XS3F-M8PVC3S15M

Round Water-resistant Connectors (M8/S8) XS3 Small Round Water-resistive Connectors • Water-resistive, compact connector meets IP67 requirements. • Conventional M8 screw-on models are available along with S8 snap-in models that connect and disconnect with one touch. • XS3-R Series; connectors with cables are available. M8 models are UL certified. • Oil-resistant Polyurethane Robot Cables added. • M8-M12 conversion cables are also available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions on page 26. Model Number Legend Connectors with Cables Model Number Legend Connector Cable specifications Robot cable Connectors on both cable ends Oil-resistant polyurethane robot cable Standard cable Connector on one cable end (Socket) Robot cable Oil-resistant polyurethane robot cable PUR (low-temperature use) cable Connector on one cable end (Plug) Robot cable Oil-resistant polyurethane robot cable XS3: M8 screw connection Cable length (m) 1 2 5 10 1 2 5 10 2 5 10 1 2 5 10 2 5 10 2 5 0.3 1 2 5 Model XS3W-M421-401-R XS3W-M421-402-R XS3W-M421-405-R XS3W-M421-410-R XS3W-M421-401-PR XS3W-M421-402-PR XS3W-M421-405-PR XS3W-M421-410-PR XS3F-M421-402-A XS3F-M421-405-A XS3F-M421-410-A XS3F-M421-401-R XS3F-M421-402-R XS3F-M421-405-R XS3F-M421-410-R XS3F-M421-402-PR XS3F-M421-405-PR XS3F-M421-410-PR XS3F-M421-402-L XS3F-M421-405-L XS3H-M421-4C3-R XS3H-M421-401-R XS3H-M421-402-PR XS3H-M421-405-PR Reference page 3 10 16 Note: Only DC, straight, and 4-core types are shown in this table. Refer to the relevant pages for other products. 1 XS3 Ratings and Specifications Item Model XS3F-M52@-5@@-A XS3F/H/W/P/M Rated current 1 ADC 3 ADC Rated voltage 125 VDC *2 30 VDC XS3M-M524-1@ XS3R 1 ADC 125 VDC Contact resistance (connector) 40 mΩ max. (20 mV max., 100mA max.) Insulation resistance 1,000 MΩ min. (at 500 VDC) Dielectric strength (connector) 1,000 VAC for 1 min (leakage current: 1 mA max.) Degree of protection IP67 (IEC60529) Insertion tolerance 200 times Cable tensile strength *1 49 N/15 s Ambient operating temperature range −25 to 70°C *3 Ambient humidity range 20 to 85%RH 60 mΩ max. (20 mV max., 100 mA max.) 650 VAC for 1 min (leakage current: 1 mA max.) 1,000 VAC for 1 min (leakage current: 1 mA max.) −25 to 85°C −25 to 70°C *1. Models with cable only *2. Except 5 poles *3. Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it. Materials and Finish Connector Type Item M8 Model XS3F/H/W/R S8 XS3F/W (Socket side) XS3M-M524-1@ XS3P/M *1 Contacts Phosphor bronze/ Brass/nickel base, nickel base, gold gold plating plating Fixture Brass/nickel plating or SUS316L Contact block PBT resin (UL94 V-0) O-ring Rubber Cover Soft PBT resin *2 XS3H/W (Plug side) XS3P Phosphor bronze/ Brass/nickel base, nickel base, gold gold plating plating — — Brass/nickel plating — TPEE — *1. Except 5 poles *2. Except XS3R-M426-4050-PR. Material of the cover of XS3R-M426-4050-PR: PBT resin Note: The XS3M is for both M8 and S8. Cables Item Poles 3 poles 4 poles Standard cable 4 mm dia, AWG24 (0.2 mm2) Robot Cable 4 mm dia, AWG24 Oil-resistant polyurethane robot cable 5 poles 4.7 mm dia, AWG24 (0.2 mm2) — 4.7 mm dia, AWG23 (0.3 mm2) — — Note: Only the XS3F (socket) is available with 5 poles. Pin Arrangement (Engaged Side) Item Poles Male (plug) contacts 3 poles 4 1 3 4 poles 2 4 1 3 5 poles 2 4 1 3 5 DC Female (socket) contacts 4 3 1 4 2 3 1 4 2 3 1 5 2 XS3 XS3W Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug) Model Number Structure Model Number Legend Use this model number legend to identify products from their model number. Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-@@2@-@@@-@ 1 2 3 4 1. Fastening Method M: M8 S: S8 5 6 3. Cable Connection Direction 1: Straight (socket)/ Straight (plug) 2: Right-angle (socket)/ Right-angle (plug) 2. Connector 3: Straight (socket)/ Poles Right-angle (plug) 3: 3 poles 4: Right-angle (socket)/ 4: 4 poles Straight (plug) 4. Connections (Numbers inside circles are terminal numbers) 3: ➀ Brown, ➁ Blue, ➂ Black 4: ➀ Brown, ➁ White, ➂ Blue, ➃ Black 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 10: 10 m 6. Cable Specifications R : Robot cable PR : Oil-resistant polyurethane robot cable Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores 3 Cable connection direction Straight (Socket)/Straight (Plug) Straight (Socket)/Straight (Plug) Robot cable 4 Right-angle (Socket)/Right-angle (plug) Straight (Socket)/Right-angled (Plug) Right-angle (Socket)/Straight (Plug) Straight (Socket)/Straight (plug) Oil-resistant polyurethane robot cable Right-angle (Socket)/Right-angle (Plug) 4 Straight (Socket)/Right-angled (Plug) Right-angle (socket)/Straight (Plug) Cable length L (m) Model 1 XS3W-M321-301-R 2 XS3W-M321-302-R 5 XS3W-M321-305-R 10 XS3W-M321-310-R 1 XS3W-M421-401-R 2 XS3W-M421-402-R 5 XS3W-M421-405-R 10 XS3W-M421-410-R 2 XS3W-M422-402-R 5 XS3W-M422-405-R 2 XS3W-M423-402-R 5 XS3W-M423-405-R 2 XS3W-M424-402-R 5 XS3W-M424-405-R 1 XS3W-M421-401-PR 2 XS3W-M421-402-PR 5 XS3W-M421-405-PR 10 XS3W-M421-410-PR 1 XS3W-M422-401-PR 2 XS3W-M422-402-PR 5 XS3W-M422-405-PR 1 XS3W-M423-401-PR 2 XS3W-M423-402-PR 5 XS3W-M423-405-PR 1 XS3W-M424-401-PR 2 XS3W-M424-402-PR 5 XS3W-M424-405-PR UL UL2238 certified (File no. E207683) --- 3 XS3 S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight (Socket)/Straight (Plug) Robot cable 4 Right-angle (Socket)/Right-angle (Plug) Straight (Socket)/Right-angled (Plug) Right-angle (Socket)/Straight (Plug) Cable length L (m) Model 1 XS3W-S421-401-R 2 XS3W-S421-402-R 5 XS3W-S421-405-R 2 XS3W-S422-402-R 5 XS3W-S422-405-R 2 XS3W-S423-402-R 5 XS3W-S423-405-R 2 XS3W-S424-402-R 5 XS3W-S424-405-R UL --- Note: Ask your OMRON representative about other cable lengths. Ratings and Specifications Pin Arrangement (Engaged Side) Item No. of poles 3 poles 4 Male (plug) contacts 1 Female (socket) contacts 3 3 4 poles 2 4 1 3 4 2 3 1 DC type 4 1 Connections Model Socket side XS3W (M8) XS3M (M8/S8) XS3H (M8) XS3W (S8) XS3M (M8/S8) XS3H (S8) Plug side XS3F (M8) XS3W (M8) XS3P (M8) XS3F (S8) XS3W (S8) XS3P (S8) Note 1. Cables can be extended with more than one XS3W. 2. M8 screw models and S8 snap-in models cannot be connected to each other. 3. Only plugs and sockets with the same poles can be connected to each other. 4 XS3 Dimensions (Unit: mm) M8 Screw-on Connectors with Robot Cable Straight (Socket)/Straight (Plug) XS3W-M321-3@@-R (3 poles) M8 × 1.0 Socket 4 3 4 dia. M8 × 1.0 Plug 4 10 dia. 9 dia. 1 3 1 32 31.4 L XS3W-M421-4@@-R (4 poles) M8 × 1.0 M8 × 1.0 4 4 dia. Socket 2 9 dia. 3 Four, 1 dia. Plug 2 4 1 3 10 dia. 1 32 31.4 L Straight (Socket)/Right-angle (Plug) XS3W-M423-4@@-R (4 poles) L M8 × 1.0 18.9 31.4 4 2 3 1 9 dia. 21.1 Socket 4 dia. Plug M8 × 1.0 10 dia. Right-angle (Socket)/Right-angle (Plug) XS3W-M422-4@@-R (4 poles) 1 2 3 4 Four, 1 dia. L 18.9 20.5 Socket 18.9 4 dia. M8 × 1.0 9 dia. 2 21.1 Plug 10 dia. 1 4 1 2 3 4 3 M8 × 1.0 Right-angle (Socket)/Straight (Plug) XS3W-M424-4@@-R (4 poles) Four, 1 dia. L 18.9 Four, 1 dia. 32 2 4 1 3 10 dia. 20.5 Socket 4 dia. Plug M8 × 1.0 9 dia. 2 1 4 3 M8 × 1.0 5 XS3 M8 Screw-on Connectors with Oil-resistant Polyurethane Robot Cable Straight (Socket)/Straight (Pug) XS3W-M421-4@@-PR (4 poles) Four, 1 dia. 2.15 2 M8 × 1 Plug Molded part (black) 4.7 dia. 2.15 M8 × 1.0 Socket 4 4 10 dia. 1.95 0.5 1 2 9 dia. 3 3 1.95 0.5 32 3.4 3.4 L Straight (Socket)/Right-angle (Plug) XS3W-M423-4@@-PR (4 poles) 1 31.4 Plug Molded part (black) 10 dia. M8 × 1 Socket 2.15 M8 × 1.0 4.7 dia. 4 2 9 dia. 1.95 0.5 21.1 3 1 21.5 3.4 31.4 24.9 L Four, 1 dia. 4 3 2 1 3.4 2.15 0.5 1.95 Right-angle (Socket)/Right-angle (Plug) XS3W-M422-4@@-PR (4 poles) Molded part (black) Plug 10 dia. Socket 4.7 dia. 9 dia. 20.5 21.1 M8 × 1 24.9 24.9 L Four, 1 dia. 4 3 2 1 1.95 0.5 3 3.4 2.15 4 2.15 3.4 2 1 0.5 1.95 Four, 1 dia. Right-angle (Socket)/Straight (Plug) XS3W-M424-4@@-PR (4 poles) Molded part (black) Four, 1 dia. 2.15 M8 × 1 2 4 1 3 Plug 4.7 dia. Socket 9 dia. 10 dia. 1.95 0.5 20.5 21.5 3.4 32 24.9 L 1.95 0.5 3 4 2.15 3.4 1 2 Four, 1 dia. Wiring Diagram 3 Cores 4 Cores Cable lead colors Pin No. 1 1 Brown 3 4 3 4 Blue Black Socket Plug Cable lead colors Pin No. 1 2 3 4 1 2 3 4 Socket Brown White Blue Black Plug 6 XS3 S8 Snap-in Connectors with Robot Cable Straight (Socket)/Straight (Plug) XS3W-S421-4@@-R (4 poles) Socket 4 2 3 1 Plug 4 dia. Four, 1 dia. 2 4 1 3 8.2 dia. 8.2 dia. 30.7 30.7 L Right-angle (Socket)/Right-angle (Plug) XS3W-S422-4@@-R (4 poles) L 18.9 19.8 18.9 Socket 19.8 Plug 4 dia. 8.2 dia. 8.2 dia. 1 2 Four, 1 dia. 1 2 3 4 4 3 M8 × 1.0 Straight (Socket)/Right-angle (Plug) XS3W-S423-4@@-R (4 poles) L 18.9 30.7 4 2 3 1 8.2 dia. Socket 4 dia. 19.8 Plug 8.2 dia. Four, 1 dia. Right-angle (Socket)/Straight (Plug) XS3W-S424-4@@-R (4 poles) 1 2 3 4 L Four, 1 dia. 30.7 18.9 2 4 1 3 8.2 dia. 19.8 Socket 4 dia. Plug 8.2 dia. 2 1 4 3 M8 × 1.0 Wiring Diagram 4 Cores Cable lead colors Pin No. 1 2 3 4 1 2 3 4 Socket Brown White Blue Black Plug 7 XS3 with Cables, Connectors on Both Cable Ends XS3W Connectors (M8 Socket/M12 Plug or M8 Plug/M12 Socket) Model Number Structure Model Number Legend Use this model number legend to identify products from their model number. Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-M@2@-@C2-A 1 2 1. Fastening Method M: M8 2. Connector Poles 3: 3 poles 4: 4 poles 3 4 5 6 3. Cable Connection Direction C: M8 screw-on, straight (socket) /M12 Smartclick, straight (plug) D: M12 Smartclick, straight (socket) /M8 screw-on, straight (plug) 5. Cable Length C2: 20 cm 6. Cable Specifications A: Standard cable 4. Connections (Numbers inside circles are terminal numbers) 3: ➀ Brown, ➁ Blue, ➂ Black 4: ➀ Brown, ➁ White, ➂ Blue, ➃ Black Ordering Information Cable specifications No. of cable cores 3 Standard cable 4 Cable connection direction Cable length L (m) M8 screw-on, straight (Socket)/ M12 Smartclick, straight (Plug) M12 Smartclick, straight (Socket)/ M8 screw-on, straight (Plug) M8 screw-on, straight (Socket)/ M12 Smartclick, straight (Plug) M12 Smartclick, straight (Socket)/ M8 screw-on, straight (Plug) Model UL XS3W-M32C-3C2-A XS3W-M32D-3C2-A 0.2 --XS3W-M42C-4C2-A XS3W-M42D-4C2-A 8 XS3 Dimensions (Unit: mm) M8 Screw-on Connectors, Straight (Socket)/M12 Smartclick Connectors, Straight (Plug) XS3W-M32C-3C2-A (3 poles) XS3W-M42C-4C2-A (4 poles) 200 44.7 2 31.4 (3 cores) 1 14.9 dia. 3 9 dia. 4 3 4 4 dia. Plug 1 M8 × 1.0 Socket M12 × 1.0 (4 cores) 1 3 2 4 M8 × 1.0 M12 Smartclick Connectors, Straight (Socket)/M8 screw-on Connectors, Straight (Plug) XS3W-M32D-3C2-A (3 poles) XS3W-M42D-4C2-A (4 poles) 200 40.7 1 32 (3 cores) 2 14.9 dia. 4 3 M12 × 1.0 10 dia. 1 4 4 dia. Socket 3 Plug M8 × 1.0 (4 cores) 3 1 4 2 M8 × 1.0 Note: For 3-core, M12 connectors, pin 2 is not connected internally. Wiring Diagram 3 Cores 4 Cores Cable lead colors Pin No. 1 1 Brown 3 4 3 4 Blue Black Pin No. 1 2 3 4 Cable lead colors 1 2 3 4 Brown White Blue Black For the M12 connectors, one-touch (Smartclick) connectors that are compatible with previous screw-on M12 connectors are used. Refer to your OMRON website for details. XS5 Series Clic k! Insert fully. Rotate 1/8 turn. One-touch Connection 9 XS3 XS3F Connectors with Cables, Sockets on One Cable End Model Number Structure Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3F-@@2@-@@@-@ 1 2 1. Fastening Method M: M8 S: S8 E: M8 SUS316L Lock 2. Connector Poles 3: 3 poles 4: 4 poles 5: 5 poles 3 4 5 6 3. Cable Connection Direction 1: Straight 2: Right-angle 4. Connections (Numbers inside circles are terminal numbers) 3: ➀ Brown, ➁ Blue, ➂ Black 4: ➀ Brown, ➁ White, ➂ Blue, ➃ Black 5: ➀ Brown, ➁ White, ➂ Blue, ➃ Black, ➄ Gray 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 10: 10 m 6. Cable Specifications A: Standard cable L: PUR cable (low-temperature use) R: Robot cable PR: Oil-resistant polyurethane robot cable 10 XS3 Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores Cable connection direction Straight Standard cable Right-angle 3 Straight Robot cable Right-angle Straight Standard cable Right-angle Straight Standard SUS316L cable lock Right-angle Straight Robot cable 4 Right-angle Straight Oil-resistant polyurethane robot cable Right-angle Straight PUR cable (low-temperature use) Right-angle Straight Standard cable 5 Right-angle Cable length L (m) 2 5 2 5 1 2 5 10 2 5 10 2 5 10 2 5 10 2 5 2 5 1 2 5 10 1 2 5 10 2 5 10 1 2 5 10 2 5 2 5 2 5 10 2 5 10 Model XS3F-M321-302-A XS3F-M321-305-A XS3F-M322-302-A XS3F-M322-305-A XS3F-M321-301-R XS3F-M321-302-R XS3F-M321-305-R XS3F-M321-310-R XS3F-M322-302-R XS3F-M322-305-R XS3F-M322-310-R XS3F-M421-402-A XS3F-M421-405-A XS3F-M421-410-A XS3F-M422-402-A XS3F-M422-405-A XS3F-M422-410-A XS3F-E421-402-A XS3F-E421-405-A XS3F-E422-402-A XS3F-E422-405-A XS3F-M421-401-R XS3F-M421-402-R XS3F-M421-405-R XS3F-M421-410-R XS3F-M422-401-R XS3F-M422-402-R XS3F-M422-405-R XS3F-M422-410-R XS3F-M421-402-PR XS3F-M421-405-PR XS3F-M421-410-PR XS3F-M422-401-PR XS3F-M422-402-PR XS3F-M422-405-PR XS3F-M422-410-PR XS3F-M421-402-L XS3F-M421-405-L XS3F-M422-402-L XS3F-M422-405-L XS3F-M521-502-A XS3F-M521-505-A XS3F-M521-510-A XS3F-M522-502-A XS3F-M522-505-A XS3F-M522-510-A UL --- UL2238 certified (File no. E207683) --- UL2238 certified (File no. E207683) --- S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight Robot cable 4 Right-angle Cable length L (m) 1 2 5 1 2 5 Model XS3F-S421-401-R XS3F-S421-402-R XS3F-S421-405-R XS3F-S422-401-R XS3F-S422-402-R XS3F-S422-405-R UL --- Note: Ask your OMRON representative about other cable lengths. 11 XS3 Connections Model Mating Connectors XS3F (M8) XS3M (M8/S8), XS3H (M8), XS3W (M8) XS3F (S8) XS3M (M8/S8), XS3H (S8), XS3W (S8) Note 1. M8 screw models and S8 snap-in models cannot be connected to each other. 2. Only plugs and sockets with the same poles can be connected to each other. Dimensions (Unit: mm) M8 Screw-on Connectors (3 poles) Straight XS3F-M321-3@@-A Standard cable XS3F-M321-3@@-R Robot cable M8 × 1.0 4 dia. 4 3 1 9 dia. 30 5 50 31.4 L Right-angle XS3F-M322-3@@-A Standard cable XS3F-M322-3@@-R Robot cable 50 L 18.9 4 dia. 30 5 20.5 9 dia. 1 4 3 M8 × 1.0 Wiring Diagram 3 Cores Pin No. Cable lead colors 1 Brown 3 4 Blue Black 12 XS3 M8 Screw-on Connectors (4 poles) Straight XS3F-M421-4@@-A Standard cable XS3F-M421-4@@-R Robot cable M8 × 1.0 4 2 3 1 4 dia. 9 dia. 30 5 50 31.4 L Right-angle XS3F-M422-4@@-A Standard cable XS3F-M422-4@@-R Robot cable 50 L 18.9 30 20.5 5 4 dia. 9 dia. 1 2 4 3 M8 × 1.0 M8 SUS316L Lock (4 poles) Straight XS3F-E421-402-A Standard cable XS3F-E421-405-A Standard cable 2.15 M8 × 1.0 12.9 4 2 3 1 4 dia. 9 dia. 1.95 0.5 21.5 3.4 30 5 50 31.4 L Right-angle XS3F-E422-402-A Standard cable XS3F-E422-405-A Standard cable 50 L 23.1 20.5 30 5 4 dia. 9 dia. 2 1 3.4 4 2.15 M8 × 1.0 3 0.5 1.95 Wiring Diagram 4 Cores Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black 13 XS3 M8 Screw-on Connectors (4 poles) Straight Oil-resistant polyurethane robot cable XS3F-M421-4@@-PR PUR cable XS3F-M421-4@@-L L 31.4 4.7 dia. 4 2 3 1 9 dia. M8 × 1 5 50 Right-angle Oil-resistant polyurethane robot cable XS3F-M422-4@@-PR PUR cable XS3F-M422-4@@-L L 24.9 4.7 dia. 20.5 5 Molded part (black) 50 9 dia. M8 × 1 2 1 3.4 2.15 3 4 0.5 1.95 M8 Screw-on Connectors (5 poles) Straight XS3F-M521-5@@-A Standard cable 1.95 M8 × 1.0 4.7 dia. 2 1.45 4 1.35 1 3 5 9 dia. 0.35 21.5 3.4 30 Right-angle XS3F-M522-5@@-A Standard cable 5 50 L 31.4 L 4.7 dia. 24.9 20.5 5 30 50 9 dia. M8 × 1.0 0.35 2 1 5 3.4 1.95 4 3 1.35 1.45 Wiring Diagram 5 Cores 4 Cores Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black Pin No. 2 4 1 3 5 Cable lead colors Brown White Blue Black Gray 14 XS3 S8 Snap-in Connectors (4 poles) Straight XS3F-S421-4@@-R Robot cable 4 dia. 4 2 3 1 8.2 dia. 30 5 50 30.7 L Right-angle XS3F-S422-4@@-R Robot cable 50 L 18.9 30 5 19.8 4 dia. 8.2 dia. 2 1 4 3 Wiring Diagram 4 Cores Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black 15 XS3 XS3H Plugs on One Cable End Model Number Structure Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3H-@@2@-@@@-@ 1 2 3 1. Fastening Method 4 5 6 3. Cable Connection Direction M: M8 S: S8 1: Straight 2: Right-angle 2. Connector Poles 3: 3 poles 4: 4 poles 4. Connections (Numbers inside circles are terminal numbers) 3: ➀ Brown, ➁ Blue, ➂ Black 4: ➀ Brown, ➁ White, ➂ Blue, ➃ Black 5. Cable Length C3: 0.3 m 01: 1 m 02: 2 m 05: 5 m 6. Cable Specifications R: Robot cable PR: Oil-resistant polyurethane robot cable Ordering Information M8 Screw-on Connectors Cable specifications No. of cable cores Cable connection direction 3 Straight Straight Robot cable 4 Right-angle Straight Oil-resistant polyurethane robot cable 4 Right-angle Cable length L (m) Model 0.3 XS3H-M321-3C3-R 1 XS3H-M321-301-R 0.3 XS3H-M421-4C3-R 1 XS3H-M421-401-R 0.3 XS3H-M422-4C3-R 1 XS3H-M422-401-R 2 XS3H-M421-402-PR 5 XS3H-M421-405-PR 1 XS3H-M422-401-PR 2 XS3H-M422-402-PR 5 XS3H-M422-405-PR UL UL2238 certified (File no. E207683) --- Note: Ask your OMRON representative about other cable lengths. S8 Snap-in Connectors Cable specifications No. of cable cores Cable connection direction Straight Robot cable 4 Right-angle Cable length L (m) Model 0.3 XS3H-S421-4C3-R 1 XS3H-S421-401-R 0.3 XS3H-S422-4C3-R 1 XS3H-S422-401-R UL --- Connections Model Mating Connectors XS3H (M8) XS3F (M8), XS3W (M8), XS3P (M8) XS3H (S8) XS3F (S8), XS3W (S8), XS3P (S8) Note 1. M8 screw models and S8 snap-in models cannot be connected to each other. 2. Only plugs and sockets with the same poles can be connected to each other. 16 XS3 Dimensions (Unit: mm) M8 Screw-on Connectors (3 poles) Straight XS3H-M321-3@@-R Robot Cable M8 × 1.0 4 dia. 4 3 1 10 dia. 30 5 50 32 L M8 Screw-on Connectors (4 poles) Straight XS3H-M421-4@@-R Robot Cable Four, 1 dia. 4 dia. M8 × 1.0 2 4 1 3 10 dia. 30 5 50 32 L Right-angle XS3H-M422-4@@-R Robot Cable 50 L 18.9 20.1 30 5 4 dia. M8 × 1.0 10 dia. Four, 1 dia. 4 3 2 1 Wiring Diagram 4 Cores 3 Cores Pin No. Cable lead colors 1 Brown 3 4 Blue Black Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black 17 XS3 M8 Screw-on Connectors (4 poles) Straight XS3H-M421-4@@-PR Oil-resistant Polyurethane Robot Cable 2.15 M8 × 1.0 Four, 1 dia. 2 1.95 4 3 10 dia. 1 0.5 4.7 dia. 3.4 5 32 L 50 Right-angle XS3H-M422-4@@-PR Oil-resistant Polyurethane Robot Cable L 24.9 4.7 dia. 21.1 5 Molded part (black) 50 M8 × 1 10 dia. Four, 1 dia. 4 3 2 1 3.4 2.15 0.5 1.95 S8 Snap-in Connectors (4 poles) Straight XS3H-S421-4@@-R Robot Cable Four, 1 dia. 4 dia. 2 4 1 3 8.2 dia. 30 5 50 30.7 L Right-angle XS3H-S422-4@@-R Robot Cable 50 L 18.9 30 5 19.8 4 dia. 8.2 dia. Four, 1 dia. 4 3 2 1 Wiring Diagram 4 Cores Pin No. 1 2 3 4 Cable lead colors Brown White Blue Black 18 XS3 XS3P Panel-mounting Sockets for Terminal Boxes Ordering Information Connection method Connector Poles Panel mounting Pin shape Front lock or rear lock M8 screw-on 4 Rear lock S8 snap-in Front lock or rear lock Applicable wires Model UL — AWG24 max. AWG24 max. — AWG24 max. XS3P-M421-1 XS3P-M421-2 XS3P-M422-2 XS3P-S421-1 XS3P-S421-2 --- DIP pins Solder cup pins Solder cup pins DIP pins Solder cup pins Connections Model XS3P (M8) XS3P (S8) Mating Connectors XS3H (M8), XS3W (M8) XS3H (S8), XS3W (S8) Note 1. M8 screw models and S8 snap-in models cannot be connected to each other. 2. Only plugs and sockets with the same poles can be connected to each other. Dimensions (Unit: mm) M8 Screw-on Connectors XS3P-M421-1 (DIP Pins) Front lock or rear lock 1.8 Four, 1 dia. 1.95 XS3P-M421-2 (Solder Cup Pins) Front lock or rear lock 16 7.2 2.15 24.9 12.5 7.2 1.8 16 2.15 2.15 0.5 0.5 18 dia. 3.4 M12 × 1.0 2.5 9.4 M12 × 1.0 1.5 M12 × 1.0 nut 3.4 1.95 1.95 24.3 12.5 7.2 2.15 1.2 dia. 0.5 0.5 Solder cup hole 0.8 dia. × 2.5 18 dia. 3.4 M8 × 1.0 M12 × 1.0 9.4 9.7 Rubber bushing 7.2 M12 × 1.0 1.5 2.5 M12 × 1.0 nut 3.4 1.95 M8 × 1.0 9.7 Rubber bushing XS3P-M422-2 (Solder Cup Pins), Rear Lock Slim Models 10 13.2 2 7 (0.3) 2.15 6 1.95 11.5 dia. M8 × 1.0 M8 × 0.5 M8 × 0.5 nut 2 Rubber bushing 3.4 10 S8 Snap-in Connectors XS3P-S421-1 (DIP Pins) Front lock or rear lock Four, 1 dia. XS3P-S421-2 (Solder Cup Pins) Front lock or rear lock 1.8 16 7.2 2.15 1.95 24.9 12.5 7.2 1.8 16 2.15 0.5 0.5 18 dia. M12 × 1.0 2.5 3.4 9.4 M12 × 1.0 nut M12 × 1.0 1.5 Rubber bushing 1.95 1.95 9.5 2.15 24.3 12.5 7.2 2.15 1.2 dia. 0.5 Solder cap hole 0.8 dia. × 2.5 18 dia. 3.4 3.4 7.2 9.4 M12 × 1.0 2.5 M12 × 1.0 nut 0.5 M12 × 1.0 1.5 Rubber bushing 1.95 3.4 9.5 19 XS3 Mounting Dimensions for XS3P Screw-on Models and Snap-in Models Panel Cutout XS3P-@421-@ PCB-mounting Dimensions XS3P-M422-2 +0.2 0 9.8 24 min. Land 2.15 +0.2 8.2 0 +0.2 0 dia. 12 Panel-mounting Dimensions Rear lock Front Lock Panel Panel 0.5 1.95 Four, 1.2 dia. 24 min. 3.4 +0.2 0 7.2 Note: The panel thickness is 1 to 3 mm. Note: The panel thickness is 2.4 mm maximum. Nut Rubber bushing Rubber bushing Nut Safety Precautions Refer to Safety Precautions on page 26. Precautions for Correct Use Panel-Mounting • When mounting XS3P Panel-mounting Connectors to panels, refer to Panel-mounting Dimensions and provide rubber bushings and nuts for the Connectors. Apply a tightening torque of between 0.4 and 0.6 N·m to mount the Connectors. 20 XS3 XS3M Sensor-Embedded Plugs Ordering Information Mounting method Connector Poles Embedded model 4 Pin shape DIP pins Solder cup pins Applicable wires — AWG26 max. Model XS3M-K421-1 XS3M-K421-2 UL — Connections Model XS3M Mating Connectors XS3F (M8/S8), XS3W (M8/S8) Note 1. The plug can be connected to both M8 screw and S8 snap-in models.. 2. Only plugs and sockets with the same poles can be connected to each other. Dimensions (Unit: mm) Embedded Plug with Screw Threads DIP Pins XS3M-K421-1 M8 × 1.0 1 dia. Four, 1 dia. 4 2 2 3.6 Solder Cup Pins XS3M-K421-2 Four, 1 dia. 3 +0.05 dia. 0 0.5 1.95 2 Resin filled 3.4 3 3 6.75 7.2 (min) 10.3 M8 × 1.0 1 dia. 2.15 0.4 2 2 6.5 dia. 5.8±0.2 dia. 3 5.8 1 1 5.6 dia. 4 4 5.8 dia. 6.5 dia. 6.9 dia. 6.5 dia. 5.8±0.2 dia. 3 Mounting Dimensions 2.15 Four, 1 dia. 0.4 Mounting Dimensions Four, 1 dia. 4 5.8 dia. 6.5 dia. 6.9 dia. 1 5.8 1 5.6 dia. Solder cup hole 0.7 dia. × 1.7 1.7 3 2 3 3 6.75 3.4 +0.05 dia. 0 0.5 1.95 Resin filled 5.2 (min) 10.3 21 XS3 XS3M Panel-mounting Plugs Ordering Information Mounting method Connector Poles Pin shape Shield pin 5 DIP pins 4.5 mm (for either round holes or solder cups) No Front Lock Applicable wires UL XS3M-M524-10 AWG26 max. Yes Model --- XS3M-M524-11 Connections Model Mating Connectors XS3M-M524-1@ XS3F-M52@-5@@-A Note: Only plugs and sockets with the same poles can be connected to each other. Dimensions (Unit: mm) Front lock (5 pins) DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), Without Shield Pin XS3M-M524-10 Panel Cutout +0.1 0 PCB-mounting Dimensions 3.4 +0.1 0 8.2 mm dia. 7.1 Five, 1.7 dia. lands 1.95 Five, 1.2 dia. O-ring on panel side* 2-1.45 2 1.35 1 3.4 M8 × 1.0 1.35 3.4 12 1.95 11.9 dia. 1.45 1.45 5-1 dia. 0.35 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. 1.35 0.35 SW7 6 min. SW10 7.05 Pin Numbers Note: The panel thickness is 2.4 mm maximum. O-ring on panel side* 1.95 3 5 2-0.35 Note: The panel thickness is 0.8 to 2 mm. 4 SW11 5-4.5 (2.5) Panel location (example for t = 2.0) DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), With Shield Pin XS3M-M524-11 Panel Cutout PCB-mounting Dimensions 10.4 3.4 1.95 +0.1 0 +0.1 0 8.2 mm dia. Two, 1.2 lands 2-0.7 4-R0.6 4-R0.35 Five, 1.7 dia. lands 7.1 Five, 1.2 dia. 2-1.45 2 4 Two, 3.8 lands 1 1.35 O-ring on panel side* Two, 3.3 lands 2-0.35 Note: The panel thickness is 2.4 mm maximum. Note: The panel thickness is 0.8 to 2 mm. 3.4 1.95 M8 × 1.0 1.95 11.9 dia. 5-1 dia. 1.45 2-2.6 1.35 0.35 1.35 0.35 SW7 SW10 6 min. 7.05 Pin Numbers 10.4 3.4 O-ring on panel side* 5-4.5 12 1.45 3 5 2-4.5 SW11 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. (2.5) Panel location (example for t = 2.0) 22 XS3 Safety Precautions Refer to Safety Precautions on page 26. Precautions for Correct Use XS3M-M524-@@ Connection To mate the Connectors, align the mating marks on the Plug and Socket (see following figure), insert the Connectors completely, and tighten the lock nut, being careful not to damage the threads. XS3M-M524-@@ Panel Mounting After you mount the Connector to the panel, attach the nut and tighten it to a suitable torque (0.4 N·m). Plug Mating marks Socket 23 XS3 XS3R Y-Joint Plug/Socket Connectors Ordering Information Connections For M8 Connectors Cable Connector Connectors on both cable ends With cable Connector on one cable end Cable length L (m) 0.5 1 2 3 2 5 Model XS3R-M426-1C51-A XS3R-M426-1011-A XS3R-M426-1021-A XS3R-M426-1031-A XS3R-M426-1020-A XS3R-M426-1050-A UL Model --- XS3R (M8) Robot cable Connector on one cable end 5 XS3R-M426-1050-R Oil-resistant polyurethane robot cable Connector on one cable end 5 XS3R-M426-4050-PR * --- Without cable Connectors on both cable ends --- XS3R-M426-1 XS3R-M426-5 --- Mating Connectors XS3F (M8) XS3H (M8) XS3W (M8) XS3P (M8) UL2238 certified (File no. E207683) *XS3R-M426-4@@0-PR is dedicated to wiring of 2-wire sensors. Dimensions (Unit: mm) M8 Screw-on Connectors Connectors on Both Cable Ends (Y-Joint Plug/Socket) XS3R-M426-1@@1-A With cable 16.4 Socket 4 3 1 12.5 4 3 CN2 2 3 1 9 dia. 10 dia. 23 9 dia. 4 2 Plug 4 dia. 5.6 dia. CN2 . 1 M8 × 1.0 dia 10.5 3.5 2 Wiring Diagram CN1 1 4 2 CN1 M8 × 1.0 Connector on One Cable End (Y-Joint Plug/Socket) XS3R-M426-1@@0-A With cable XS3R-M426-1@@0-R Robot cable CN2 . dia CN2 4 dia. 9 dia. 4 5.6 dia. 3 1 12.5 4 2 1 23 9 dia. 4 3 CN1 CN1 30 5 4 1 3.5 dia. 23 3 1 4 3 CN2 4.7 dia. CN2 4 2 8 dia. CN1 50 3 1 2 3 4 Black Blue White Brown Plug 1 2 CN2 1 2 3 4 10 dia. CN0 CN1 1 2 3 4 Lead color XS3R-M426-5 . XS3R-M426-1 dia 3.5 4 1 23 16.4 3 1 12.5 9 dia. 4 Lead color Wiring Diagram 2 CN2 CN1 5 30 L Socket 9 dia. 4 2 1 2 3 4 12.5 Connector on Both Ends (Y-Joint Plug/Socket) without Cable XS3R-M426-@ 1 10.5 2 M8 × 1.0 Black Blue White Brown Wiring Diagram 34.9 10.5 1 2 3 4 50 L Connector on One Cable End (Y-Joint Plug/Socket) XS3R-M426-4@@0-PR Oil-resistant polyurethane robot cable 2 CN0 Wiring Diagram 16.4 Socket 3.5 1 M8 × 1.0 1 2 3 4 2 10.5 2 4 3 2 1 CN0 32 L 1 2 3 4 3 37.2 M8 × 1.0 4 CN1 1 2 3 4 CN2 4 3 2 1 1 2 3 4 CN0 CN1 1 2 3 4 4 3 2 1 CN0 24 XS3 Common Accessories and Tools (Order Separately) Ordering Information Dust Covers XS3Z-13 XS3Z-13 M8 Plug XS3Z-15 XS3Z-15 M8 Socket S8 Socket S8 Plug Model XS3Z-13 XS3Z-15 Material PVC resin/red The Dust Cover is for dust prevention and does not ensure IP67 degree of protection. When mounting the Dust Cover to a Connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover. Suitable connector Model Mounting portion XS3H/XS3W/XS3R M8 plug XS3F/XS3W S8 socket XS3H/XS3W S8 plug XS3M M8/S8 plug XS3F/XS3W/XS3R M8 socket 25 XS3 Safety Precautions Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Connections • The XS3 and XS2 Sensor I/O Connectors cannot be connected to each other. • You cannot mate Connectors that have a different number of poles. • When using Sensors with Connectors or Limit Switches, use the Sensor I/O Connectors specified in the catalog. • Do not connect M8 screw-on models and S8 snap-in models together, otherwise the proper degree of protection of the Connectors will not be maintained. Connector Connection and Disconnection • Before connecting or disconnecting Connectors, make sure that no power is being supplied to the Connectors. • When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. Do not disconnect the Connectors by pulling the cable. • Do not touch the mating surface of the connectors with wet hands. If there is any water on the Connector or near the Connector, be sure to wipe off the water before connecting or disconnecting the Connector, otherwise the Connector may short-circuit internally or not ensure good insulation. • Make sure that mating section of any Connector is free of metal dust or power. • Do not use pliers to tighten mounting the thread bracket, otherwise the thread bracket may be damaged. Be sure to tighten each thread bracket by hand within a torque of 0.2 N·m. If the thread bracket is not tightened securely, the Connector may not maintain its proper degree of protection or the thread bracket may fall off due to vibration. • When you tighten or loosen a thread bracket, hold onto only the thread bracket. If you hold onto the cover or cable, excessive rotational force will be applied to the Connector and may damage it. • Fully insert S8 snap-in models until the Connectors are hidden by the metal casing of the opposite parts, otherwise the Connectors will not maintain their proper degree of protection or the thread brackets may become loose due to vibration. Degree of Protection • Do not impose external force continuously on the joints of pin blocks and covers, otherwise the Connectors may not keep its proper degree of protection (i.e., IP67). • Connectors are not fully watertight. Do not use them underwater. • The Connectors are not oil-resistant. Do not use them where they would be subject to oil. • If Connectors are used in places with vibration or shock, secure the mating section of each Connector, otherwise the Connectors may be disconnected or fail to maintain their proper degree of protection. • Connectors are of resin mold construction. Do not impose excessive force on them. Storage Do not store Connectors for long periods of time in the following locations • Locations subject to dust or high humidity • Locations subject to ammonia gas or sulfide gas Setup • Do not make any cable bends near the base of the Unit. • Any bends made must have a minimum radius of 36 mm. 26 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. Note: Do not use this document to operate the Unit. OMRON Corporation Industrial Automation Company Authorized Distributor: Kyoto, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69, 2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC 2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON ADEPT TECHNOLOGIES, INC. 4550 Norris Canyon Road, Suite 150, San Ramon, CA 94583 U.S.A. Tel: (1) 925-245-3400/Fax: (1) 925-960-0590 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2020-2022 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. CSM_7_14 Printed in Japan Cat. No. G147-E1-03 0222 (0820)