XS5H-T422-EM0-K

Industrial Ethernet Connectors XS5@-T / XS6@-T Support for Ethernet/IP, EtherCAT, and Other Popular Networks Based on Ethernet • Combines tough RJ45 Connectors for use outside of panels and Environment-resistance Connectors with IP67 protection (M12). • M12 Smartclick mates with any threaded M12 socket and provides 'twist and click' connection with XS5P-T panel socket. • M12 Smartclick connectors are shielded to protect against EMI. • Separate RJ45 assembly connectors are available for easy wiring on site. • Uses AWG22 Cat5E cables that are suitable for wiring outside of panels. TM ■ Specifications Type Cable with Connector Cable with Connectors Cable with Connectors on Cable with Connectors on on One End (M12) on Both Ends (M12/M12) Both Ends (M12/RJ45) Both Ends (RJ45/RJ45) Item / Model XS5H-T421-@M0-K Rated current 3A Rated voltage 30 V XS5W-T421-@M2-K XS5W-T421-@MC-K XS5W-T421-@MD-K RJ45 Assembly Connector XS6G-T421-1 2.5 A M12 Connector for Panel Mounting XS5P-T42@-5 3A Contact resistance 20 mΩ max. Insulation resistance 500 MΩ min. Withstand voltage 1,000 VAC for 60 s (leak current: 1 mA max.) Ambient operating −25 to 70°C temperature −40 to 70°C −25 to 70°C Ambient storage temperature −25 to 70°C −40 to 70°C −25 to 70°C Degree of protection M12: IEC IP67, RJ45: IEC IP20 ■ Materials and Finish Connector Item Cable Model M12 Contact Block PBT plastic (UL94V-0), light gray Contacts Materials Phosphor bronze Finish Nickel base, 0.4-μm gold-plating RJ45 PA plastic (UL94V-0), black Nickel base, 1.4-μm gold-plating Fixtures Nickel-plated zinc alloy — Cover PBT — O-ring Rubber — Note: TM Specifications UL CM PVC (double shielding) Cat. 5E Cores and colors AWG22 (0.26/7): Yellow, orange, white, and blue Outer Diameter 6.5 mm Sheath color Light blue is a registered trademark of the OMRON Corporation. Industrial Ethernet Connectors XS5@-T / XS6@-T 1 4-Pin Connectors with Cable Attached ■ XS5H - Plug on One Cable End XS5H-T421-@M0-K (1 x M12) TM Dimensions (Unit: mm) L (cable length) 44.7 2 1 3 14.9 dia. 4 M12 D - Coding Ordering Information Type Cable length L (m) Cable with Connector on One End (M12) 0.5 1 2 3 5 10 15 Model Straight XS5H-T421-BM0-K XS5H-T421-CM0-K XS5H-T421-DM0-K XS5H-T421-EM0-K XS5H-T421-GM0-K XS5H-T421-JM0-K XS5H-T421-KM0-K Note: Ask your OMRON representative about other specifications. Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS5H - T421 - @M@ -K 1 2 34 5 6 7 8 9 1. Type H: Connector connected to cable, M12 plug on one cable end 2. Signal type T: Ethernet 3. Connector Poles 4: 4 poles 4. Contact Plating 2: 0.4-μm gold plating - M12 connectors 5. Cable Connection Direction 1: Straight 2 Industrial Ethernet Connectors 6. Cable Length A: 0.3 m G: 5 m B: 0.5 m J: 10 m C: 1m K: 15 m D: 2m E: 3m 7. Connections M: A Yellow, B White, C Orange, D Blue (Numbers inside circles are terminal numbers) 8. Connectors on One End/Both Ends 0: One M12 Plug 9. Cable Specifications K: UL CM PVC (double shielded) / Cat.5E XS5@-T / XS6@-T ■ XS5W - Plugs on Both Cable Ends XS5W-T421-@M2-K (2 x M12) TM Dimensions (Unit: mm) L (cable length) 44.7 2 1 3 44.7 14.9 dia. 14.9 dia. 4 M12 D - Coding M12 Ordering Information Type Cable length L (m) Cable with Connector on Both Ends (M12 / M12) 0.5 1 2 3 5 10 15 Model Straight XS5W-T421-BM2-K XS5W-T421-CM2-K XS5W-T421-DM2-K XS5W-T421-EM2-K XS5W-T421-GM2-K XS5W-T421-JM2-K XS5W-T421-KM2-K XS5W-T421-@MC-K (1x M12 and 1x RJ45) TM Dimensions (Unit: mm) L (cable length) 44.7 2 1 3 54.7 14.9 dia. 4 D - Coding M12 RJ45 Ordering Information Type Cable length L (m) Cable with Connector on Both Ends (M12 / RJ45) 0.3 0.5 1 2 3 5 10 15 Model Straight XS5W-T421-AMC-K XS5W-T421-BMC-K XS5W-T421-CMC-K XS5W-T421-DMC-K XS5W-T421-EMC-K XS5W-T421-GMC-K XS5W-T421-JMC-K XS5W-T421-KMC-K Note: Ask your OMRON representative about other specifications. Industrial Ethernet Connectors XS5@-T / XS6@-T 3 XS5W-T421-@MD-K (2 x RJ45) Dimensions (Unit: mm) L (cable length) 54.7 54.7 RJ45 RJ45 Ordering Information Type Cable length L (m) Cable with Connector on Both Ends (RJ45 / RJ45) 0.3 0.5 1 2 3 5 10 15 Model Straight XS5W-T421-AMD-K XS5W-T421-BMD-K XS5W-T421-CMD-K XS5W-T421-DMD-K XS5W-T421-EMD-K XS5W-T421-GMD-K XS5W-T421-JMD-K XS5W-T421-KMD-K Note: Ask your OMRON representative about other specifications. Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS5W - T421 - @M@ -K 1 2 34 5 6 7 8 9 1. Type W: Connector connected to cable, plugs on both cable ends 2. Signal type T: Ethernet 3. Connector Poles 4: 4 poles 4. Contact Plating 2: 0.4-μm gold plating - M12 connectors 1.4 μm gold plating - RJ45 connectors 5. Cable Connection Direction 1: Straight 4 Industrial Ethernet Connectors 6. Cable Length A: 0.3 m G: 5 m B: 0.5 m J: 10 m C: 1m K: 15 m D: 2m E: 3m 7. Connections M: A Yellow, B White, C Orange, D Blue (Numbers inside circles are terminal numbers) 8. Connectors on One End/Both Ends 2: Two M12 Plugs C: One M12 Plug + One RJ45 Plug D: Two RJ45 Plugs 9. Cable Specifications K: UL CM PVC (double shielded) / Cat.5E XS5@-T / XS6@-T Assembly Connector - RJ45 ■ XS6G - Plugs XS6G-T421-1 Dimensions (Unit: mm) 52.6 11.8 11.3 8.1 Contact 6 Contact 1 Applicable wires 6.1 to 6.9 dia. Stranded wires: AWG22 to AWG24 Solid wires: AWG22 to AWG23 Contact 2 Contact 3 Ordering Information Type Cable length L (m) RJ45 Assembly Connector --- Model Straight XS6G-T421-1 4-Pin Panel-mount Connectors ■ XS5P - Sockets XS5P-T42@-5 (Rear or Front locking M12 socket) Dimensions (Unit: mm) Wiring XS5P-T426-5 (Rear Locking) M12 PG9 18 2.8 17 18 Orange 500 White 14.6 dia. 20 10±3 2.5 D - Coding 11.9 Panel Cutout Dimension 22.1 15.3 +0.1 0 dia. XS5P-T427-5 (Front Locking) M12 17 PG9 20 Panel thickness (t) = 1 to 4 2.8 18 500 Orange White 18 13.9 dia. 10±3 D - Coding Color Yellow White Orange Blue Yellow Blue (20) Terminal No. 1 2 3 4 10.5 22.1 (20) Blue 2.5 Yellow Note 1: The panel cutout dimension is the same for Front-locking and Rearlocking Connectors. Note 2: Rotational positioning is not possible for connector rotation. Ordering Information Type M12 Connector for Panel Mounting Cable length L (m) Rear Locking Front Locking 0.5 m 0.5 m Industrial Ethernet Connectors Model Straight XS5P-T426-5 XS5P-T427-5 XS5@-T / XS6@-T 5 Precautions ■ Correct Use ■ General Precautions Do not use the Connectors in an atmosphere or environment that exceeds the specifications. Connector Connection and Disconnection • When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. • Do not hold the cable when disconnecting Connectors. • When mating Connectors, be sure to insert the plug all the way to the back of the socket before attempting to lock the Connectors. • Do not use tools of any sort to mate the Connectors. Always use your hands. Pliers or other tools may damage the Connectors. • Do not pull excessively on the Connectors or cables. Do not install the Connectors or cables in any way that would place a load directly on the mating section or cable connections. Doing so can damage the Connectors or break the wires inside the cables. • Install the Connectors and cables where they will not be stepped on to prevent the wires inside the cables from being broken and to prevent the Connectors from being damaged. If the Connectors or cables must be installed where they might be stepped on, protect them with covers. • Refer to the specifications for your cables before bending the cables and do not bend them past their minimum bending radius. Wiring • Lay the cables so that external force is not applied to the Connectors. Otherwise, the degree of protection (IP67) may not be achieved. Degree of Protection • The degree of protection of Connectors (IP67) is not for a fully watertight structure. Do not the Connectors underwater. • Do not step on or place any objects on the Connectors. Doing so may damage the Connectors. 6 Industrial Ethernet Connectors XS5@-T / XS6@-T MEMO Industrial Ethernet Connectors XS5@-T / XS6@-T 7 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. G019-E-01 8 11/10 Industrial Ethernet Connectors Specifications subject to change without notice XS5@-T / XS6@-T Printed in USA