XM2F-0940-132L

D-sub Connectors XM3-L/XM2-L/ XM4K/XM4L The D-sub Connector Series Enters a New Era with Lead-free Products. * ■ Determine anchor screw diameters at a glance. ■ Greatly simplified anchor combinations. ■ Shielded against EMI. ■ The XM3-L/XM2-L/XM4K/XM4L conform to UL standards (No. E103202) (Some models are not included) RoHS Compliant * Some models are not included. ■ Connectors Classification D-sub Connectors Model XM3B-L XM2C-L XM2E-L XM2F-L Type Sockets with Right-angle DIP Terminals Plugs with Right-angle DIP Terminals Plugs with Straight DIP Terminals Sockets with Straight DIP Terminals Appearance Classification High-density D-sub Connectors Model XM4K XM4L XM4L Type Plugs with Right-angle DIP Terminals Sockets with Right-angle DIP Terminals Sockets with Straight DIP Terminals Appearance ■ Ratings and Characteristics Rated current 3A Rated voltage 300 VAC Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.) Insulation resistance 1,000 MΩ min. (at 500 VDC) Dielectric strength 1,000 VAC for 1 min (leakage current: 1 mA max.) Insertion durability 100 times Ambient operating temperature − 25 to 105°C (with no condensation or icing) ■ Materials and Finish Housing Contact PBT (UL94 V-0)/black Socket Mating end Phosphor bronze/nickel base, flash gold plated Terminal Plug Mating end Brass/Nickel base, flash gold plated Terminal Shell Steel Anchors Grounding Fixture Steel Straight Brass/Tin plated Right angle Brass/Nickel plated 1 XM3-L/XM2-L/XM4K/XM4L D-sub Connectors ■ Ordering Information D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No anchors Anchor 2 (XM4Z-0011) M2.6 × 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC No. of contacts 9 XM3B-0942-502L XM3B-0942-112L XM3B-0942-132L 15 XM3B-1542-502L XM3B-1542-112L XM3B-1542-132L 25 XM3B-2542-502L XM3B-2542-112L XM3B-2542-132L D-sub Plugs with Right-angle DIP Terminals Appearance Accessories No anchors Anchor 2 (XM4Z-0011) M2.6 × 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC No. of contacts 9 XM2C-0942-502L XM2C-0942-112L XM2C-0942-132L 15 XM2C-1542-502L XM2C-1542-112L XM2C-1542-132L 25 XM2C-2542-502L XM2C-2542-112L XM2C-2542-132L D-sub Plugs with Straight DIP Terminals Appearance Accessories No anchors Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 × 0.45 No. of contacts Anchor 2 (XM4Z-1013) #440 UNC 9 XM2E-0940-L XM2E-0940-502L XM2E-0940-112L XM2E-0940-132L 15 XM2E-1540-L XM2E-1540-502L XM2E-1540-112L XM2E-1540-132L 25 XM2E-2540-L XM2E-2540-502L XM2E-2540-112L XM2E-2540-132L D-sub Sockets with Straight DIP Terminals Appearance Accessories No anchors Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 × 0.45 No. of contacts Anchor 2 (XM4Z-1013) #440 UNC 9 XM2F-0940-L XM2F-0940-502L XM2F-0940-112L XM2F-0940-132L 15 XM2F-1540-L XM2F-1540-502L XM2F-1540-112L XM2F-1540-132L 25 XM2F-2540-L XM2F-2540-502L XM2F-2540-112L XM2F-2540-132L Note: For other models with Anchors, contact your OMRON representative. 2 D-sub Connectors XM3-L/XM2-L/XM4K/XM4L High-density D-sub Plugs with Right-angle DIP Terminals Appearance Accessories Anchor 2 (XM4Z-0011) M2.6 × 0.45 No anchors Anchor 2 (XM4Z-0013) #4-40 UNC No. of contacts 15 XM4K-1542-502 XM4K-1542-112 XM4K-1542-132 High-density D-sub Sockets with Right-angle DIP Terminals Appearance Accessories Anchor 2 (XM4Z-0011) M2.6 × 0.45 No anchors Anchor 2 (XM4Z-0013) #4-40 UNC No. of contacts 15 XM4L-1542-502 XM4L-1542-112 XM4L-1542-132 High-density D-sub Sockets with Straight DIP Terminals Appearance Accessories Anchor 2 (XM4Z-1011) M2.6 × 0.45 No anchors Anchor 2 (XM4Z-1013) #4-40 UNC No. of contacts 15 XM4L-1541-502 XM4L-1541-112 XM4L-1541-132 Note: For other models with Anchors, contact your OMRON representative. Anchor 2 (Screw Head Length: 5.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC M2.6 × 0.45 M3 × 0.5 #4-40 UNC Model XM4Z-0011 XM4Z-0012 XM4Z-0013 XM4Z-1011 XM4Z-1012 XM4Z-1013 Anchor 3 (Screw Head Length: 4.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC M2.6 × 0.45 M3 × 0.5 #4-40 UNC Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 D-sub Connectors XM3-L/XM2-L/XM4K/XM4L 3 ■ Dimensions (unit: mm) D-sub Sockets with Right-angle DIP Terminals XM3B-0942-132L XM3B-1542-132L XM3B-2542-132L Mounting holes (t = 1.6 mm, bottom view) A B C Board edge #4-40 UNC 2.77 N, 1±0.1 dia. Two, 3.05±0.1 dia. 2.84 8.1±0.1 2.84±0.1 7.9 (3.9) 1.6 No. of contacts (N) 5.8 5.8 2.77±0.1 B±0.1 Dimensions 12.55 18.4 8.1 2.84 D±0.1 A B C D 9 30.8 24.99 16.33 6.96 15 39.1 33.32 24.66 6.96 25 53.0 47.04 38.38 6.91 3.18 D-sub Plugs with Right-angle DIP Terminals XM2C-0942-132L XM2C-1542-132L XM2C-2542-132L Mounting holes (t = 1.6 mm, bottom view) A B C Board edge #4-40 UNC 2.77 Two, 3.05±0.1 dia. 2.84 N, 1±0.1 dia. 8.1±0.1 2.84±0.1 8.3 D±0.1 2.77±0.1 B±0.1 (3.9) 1.6 Dimensions 12.55 No. of contacts (N) 6 5.8 18.6 8.1 2.84 3.18 A B C D 9 30.8 24.99 16.92 6.96 15 39.1 33.32 25.25 6.96 25 53.0 47.04 38.96 6.91 D-sub Plugs with Straight DIP Terminals XM2E-0940-132L XM2E-1540-132L XM2E-2540-132L A B C 2.77 Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC Two, 3.2 +−00.1 dia. N, 1±0.1 dia. 2.84 2.84±0.1 8.3 2.77±0.1 B±0.1 12.55 Dimensions 5.8 6 0.35 4 D-sub Connectors 0.6 dia. D No. of contacts (N) 7 6.2 3.4 3.8 3.25 E±0.1 2.84 10.7 XM3-L/XM2-L/XM4K/XM4L A B C D E 9 30.8 24.99 16.92 19.23 6.96 15 39.1 33.32 25.25 27.56 6.96 25 53.0 47.04 38.96 41.28 6.91 D-sub Sockets with Straight DIP Terminals XM2F-0940-132L XM2F-1540-132L XM2F-2540-132L (unit: mm) A B C Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC 2.77 Two, 3.2 +−0.1 dia. N, 1±0.1 dia. 0 2.84 2.84±0.1 7.9 E±0.1 2.77±0.1 B±0.1 12.55 Dimensions 5.8 5.8 0.35 3.2 3.8 2.84 0.6 dia. D 3.25 No. of contacts (N) 7 6.2 10.7 A B C D E 9 30.8 24.99 16.33 19.23 6.96 15 39.1 33.32 24.66 27.56 6.96 25 53.0 47.04 38.38 41.28 6.91 High-density D-sub Plugs with Right-angle DIP Terminals XM4K-1542-132 30.8 Mounting holes (t = 1.6 mm, bottom view) 24.99 16.92 Board edge 2.29 0.25 1.145 #4-40 UNC 1.98 Two, 3.05±0.1 dia. 1 6 11 5 10 15 2.29±0.1 1.145 11 8.3 8.89±0.1 2.54±0.1 2.54±0.1 15 10 6 5 1 1.98 7.67±0.1 0.25 0.1 Fifteen, 1.0 + −0 dia. 24.99±0.1 1.6 12.55 6 5.8 2.54 8.89 22.2 2.54 2.54 3.5 (3.94) High-density D-sub Sockets with Right-angle DIP Terminals XM4L-1542-132 30.8 24.99 16.33 2.29 Mounting holes (t = 1.6 mm, bottom view) Board edge 0.25 #4-40 UNC 1.145 7.67±0.1 Two, 3.05±0.1 dia. 1.98 5 10 15 2.29±0.1 8.89±0.1 1.145 1 6 11 7.9 2.54±0.1 2.54±0.1 1.98 1.6 5.8 15 11 10 6 5 1 0.25 0.1 Fifteen, 1.0 + −0 dia. 24.99±0.1 12.55 5.8 2.54 8.89 22.2 2.54 2.54 3 (3.94) D-sub Connectors XM3-L/XM2-L/XM4K/XM4L 5 High-density D-sub Sockets with Straight DIP Terminals XM4L-1541-132 (unit: mm) 30.8 24.99 16.33 2.29 Mounting holes (t = 1.6 mm, bottom view) 0.25 #4-40 UNC 1.145 24.99±0.1 1.98 1.145 5 10 15 1 6 11 1.98±0.1 1.98±0.1 7.9 15 10 5 1.98 0.1 Two, 3.2 + dia. −0 0.25 11 6 1 2.29±0.1 7.67±0.1 0.1 Fifteen, 0.8 + −0 dia. 12.55 5.8 5.8 0.35 7 6.2 3.8 3.25 3.4 2.8 1.98 0.6 dia. 19.23 3.96 10.7 Anchor 3 Anchor 2 XM4Z-0011 M2.6 × 0.45 5 #4-40 UNC M2.6 × 0.45 5 5.8 11.8 XM4Z-0012 M3 × 0.5 #4-40 UNC 5 5.8 11.8 XM4Z-0013 5 #4-40 UNC #4-40 UNC 5 5.8 11.8 A min. No. of contacts (N) 5 4.8 15 5 4.8 10 XM4Z-1023 #4-40 UNC #4-40 UNC 5 5.8 10 #4-40 UNC 4.8 #4-40 UNC 5 #4-40 UNC 4.8 11.8 10 Dimensions: Panel Mounted (Using Anchor 3 or M3 Screws) Dimensions A±0.1 B min. Two, 3.2±0.1 dia. 11.4 min. No. of contacts (N) A B 9 (See note.) 24.99 20.5 39.4 4-R3.4 10° 15 33.32 28.8 25 47.04 42.5 Note: 1. Two Anchors are required per Note: The XM4K and Connector. XM4L use 9-contact 2. Applicable panel thickness is dimensions. less than 1.2 mm. Note: 2 anchors are necessary per connector. D-sub Connectors #4-40 UNC 11.8 XM4Z-0023 53.3 Note: 1. Two Anchors are required per 25 Connector. Note: The XM4K and 2. Applicable panel thickness is XM4L use 9-conless than 1.2 mm. tact dimensions. 6 M3 × 0.5 4.8 9 (See note.) 31.0 4-R2.5 4.8 10 #4-40 UNC 5 5.8 10 A #4-40 UNC XM4Z-1022 M3 × 0.5 #4-40 UNC Dimensions 11.4 min. 6.4 min. M2.6 × 0.45 11.8 5.8 2-R3.2 #4-40 UNC XM4Z-0022 Dimensions: Not Panel Mounted (Using Anchor 2) 5.8 5 5.8 10 XM4Z-1013 #4-40 UNC XM4Z-1021 M2.6 × 0.45 #4-40 UNC XM4Z-1012 M3 × 0.5 5 XM4Z-0021 XM4Z-1011 XM3-L/XM2-L/XM4K/XM4L Combination of hexagonal anchors for each connector (in post installation) Type DIP Right-angle socket Model XM4L-1542-502 Without panel insertion With panel insertion Commercially available nut XM4Z-001@ XM4Z-002@ Not necessary XM4Z-001@ XM4Z-002@ Not necessary XM4Z-101@ XM4Z-102@ XM3B-@@42-502L DIP Right-angle plug XM4K-1542-502 XM2C-@@42-502L DIP straight socket XM4L-1541-502 XM2F-@@40-L XM2F-@@40-502L DIP straight plug XM2E-@@40-L Not necessary Necessary Not necessary XM4Z-101@ XM2E-@@40-502L XM4Z-102@ Necessary Not necessary D-sub Connectors XM3-L/XM2-L/XM4K/XM4L 7 ■ Precautions Correct Use ●Grounding (Lock Pin Grounding Fixture) • To ground, provide copper foil around the Connector Attachment hole on the board, assemble the connector and grounding fixture, and dip in solder as shown below. • Insert the connector into the PCB and then simultaneously dip-solder the connector terminals and lock pin to the board. Lock pin grounding fixture PCB (t = 1.6 mm) Approx. 1.9 ●Soldering Automated Soldering Conditions (Jet Flow) 1. Soldering temperature: 250 ±5°C 2. Continuous soldering time: Within 5±1 s ●Tightening Torque of Anchor and Grounding Fixture If the anchor is secured to the connector, be sure to tighten it to a torque of 0.49 N·m. Also, use a proper size tool to do this work. ●Mating Do not connect the Connectors in the wrong direction, otherwise it may be damaged. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company 8 D-sub Connectors Contact: www.omron.com/ecb XM3-L/XM2-L/XM4K/XM4L Cat. No. G060-E1-02 1014(0412)(O)