XW2C-20G5-IN16

9 Input Screw Terminal Block XW2C Consolidate Inputs for Omron High-density I/O Modules 1 Power supply common terminals for input devices 1 Operation indicators make it possible to monitor the ON and OFF conditions of input signals with ease 1 DIN track and screw mounting are available 1 Dedicated cables to Omron PLC I/O modules available, order separately Ordering Information 3 INPUT SCREW TERMINAL BLOCK Appearance Number of input points 16 Input mode NPN input (negative common) Part number XW2C-20G5-IN16 3 CONNECTING CABLES Appearance Applicable terminal block XW2C-20G5-IN16 Single cable for 32 oint I/O modules 32-point XW2C-20G5-IN16 Bifurcated cable for 32- and 64-point I/O modules Cable length Part number 0.5 m (1.64 ft) XW2Z-050A 1 m (3.28 ft) XW2Z-100A 1.5 m (4.92 ft) XW2Z-150A 2 m (6.56 ft) XW2Z-200A 3 m (9.84 ft) XW2Z-300A 5 m (16.40 ft) XW2Z-500A 1 m (3.28 ft) and 0.75 m (2.46 ft) XW2Z-100D 1.5 m (4.92 ft) and 1.25 m (4.10 ft) XW2Z-150D 2 m (6.56 ft) and 1.75 m (5.74 ft) XW2Z-200D 3 m (9.84 ft) and 2.75 m (9.02 ft) XW2Z-300D 5 m (16.40 ft) and 4.75 m (15.58 ft) XW2Z-500D XW2C XW2C Specifications 3 INPUT SCREW TERMINAL BLOCK Rated current 1 A/common Rated voltage 12 to 24 VDC Number of inputs 16 Input indicator Orange LED Power supply voltage range 12 to 24 VDC±5% LED current 10 mA/point at 24 VDC Insulation resistance 50 MΩ min. at 500 VDC Dielectric strength 500 VAC for 1 minute Enclosure rating IP10 (IEC529) Electrical protection Class 0 Ambient temperature Operating: 0°C to 55°C (32°F to 131°F) 3 CONNECTORS Ratings/Characteristics Item Rating Rated current 1 A at 20°C (68°F) Rated voltage 125 VAC Contact resistance 20 mΩ max. with 100 mA at 20 mV max. (See Note 1) Insulation resistance 100 MΩ min. at 500 VDC Dielectric strength 500 VAC for 1 minute with a current leakage of 1 mA max. (See Note 2) Enclosure rating IP00 Electrical protection Class 0 Ambient temperature Operating: --25°C to 80°C (--13°F to 176°F) Note: 1. The resistance indicated is the contact resistance of the connector. 2. The voltage indicated is the dielectric strength of the connector. Materials/Finish Item Connector Parts XG4M-2030 XG4M 4030 XG4M-4030 XG4M-6030 Housing Materials/Processing Black PBT resin with g glass ((UL94V-0)) Cover Contact Contact--carrying portion: Press--fit portion: XG4T-2004 XG4T-4004 XG4T-6004 Strain relief Black PBT resin with glass (UL94V-0) FCN-367J024-AU/F FCN 367J040 AU/F FCN-367J040-AU/F Housing Black PBT resin (UL94V-0) Contact Contact-carrying portion: Press-fit portion: Screw Nickel-plated steel Cable UL2464 interface cable Equivalent to AWG28 Crimp terminal Fork-type crimp terminal Equivalent to 1.25YAS3.5 2 Phosphor bronze and nickel plated with 0.15-µm-thick gold Phosphor bronze and nickel plated with 2.0-µm-thick tin Gold-plated phosphor bronze Tin-plated phosphor bronze XW2C XW2C Dimensions Unit: mm (inch) XW2C-20G5-IN16 Flat-cable connector (MIL-type plug) 160 (6.30) Two, 4,5 dia. 150 50 42 (1.97) Terminal Lock for DIN track mounting 8.5 1.2 7.3 56 (2.20) 35 8.5 38.01 50 (1.97) 3 XW2C XW2C 3 TERMINAL ARRANGEMENT XG4A-2031 Flat-cable Connector (mated side) Triangle mark Terminal Brown (white) Blue (black) Brown (red) Blue (black) Black (white) External power supply 12 to 24 VDC Photoelectric Sensor Proximity Sensor (3-wire Sensor with NPN output and built-in amplifier) 4 2-wire DC Proximity Sensor Note: IEC lead wire colors of Photoelectric Sensors and Proximity Sensors are shown first. Colors in parentheses are previous ones. Limit Switch XW2C XW2C Precautions 3 WIRING 3 MOUNTING Do not wire the Terminal Block while power is supplied, or the terminals may be short-circuited with the cable and the unit may malfunction. More than one XW2C Input Control Terminal Block can be densely mounted to a DIN track. To do this, move the mounting stays from both sides of the XW2C to the bottom of the XW2C. Do not connect or disconnect the connector while power is supplied to the Terminal Block, otherwise it may malfunction. Secure both ends of the XW2C with end plates. 3 TERMINAL WIRE CONNECTIONS When connecting crimp terminals or wires to the terminal block, be sure to tighten each crimp terminal or wire to 0.59 N • m (6 kgf • cm). The wires can be connected to the M3.5 screw terminal via the following crimp terminals: 2-3.5 type (round type) 2Y-3.5 type (fork type) Terminal Screw Tightening Torque 5 XW2C XW2C NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 9 OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465 Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A.