Round Water-resistant Connectors (M8/S8)
XS3
Small Round Water-resistive
Connectors
• Water-resistive, compact connector meets IP67 requirements.
• Conventional M8 screw-on models are available along with S8
snap-in models that connect and disconnect with one touch.
• XS3-R Series; connectors with cables are available.
M8 models are UL certified.
• Oil-resistant Polyurethane Robot Cables added.
• M8-M12 conversion cables are also available.
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
Refer to Safety Precautions on page 26.
Model Number Legend
Connectors with Cables Model Number Legend
Connector
Cable specifications
Robot cable
Connectors on both cable ends
Oil-resistant polyurethane
robot cable
Standard cable
Connector on one cable end
(Socket)
Robot cable
Oil-resistant polyurethane
robot cable
PUR (low-temperature use)
cable
Connector on one cable end
(Plug)
Robot cable
Oil-resistant polyurethane
robot cable
XS3: M8 screw connection
Cable length (m)
1
2
5
10
1
2
5
10
2
5
10
1
2
5
10
2
5
10
2
5
0.3
1
2
5
Model
XS3W-M421-401-R
XS3W-M421-402-R
XS3W-M421-405-R
XS3W-M421-410-R
XS3W-M421-401-PR
XS3W-M421-402-PR
XS3W-M421-405-PR
XS3W-M421-410-PR
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M421-410-A
XS3F-M421-401-R
XS3F-M421-402-R
XS3F-M421-405-R
XS3F-M421-410-R
XS3F-M421-402-PR
XS3F-M421-405-PR
XS3F-M421-410-PR
XS3F-M421-402-L
XS3F-M421-405-L
XS3H-M421-4C3-R
XS3H-M421-401-R
XS3H-M421-402-PR
XS3H-M421-405-PR
Reference page
3
10
16
Note: Only DC, straight, and 4-core types are shown in this table. Refer to the relevant pages for other products.
1
XS3
Ratings and Specifications
Item
Model
XS3F-M52@-5@@-A
XS3F/H/W/P/M
Rated current
1 ADC
3 ADC
Rated voltage
125 VDC *2
30 VDC
XS3M-M524-1@
XS3R
1 ADC
125 VDC
Contact resistance
(connector)
40 mΩ max. (20 mV max., 100mA max.)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
(connector)
1,000 VAC for 1 min
(leakage current: 1 mA
max.)
Degree of protection
IP67 (IEC60529)
Insertion tolerance
200 times
Cable tensile strength *1
49 N/15 s
Ambient operating
temperature range
−25 to 70°C *3
Ambient humidity range
20 to 85%RH
60 mΩ max.
(20 mV max., 100 mA max.)
650 VAC for 1 min (leakage current: 1 mA max.)
1,000 VAC for 1 min
(leakage current: 1 mA
max.)
−25 to 85°C
−25 to 70°C
*1. Models with cable only
*2. Except 5 poles
*3. Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.
Materials and Finish
Connector
Type
Item
M8
Model
XS3F/H/W/R
S8
XS3F/W
(Socket side)
XS3M-M524-1@
XS3P/M *1
Contacts
Phosphor bronze/
Brass/nickel base,
nickel base, gold
gold plating
plating
Fixture
Brass/nickel plating or SUS316L
Contact block
PBT resin (UL94 V-0)
O-ring
Rubber
Cover
Soft PBT resin *2
XS3H/W
(Plug side)
XS3P
Phosphor bronze/
Brass/nickel base,
nickel base, gold
gold plating
plating
—
—
Brass/nickel plating
—
TPEE
—
*1. Except 5 poles
*2. Except XS3R-M426-4050-PR. Material of the cover of XS3R-M426-4050-PR: PBT resin
Note: The XS3M is for both M8 and S8.
Cables
Item
Poles
3 poles
4 poles
Standard cable
4 mm dia, AWG24 (0.2 mm2)
Robot Cable
4 mm dia, AWG24
Oil-resistant polyurethane
robot cable
5 poles
4.7 mm dia, AWG24 (0.2 mm2)
—
4.7 mm dia, AWG23 (0.3 mm2)
—
—
Note: Only the XS3F (socket) is available with 5 poles.
Pin Arrangement (Engaged Side)
Item
Poles
Male (plug)
contacts
3 poles
4
1
3
4 poles
2
4
1
3
5 poles
2
4
1
3
5
DC
Female (socket)
contacts
4
3
1
4
2
3
1
4
2
3
1
5
2
XS3
XS3W Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug)
Model Number Structure
Model Number Legend
Use this model number legend to identify products from their model number. Use this model number legend to identify products
from their model number. When ordering, use a model number from the table in Ordering Information.
XS3W-@@2@-@@@-@
1
2
3
4
1. Fastening
Method
M: M8
S: S8
5
6
3. Cable Connection
Direction
1: Straight (socket)/
Straight (plug)
2: Right-angle (socket)/
Right-angle (plug)
2. Connector
3: Straight (socket)/
Poles
Right-angle (plug)
3: 3 poles
4: Right-angle (socket)/
4: 4 poles
Straight (plug)
4. Connections (Numbers inside
circles are terminal numbers)
3: ➀ Brown, ➁ Blue, ➂ Black
4: ➀ Brown, ➁ White,
➂ Blue, ➃ Black
5. Cable Length
01: 1 m
02: 2 m
05: 5 m
10: 10 m
6. Cable Specifications
R : Robot cable
PR : Oil-resistant polyurethane
robot cable
Ordering Information
M8 Screw-on Connectors
Cable specifications
No. of cable
cores
3
Cable connection direction
Straight (Socket)/Straight (Plug)
Straight (Socket)/Straight (Plug)
Robot cable
4
Right-angle (Socket)/Right-angle (plug)
Straight (Socket)/Right-angled (Plug)
Right-angle (Socket)/Straight (Plug)
Straight (Socket)/Straight (plug)
Oil-resistant
polyurethane robot cable
Right-angle (Socket)/Right-angle (Plug)
4
Straight (Socket)/Right-angled (Plug)
Right-angle (socket)/Straight (Plug)
Cable length
L (m)
Model
1
XS3W-M321-301-R
2
XS3W-M321-302-R
5
XS3W-M321-305-R
10
XS3W-M321-310-R
1
XS3W-M421-401-R
2
XS3W-M421-402-R
5
XS3W-M421-405-R
10
XS3W-M421-410-R
2
XS3W-M422-402-R
5
XS3W-M422-405-R
2
XS3W-M423-402-R
5
XS3W-M423-405-R
2
XS3W-M424-402-R
5
XS3W-M424-405-R
1
XS3W-M421-401-PR
2
XS3W-M421-402-PR
5
XS3W-M421-405-PR
10
XS3W-M421-410-PR
1
XS3W-M422-401-PR
2
XS3W-M422-402-PR
5
XS3W-M422-405-PR
1
XS3W-M423-401-PR
2
XS3W-M423-402-PR
5
XS3W-M423-405-PR
1
XS3W-M424-401-PR
2
XS3W-M424-402-PR
5
XS3W-M424-405-PR
UL
UL2238
certified
(File no.
E207683)
---
3
XS3
S8 Snap-in Connectors
Cable specifications
No. of cable
cores
Cable connection direction
Straight (Socket)/Straight (Plug)
Robot cable
4
Right-angle (Socket)/Right-angle (Plug)
Straight (Socket)/Right-angled (Plug)
Right-angle (Socket)/Straight (Plug)
Cable length
L (m)
Model
1
XS3W-S421-401-R
2
XS3W-S421-402-R
5
XS3W-S421-405-R
2
XS3W-S422-402-R
5
XS3W-S422-405-R
2
XS3W-S423-402-R
5
XS3W-S423-405-R
2
XS3W-S424-402-R
5
XS3W-S424-405-R
UL
---
Note: Ask your OMRON representative about other cable lengths.
Ratings and Specifications
Pin Arrangement (Engaged Side)
Item
No. of poles
3 poles
4
Male (plug) contacts
1
Female (socket)
contacts
3
3
4 poles
2
4
1
3
4
2
3
1
DC type
4
1
Connections
Model
Socket side
XS3W (M8)
XS3M (M8/S8)
XS3H (M8)
XS3W (S8)
XS3M (M8/S8)
XS3H (S8)
Plug side
XS3F (M8)
XS3W (M8)
XS3P (M8)
XS3F (S8)
XS3W (S8)
XS3P (S8)
Note 1. Cables can be extended with more than one XS3W.
2. M8 screw models and S8 snap-in models cannot be connected to each other.
3. Only plugs and sockets with the same poles can be connected to each other.
4
XS3
Dimensions
(Unit: mm)
M8 Screw-on Connectors with Robot Cable
Straight (Socket)/Straight (Plug)
XS3W-M321-3@@-R (3 poles)
M8 × 1.0
Socket
4
3
4 dia.
M8 × 1.0
Plug
4
10 dia.
9 dia.
1
3
1
32
31.4
L
XS3W-M421-4@@-R (4 poles)
M8 × 1.0
M8 × 1.0
4
4 dia.
Socket
2
9 dia.
3
Four, 1 dia.
Plug
2
4
1
3
10 dia.
1
32
31.4
L
Straight (Socket)/Right-angle (Plug)
XS3W-M423-4@@-R (4 poles)
L
M8 × 1.0
18.9
31.4
4
2
3
1
9 dia.
21.1
Socket
4 dia.
Plug
M8 × 1.0 10 dia.
Right-angle (Socket)/Right-angle (Plug)
XS3W-M422-4@@-R (4 poles)
1
2
3
4
Four, 1 dia.
L
18.9
20.5
Socket
18.9
4 dia.
M8 × 1.0
9 dia.
2
21.1
Plug
10 dia.
1
4
1
2
3
4
3
M8 × 1.0
Right-angle (Socket)/Straight (Plug)
XS3W-M424-4@@-R (4 poles)
Four, 1 dia.
L
18.9
Four, 1 dia.
32
2
4
1
3
10 dia.
20.5
Socket
4 dia.
Plug
M8 × 1.0
9 dia.
2
1
4
3
M8 × 1.0
5
XS3
M8 Screw-on Connectors with Oil-resistant Polyurethane Robot Cable
Straight (Socket)/Straight (Pug)
XS3W-M421-4@@-PR (4 poles)
Four, 1 dia. 2.15
2
M8 × 1
Plug
Molded part (black)
4.7 dia.
2.15 M8 × 1.0
Socket
4
4
10 dia.
1.95 0.5
1
2
9 dia.
3
3
1.95 0.5
32
3.4
3.4
L
Straight (Socket)/Right-angle (Plug)
XS3W-M423-4@@-PR (4 poles)
1
31.4
Plug
Molded part (black)
10 dia. M8 × 1
Socket
2.15 M8 × 1.0
4.7 dia.
4
2
9 dia.
1.95 0.5
21.1
3
1
21.5
3.4
31.4
24.9
L
Four, 1 dia.
4
3
2
1
3.4
2.15
0.5
1.95
Right-angle (Socket)/Right-angle (Plug)
XS3W-M422-4@@-PR (4 poles)
Molded part (black)
Plug
10 dia.
Socket
4.7 dia.
9 dia.
20.5
21.1
M8 × 1
24.9
24.9
L
Four, 1 dia.
4
3
2
1
1.95
0.5
3
3.4
2.15
4
2.15
3.4
2
1
0.5
1.95
Four, 1 dia.
Right-angle (Socket)/Straight (Plug)
XS3W-M424-4@@-PR (4 poles)
Molded part (black)
Four, 1 dia. 2.15
M8 × 1
2
4
1
3
Plug
4.7 dia.
Socket
9 dia.
10 dia.
1.95 0.5
20.5
21.5
3.4
32
24.9
L
1.95
0.5
3
4
2.15
3.4
1
2
Four, 1 dia.
Wiring Diagram
3 Cores
4 Cores
Cable lead colors
Pin No.
1
1
Brown
3
4
3
4
Blue
Black
Socket
Plug
Cable lead colors
Pin No.
1
2
3
4
1
2
3
4
Socket
Brown
White
Blue
Black
Plug
6
XS3
S8 Snap-in Connectors with Robot Cable
Straight (Socket)/Straight (Plug)
XS3W-S421-4@@-R (4 poles)
Socket
4
2
3
1
Plug
4 dia.
Four, 1 dia.
2
4
1
3
8.2 dia.
8.2 dia.
30.7
30.7
L
Right-angle (Socket)/Right-angle (Plug)
XS3W-S422-4@@-R (4 poles)
L
18.9
19.8
18.9
Socket
19.8
Plug
4 dia.
8.2 dia.
8.2 dia.
1
2
Four, 1 dia.
1
2
3
4
4
3
M8 × 1.0
Straight (Socket)/Right-angle (Plug)
XS3W-S423-4@@-R (4 poles)
L
18.9
30.7
4
2
3
1
8.2 dia.
Socket
4 dia.
19.8
Plug
8.2 dia.
Four, 1 dia.
Right-angle (Socket)/Straight (Plug)
XS3W-S424-4@@-R (4 poles)
1
2
3
4
L
Four, 1 dia.
30.7
18.9
2
4
1
3
8.2 dia.
19.8
Socket
4 dia.
Plug
8.2 dia.
2
1
4
3
M8 × 1.0
Wiring Diagram
4 Cores
Cable lead colors
Pin No.
1
2
3
4
1
2
3
4
Socket
Brown
White
Blue
Black
Plug
7
XS3
with Cables, Connectors on Both Cable Ends
XS3W Connectors
(M8 Socket/M12 Plug or M8 Plug/M12 Socket)
Model Number Structure
Model Number Legend
Use this model number legend to identify products from their model number. Use this model number legend to identify products
from their model number. When ordering, use a model number from the table in Ordering Information.
XS3W-M@2@-@C2-A
1
2
1. Fastening Method
M: M8
2. Connector Poles
3: 3 poles
4: 4 poles
3
4
5
6
3. Cable Connection Direction
C: M8 screw-on, straight (socket)
/M12 Smartclick, straight (plug)
D: M12 Smartclick, straight (socket)
/M8 screw-on, straight (plug)
5. Cable Length
C2: 20 cm
6. Cable Specifications
A: Standard cable
4. Connections (Numbers inside circles are
terminal numbers)
3: ➀ Brown, ➁ Blue, ➂ Black
4: ➀ Brown, ➁ White, ➂ Blue, ➃ Black
Ordering Information
Cable specifications
No. of cable
cores
3
Standard cable
4
Cable connection
direction
Cable length
L (m)
M8 screw-on, straight (Socket)/
M12 Smartclick, straight (Plug)
M12 Smartclick, straight (Socket)/
M8 screw-on, straight (Plug)
M8 screw-on, straight (Socket)/
M12 Smartclick, straight (Plug)
M12 Smartclick, straight (Socket)/
M8 screw-on, straight (Plug)
Model
UL
XS3W-M32C-3C2-A
XS3W-M32D-3C2-A
0.2
--XS3W-M42C-4C2-A
XS3W-M42D-4C2-A
8
XS3
Dimensions
(Unit: mm)
M8 Screw-on Connectors, Straight (Socket)/M12 Smartclick Connectors, Straight (Plug)
XS3W-M32C-3C2-A (3 poles)
XS3W-M42C-4C2-A (4 poles)
200
44.7
2
31.4
(3 cores)
1
14.9 dia.
3
9 dia.
4
3
4
4 dia.
Plug
1
M8 × 1.0
Socket
M12 × 1.0
(4 cores)
1
3
2
4
M8 × 1.0
M12 Smartclick Connectors, Straight (Socket)/M8 screw-on Connectors, Straight (Plug)
XS3W-M32D-3C2-A (3 poles)
XS3W-M42D-4C2-A (4 poles)
200
40.7
1
32
(3 cores)
2
14.9 dia.
4
3
M12 × 1.0
10 dia.
1
4
4 dia.
Socket
3
Plug
M8 × 1.0
(4 cores)
3
1
4
2
M8 × 1.0
Note: For 3-core, M12 connectors, pin 2 is not connected internally.
Wiring Diagram
3 Cores
4 Cores
Cable lead
colors
Pin No.
1
1
Brown
3
4
3
4
Blue
Black
Pin No.
1
2
3
4
Cable lead
colors
1
2
3
4
Brown
White
Blue
Black
For the M12 connectors, one-touch (Smartclick) connectors that
are compatible with previous screw-on M12 connectors are used.
Refer to your OMRON website for details.
XS5 Series
Clic
k!
Insert fully.
Rotate 1/8 turn.
One-touch Connection
9
XS3
XS3F Connectors with Cables, Sockets on One Cable End
Model Number Structure
Model Number Legend
Use this model number legend to identify products from their model number. When ordering, use a model number from the table
in Ordering Information.
XS3F-@@2@-@@@-@
1
2
1. Fastening Method
M: M8
S: S8
E: M8
SUS316L Lock
2. Connector Poles
3: 3 poles
4: 4 poles
5: 5 poles
3
4
5
6
3. Cable Connection Direction
1: Straight
2: Right-angle
4. Connections (Numbers inside
circles are terminal numbers)
3: ➀ Brown, ➁ Blue, ➂ Black
4: ➀ Brown, ➁ White, ➂ Blue,
➃ Black
5: ➀ Brown, ➁ White, ➂ Blue,
➃ Black, ➄ Gray
5. Cable Length
01: 1 m
02: 2 m
05: 5 m
10: 10 m
6. Cable Specifications
A: Standard cable
L: PUR cable (low-temperature use)
R: Robot cable
PR: Oil-resistant polyurethane robot cable
10
XS3
Ordering Information
M8 Screw-on Connectors
Cable specifications
No. of cable
cores
Cable connection direction
Straight
Standard cable
Right-angle
3
Straight
Robot cable
Right-angle
Straight
Standard cable
Right-angle
Straight
Standard SUS316L cable
lock
Right-angle
Straight
Robot cable
4
Right-angle
Straight
Oil-resistant polyurethane
robot cable
Right-angle
Straight
PUR cable
(low-temperature use)
Right-angle
Straight
Standard cable
5
Right-angle
Cable length
L (m)
2
5
2
5
1
2
5
10
2
5
10
2
5
10
2
5
10
2
5
2
5
1
2
5
10
1
2
5
10
2
5
10
1
2
5
10
2
5
2
5
2
5
10
2
5
10
Model
XS3F-M321-302-A
XS3F-M321-305-A
XS3F-M322-302-A
XS3F-M322-305-A
XS3F-M321-301-R
XS3F-M321-302-R
XS3F-M321-305-R
XS3F-M321-310-R
XS3F-M322-302-R
XS3F-M322-305-R
XS3F-M322-310-R
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M421-410-A
XS3F-M422-402-A
XS3F-M422-405-A
XS3F-M422-410-A
XS3F-E421-402-A
XS3F-E421-405-A
XS3F-E422-402-A
XS3F-E422-405-A
XS3F-M421-401-R
XS3F-M421-402-R
XS3F-M421-405-R
XS3F-M421-410-R
XS3F-M422-401-R
XS3F-M422-402-R
XS3F-M422-405-R
XS3F-M422-410-R
XS3F-M421-402-PR
XS3F-M421-405-PR
XS3F-M421-410-PR
XS3F-M422-401-PR
XS3F-M422-402-PR
XS3F-M422-405-PR
XS3F-M422-410-PR
XS3F-M421-402-L
XS3F-M421-405-L
XS3F-M422-402-L
XS3F-M422-405-L
XS3F-M521-502-A
XS3F-M521-505-A
XS3F-M521-510-A
XS3F-M522-502-A
XS3F-M522-505-A
XS3F-M522-510-A
UL
---
UL2238
certified
(File no.
E207683)
---
UL2238
certified
(File no.
E207683)
---
S8 Snap-in Connectors
Cable specifications
No. of cable
cores
Cable connection direction
Straight
Robot cable
4
Right-angle
Cable length
L (m)
1
2
5
1
2
5
Model
XS3F-S421-401-R
XS3F-S421-402-R
XS3F-S421-405-R
XS3F-S422-401-R
XS3F-S422-402-R
XS3F-S422-405-R
UL
---
Note: Ask your OMRON representative about other cable lengths.
11
XS3
Connections
Model
Mating Connectors
XS3F (M8)
XS3M (M8/S8), XS3H (M8), XS3W (M8)
XS3F (S8)
XS3M (M8/S8), XS3H (S8), XS3W (S8)
Note 1. M8 screw models and S8 snap-in models cannot be connected to each other.
2. Only plugs and sockets with the same poles can be connected to each other.
Dimensions
(Unit: mm)
M8 Screw-on Connectors (3 poles)
Straight
XS3F-M321-3@@-A Standard cable
XS3F-M321-3@@-R Robot cable
M8 × 1.0
4 dia.
4
3
1
9 dia.
30
5
50
31.4
L
Right-angle
XS3F-M322-3@@-A Standard cable
XS3F-M322-3@@-R Robot cable
50
L
18.9
4 dia.
30
5
20.5
9 dia.
1
4
3
M8 × 1.0
Wiring Diagram
3 Cores
Pin No.
Cable lead colors
1
Brown
3
4
Blue
Black
12
XS3
M8 Screw-on Connectors (4 poles)
Straight
XS3F-M421-4@@-A Standard cable
XS3F-M421-4@@-R Robot cable
M8 × 1.0
4
2
3
1
4 dia.
9 dia.
30
5
50
31.4
L
Right-angle
XS3F-M422-4@@-A Standard cable
XS3F-M422-4@@-R Robot cable
50
L
18.9
30
20.5
5
4 dia.
9 dia.
1
2
4
3
M8 × 1.0
M8 SUS316L Lock (4 poles)
Straight
XS3F-E421-402-A Standard cable
XS3F-E421-405-A Standard cable
2.15 M8 × 1.0
12.9
4
2
3
1
4 dia.
9 dia.
1.95 0.5
21.5
3.4
30
5
50
31.4
L
Right-angle
XS3F-E422-402-A Standard cable
XS3F-E422-405-A Standard cable
50
L
23.1
20.5
30
5
4 dia.
9 dia.
2
1
3.4
4
2.15
M8 × 1.0
3
0.5
1.95
Wiring Diagram
4 Cores
Pin No.
1
2
3
4
Cable lead colors
Brown
White
Blue
Black
13
XS3
M8 Screw-on Connectors (4 poles)
Straight
Oil-resistant polyurethane robot cable
XS3F-M421-4@@-PR
PUR cable
XS3F-M421-4@@-L
L
31.4
4.7 dia.
4
2
3
1
9 dia.
M8 × 1
5
50
Right-angle
Oil-resistant polyurethane robot cable
XS3F-M422-4@@-PR
PUR cable
XS3F-M422-4@@-L
L
24.9
4.7 dia.
20.5
5
Molded part (black)
50
9 dia.
M8 × 1
2
1
3.4
2.15
3
4
0.5
1.95
M8 Screw-on Connectors (5 poles)
Straight
XS3F-M521-5@@-A Standard cable
1.95
M8 × 1.0
4.7 dia.
2
1.45
4
1.35
1
3
5
9 dia.
0.35
21.5
3.4
30
Right-angle
XS3F-M522-5@@-A Standard cable
5
50
L
31.4
L
4.7 dia.
24.9
20.5
5
30
50
9 dia.
M8 × 1.0
0.35
2
1
5
3.4
1.95
4
3
1.35
1.45
Wiring Diagram
5 Cores
4 Cores
Pin No.
1
2
3
4
Cable lead colors
Brown
White
Blue
Black
Pin No.
2
4
1
3
5
Cable lead colors
Brown
White
Blue
Black
Gray
14
XS3
S8 Snap-in Connectors (4 poles)
Straight
XS3F-S421-4@@-R Robot cable
4 dia.
4
2
3
1
8.2 dia.
30
5
50
30.7
L
Right-angle
XS3F-S422-4@@-R Robot cable
50
L
18.9
30
5
19.8
4 dia.
8.2 dia.
2
1
4
3
Wiring Diagram
4 Cores
Pin No.
1
2
3
4
Cable lead colors
Brown
White
Blue
Black
15
XS3
XS3H Plugs on One Cable End
Model Number Structure
Model Number Legend
Use this model number legend to identify products from their model number. When ordering, use a model number from the table
in Ordering Information.
XS3H-@@2@-@@@-@
1
2
3
1. Fastening Method
4
5
6
3. Cable Connection Direction
M: M8
S: S8
1: Straight
2: Right-angle
2. Connector Poles
3: 3 poles
4: 4 poles
4. Connections (Numbers inside
circles are terminal numbers)
3: ➀ Brown, ➁ Blue, ➂ Black
4: ➀ Brown, ➁ White, ➂ Blue,
➃ Black
5. Cable Length
C3: 0.3 m
01: 1 m
02: 2 m
05: 5 m
6. Cable Specifications
R: Robot cable
PR: Oil-resistant polyurethane robot cable
Ordering Information
M8 Screw-on Connectors
Cable specifications
No. of cable
cores
Cable connection direction
3
Straight
Straight
Robot cable
4
Right-angle
Straight
Oil-resistant polyurethane
robot cable
4
Right-angle
Cable length
L (m)
Model
0.3
XS3H-M321-3C3-R
1
XS3H-M321-301-R
0.3
XS3H-M421-4C3-R
1
XS3H-M421-401-R
0.3
XS3H-M422-4C3-R
1
XS3H-M422-401-R
2
XS3H-M421-402-PR
5
XS3H-M421-405-PR
1
XS3H-M422-401-PR
2
XS3H-M422-402-PR
5
XS3H-M422-405-PR
UL
UL2238
certified
(File no.
E207683)
---
Note: Ask your OMRON representative about other cable lengths.
S8 Snap-in Connectors
Cable specifications
No. of cable
cores
Cable connection direction
Straight
Robot cable
4
Right-angle
Cable length
L (m)
Model
0.3
XS3H-S421-4C3-R
1
XS3H-S421-401-R
0.3
XS3H-S422-4C3-R
1
XS3H-S422-401-R
UL
---
Connections
Model
Mating Connectors
XS3H (M8)
XS3F (M8), XS3W (M8), XS3P (M8)
XS3H (S8)
XS3F (S8), XS3W (S8), XS3P (S8)
Note 1. M8 screw models and S8 snap-in models cannot be connected to each other.
2. Only plugs and sockets with the same poles can be connected to each other.
16
XS3
Dimensions
(Unit: mm)
M8 Screw-on Connectors (3 poles)
Straight
XS3H-M321-3@@-R Robot Cable
M8 × 1.0
4 dia.
4
3
1
10 dia.
30
5
50
32
L
M8 Screw-on Connectors (4 poles)
Straight
XS3H-M421-4@@-R Robot Cable
Four, 1 dia.
4 dia.
M8 × 1.0
2
4
1
3
10 dia.
30
5
50
32
L
Right-angle
XS3H-M422-4@@-R Robot Cable
50
L
18.9
20.1
30
5
4 dia.
M8 × 1.0
10 dia.
Four, 1 dia.
4
3
2
1
Wiring Diagram
4 Cores
3 Cores
Pin No.
Cable lead colors
1
Brown
3
4
Blue
Black
Pin No.
1
2
3
4
Cable lead colors
Brown
White
Blue
Black
17
XS3
M8 Screw-on Connectors (4 poles)
Straight
XS3H-M421-4@@-PR Oil-resistant Polyurethane Robot Cable
2.15
M8 × 1.0
Four, 1 dia.
2
1.95
4
3 10 dia.
1
0.5
4.7 dia.
3.4
5
32
L
50
Right-angle
XS3H-M422-4@@-PR Oil-resistant Polyurethane Robot Cable
L
24.9
4.7 dia.
21.1
5
Molded part (black)
50
M8 × 1
10 dia.
Four, 1 dia.
4
3
2
1
3.4
2.15
0.5
1.95
S8 Snap-in Connectors (4 poles)
Straight
XS3H-S421-4@@-R Robot Cable
Four, 1 dia.
4 dia.
2
4
1
3
8.2 dia.
30
5
50
30.7
L
Right-angle
XS3H-S422-4@@-R Robot Cable
50
L
18.9
30
5
19.8
4 dia.
8.2 dia.
Four, 1 dia.
4
3
2
1
Wiring Diagram
4 Cores
Pin No.
1
2
3
4
Cable lead colors
Brown
White
Blue
Black
18
XS3
XS3P Panel-mounting Sockets for Terminal Boxes
Ordering Information
Connection method
Connector
Poles
Panel mounting
Pin shape
Front lock or rear lock
M8 screw-on
4
Rear lock
S8 snap-in
Front lock or rear lock
Applicable wires
Model
UL
—
AWG24 max.
AWG24 max.
—
AWG24 max.
XS3P-M421-1
XS3P-M421-2
XS3P-M422-2
XS3P-S421-1
XS3P-S421-2
---
DIP pins
Solder cup pins
Solder cup pins
DIP pins
Solder cup pins
Connections
Model
XS3P (M8)
XS3P (S8)
Mating Connectors
XS3H (M8), XS3W (M8)
XS3H (S8), XS3W (S8)
Note 1. M8 screw models and S8 snap-in models cannot be connected to each other.
2. Only plugs and sockets with the same poles can be connected to each other.
Dimensions
(Unit: mm)
M8 Screw-on Connectors
XS3P-M421-1 (DIP Pins)
Front lock or rear lock
1.8
Four, 1 dia.
1.95
XS3P-M421-2 (Solder Cup Pins)
Front lock or rear lock
16
7.2
2.15
24.9
12.5
7.2
1.8
16
2.15
2.15
0.5
0.5
18 dia.
3.4
M12 × 1.0
2.5
9.4
M12 × 1.0
1.5
M12 × 1.0 nut
3.4
1.95
1.95
24.3
12.5
7.2
2.15
1.2 dia.
0.5
0.5
Solder cup
hole
0.8 dia. × 2.5
18 dia.
3.4
M8 × 1.0
M12 × 1.0
9.4
9.7
Rubber
bushing
7.2
M12 × 1.0
1.5
2.5
M12 × 1.0 nut
3.4
1.95
M8 × 1.0
9.7
Rubber
bushing
XS3P-M422-2 (Solder Cup Pins),
Rear Lock Slim Models
10
13.2
2
7
(0.3)
2.15
6
1.95
11.5 dia.
M8 × 1.0
M8 × 0.5
M8 × 0.5 nut 2
Rubber
bushing
3.4
10
S8 Snap-in Connectors
XS3P-S421-1 (DIP Pins)
Front lock or rear lock
Four, 1 dia.
XS3P-S421-2 (Solder Cup Pins)
Front lock or rear lock
1.8
16
7.2
2.15
1.95
24.9
12.5
7.2
1.8
16
2.15
0.5
0.5
18 dia.
M12 × 1.0
2.5
3.4
9.4
M12 × 1.0 nut
M12 × 1.0
1.5
Rubber
bushing
1.95
1.95
9.5
2.15
24.3
12.5
7.2
2.15
1.2 dia.
0.5
Solder cap
hole
0.8 dia. × 2.5
18 dia.
3.4
3.4
7.2
9.4
M12 × 1.0
2.5
M12 × 1.0 nut
0.5
M12 × 1.0
1.5
Rubber
bushing
1.95
3.4
9.5
19
XS3
Mounting Dimensions for XS3P Screw-on Models and Snap-in Models
Panel Cutout
XS3P-@421-@
PCB-mounting Dimensions
XS3P-M422-2
+0.2
0
9.8
24 min.
Land
2.15
+0.2
8.2 0
+0.2
0 dia.
12
Panel-mounting
Dimensions
Rear lock
Front Lock
Panel
Panel
0.5 1.95
Four, 1.2 dia.
24 min.
3.4
+0.2
0
7.2
Note: The panel thickness is 1 to 3 mm.
Note: The panel thickness is 2.4 mm
maximum.
Nut
Rubber
bushing
Rubber
bushing
Nut
Safety Precautions
Refer to Safety Precautions on page 26.
Precautions for Correct Use
Panel-Mounting
• When mounting XS3P Panel-mounting Connectors to
panels, refer to Panel-mounting Dimensions and provide
rubber bushings and nuts for the Connectors. Apply a
tightening torque of between 0.4 and 0.6 N·m to mount the
Connectors.
20
XS3
XS3M Sensor-Embedded Plugs
Ordering Information
Mounting method
Connector Poles
Embedded model
4
Pin shape
DIP pins
Solder cup pins
Applicable wires
—
AWG26 max.
Model
XS3M-K421-1
XS3M-K421-2
UL
—
Connections
Model
XS3M
Mating Connectors
XS3F (M8/S8), XS3W (M8/S8)
Note 1. The plug can be connected to both M8 screw and S8 snap-in models..
2. Only plugs and sockets with the same poles can be connected to each other.
Dimensions
(Unit: mm)
Embedded Plug with Screw Threads
DIP Pins
XS3M-K421-1
M8 × 1.0
1 dia.
Four, 1 dia.
4
2
2
3.6
Solder Cup Pins
XS3M-K421-2
Four, 1 dia.
3
+0.05
dia.
0
0.5 1.95
2
Resin
filled
3.4
3 3
6.75
7.2 (min)
10.3
M8 × 1.0
1 dia.
2.15
0.4
2
2
6.5 dia. 5.8±0.2 dia.
3
5.8
1
1
5.6 dia.
4
4
5.8 dia. 6.5 dia. 6.9 dia.
6.5 dia. 5.8±0.2 dia.
3
Mounting Dimensions
2.15 Four, 1 dia.
0.4
Mounting Dimensions
Four, 1 dia.
4
5.8 dia. 6.5 dia. 6.9 dia.
1
5.8
1
5.6 dia.
Solder cup hole
0.7 dia. × 1.7
1.7
3
2
3 3
6.75
3.4
+0.05
dia.
0
0.5 1.95
Resin
filled
5.2 (min)
10.3
21
XS3
XS3M Panel-mounting Plugs
Ordering Information
Mounting
method
Connector
Poles
Pin shape
Shield pin
5
DIP pins 4.5 mm
(for either round holes or solder cups)
No
Front Lock
Applicable wires
UL
XS3M-M524-10
AWG26 max.
Yes
Model
---
XS3M-M524-11
Connections
Model
Mating Connectors
XS3M-M524-1@
XS3F-M52@-5@@-A
Note: Only plugs and sockets with the same poles can be connected to each other.
Dimensions
(Unit: mm)
Front lock (5 pins)
DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), Without Shield Pin
XS3M-M524-10
Panel Cutout
+0.1
0
PCB-mounting Dimensions
3.4
+0.1
0
8.2 mm dia.
7.1
Five, 1.7 dia. lands
1.95
Five, 1.2 dia.
O-ring on panel side*
2-1.45
2
1.35
1
3.4
M8 × 1.0
1.35
3.4
12
1.95
11.9 dia.
1.45
1.45
5-1 dia.
0.35
*The O-ring on the panel side maintains a
waterproof structure (IP67) between the
panel and Connector.
1.35 0.35
SW7
6 min.
SW10
7.05
Pin Numbers
Note: The panel thickness is
2.4 mm maximum.
O-ring on panel side*
1.95
3
5
2-0.35
Note: The panel thickness
is 0.8 to 2 mm.
4
SW11
5-4.5
(2.5)
Panel location (example for t = 2.0)
DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), With Shield Pin
XS3M-M524-11
Panel Cutout
PCB-mounting Dimensions
10.4
3.4
1.95
+0.1
0
+0.1
0
8.2 mm dia.
Two, 1.2 lands
2-0.7
4-R0.6
4-R0.35
Five, 1.7 dia. lands
7.1
Five, 1.2 dia.
2-1.45
2
4
Two, 3.8
lands
1
1.35
O-ring on panel side*
Two, 3.3
lands
2-0.35
Note: The panel thickness is 2.4 mm maximum.
Note: The panel thickness is 0.8 to 2 mm.
3.4
1.95
M8 × 1.0
1.95
11.9 dia.
5-1 dia.
1.45
2-2.6
1.35
0.35
1.35 0.35
SW7
SW10
6 min.
7.05
Pin Numbers
10.4
3.4
O-ring on panel side*
5-4.5
12
1.45
3
5
2-4.5
SW11
*The O-ring on the panel side maintains a
waterproof structure (IP67) between the
panel and Connector.
(2.5)
Panel location (example for t = 2.0)
22
XS3
Safety Precautions
Refer to Safety Precautions on page 26.
Precautions for Correct Use
XS3M-M524-@@ Connection
To mate the Connectors, align the mating marks on the Plug
and Socket (see following figure), insert the Connectors
completely, and tighten the lock nut, being careful not to
damage the threads.
XS3M-M524-@@ Panel Mounting
After you mount the Connector to the panel, attach the nut and
tighten it to a suitable torque (0.4 N·m).
Plug
Mating marks
Socket
23
XS3
XS3R Y-Joint Plug/Socket Connectors
Ordering Information
Connections
For M8 Connectors
Cable
Connector
Connectors on
both cable ends
With cable
Connector on
one cable end
Cable length L (m)
0.5
1
2
3
2
5
Model
XS3R-M426-1C51-A
XS3R-M426-1011-A
XS3R-M426-1021-A
XS3R-M426-1031-A
XS3R-M426-1020-A
XS3R-M426-1050-A
UL
Model
---
XS3R
(M8)
Robot cable
Connector on
one cable end
5
XS3R-M426-1050-R
Oil-resistant
polyurethane
robot cable
Connector on
one cable end
5
XS3R-M426-4050-PR *
---
Without cable
Connectors on
both cable ends
---
XS3R-M426-1
XS3R-M426-5
---
Mating
Connectors
XS3F (M8)
XS3H (M8)
XS3W (M8)
XS3P (M8)
UL2238 certified
(File no. E207683)
*XS3R-M426-4@@0-PR is dedicated to wiring of 2-wire sensors.
Dimensions
(Unit: mm)
M8 Screw-on Connectors
Connectors on Both Cable Ends (Y-Joint Plug/Socket)
XS3R-M426-1@@1-A With cable
16.4
Socket
4
3
1 12.5
4
3
CN2
2
3
1
9 dia.
10 dia.
23
9 dia.
4
2
Plug
4 dia.
5.6 dia.
CN2
.
1
M8 × 1.0
dia
10.5
3.5
2
Wiring Diagram
CN1
1
4
2
CN1
M8 × 1.0
Connector on One Cable End (Y-Joint Plug/Socket)
XS3R-M426-1@@0-A With cable
XS3R-M426-1@@0-R Robot cable
CN2
.
dia
CN2
4 dia.
9 dia.
4
5.6 dia.
3
1 12.5
4
2
1
23
9 dia.
4
3
CN1
CN1
30
5
4
1
3.5 dia.
23
3
1
4
3
CN2
4.7 dia.
CN2
4
2
8 dia.
CN1
50
3
1
2
3
4
Black
Blue
White
Brown
Plug
1
2
CN2
1
2
3
4
10 dia. CN0
CN1
1
2
3
4
Lead
color
XS3R-M426-5
.
XS3R-M426-1
dia
3.5
4
1
23
16.4
3
1 12.5
9 dia.
4
Lead
color
Wiring Diagram
2
CN2
CN1
5
30
L
Socket
9 dia.
4
2
1
2
3
4
12.5
Connector on Both Ends (Y-Joint Plug/Socket) without Cable
XS3R-M426-@
1
10.5
2
M8 × 1.0
Black
Blue
White
Brown
Wiring Diagram
34.9
10.5
1
2
3
4
50
L
Connector on One Cable End (Y-Joint Plug/Socket)
XS3R-M426-4@@0-PR Oil-resistant polyurethane robot cable
2
CN0
Wiring Diagram
16.4
Socket
3.5
1
M8 × 1.0
1
2
3
4
2
10.5
2
4
3
2
1
CN0
32
L
1
2
3
4
3
37.2
M8 × 1.0
4
CN1
1
2
3
4
CN2
4
3
2
1
1
2
3
4
CN0
CN1
1
2
3
4
4
3
2
1
CN0
24
XS3
Common Accessories and Tools (Order Separately)
Ordering Information
Dust Covers
XS3Z-13
XS3Z-13
M8 Plug
XS3Z-15
XS3Z-15
M8 Socket
S8 Socket
S8 Plug
Model
XS3Z-13
XS3Z-15
Material
PVC resin/red
The Dust Cover is for dust prevention and does not
ensure IP67 degree of protection.
When mounting the Dust Cover to a Connector, be
sure to press the Dust Cover onto the Connector until
the Connector is fully inserted into the Dust Cover.
Suitable connector
Model
Mounting portion
XS3H/XS3W/XS3R
M8 plug
XS3F/XS3W
S8 socket
XS3H/XS3W
S8 plug
XS3M
M8/S8 plug
XS3F/XS3W/XS3R
M8 socket
25
XS3
Safety Precautions
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed product ratings.
Connections
• The XS3 and XS2 Sensor I/O Connectors cannot be
connected to each other.
• You cannot mate Connectors that have a different number
of poles.
• When using Sensors with Connectors or Limit Switches,
use the Sensor I/O Connectors specified in the catalog.
• Do not connect M8 screw-on models and S8 snap-in
models together, otherwise the proper degree of protection
of the Connectors will not be maintained.
Connector Connection and Disconnection
• Before connecting or disconnecting Connectors, make sure
that no power is being supplied to the Connectors.
• When connecting or disconnecting Connectors, be sure to
hold the Connectors by hand. Do not disconnect the
Connectors by pulling the cable.
• Do not touch the mating surface of the connectors with wet
hands. If there is any water on the Connector or near the
Connector, be sure to wipe off the water before connecting
or disconnecting the Connector, otherwise the Connector
may short-circuit internally or not ensure good insulation.
• Make sure that mating section of any Connector is free of
metal dust or power.
• Do not use pliers to tighten mounting the thread bracket,
otherwise the thread bracket may be damaged. Be sure to
tighten each thread bracket by hand within a torque of
0.2 N·m. If the thread bracket is not tightened securely, the
Connector may not maintain its proper degree of protection
or the thread bracket may fall off due to vibration.
• When you tighten or loosen a thread bracket, hold onto only
the thread bracket.
If you hold onto the cover or cable, excessive rotational
force will be applied to the Connector and may damage it.
• Fully insert S8 snap-in models until the Connectors are
hidden by the metal casing of the opposite parts,
otherwise the Connectors will not maintain their proper
degree of protection or the thread brackets may become
loose due to vibration.
Degree of Protection
• Do not impose external force continuously on the joints of
pin blocks and covers, otherwise the Connectors may not
keep its proper degree of protection (i.e., IP67).
• Connectors are not fully watertight. Do not use them
underwater.
• The Connectors are not oil-resistant. Do not use them
where they would be subject to oil.
• If Connectors are used in places with vibration or shock,
secure the mating section of each Connector, otherwise the
Connectors may be disconnected or fail to maintain their
proper degree of protection.
• Connectors are of resin mold construction. Do not impose
excessive force on them.
Storage
Do not store Connectors for long periods of time in the
following locations
• Locations subject to dust or high humidity
• Locations subject to ammonia gas or sulfide gas
Setup
• Do not make any cable bends near the base of the Unit.
• Any bends made must have a minimum radius of 36 mm.
26
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is
not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,
or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with
respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Kyoto, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, 2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200 Hoffman Estates,
IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON ADEPT TECHNOLOGIES, INC.
4550 Norris Canyon Road, Suite 150, San Ramon, CA 94583 U.S.A.
Tel: (1) 925-245-3400/Fax: (1) 925-960-0590
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2020-2022 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_7_14
Printed in Japan
Cat. No. G147-E1-03
0222 (0820)
工商网监
湘ICP备2023018690号
