2SA2210-1E

Ordering number : ENA0667B 2SA2210 Bipolar Transistor http://onsemi.com –50V, –20A, Low VCE(sat) PNP TO-220F-3SG Applications • Relay drivers, lamp drivers, motor drivers. Features • • Adoption of MBIT processes Low collector-to-emitter saturation voltage • • Large current capacitance High-speed switching Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Tc=25°C --50 V --50 V --6 V --20 A --25 A --3 A 2 W 30 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7529-002 • Package : TO-220F-3SG • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50 pcs./magazine 4.7 10.16 3.18 6.68 3.3 Marking Electrical Connection 15.87 2 A 3.23 15.8 2SA2210-1E 2.54 1 A2210 2.76 DETAIL-A 0.8 1 2 3 LOT No. 3 12.98 1.47 MAX (0.84) 0.5 FRAME 2.54 2.54 Semiconductor Components Industries, LLC, 2013 September, 2013 ( 1.0) EMC 1 : Base 2 : Collector 3 : Emitter TO-220F-3SG 60612 TKIM/21512 TKIM TC-00002708/30707FA TI IM TC-00000565 No. A0667-1/7 2SA2210 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product fT Cob Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO Conditions Ratings min typ VCB= --40V, IE=0A VEB= --4V, IC=0A VCE= --2V, IC= --1A VCE= --10V, IC= --1A Unit max 150 --10 μA --10 μA 450 140 VCB= --10V, f=1MHz IC= --7A, IB= --350mA MHz 215 --200 IC= --7A, IB= --350mA IC= --100μA, IE=0A IC= --1mA, RBE=∞ pF --500 --1.2 V(BR)EBO ton IE= --100μA, IC=0A tstg tf See specified Test Circuit mV V --50 V --50 V --6 V 60 ns 270 ns 20 ns Switching Time Test Circuit PW=20μs D.C.≤1% IB1 IB2 OUTPUT INPUT VR RB + 50Ω 100μF VBE=5V RL + 470μF VCC= --20V IC=20IB1= --20IB2= --7A Ordering Information Device 2SA2210-1E Package Shipping memo TO-220F-3SG 50pcs./magazine Pb Free No. A0667-2/7 2SA2210 IC -- VCE --70 A mA --10 --8 0 --40 mA --100mA 0 00m --9 A 00m --12 Collector Current, IC -- A --14 --9 --200m A --80 0m A --16 --50 mA 0 0 --6 --6 --8 --7 --6 0 --10 --60mA --40mA --120mA --160mA 40mA --1 --20mA --180mA --5 --4 --3 --2 --4 --1 --2 IB=0mA 0 0 --0.5 --1.0 --1.5 0 --0.2 --0.4 --0.6 --0.8 --1.0 Collector-to-Emitter Voltage, VCE -- V IT12019 IC -- VBE --30 IB=0mA 0 --2.0 Collector-to-Emitter Voltage, VCE -- V IT12020 hFE -- IC 1000 VCE= --2V VCE= --2V 7 5 DC Current Gain, hFE --25 --20 --15 25° C 75 °C --10 Ta=75°C 25°C 3 2 --25°C 100 7 5 3 2 --25 --5 °C Ta = Collector Current, IC -- A mA A --80m --50 0mA --4 00m --30 0mA A --20 0mA 0m mA 0 --30 --10 Collector Current, IC -- A --18 IC -- VCE --10 A --20 0 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE -- V 2 -2. =E VC 0V 5V --0. .2V --0 --1.0V --0.7V DC Current Gain, hFE 3 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector Current, IC -- A 3 2 100 7 5 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 3 2 100 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --0.1 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT12025 2 3 5 7 --1.0 2 3 5 7 --10 IT12024 VCE(sat) -- IC IC / IB=20 5 3 2 --0.1 7 5 3 2 --0.01 7 5 IT12022 VCE= --10V --1.0 7 2 3 Collector Current, IC -- A f=1MHz 2 5 7 --10 5 IT12023 1000 5 --0.1 2 3 fT -- IC 10 --0.01 5 Cob -- VCB 2 5 7 --1.0 7 5 10 --0.01 2 3 2 3 Collector Current, IC -- A Ta=25°C 7 5 7 --0.1 1000 7 100 3 IT12021 hFE -- IC 1000 Output Capacitance, Cob -- pF 10 --0.01 2 --1.4 5° C --2 5° C --0.6 25 °C --0.4 Ta =7 --0.2 Gain-Bandwidth Product, fT -- MHz 0 C Ta= --25° 75°C 25°C 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 2 3 IT12026 No. A0667-3/7 2SA2210 VCE(sat) -- IC IC / IB=20 IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 --1.0 7 5 3 2 °C 75 = Ta --0.1 7 5 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A 2 10 0m s 1m s m on ati er op 3 2 10 DC s S --1.0 7 5 /B it m Li 3 2 --0.1 7 5 3 2 Tc=25°C Single pulse --0.01 --0.1 75°C 5 25°C 3 2 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A 2 3 5 IT12028 PC -- Ta 2.5 μs 00 =5 PT IC= --20A --10 7 5 Ta= --25°C 7 IT12027 ICP= --25A 3 2 --1.0 2 --0.01 3 Forward Bias A S O 5 2 75°C 25°C --0.01 --0.01 C 5° --2 5°C 2 Ta= --25°C 3 2 Collector Current, IC -- A VBE(sat) -- IC 3 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2.0 1.5 1.0 0.5 0 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Emitter Voltage, VCE -- V 5 7 IT12029 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT12030 PC -- Tc 35 Collector Dissipation, PC -- W 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT12031 No. A0667-4/7 2SA2210 Magazine Specification 2SA2210-1E No. A0667-5/7 2SA2210 Outline Drawing 2SA2210-1E Mass (g) Unit 1.8 mm * For reference No. A0667-6/7 2SA2210 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A0667-7/7