Round Water-resistant Connectors (M12)
XS5
Water-resistant Smartclick Connectors
That Reduce Installation Work
• New - IDC Field-wiring versions of the XS5G and XS5C.
• A newly developed lock structure that maintains
compatibility with screw-type M12 connectors.
• Simply insert the Connectors, then turn them approximately
1/8 of a turn to lock.
• A positive click indicates locking.
• Features the same degree of protection (IP67) as
conventional, screw-type M12 connectors.
• Connector with cable are UL approved
TM
■ Specifications
Rated current
Rated voltage
Contact resistance
(connector)
Insulation resistance
Dielectric strength (connector)
Degree of protection
Insertion tolerance
Lock strength
Cable holding strength
Lock operating force
Ambient operating temperature range
Number of pressure-weld repairs (See note 1)
4A
250 VDC
40 mΩ max.
(20 mV max., 100 mA max.)
1,000 MΩ min. (at 500 VDC)
1,500 VAC for 1 min. (leakage current: 1 mA max.)
IP67 (IEC60529)
50 times min.
Tensile: 100 N/15 s, Torsion: 1 N·m/15 s
Tensile: 100 N/15 s, Torsion: 1 N·m/15 s (for cable diameter of 6 mm) (See note 2)
0.1 N·m to 0.25 N·m
−25°C to 70°C
10 times max. (Limited to the same external diameter and wire diameter.)
Note: 1. Only XS5C/G (IDC models)
2. Refer to product specifications for details.
■ Recommended Cables
Cable outer diameter (mm)
8 mm
7 mm
6 mm
4 mm
3 mm
7 to 8 mm
6 to 8 mm
5 to 6 mm
4 to 5 mm
3 to 4 mm
Crimping
models
—
Two types of connectors
are available:
0.18 to 0.3mm2
0.5 to 0.75mm2
Core sizes
Screw-on
models
Soldering
models
IDC Models
0.14 to 0.75 mm2
—
0.18 to 0.75mm2
2
0.5 mm max.
•
•
•
•
Minimum Wire Diameter: 0.08mm
Outer diameter of wire covering: 0.7 to 2.6 mm
Sheath material: PVC, PE, PUR
Material of wire covering: PVC, PE
■ Connection Combinations
OMRON model No.
Smartclick Plug Connectors
M12 Plug Connectors
XS5H, XS5G, XS5M
XS5W (plug side)
XS5R (plug side)
XS2H, XS2G, XS2M
XS2W (plug side)
XS2R (plug side)
Smartclick Socket
Connectors
XS5F, XS5C, XS5P
XS5W (socket side)
XS5R, (socket side)
M12 Socket Connectors
XS2F, XS2C, XS2P
XS2W (socket side)
XS2R (socket side)
Note:
TM
is a registered trademark of the OMRON Corporation.
: Connected by SmartclickTM twisting.
: Connected by screwing.
Round Water-resistant Connectors (M12)
XS5
123
■ Materials and Finish
Item
Model
XS5R
XS5M/P
XS5C/G
(Crimping, Soldering)
bronze Phosphor bronze
Phosphor bronze Phosphor
or Brass
Materials
Contacts
Finish
Brass
XS5C/G
(Screw-on)
Phosphor bronze or
Brass
XS5C/G
(IDC models)
Phosphor bronze
Nickel base, 0.15-μm
gold-plating
Nickel base, 0.4-μm gold-plating
Fixtures
Fixtures (Lock) (See note 3)
Pin Block
O-ring
Overmolding/Cover
Nickel-plated zinc alloy
SUS
PBT resin (UL94V-0)
Rubber
Fire-retardant, robot cable
Cable
XS5F/H/W
Oil-resistant
polyurethane cable
Soft PBT resin (UL94V-0)
UL AWM2464 CL3, 6-mm dia.,
4 cores × AWG20 (0.08/110)
—
PBT resin(UL94V-0)
—
6 dia.4 cores × 0.5 mm2 (0.12/45)
Seal Resin
—
Power supply wires
—
—
Epoxy Resin
(UL94V-0)
UL 1007 AWG20
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet
for information regarding assembly, tooling and accessories
that are common to the XS5 and XS2 connectors
—
—
2. See “XS2” datasheet for specifics regarding those connectors
3. Only plug
4-Pin Connectors with Cable Attached
■ XS5F - Socket on One Cable End
XS5F-D42@-@80-F Fire-retardant, Robot Cable
XS5F-D42@-@80-P Oil-resistant Polyurethane Cable
TM
Dimensions
(Unit: mm)
Straight
L (Cable length)
40.7
6 dia.
14.9 dia.
Wiring Diagram for 4 Cores
M12
30
5
Terminal No.
50
1
2
3
4
Angled
L (Cable length)
25.3
6 dia.
28.3
30
Cable
Color of core sheath
Brown
White
Blue
Black
5
50
Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5F-D42@-@80-P)is black, and the overmolding on the Fire-retardant, Robot Cable
(XS5F-D42@-@80-F) is warm gray.
Ordering Information
Cable type
Fire-retardant,
robot cable
Oil-resistant
polyurethane cable
Cable length L
(m)
1
2
3
5
10
2
5
10
Model
Straight
XS5F-D421-C80-F
XS5F-D421-D80-F
XS5F-D421-E80-F
XS5F-D421-G80-F
XS5F-D421-J80-F
XS5F-D421-D80-P
XS5F-D421-G80-P
XS5F-D421-J80-P
Note: 1. Ask your OMRON representative about other specifications.
124
Round Water-resistant Connectors (M12)
XS5
Angled
XS5F-D422-C80-F
XS5F-D422-D80-F
XS5F-D422-E80-F
XS5F-D422-G80-F
XS5F-D422-J80-F
XS5F-D422-D80-P
XS5F-D422-G80-P
XS5F-D422-J80-P
Standard pack
quantity
10
5
1
5
1
2. XS5F-D42@ models with -F are cRUus approved.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5F - D42@ - @80 - @
1
2 34 5
6 78
9
1. Type
F:
Connector connected to cable, socket on one cable end
2. AC/DC (Mating Section Form)
D:
DC
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating
5. Cable Connection Direction
1:
Straight
2:
Angled
6. Cable Length
A:
0.3 m
G: 5 m
B:
0.5 m
H: 7 m
C:
1m
J: 10 m
D:
2m
K: 15 m
E:
3m
L: 20 m
F:
4m
7. Connections
8:
A Brown, B White, C Blue, D Black
(Numbers inside circles are terminal numbers.)
8. Connectors on One End/Both Ends
0:
One end
9. Cable Specification
F:
Fire-retardant, robot cable
P:
Oil-resistant polyurethane cable
Round Water-resistant Connectors (M12)
XS5
125
■ XS5H - Plug on One Cable End
XS5H-D42@-@80-F Fire-retardant, Robot Cable
XS5H-D42@-@80-P Oil-resistant Polyurethane Cable
TM
Dimensions
(Unit: mm)
Straight
L (Cable length)
44.7
6 dia.
30
5
Wiring Diagram for 4 Cores
50
Angled
Terminal No.
1
2
3
4
L (Cable length)
25.3
6 dia.
32.3
30
Cable
Color of core sheath
Brown
White
Blue
Black
5
50
M12
Note: The overmolding on the Oil-resistant Polyurethane Cable (XS5H-D42@-@80-P) is black, and the overmolding of the Fire-retardant, Robot Cable
(XS5H-D42@-@81-F) is warm gray
Ordering Information
Cable type
Fire-retardant,
robot cable
Oil-resistant
polyurethane cable
Cable length L (m)
0.3
1
2
5
0.3
2
5
Model
Straight
XS5H-D421-A80-F
XS5H-D421-C80-F
XS5H-D421-D80-F
XS5H-D421-G80-F
XS5H-D421-A80-P
XS5H-D421-D80-P
XS5H-D421-G80-P
Note: 1. Ask your OMRON representative about other specifications.
2. XS5H-D42@ models with -F are cRUus approved.
126
Round Water-resistant Connectors (M12)
XS5
Angled
XS5H-D422-A80-F
XS5H-D422-C80-F
XS5H-D422-D80-F
XS5H-D422-G80-F
XS5H-D422-A80-P
XS5H-D422-D80-P
XS5H-D422-G80-P
Standard pack
quantity
10
5
10
5
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5H - D42@ - @80 - @
1
2 34 5
6 78
9
1. Type
H:
Connector connected to cable, plug on one cable end
2. AC/DC (Mating Section Form)
D:
DC
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating
5. Cable Connection Direction
1:
Straight
2:
Angled
6. Cable Length
A:
0.3 m
G: 5 m
B:
0.5 m
H: 7 m
C:
1m
J: 10 m
D:
2m
K: 15 m
E:
3m
L: 20 m
F:
4m
7. Connections
8:
A Brown, B White, C Blue, D Black
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
0:
One end
9. Cable Specifications
F:
Fire-retardant, robot cable
P:
Oil-resistant polyurethane cable
Round Water-resistant Connectors (M12)
XS5
127
■ XS5W - Socket and Plug on Cable Ends
XS5W-D42@-@81-F Fire-retardant, Robot Cable
XS5W-D42@-@81-P Oil-resistant Polyurethane Cable
TM
Dimensions
(Unit: mm)
Straight/straight
M12
M12
14.9 dia.
14.9 dia.
40.7
6 dia.
44.7
L (Cable length)
Angled/angled
M12
32.3
6 dia.
28.3
Wiring Diagram for 4 Cores
Terminal No.
L (Cable length)
Straight/angled
1
2
3
4
M12
Cable color of
core sheath
1
Brown
2
White
3
Blue
4
Black
32.3
6 dia.
40.7
L (Cable length)
Angled/straight
28.3
M12
6 dia.
44.7
L (Cable length)
Note: The overmolding on the Oil-resistant Polyerethane Cable (XS5W-D42@-@81-P ) is black, and the overmolding of the Fire-retardant, Robot
Cable (XS5W-D42@-@81-F) is warm gray.
128
Round Water-resistant Connectors (M12)
XS5
Ordering Information
Cable type
Cable length L
(m)
1
2
3
5
10
2
5
10
Fire-retardant,
robot cable
Oil-resistant
polyurethane cable
Cable type
Cable length L
(m)
Fire-retardant
robot cable
2
5
Model
Straight/straight
XS5W-D421-C81-F
XS5W-D421-D81-F
XS5W-D421-E81-F
XS5W-D421-G81-F
XS5W-D421-J81-F
XS5W-D421-D81-P
XS5W-D421-G81-P
XS5W-D421-J81-P
Angled/angled
—
XS5W-D422-D81-F
—
XS5W-D422-G81-F
—
—
—
—
Model
Straight/angled
XS5W-D423-D81-F
XS5W-D423-G81-F
Angled/straight
XS5W-D424-D81-F
XS5W-D424-G81-F
Standard pack
quantity
10
5
1
5
1
Standard pack
quantity
5
Note: 1. Ask your OMRON representative about other specifications.
2. XS5W-D42@ models with -F are cRUus approved.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
XS5W - D42@ - @81 - @
1
2 34 5
6 78
9
1. Type
Connectors connected to cable, socket and plug on cable ends
W:
2. AC/DC (Mating Section Form)
D:
DC
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating
5. Cable Connection Directions
1:
Straight/straight
2:
Angled/angled
3:
Straight (XS5F)/angled (XS5H)
4:
Angled (XS5F)/straight (XS5H)
6. Cable Length
A:
0.3 m
G: 5 m
B:
0.5 m
H: 7 m
C:
1m
J: 10 m
D:
2m
K: 15 m
E:
3m
L: 20 m
F:
4m
7. Connections
8:
A Brown, B White, C Blue, D Black
(Numbers inside circles are terminal numbers.)
8. Connectors on One End/Both Ends
1:
Both ends
9. Cable Specifications
F:
Fire-retardant, robot cable
P:
Oil-resistant polyurethane cable
Round Water-resistant Connectors (M12)
XS5
129
4-Pin and 5-Pin Assembly Connector
■ XS5C Sockets
TM
Dimensions
(Unit: mm)
XS5C-D418 (IDC Model)
Straight Connectors
62.4
54.4
M12
17.5 dia. 14.9 dia.
XS5C-D4C@ (Crimping Model)
XS5C-D42@ (Soldering Model)
Straight Connectors
XS5C-D4C@ (Soldering Model)
XS5C-D42@ (Soldering Model)
Angled Connectors
M12
14.9 dia.
14.2 dia.
14.9 dia.
23
43.4
XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm)
Straight Connectors
54.9
20 dia. 14.9 dia.
16 dia.
XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm)
Straight Connectors
54.9
20 dia. 14.9 dia.
XS5C-D@S@ (Screw-on Connectors)
Angled Connectors
14 dia.
35.9
20 dia. 14.9 dia.
39.6
14 dia.
130
31.8
M12
Round Water-resistant Connectors (M12)
XS5
Ordering Information
No. of Poles
Connection
Method
Suitable cable dia.
(mm)
IDC
3 to 8 mm
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
Crimping
Soldering
4
Screw-on
5
Screw-on
Model
Straight
XS5C-D418
XS5C-D4C1
XS5C-D4C3
XS5C-D4C5
XS5C-D421
XS5C-D423
XS5C-D425
XS5C-D4S1
XS5C-D4S3
XS5C-D4S5
XS5C-D4S7
XS5C-D4S9
XS5C-D5S1
XS5C-D5S3
XS5C-D5S5
XS5C-D5S7
XS5C-D5S9
Standard pack
quantity
Angled
—
XS5C-D4C2
XS5C-D4C4
XS5C-D4C6
XS5C-D422
XS5C-D424
XS5C-D426
XS5C-D4S2
XS5C-D4S4
XS5C-D4S6
—
—
—
—
—
—
—
1
Note: 4 pole XS5C models are cRUus approved. IDC version (XS5C-D418) is pending approval.
■ XS5U
(Crimping pin for XS5C)
Dimensions
(Unit: mm)
XS5U-222@
Socket Pin
Dimensions
Slit
1.5
B
A
Dimension (mm)
A
B
C
No. of
slits
to 0.3
XS5U-2221 (220.18
to 24 AWG)
16.7
6.1
0.8
1
to 0.7
XS5U-2222 (180.5
to 20 AWG)
16.8
6.2
1.3
0
C dia. 2 dia. 2.3 dia.
Model
Suitable core
size (mm2)
Note: 1. A special tool must be used for crimping. For details, refer to the “XS5/XS2 - Assembly Tooling and Accessories” datasheet.
2. AWG size is based on UL1007 wire.
Ordering Information
Suitable core size (mm2)
Model
Standard Pack
Quantity
0.18 to 0.3
0.5 to 0.75
XS5U-2221
XS5U-2222
100
Round Water-resistant Connectors (M12)
XS5
131
■ XS5G - Plugs
TM
Dimensions
(Unit: mm)
XS5G-D418 (IDC Model)
Straight Connectors
66
M12
58
17.5 dia. 14.9 dia.
XS5G-D4C@ (Crimping Model)
XS5G-D42@ (Soldering Model)
Straight Connectors
XS5G-D42@ (Soldering Model)
Angled Connectors
M12
37.7
M12
14.9 dia.
14.9 dia.
14.2 dia.
23
49.3
XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8mm)
Straight Connectors
58.7
20 dia. 14.9 dia.
16 dia.
XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6mm)
Straight Connectors
58.7
20 dia. 14.9 dia.
XS5G-D@S@ (Screw-on Connectors)
Angled Connectors
14 dia.
39.7
20 dia.
39.6
14 dia.
132
Round Water-resistant Connectors (M12)
XS5
Ordering Information
No. of Poles
Connection
Method
Suitable cable dia.
(mm)
IDC
3 to 8 mm
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
6 mm (5 to 6)
4 mm (4 to 5)
3 mm (3 to 4)
8 mm (7 to 8)
7 mm (6 to 7)
Crimping
Soldering
4
Screw-on
5
Screw-on
Model
Straight
XS5G-D418
XS5G-D4C1
XS5G-D4C3
XS5G-D4C5
XS5G-D421
XS5G-D423
XS5G-D425
XS5G-D4S1
XS5G-D4S3
XS5G-D4S5
XS5G-D4S7
XS5G-D4S9
XS5G-D5S1
XS5G-D5S3
XS5G-D5S5
XS5G-D5S7
XS5G-D5S9
Standard pack
quantity
Angled
—
—
—
—
XS5G-D422
XS5G-D424
XS5G-D426
XS5G-D4S2
XS5G-D4S4
XS5G-D4S6
—
—
—
—
—
—
—
1
Note: 1. XS5G Screw-on Plugs cannot be connected side-by-side to the CN1 and CN2 connectors of XS2R or XS5R Y-Joint Sockets / Plugs
2. 4 pole XS5G models are cRUus approved. IDC version (XS5G-D418) is pending approval.
■ XS5U
(Crimping pin for XS5G)
Dimensions
(Unit: mm)
XS5U-312@
Plug Pin
Dimensions
Slit
1 dia.
1.5
B
A
Dimension (mm)
A
B
C
No. of
slits
to 0.3
XS5U-3121 (220.18
to 24 AWG)
22.6
6.1
0.8
1
to 0.7
XS5U-3122 (180.5
to 20 AWG)
22.7
6.2
1.3
0
2 dia. 2.3 dia.
C dia.
Model
Suitable core
size (mm2)
Note: 1. A special tool must be used for crimping. For details, refer to the “XS5/XS2 - Assembly Tooling and Accessories” datasheet.
2. AWG size is based on UL1007 wire.
Ordering Information
Suitable core size (mm2)
Model
Standard Pack
Quantity
0.18 to 0.3
0.5 to 0.75
XS5U-3121
XS5U-3122
100
Round Water-resistant Connectors (M12)
XS5
133
4-Pin Y-Joint Plug/Socket Connectors
■ XS5R
TM
Dimensions
(Unit: mm)
XS5R-D426-@11-F
Connectors on Both Ends (Y-Joint Plug/Socket)
Wiring Diagram
45.5
15.0
4.6 dia.
CN2
1 2
4 3
35.0
1
2
3
4
CN2
6 dia.
4
1
18.0
1 2
4 3
CN1
Blue marking
8.5
44.7
XS5R-D426-@10-F
Connectors on One Cable End (Y-Joint Socket)
15.0
1
2
3
4
CN1
13.6
L (Cable length)
Wiring Diagram
45.5
1
2
3
4
CN2
4.6 dia.
CN2
1 2
4 3
1 2
4 3
Blue
White
Blue marking
13.6
Brown
+20
50 −10
Wiring Diagram
XS5R-D426-1
27
7
15
5±3
30±5
XS5R-D426-@
Y-Joint Plug/Socket without Cable
(37)
1
2
3
4
CN1
8.5
CN1
L (Cable length)
1 2
4 3
Black
6 dia.
18.0
35.0
4
3
2
1
3
2
CN2
4
3
2
1
CN1
4
3
2
1
4.5 dia.
CN2
CN0
XS5R-D426-5
CN2
4
3
2
1
CN1
4
3
2
1
24.5
4
3
2
1
18
2
1
4 3
12.5
CN1
4
3
2
1
CN0
CN0
58.3
Blue marking
Ordering Information
Cable
Connector
Connectors on both cable
ends
With cable
Connector on one cable end
With no cable
Y-Joint Plug/Socket
Cable length (m)
0.5
1
2
3
2
5
---
Model
XS5R-D426-B11-F
XS5R-D426-C11-F
XS5R-D426-D11-F
XS5R-D426-E11-F
XS5R-D426-D10-F
XS5R-D426-G10-F
XS5R-D426-1
XS5R-D426-5
Standard pack quantity
10
5
10
Note: XS2G and XS5G Assembled Connectors with screw connections cannot be connected to both CN1 and CN2 at the same time.
134
Round Water-resistant Connectors (M12)
XS5
4-Pin Panel-mount Connectors
■ XS5P - Sockets
TM
Dimensions
(Unit: mm)
XS5P-D426-5
Front Panel-mounting Sockets for Rear Lock Nuts
2.8
17
18
PG9
M12
White
Blue
500
2
3
18
14.6 dia.
1
20
4
10±3
(20)
Brown
Black
11.9
2.5
22.1
XS5P-D427-5
Rear Panel-mounting Sockets for Front Lock Nuts
18
PG9
M12
17
2.8
500
Blue
White
2
20
3
13.9 dia.
1
18
4
10±3
10.5
22.1
(20)
Black
Brown
2.5
Panel Cutout
Wiring and Wire Specifications
+0.1
0 dia.
15.3
Wiring
Pin number
1
2
3
4
Panel Cutout Dimension
Panel thickness = 1 to 4 mm
Note: 1. The panel cutout dimension is the same for Front-locking
and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Color
Brown
White
Blue
Black
Wire Specifications
Item
Specification
Nominal size
Number of wires
Configuration
Wire diameter
Standard outer diameter
Specification
UL1007
AWG20
21
0.18
1.8
Ordering Information
Type
With cable
Lock
Rear lock
Front lock
Cable length (m)
0.5
Model
Standard pack,
quantity
XS5P-D426-5
10
XS5P-D427-5
Round Water-resistant Connectors (M12)
XS5
135
■ XS5M - Plugs
TM
Dimensions
(Unit: mm)
XS5M-D426-5
Front Panel-mounting Plugs for Rear Lock Nuts
2.8
18
18
PG9
M12
White
Brown
500
1
4
17
20
2
3
10±3
(20)
Blue
Black
10
2.8
22.8
XS5M-D427-5
Rear Panel-mounting Plugs for Front Lock Nuts
18
18
PG9 2.8
500
M12
White
Brown
1
4
20
17
2
3
10±3
8
(20)
Blue
Black
2.8
22.8
Panel Cutout
Wiring and Wire Specifications
Wiring
+0.1
0 dia.
15.3
Pin number
1
2
3
4
Panel Cutout Dimension
Panel thickness = 1 to 4 mm
Note: 1. The panel cutout dimension is the same for Front-locking
and Rear-locking Sockets.
2. Rotational positioning is not possible for connector rotation.
Color
Brown
White
Blue
Black
Wire Specifications
Item
Specification
Nominal size
Number of wires
Configuration
Wire diameter
Standard outer diameter
Specification
UL1007
AWG20
21
0.18
1.8
Ordering Information
Type
Lock
With cable
136
Rear lock
Front lock
Cable length (m)
XS5M-D426-5
0.5
Round Water-resistant Connectors (M12)
Model
XS5M-D427-5
XS5
Standard pack,
quantity
10
Precautions
Note: 1. See “XS5/XS2 - Assembly Tooling and Accessories” datasheet for information and precautions regarding assembly, tooling and accessories that are
common to the XS5 and XS2 connectors, along with assembly details for the NEW IDC Field-wiring versions of the XS5C and XS5G connectors.
2. See “XS2” datasheet for specifics regarding those connectors
■ Correct Use
■ Connecting the XS5
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
1. Connecting the XS5 Plug and Socket
Connector Connection and Disconnection
• Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.
• When connecting or disconnecting Connectors, be sure to hold the
Connectors by hand.
Polarity key
Protrusion on
cover aligns with
polarity key.
• Do not hold the cable when disconnecting Connectors.
• When mating Connectors, be sure to insert the plug all the way to
the back of the socket before attempting to lock the Connectors.
• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
• When mating the Connectors to XS2 or other M12 Connectors,
tighten the lock by hand to a torque of 0.39 to 0.49 N⋅m.
• Hold the knurled socket grip, then insert the projection on the plug
into the groove of the socket.
Wiring
• Always confirm wiring diagrams before wiring sensors, limit
switches, or other devices.
• Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
Degree of Protection
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not the Connectors underwater.
• Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors.
• Turn the knurled grips of the socket clockwise approximately
45 degrees in respect to the plug. A click will indicate that the
Connectors are locked. The locking condition can also be
confirmed by the alignment marks on the plug and socket.
■ General Precautions
• Do not pull excessively on the Connectors or cables. Do not install
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.
• Install the Connectors and cables where they will not be stepped
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
• Refer to the specifications for your cables before bending the
cables and do not bend them past their minimum bending radius.
• If sensors or switches are not attached during installation, protect
the mating surface of the Connector with a XS2Z-22 Waterproof
Cover of XS2Z-14/15 Dust Cover.
Alignment marks
2. Connecting the XS5 and XS2
• Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.
• In the same way as when connecting two XS2 Connectors, screw
the knurled grip in the clockwise direction.
• Use your fingers to tighten the Connectors sufficiently.
Round Water-resistant Connectors (M12)
XS5
137
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X304-E-1c
07/13
Specifications subject to change without notice
Round Water-resistant Connectors (M12)
XS5
Printed in USA
