±0.03 dia.
1.1
5.5
1.75 MAX.
Absorption pad
E
A
5.95 MAX.
Dimensions
Socket, Terminal part SMT type, hold-down part THR type
b1 A
A
6.4
Pattern pitch tolerance
Note: The overall pattern pitch
tolerance for the board is ±0.03.
Do not accumulate error.
* The 1.55±0.05 diameter holes are for
the positioning bosses. Use metal
masks to prevent solder from
entering these holes.
2
0.75
H
I
Absorption pad
B
1.48 dia. MAX.
F
Table of Dimensions
Model
Number of
contacts
XH5B-1216-@N
XH5B-2016-@N
A
B
C
12
6.35
10.77
12.70
20
11.43
15.85
17.78
XH5B-2616-@N
26
15.24
19.66
21.59
XH5B-3216-@N
32
19.05
23.47
XH5B-4016-@N
40
24.13
XH5B-5016-@N
50
30.48
XH5B-6816-@N
68
XH5B-8016-@N
80
D
E
F
G
9.37
8.37
11.87
2.46
14.45
13.45
16.95
5.00
18.26
17.26
20.76
7.54
25.40
22.07
21.07
24.57
8.81
28.55
30.48
27.15
26.15
29.65
11.35
34.90
36.83
33.50
32.50
36.00
15.16
41.91
46.33
48.26
44.93
43.93
47.43
20.24
49.53
53.95
55.88
52.55
51.55
55.05
24.05
H
I
4: 6.25
5: 9.05
6: 13.65
4: 7.1
5: 9.9
6: 14.5
Note: @ is replaced by 4 to 6 to indicate the connector height type.
7
XH5-N
Ordering Information
Socket, Right-angle
Terminal part/hold-down part SMT type
Number of
contacts
12
20
26
32
40
50
68
80
Model
XH5F-1215-N
XH5F-2015-N
XH5F-2615-N
XH5F-3215-N
XH5F-4015-N
XH5F-5015-N
XH5F-6815-N
XH5F-8015-N
Socket, Straight
Terminal part/hold-down part SMT type
Quantity per reel (pcs)
Number of
contacts
12
560
20
26
32
40
50
68
80
Height (mm)
Model
Quantity per reel (pcs)
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
XH5B-1215-4N
XH5B-1215-5N
XH5B-1215-6N
XH5B-2015-4N
XH5B-2015-5N
XH5B-2015-6N
XH5B-2615-4N
XH5B-2615-5N
XH5B-2615-6N
XH5B-3215-4N
XH5B-3215-5N
XH5B-3215-6N
XH5B-4015-4N
XH5B-4015-5N
XH5B-4015-6N
XH5B-5015-4N
XH5B-5015-5N
XH5B-5015-6N
XH5B-6815-4N
XH5B-6815-5N
XH5B-6815-6N
XH5B-8015-4N
XH5B-8015-5N
XH5B-8015-6N
280
280
170
280
280
170
280
280
170
280
280
170
280
280
170
280
280
170
280
280
170
280
280
170
Socket, Straight
Terminal part SMT type, hold-down part THR type
Number of
contacts
12
20
26
32
40
50
68
80
8
Height (mm)
Model
Quantity per reel (pcs)
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
6.25
9.05
13.65
XH5B-1216-4N
XH5B-1216-5N
XH5B-1216-6N
XH5B-2016-4N
XH5B-2016-5N
XH5B-2016-6N
XH5B-2616-4N
XH5B-2616-5N
XH5B-2616-6N
XH5B-3216-4N
XH5B-3216-5N
XH5B-3216-6N
XH5B-4016-4N
XH5B-4016-5N
XH5B-4016-6N
XH5B-5016-4N
XH5B-5016-5N
XH5B-5016-6N
XH5B-6816-4N
XH5B-6816-5N
XH5B-6816-6N
XH5B-8016-4N
XH5B-8016-5N
XH5B-8016-6N
220
XH5-N
XH5M-N/XH5T-N
Dimensions
CAD Data
Socket, IDC Type, Strain Relief
(Unit: mm)
Please visit our CAD Data website, which is noted on the last page.
XH5M-@@10-N
Socket, IDC Type
CAD Data
12.2
Cable mark (a1)
B
D
b1
1.27
5.6
3.05
1.55
a1
A
C
Table of Dimensions
Number of contacts
A
B
C
D
12
6.35
15.40
9.37
8.37
XH5M-2010-N
20
11.43
20.48
14.45
13.45
XH5M-2610-N
26
15.24
24.29
18.26
17.26
XH5M-3210-N
32
19.05
28.10
22.07
21.07
XH5M-4010-N
40
24.13
33.18
27.15
26.15
XH5M-5010-N
50
30.48
39.53
33.50
32.50
XH5M-6810-N
68
41.91
50.96
44.93
43.93
XH5M-8010-N
80
49.53
58.58
52.55
51.55
CAD Data
12 pins to 50 pins
(15)
9.9
6.3
A
68 pins, 80 pins
6.3
(16.2)
11.1
XH5T-@@04-N
Strain Relief
Model
XH5M-1210-N
A
Table of Dimensions
Model
Number of contacts
A
XH5T-1204-N
12
11.12
XH5T-2004-N
20
16.20
XH5T-2604-N
26
20.01
XH5T-3204-N
32
23.82
XH5T-4004-N
40
28.90
XH5T-5004-N
50
35.25
XH5T-6804-N
68
46.68
XH5T-8004-N
80
54.30
9
XH5-N
Ordering Information
Socket, IDC Type
10
Strain Relief
Number of
contacts
Model
Minimum packaging unit
(pcs)
Number of
contacts
Model
Minimum packaging unit
(pcs)
12
XH5M-1210-N
100
12
XH5T-1204-N
100
20
XH5M-2010-N
105
20
XH5T-2004-N
100
26
XH5M-2610-N
120
26
XH5T-2604-N
100
32
XH5M-3210-N
100
32
XH5T-3204-N
100
40
XH5M-4010-N
100
40
XH5T-4004-N
100
50
XH5M-5010-N
75
50
XH5T-5004-N
75
68
XH5M-6810-N
50
68
XH5T-6804-N
75
80
XH5M-8010-N
50
80
XH5T-8004-N
50
XH5-N
Crimping Tool & Flat Cable for
XH5M-N
Crimping Tool
Please contact your OMRON representative for crimping tool.
Flat Cable Specifications
For XH5M-N, use flat cables with the following specifications.
Flat Cable Specifications
Recommended Manufacturer
AWG30 (7/0.1)
Tin-plated copper wire
Conductor
Insulator
OKI Electric Cable Model
0.635 mm-pitch flat
cable
Soft vinyl chloride
Bridge type: FLEX-B2( )-7/0.1 20028 *1
Blinds type: FLEX-S2( )-7/0.1 7030 20028 *1
*1. The value in ( ) represents the core number.
Consult OKI Electric Cable Co., Ltd. for details.
XH5H-N
Cable with Connectors on Both Ends
Dimensions / Ordering Information
CAD Data
Please visit our CAD Data website, which is noted on the last page.
XH5H-@@10-@@N
(Unit: mm)
CAD Data
L
(20)
a1
a1
Label
Cable mark
Table of Dimensions
Number of
contacts
12
20
26
32
Minimum
packaging unit
(pcs)
Number of
contacts
Length L (mm)
Model
XH5H-1210-10N
100
XH5H-4010-10N
XH5H-1210-20N
200
XH5H-4010-20N
300
XH5H-1210-30N
300
XH5H-4010-30N
500
XH5H-1210-50N
500
XH5H-4010-50N
700
XH5H-1210-70N
700
XH5H-4010-70N
1000
XH5H-1210-1MN
1000
XH5H-4010-1MN
100
XH5H-2010-10N
100
XH5H-5010-10N
200
XH5H-2010-20N
200
XH5H-5010-20N
300
XH5H-2010-30N
300
XH5H-5010-30N
500
XH5H-2010-50N
500
XH5H-5010-50N
700
XH5H-2010-70N
700
XH5H-5010-70N
1000
XH5H-2010-1MN
1000
XH5H-5010-1MN
100
XH5H-2610-10N
100
XH5H-6810-10N
200
XH5H-2610-20N
200
XH5H-6810-20N
300
XH5H-2610-30N
300
XH5H-6810-30N
500
XH5H-2610-50N
500
XH5H-6810-50N
700
XH5H-2610-70N
700
XH5H-6810-70N
1000
XH5H-2610-1MN
1000
XH5H-6810-1MN
100
XH5H-3210-10N
100
XH5H-8010-10N
200
XH5H-3210-20N
200
XH5H-8010-20N
300
XH5H-3210-30N
300
XH5H-8010-30N
500
XH5H-3210-50N
500
XH5H-8010-50N
700
XH5H-3210-70N
700
XH5H-8010-70N
1000
XH5H-3210-1MN
1000
XH5H-8010-1MN
Length L (mm)
Model
100
200
40
50
10
68
80
Minimum
packaging unit
(pcs)
10
11
XH5-N
Mating Diagram
(Unit: mm)
● Stacking connections
Model combination
A
A
Plug
Socket
XH5E-@@1@-1N
XH5B-@@1@-4N
8.0
XH5E-@@1@-2N
XH5B-@@1@-4N
9.5
XH5E-@@1@-1N
XH5B-@@1@-5N
10.8
XH5E-@@1@-3N
XH5B-@@1@-4N
11.1
XH5E-@@1@-2N
XH5B-@@1@-5N
12.3
XH5E-@@1@-3N
XH5B-@@1@-5N
13.9
XH5E-@@1@-1N
XH5B-@@1@-6N
15.4
XH5E-@@1@-2N
XH5B-@@1@-6N
16.9
XH5E-@@1@-3N
XH5B-@@1@-6N
18.5
● Vertical connection
Plug, Right-angle
Socket, Straight
Model combination
Plug
A
B
XH5B-@@1@-4N
7.7
11.53
XH5B-@@1@-5N
10.5
14.33
XH5B-@@1@-6N
15.10
18.93
A
B
Socket
XH5A-@@1@-N
B
A
Socket, Right-angle
Plug, Straight
Model combination
Plug
Socket
XH5E-@@1@-1N
XH5E-@@1@-2N
XH5F-@@15-N
XH5E-@@1@-3N
B
A
● Horizontal connection
16.25
4
4
8.6 min.
12
Model combination
Plug
Socket
XH5A-@@1@-N
XH5F-@@15-N
8.75
12.58
10.25
14.08
11.85
15.68
XH5-N
Precautions
Precautions for Correct Use
● Soldering Conditions
• Recommended Reflow Conditions
Maximum temperature: 260°C
Time: Within 20 to 40 s
(°C)
Peak temperature
260
Soldering temperature
250
Preheating temperature 180
(s)
Preheating time
Within 60 to 120 s
Soldering time
Within 20 to 40 s
These conditions, however, depend on the type of solder, the
manufacturer, the amount of solder, the size of the circuit
board, and the other mounting materials. You must check and
select the actual conditions.
● Metal Mask Thickness for Cream Solder Printing
We recommend a metal mask thickness of 0.18 to 0.20 mm
for cream solder printing.
These conditions, however, depend on the type of solder, the
manufacturer, the amount of solder, the size of the circuit
board, and the other mounting materials. You must check and
select the actual conditions.
● Pin Deformation
The pins will deform if you subject them to an excessive load.
Deformed pins will reduce solderability when the connectors
are mounted. Do not drop the connectors or handle them
roughly. Do not connect or disconnect connectors that are not
mounted to a circuit board. Doing so may deform the pins.
● In case of welding on the automatic welding groove
after reflow
To prevent the rise of flux, mask the circuit board positioning
boss holes with tape before you perform automatic soldering.
If you mount connectors on the edges of the circuit boards,
make sure that the solder surface does not come into contact
with the connectors and that flux does not adhere to contact
surfaces.
● Board Mounting Precautions
Be careful of board warping. Warping that is too severe may
cause faulty soldering.
● Application Precautions
• Confirm that there is no excessive misalignment or
inclination in the mating contact portion between the plug
and socket before mating the connectors. Make sure that
the connectors are mated all the way to the back. If the
connectors are not mated all the way to the back, contact
reliability may be lost.
• Do not apply an extreme load during connectors insertion or
removal. The connectors may be damaged, and contact
failure may result. Twist the plug and socket as little as
possible when mating the connectors. Not doing so may
deform the terminals or housing or crack the housing.
• Do not insert a foreign object, such as tweezers, into the
connectors mating contact portion. Doing so may cause the
plating to peel off or deforming of the terminals.
• When removing the harness, do not apply load to the flat
cable. Otherwise, damage to the flat cable or the crimped
part will result in poor contact.
● Connector Crimping and Strain Relief Installation.
• The flat cable can be crimped only once. Do not remove the
flat cable or the cover after crimping. Otherwise, damage or
poor contact will occur.
• After crimping, check that the claw of the cover housing is
completely engaged. If the claw is not completely engaged,
make some necessary adjustment. Incomplete
engagement of the claw will result in poor contact.
• The installation of the strain relief should be performed
straightly. Inclined installation will result in damage.
• Once installed, the strain relief cannot be removed. Forcibly
removing it will result in damage.
• Do not apply load by bundling the flat cable or bending it
excessively. Otherwise, poor contact will occur.
● Storage
(1) Do not store the connectors in locations subject to dust or
high humidity.
(2) Do not store the connectors in locations close to sources
of gases such as ammonia or sulfide gases.
Approval Standard
The approval rating values for overseas standards are different from the performance values determined individually.
Confirm the values before use.
Model
XH5A-@@15-N
Standard
UL certified product (Recognized)
File No.
E103202
Rating
-
XH5A-@@16-N
UL certified product (Recognized)
E103202
-
XH5E-@@15-@N
UL certified product (Recognized)
E103202
-
XH5E-@@16-@N
UL certified product (Recognized)
E103202
-
XH5F-@@15-N
UL certified product (Recognized)
E103202
-
XH5B-@@15-@N
UL certified product (Recognized)
E103202
-
XH5B-@@16-@N
UL certified product (Recognized)
E103202
-
XH5M-@@10-N
UL certified product (Recognized)
E103202
XH5T-@@04-N
Non Approved Models
-
-
XH5H-@@10-@@N
Non Approved Models
-
-
-
13
Please check each region's Terms & Conditions by region website.
OMRON Corporation
Device & Module Solutions Company
Regional Contact
Americas
https://components.omron.com/us
Asia-Pacific
https://components.omron.com/ap
Korea
https://components.omron.com/kr
Europe
https://components.omron.com/eu
China
https://components.omron.com.cn
Japan
https://components.omron.com/jp
© OMRON Corporation 2018-2022 All Rights Reserved.
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. G133-E1-07
0922 (0818)
