Y92A-96N

Watertight Cover Y92A-@@N CSM_Y92A-__N_DS_E_2_1 Ideal for Food Processing Machines or Other Applications that Require Watertightness • Four sizes (96 × 96, 72 × 72, 48 × 96, 48 × 48) are available. • Conforms to IP66 or NEMA4 (indoors). Ordering Information Model Y92A-96N Y92A-72N Y92A-49N Y92A-48N Size 96 × 96 mm 72 × 72 mm 48 × 96 mm 48 × 48 mm Applicable OMRON Products Temperature Controller Counter E5@N, E5@R, E5@K, E5@S, E5C2 H7CX, H8PS, H7BX, H8BM, H7AN, H7CN Timer Digital Panel Meter H3CR, H3CA, H5CX, H2C, H5CN, H5AN K3HB-X, K3HB-S, K3HB-V, K3HB-H, K3HB-R, K3HB-P, K3HB-C, K3TE (see note), K3TF Note: Use the K32-L49MB (sold separately) for mounting. Nomenclature Flat washer Panel Knurled screw (See note.) (48 × 48 mm) Spring washer Hexagonal nut (See note.) Panel Fixture Knurled screw (See note.) (96 × 96/72 × 72/48 × 96 mm) Note: Tighten the knurled screw to a torque of 0.02 N·m and the hexagonal nut to a torque of 0.05 N·m. 1 Y92A-@@N Dimensions Note: All units are in millimeters unless otherwise indicated. Y92A-49N (48 × 96 mm) Y92A-48N (48 × 48 mm) 21.9 Connect the Cover horizontally when using it for a Digital Panel Meter. 14 (2) 21.9 87.7 (2) 69 79.2 12 131.7 67.6 67.6 Y92A-72N (72 × 72mm) 29.4 Y92A-96N (96 × 96 mm) 21.9 21.9 (2) (2) 107.7 131.7 91.6 29.4 115.6 29.4 Panel Cutout Note: All units are in millimeters unless otherwise indicated. Y92A-48N (48 × 48 mm) Two, 4.5 dia. 69±0.3 45 +0.6 −0 dia. Square hole Materials Front cover: 94V-2 polycarbonate Packing: Chloroprene rubber Panel: SUS304 2 Y92A-@@N Safety Precautions • It is possible to open or close the front cover by untightening or tightening the knurled screw. • The Cover enables meeting water-resistance requirements for foodstuffs and other products. • Be sure to take the space required for the opening and closing of the front cover into consideration when installing the Watertight Cover. • The front cover can be mounted in any direction. • The front cover is made of polycarbonbate, which can be cleaned using water, methanol, or ethanol. • Regularly check the packing, the quality of which will deteriorate over the process of time. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 3 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: • Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. • Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. • Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: Y92A-48T Y92A-72B