1SMA40CAT3

1SMA10CAT3 Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional* http://onsemi.com The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMA series is supplied in ON Semiconductor's exclusive, cost‐effective, highly reliable Surmetict package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. Features PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 10-78 V VR 400 W PEAK POWER • • • • • • • • • Working Peak Reverse Voltage Range - 10 V to 78 V Standard Zener Breakdown Voltage Range - 11.7 V to 91.3 V Peak Power - 400 Watts @ 1 ms ESD Rating of Class 3 (> 16 kV) per Human Body Model Response Time is Typically < 1 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package Pb-Free Packages are Available SMA CASE 403D PLASTIC MARKING DIAGRAM xxC AYWWG Mechanical Characteristics: CASE: Void‐free, transfer‐molded plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds POLARITY: Cathode polarity notch does not indicate polarity MOUNTING POSITION: Any xxC A Y WW G = Device Code (Refer to page 3) = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION Device* 1SMAxxCAT3 1SMAxxCAT3G Package SMA SMA (Pb-Free) Shipping† 5000/Tape & Reel 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *The “T3” suffix refers to a 13 inch reel. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. © Semiconductor Components Industries, LLC, 2007 1 October, 2007 - Rev. 10 Publication Order Number: 1SMA10CAT3/D 1SMA10CAT3 Series MAXIMUM RATINGS Rating Peak Power Dissipation (Note 1) @ TL = 25°C, Pulse Width = 1 ms DC Power Dissipation @ TL = 75°C Measured Zero Lead Length (Note 2) Derate Above 75°C Thermal Resistance from Junction-to-Lead DC Power Dissipation (Note 3) @ TA = 25°C Derate Above 25°C Thermal Resistance from Junction-to-Ambient Operating and Storage Temperature Range Symbol PPK PD Value 400 1.5 20 50 0.5 4.0 250 -65 to +150 Unit W W mW/°C °C/W W mW/°C °C/W °C RqJL PD RqJA TJ, Tstg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. 10 X 1000 ms, non-repetitive. 2. 1 in square copper pad, FR-4 board. 3. FR-4 board, using ON Semiconductor minimum recommended footprint, as shown in 403B case outline dimensions spec. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol IPP VC VRWM IR VBR IT Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current IPP IT VC VBR VRWM IR IR VRWM VBR VC IT I IPP V Bi-Directional TVS http://onsemi.com 2 1SMA10CAT3 Series ELECTRICAL CHARACTERISTICS Breakdown Voltage IR @ VRWM mA 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 VBR (Volts) (Note 5) Min 11.1 12.2 13.3 14.4 15.6 16.7 17.8 20 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 53.3 56.7 60 64.4 66.7 71.1 77.8 86.7 Nom 11.69 12.84 14.00 15.16 16.42 17.58 18.74 21.06 23.37 25.69 28.11 30.42 32.74 35.06 38.63 42.11 46.74 50.32 56.11 59.69 63.16 67.79 70.21 74.84 81.90 91.27 Max 12.27 13.48 14.70 15.92 17.24 18.46 19.67 22.11 24.54 26.97 29.51 31.94 34.37 36.81 40.56 44.21 49.07 52.83 58.91 62.67 66.32 71.18 73.72 78.58 85.99 95.83 @ IT mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 VC @ IPP (Note 6) VC Volts 17.0 18.2 19.9 21.5 23.2 24.4 26.0 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 77.4 82.4 87.1 93.6 96.8 103 113 126 IPP Amps 23.5 22.0 20.1 18.6 17.2 16.4 15.4 13.7 12.3 11.3 10.3 9.5 8.8 8.3 7.5 6.9 6.2 5.8 5.2 4.9 4.6 4.3 4.1 3.9 3.5 3.2 Device* 1SMA10CAT3, G 1SMA11CAT3, G 1SMA12CAT3, G 1SMA13CAT3, G 1SMA14CAT3, G 1SMA15CAT3, G 1SMA16CAT3, G 1SMA18CAT3, G 1SMA20CAT3, G 1SMA22CAT3, G 1SMA24CAT3, G 1SMA26CAT3, G 1SMA28CAT3, G 1SMA30CAT3, G 1SMA33CAT3, G 1SMA36CAT3, G 1SMA40CAT3, G 1SMA43CAT3, G 1SMA48CAT3, G 1SMA51CAT3, G 1SMA54CAT3, G 1SMA58CAT3, G 1SMA60CAT3, G 1SMA64CAT3, G 1SMA70CAT3, G 1SMA78CAT3, G Device Marking QXC QZC REC RGC RKC RMC RPC RTC RVC RXC RZC SEC SGC SKC SMC SPC SRC STC SXC SZC TEC TGC TKC TMC TPC TTC VRWM (Note 4) Volts 10 11 12 13 14 15 16 18 20 22 24 26 28 30 33 36 40 43 48 51 54 58 60 64 70 78 C Typ. (Note 7) pF 580 530 490 455 425 400 375 335 305 280 260 240 225 210 190 175 160 150 135 130 120 115 110 105 95 90 4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 5. VBR measured at pulse test current IT at an ambient temperature of 25°C 6. Surge current waveform per Figure 2 and derate per Figure 3 7. Bias voltage = 0 V, F = 1.0 MHz, TJ = 25°C. †Please see 1SMA5.0AT3 to 1SMA78AT3 for Unidirectional devices. * The “G” suffix indicates Pb-Free package available. http://onsemi.com 3 1SMA10CAT3 Series RATING AND TYPICAL CHARACTERISTIC CURVES 100 Ippm, PEAK PULSE CURRENT (%) NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2. TA = 25°C 120 = 10 ms 100 80 60 40 20 0 0.001 0.01 0.1 tP, PULSE WIDTH (ms) 1 10 PEAK VALUE Ippm Ppk , PEAK POWER (kW) TA = 25°C PW (ID) IS DEFINED AS THE POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF Ipp. 10 HALF VALUE - Ipp/2 10/1000 ms WAVEFORM AS DEFINED BY R.E.A. td 0 1 2 t, TIME (ms) 3 4 5 1 0.1 10-4 Figure 1. Pulse Rating Curve Figure 2. Pulse Waveform 120 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 80 60 40 20 0 10 x 1000 WAVEFORM AS DEFINED BY R.E.A. C, CAPACITANCE (pF) 1,000 1SMA10CAT3G 1SMA18CAT3G 100 TJ = 25°C F = 1 MHz 1SMA48CAT3G 1SMA78CAT3G 10 1 0 40 80 120 160 TA, AMBIENT TEMPERATURE (°C) 200 1 10 BIAS VOLTAGE (VOLTS) 100 Figure 3. Pulse Derating Curve Figure 4. Typical Junction Capacitance vs. Bias Voltage http://onsemi.com 4 1SMA10CAT3 Series PACKAGE DIMENSIONS SMA CASE 403D-02 ISSUE D HE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 403D-01 OBSOLETE, NEW STANDARD IS 403D-02. DIM A A1 b c D E HE L MIN 1.92 0.05 1.27 0.15 2.29 4.06 4.83 0.76 MILLIMETERS NOM MAX 2.17 2.27 0.10 0.15 1.45 1.63 0.28 0.41 2.60 2.92 4.32 4.57 5.21 5.59 1.14 1.52 MIN 0.076 0.002 0.050 0.006 0.090 0.160 0.190 0.030 INCHES NOM 0.085 0.004 0.057 0.011 0.103 0.170 0.205 0.045 MAX 0.089 0.006 0.064 0.016 0.115 0.180 0.220 0.060 b D POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) A L c A1 SOLDERING FOOTPRINT* 4.0 0.157 2.0 0.0787 2.0 0.0787 SCALE 8:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SURMETIC is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT:  Literature Distribution Center for ON Semiconductor  P.O. Box 5163, Denver, Colorado 80217 USA  Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada  Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada  Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free  USA/Canada Europe, Middle East and Africa Technical Support:  Phone: 421 33 790 2910 Japan Customer Focus Center  Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 5 1SMA10CAT3/D