XW4L-08A1-V1

XW4H/XW4K/XW4L PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch Push-in Terminals to Easily Complete Connections. PCB Terminal Blocks with 2.54mm Pitch. • Push-in connection method allows repeated repairs. • Hold-down structure for strength on PCBs. • Active lock mechanism for superior vibration and shock resistance. • Both vertical and horizontal models available. • Suction cover included to enable automatic mounting. (XW4K/XW4L vertical models) • Can be mounted to the back surfaces of PCBs. • Small reel are available. (XW4K/XW4L only) • See the "Standards certification / conformity list" for information on conformity to certification standards. Features • Just insert solid wires or ferrules to complete wiring. With Stranded wires, all you need is a flat-blade screwdriver. Solid wire or ferrule Stranded wires Connection completed! Insert the screwdriver into the release hole and then insert the stranded wires. XW4Z-00A • Hold-downs are provided on both ends to achieve robust mounting by increasing solder mounting strength. The hold-downs are circled in red. • An active lock mechanism prevents the Terminal Blocks from coming off to provide superior vibration and shock resistance. Active locks 1 XW4H/XW4K/XW4L Connection Examples XW4H-@@A1 XW4L-@@A1-V1 XW4K-@@A1-H1 XW4K-@@A1-V1 XW4L-@@A1-H1 XW4H-@@A1 Model Number Legend XW4 - (1) A1(2) (3) (4) - (6) (5) (1)Series Code H K L (2)Terminal Block Number of Contacts Type SMT Terminal Block Connector, Wire Side SMT Terminal Block Connector, Board Side SMT Terminal Block Direct Board Mounting Code 02 03 04 05 06 07 08 09 10 11 12 Number of contacts 2 contacts 3 contacts 4 contacts 5 contacts 6 contacts 7 contacts 8 contacts 9 contacts 10 contacts 11 contacts 12 contacts (3)Terminal Pitch Code A Pitch 2.54mm (4)Number of Rows and Specifications Code 1 Number of rows 1 row (5)Connector Shape * Code H1 V1 Appearance Horizontal Vertical (6)Small reel * Code R100 Quantity 100 pcs * XW4K/XW4L only. Terminal Blocks Models XW4H-@@A1 XW4K-@@A1-V1 Connector, Wire-side Sockets Connector, Board-side Vertical Plugs XW4K-@@A1-H1 Connector, Board-side Horizontal Plugs Appearance Page Models Page 4 Page 5 XW4L-@@A1-V1 Direct-board-mounting, Vertical Sockets Page 5 XW4L-@@A1-H1 Direct-board-mounting, Horizontal Sockets Appearance Page Page 6 Note: @@ is replaced by the number of contacts. 2 Page 6 XW4H/XW4K/XW4L Ratings and Specifications Rated voltage 160 VAC Rated current * 6A Dielectric strength 1,400 V for 1 min Insulation resistance 1,000 MΩ min. Wire stripping length 6 mm Operating temperature -40 to 125°C (with no condensation or icing) * This is the maximum value for the connector. If the rated current of the cable is lower than the rated current of the connector, use the rated current of the cable. Materials and Finishes Applicable Wires Housing LCP/Black Solid wires 0.14 to 0.5 mm2 Contacts Copper alloy/tin plated Stranded wires 0.2 to 0.5 mm2 Spring SUS Ferrules 0.25 to 0.34 mm2 AWG 26 to 20 3 XW4H/XW4K/XW4L XW4H Connectors, Wire Side Dimensions (Unit: mm) XW4H-@@A1 Dimensions L+7 Models 10.5 14.2 A 4.9 2.54 L Number of contacts L A XW4H-02A1 2 2.54 10.38 XW4H-03A1 3 5.08 12.92 XW4H-04A1 4 7.62 15.46 XW4H-05A1 5 10.16 18.00 XW4H-06A1 6 12.70 20.54 XW4H-07A1 7 15.24 23.08 XW4H-08A1 8 17.78 25.62 XW4H-09A1 9 20.32 28.16 XW4H-10A1 10 22.86 30.70 XW4H-11A1 11 25.40 33.24 XW4H-12A1 12 27.94 35.78 Models Connector, Wire-side Sockets Appearance Number of contacts Models 2 XW4H-02A1 3 XW4H-03A1 4 XW4H-04A1 5 XW4H-05A1 6 XW4H-06A1 7 XW4H-07A1 8 XW4H-08A1 9 XW4H-09A1 10 XW4H-10A1 11 XW4H-11A1 12 XW4H-12A1 Minimum ordering quantity (pieces) 100 75 50 25 Mating Diagram (Unit: mm) XW4H 16.95 XW4K-V1 16.95 XW4H XW4K-H1 4 XW4H/XW4K/XW4L XW4K Connectors, Board Side, Vertical and Horizontal Dimensions (Unit: mm) Vertical XW4K-@@A1-V1 PCB Mating Dimensions (TOP VIEW) Suction cover * Positioning boss hole 1 dia. 2.54 L Dimensions B+1.27 Pin1 B+1.27 0.6 3.3 A 8.8 5 6 3.75 5.5 0.9 B B+2.54 C 7.45 6.45 0.55 Models 1.1 0.6 L+2.54 0.8 dia. L+5.08 B B+2.54 C (Tolerance: ±0.05) Note: The overall pattern pitch tolerance for the board is ±0.05. Do not accumulate error. * The 1-mm diameter holes are for the positioning bosses. Use metal masks to prevent solder from entering these holes. Number of contacts L A B C XW4K-02A1-V1 2 2.54 10.39 1.27 5.42 XW4K-03A1-V1 3 5.08 12.93 2.54 6.69 XW4K-04A1-V1 4 7.62 15.47 3.81 7.96 XW4K-05A1-V1 5 10.16 18.01 5.08 9.23 XW4K-06A1-V1 6 12.70 20.55 6.35 10.50 XW4K-07A1-V1 7 15.24 23.09 7.62 11.77 XW4K-08A1-V1 8 17.78 25.63 8.89 13.04 XW4K-09A1-V1 9 20.32 28.17 10.16 14.31 XW4K-10A1-V1 10 22.86 30.71 11.43 15.58 XW4K-11A1-V1 11 25.40 33.25 12.70 16.85 XW4K-12A1-V1 12 27.94 35.79 13.97 18.12 Horizontal XW4K-@@A1-H1 7 6.45 2.54 5 0.6 0.9 PCB Mating Dimensions (TOP VIEW) L A 0.8 dia. * Positioning boss hole B+1.27 1 dia. Pin1 3.5 0.2 B+1.27 Dimensions 1.1 6 4.1 2.54 B L+2.54 B+2.54 C L+5.08 Models 0.4 B B+2.54 C (Tolerance: ±0.05) Note: The overall pattern pitch tolerance for the board is ±0.05. Do not accumulate error. * The 1-mm diameter holes are for the positioning bosses. Use metal masks to prevent solder from entering these holes. Number of contacts L A B C XW4K-02A1-H1 2 2.54 10.39 1.27 5.42 XW4K-03A1-H1 3 5.08 12.93 2.54 6.69 XW4K-04A1-H1 4 7.62 15.47 3.81 7.96 XW4K-05A1-H1 5 10.16 18.01 5.08 9.23 XW4K-06A1-H1 6 12.70 20.55 6.35 10.50 XW4K-07A1-H1 7 15.24 23.09 7.62 11.77 XW4K-08A1-H1 8 17.78 25.63 8.89 13.04 XW4K-09A1-H1 9 20.32 28.17 10.16 14.31 XW4K-10A1-H1 10 22.86 30.71 11.43 15.58 XW4K-11A1-H1 11 25.40 33.25 12.70 16.85 XW4K-12A1-H1 12 27.94 35.79 13.97 18.12 Models Connector, Board-side Vertical Plugs Connector, Board-side Horizontal Plugs Appearance Number of contacts 500 pcs per reel * 100 pcs per reel * 600 pcs per reel * 100 pcs per reel * 2 XW4K-02A1-V1 XW4K-02A1-V1-R100 XW4K-02A1-H1 XW4K-02A1-H1-R100 3 XW4K-03A1-V1 XW4K-03A1-V1-R100 XW4K-03A1-H1 XW4K-03A1-H1-R100 4 XW4K-04A1-V1 XW4K-04A1-V1-R100 XW4K-04A1-H1 XW4K-04A1-H1-R100 5 XW4K-05A1-V1 XW4K-05A1-V1-R100 XW4K-05A1-H1 XW4K-05A1-H1-R100 6 XW4K-06A1-V1 XW4K-06A1-V1-R100 XW4K-06A1-H1 XW4K-06A1-H1-R100 7 XW4K-07A1-V1 XW4K-07A1-V1-R100 XW4K-07A1-H1 XW4K-07A1-H1-R100 8 XW4K-08A1-V1 XW4K-08A1-V1-R100 XW4K-08A1-H1 XW4K-08A1-H1-R100 9 XW4K-09A1-V1 XW4K-09A1-V1-R100 XW4K-09A1-H1 XW4K-09A1-H1-R100 10 XW4K-10A1-V1 XW4K-10A1-V1-R100 XW4K-10A1-H1 XW4K-10A1-H1-R100 11 XW4K-11A1-V1 XW4K-11A1-V1-R100 XW4K-11A1-H1 XW4K-11A1-H1-R100 12 XW4K-12A1-V1 XW4K-12A1-V1-R100 XW4K-12A1-H1 XW4K-12A1-H1-R100 * Please order an integer multiple of the quantity per reel. 5 XW4H/XW4K/XW4L XW4L Direct Board Mounting, Vertical and Horizontal Dimensions (Unit: mm) Vertical XW4L-@@A1-V1 PCB Mating Dimensions (TOP VIEW) Suction cover B+1.27 * Positioning boss hole 1 dia. 2.54 L B 2.54 B+1.27 B 1.3 L+5.08 A 8.8 L+2.98 4.9 5.5 6 4.15 3.3 6 6 4.15 3.3 0.6 C B+2.54 10.6 9.6 0.6 1.1 C B+2.54 D 0.6 (Tolerance: ±0.05) Note: The overall pattern pitch tolerance for the board is ±0.05. Do not accumulate error. * The 1-mm diameter holes are for the positioning bosses. Use metal masks to prevent solder from entering these holes. 3.1 D L+2.54 0.8 dia. Dimensions Models Number of contacts L A B C D XW4L-02A1-V1 2 2.54 9.77 1.27 2.22 5.16 XW4L-03A1-V1 3 5.08 12.31 2.54 3.49 6.43 XW4L-04A1-V1 4 7.62 14.85 3.81 4.76 7.70 XW4L-05A1-V1 5 10.16 17.39 5.08 6.03 8.97 XW4L-06A1-V1 6 12.70 19.93 6.35 7.30 10.24 XW4L-07A1-V1 7 15.24 22.47 7.62 8.57 11.51 XW4L-08A1-V1 8 17.78 25.01 8.89 9.84 12.78 XW4L-09A1-V1 9 20.32 27.55 10.16 11.11 14.05 XW4L-10A1-V1 10 22.86 30.09 11.43 12.38 15.32 XW4L-11A1-V1 11 25.40 32.63 12.70 13.65 16.59 XW4L-12A1-V1 12 27.94 35.17 13.97 14.92 17.86 Horizontal XW4L-@@A1-H1 9.2 PCB Mating Dimensions (TOP VIEW) Pin1 5 D 0.9 2.54 0.8 dia. L L+5.08 4.2 D B+2.54 B+1.27 * Positioning boss hole 1 dia. 0.75 7.05 4.7 2.54 D 6 1.35 1.3 C L＋2.54 6 4.4 2.55 0.6 (Tolerance: ±0.05) Note: The overall pattern pitch tolerance for the board is ±0.05. Do not accumulate error. * The 1-mm diameter holes are for the positioning bosses. Use metal masks to prevent solder from entering these holes. 1.1 Pin1 A L+2.98 B+2.54 B+1.27 D C Dimensions Models Number of contacts XW4L-02A1-H1 2 2.54 9.77 1.27 2.22 5.16 XW4L-03A1-H1 3 5.08 12.31 2.54 3.49 6.43 XW4L-04A1-H1 4 7.62 14.85 3.81 4.76 7.70 XW4L-05A1-H1 5 10.16 17.39 5.08 6.03 8.97 XW4L-06A1-H1 6 12.70 19.93 6.35 7.30 10.24 XW4L-07A1-H1 7 15.24 22.47 7.62 8.57 11.51 XW4L-08A1-H1 8 17.78 25.01 8.89 9.84 12.78 XW4L-09A1-H1 9 20.32 27.55 10.16 11.11 14.05 XW4L-10A1-H1 10 22.86 30.09 11.43 12.38 15.32 XW4L-11A1-H1 11 25.40 32.63 12.70 13.65 16.59 XW4L-12A1-H1 12 27.94 35.17 13.97 14.92 17.86 L A B C D XW4H/XW4K/XW4L Models Direct-board-mounting, Vertical Sockets Direct-board-mounting, Horizontal Sockets Appearance Number of contacts 250 pcs per reel * 100 pcs per reel * 500 pcs per reel * 100 pcs per reel * 2 XW4L-02A1-V1 XW4L-02A1-V1-R100 XW4L-02A1-H1 XW4L-02A1-H1-R100 3 XW4L-03A1-V1 XW4L-03A1-V1-R100 XW4L-03A1-H1 XW4L-03A1-H1-R100 4 XW4L-04A1-V1 XW4L-04A1-V1-R100 XW4L-04A1-H1 XW4L-04A1-H1-R100 5 XW4L-05A1-V1 XW4L-05A1-V1-R100 XW4L-05A1-H1 XW4L-05A1-H1-R100 6 XW4L-06A1-V1 XW4L-06A1-V1-R100 XW4L-06A1-H1 XW4L-06A1-H1-R100 7 XW4L-07A1-V1 XW4L-07A1-V1-R100 XW4L-07A1-H1 XW4L-07A1-H1-R100 8 XW4L-08A1-V1 XW4L-08A1-V1-R100 XW4L-08A1-H1 XW4L-08A1-H1-R100 9 XW4L-09A1-V1 XW4L-09A1-V1-R100 XW4L-09A1-H1 XW4L-09A1-H1-R100 10 XW4L-10A1-V1 XW4L-10A1-V1-R100 XW4L-10A1-H1 XW4L-10A1-H1-R100 11 XW4L-11A1-V1 XW4L-11A1-V1-R100 XW4L-11A1-H1 XW4L-11A1-H1-R100 12 XW4L-12A1-V1 XW4L-12A1-V1-R100 XW4L-12A1-H1 XW4L-12A1-H1-R100 * Please order an integer multiple of the quantity per reel. Accessories Special Screwdriver XW4Z-00A Models Minimum ordering quantity (pieces) XW4Z-00A 1 Safety Precautions Precautions for Correct Use ● Soldering Conditions ● Metal Mask Thickness for Cream Solder Printing • Recommended Reflow Conditions Maximum temperature: 255°C Time: Within 20 s We recommend a metal mask thickness of 0.12 to 0.15 mm for cream solder printing. These conditions, however, depend on the type of solder, the manufacturer, the amount of solder, the size of the circuit board, and the other mounting materials. You must check and select the actual conditions. (°C) Peak temperature 255 Soldering temperature 240 Preheating temperature 150 ● Pin Deformation (s) Preheating time: Within 60 to 120 s Soldering time: Within 20 to 40 s These conditions depend on the type of solder, the manufacturer, the amount of solder, the size of the circuit board, and the other mounting materials. You must check and select the actual conditions yourself. The pins will deform if you subject them to an excessive load. Deformed pins will reduce solderability when the Connectors are mounted. Do not drop the Connectors or handle them roughly. Do not connect or disconnect Connectors that are not mounted to a circuit board. Doing so may deform the pins. 7 ● Terminal Block Connection Method XW4H, XW4L ● Wiring Terminal Blocks Directly Connecting Wires (1) Use wires with conductors that are within the connectible wire range. (2) Prepare the ends of the wires as shown below. Refer to Ratings and Specifications for the wire stripping length. 6±1mm (3) Do not presolder the ends of the wires. Doing so will prevent correct connections. ● Connection Methods Using Ferrules or Solid Wire Connection Method Using Crimp Terminals (1) Use ferrules or tab terminals. However, the Terminal Blocks are small, so sufficiently confirm the following before you use them. (2) Insulation between Crimp Terminals If you use naked crimp terminals, there will be no finger protection. Also, there will be limited clearance and creepage distances between adjacent terminals, so use crimp terminals with care. ● Special Screwdriver for Terminal Blocks Use the XW4Z-00A Special Screwdriver to connect the Terminal Blocks. You can also use any screwdriver with the following dimensions. If you use any screwdriver other than the Special Screwdriver or one with the following dimensions, the Terminal Block may be damaged. Removal Method (Unit: mm) Release holes A A 0.4 2 dia. Terminal insertion holes 9 Just press the ferrule all the way in. Insert the screwdriver into the release hole and pull out the ferrule. 2 Using Stranded Wires 40 Using Stranded Wires To insert a stranded wire, insert a screwdriver into the release hole and then insert the wire. To remove a stranded wire, insert a screwdriver into the release hole and then pull out the wire. Note: Do not apply excessive force to the Terminal Block when you insert the tool. The Terminal Block may be damaged. Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2015-2021 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Cat. No. G090-E1-05 1021(0515)