2SA2210-EPN-1E

2SA2210 Ordering number : ENA0667B SANYO Semiconductors DATA SHEET PNP Epitaxial Planar Silicon Transistor 2SA2210 High-Current Switching Applications Applications • Relay drivers, lamp drivers, motor drivers. Features • • Adoption of MBIT processes Low collector-to-emitter saturation voltage • • Large current capacitance High-speed switching Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Tc=25°C --50 V --50 V --6 V --20 A --25 A --3 A 2 W 30 W 150 °C --55 to +150 °C Package Dimensions Product & Package Information unit : mm (typ) 7529-002 • Package : TO-220F-3SG • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50 pcs./magazine 4.7 10.16 3.18 6.68 3.3 Marking Electrical Connection 15.87 2 A 3.23 1 A2210 2.76 1.47 MAX DETAIL-A 0.8 1 2 3 LOT No. 3 12.98 (0.84) 0.5 FRAME EMC 2.54 2.54 ( 1.0) 15.8 2SA2210-1E 2.54 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220F-3SG http://semicon.sanyo.com/en/network 60612 TKIM/21512 TKIM TC-00002708/30707FA TI IM TC-00000565 No. A0667-1/7 2SA2210 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product fT Cob Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO Conditions Ratings min typ VCB= --40V, IE=0A VEB= --4V, IC=0A VCE= --2V, IC= --1A VCE= --10V, IC= --1A Unit max 150 --10 μA --10 μA 450 140 VCB= --10V, f=1MHz IC= --7A, IB= --350mA MHz 215 --200 IC= --7A, IB= --350mA IC= --100μA, IE=0A IC= --1mA, RBE=∞ pF --500 --1.2 V(BR)EBO ton IE= --100μA, IC=0A tstg tf See specified Test Circuit mV V --50 V --50 V --6 V 60 ns 270 ns 20 ns Switching Time Test Circuit PW=20μs D.C.≤1% IB1 IB2 OUTPUT INPUT VR RB + 50Ω 100μF VBE=5V RL + 470μF VCC= --20V IC=20IB1= --20IB2= --7A Ordering Information Device 2SA2210-1E Package Shipping memo TO-220F-3SG 50pcs./magazine Pb Free No. A0667-2/7 2SA2210 IC -- VCE --70 A mA --10 --8 0 --40 mA --100mA 0 00m --9 A 00m --12 Collector Current, IC -- A --14 --9 --200m A --80 0m A --16 --50 mA 0 0 --6 --6 --8 --7 --6 0 --10 --60mA --40mA --120mA --160mA 40mA --1 --20mA --180mA --5 --4 --3 --2 --4 --1 --2 IB=0mA 0 0 --0.5 --1.0 --1.5 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V IT12019 IC -- VBE --30 IB=0mA 0 --2.0 Collector-to-Emitter Voltage, VCE -- V --1.0 IT12020 hFE -- IC 1000 VCE= --2V VCE= --2V 7 5 DC Current Gain, hFE --25 --20 --15 25° C 75 °C --10 Ta=75°C 25°C 3 2 --25°C 100 7 5 3 2 --25 --5 °C Ta = Collector Current, IC -- A mA A --80m --50 0mA --4 00m --30 0mA A --20 0mA 0m mA 0 --30 --10 Collector Current, IC -- A --18 IC -- VCE --10 A --20 0 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE -- V 2 -2. =E VC 0V 5V --0. .2V --0 --1.0V --0.7V DC Current Gain, hFE 3 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector Current, IC -- A 3 2 100 7 5 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 3 2 100 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --0.1 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT12025 2 3 5 7 --1.0 2 3 5 7 --10 IT12024 VCE(sat) -- IC IC / IB=20 5 3 2 --0.1 7 5 3 2 --0.01 7 5 VCE= --10V --1.0 7 2 3 IT12022 Collector Current, IC -- A f=1MHz 2 5 7 --10 5 IT12023 1000 5 --0.1 2 3 fT -- IC 10 --0.01 5 Cob -- VCB 2 5 7 --1.0 7 5 10 --0.01 2 3 2 3 Collector Current, IC -- A Ta=25°C 7 5 7 --0.1 1000 7 100 3 IT12021 hFE -- IC 1000 Output Capacitance, Cob -- pF 10 --0.01 2 --1.4 5° C --2 5° C --0.6 25 °C --0.4 Ta =7 --0.2 Gain-Bandwidth Product, fT -- MHz 0 C Ta= --25° 75°C 25°C 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 5 7 --10 2 3 IT12026 No. A0667-3/7 2SA2210 VCE(sat) -- IC IC / IB=20 IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 --1.0 7 5 3 2 °C 75 = Ta --0.1 7 5 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A 2 10 0m s 1m s m on ati er op 3 2 10 DC s S --1.0 7 5 /B it m Li 3 2 --0.1 7 5 3 2 Tc=25°C Single pulse --0.01 --0.1 75°C 5 25°C 3 2 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A 2 3 5 IT12028 PC -- Ta 2.5 μs 00 =5 PT IC= --20A --10 7 5 Ta= --25°C 7 IT12027 ICP= --25A 3 2 --1.0 2 --0.01 3 Forward Bias A S O 5 2 75°C 25°C --0.01 --0.01 C 5° --2 5°C 2 Ta= --25°C 3 2 Collector Current, IC -- A VBE(sat) -- IC 3 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 3 2.0 1.5 1.0 0.5 0 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Emitter Voltage, VCE -- V 5 7 IT12029 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT12030 PC -- Tc 35 Collector Dissipation, PC -- W 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT12031 No. A0667-4/7 2SA2210 Magazine Specification 2SA2210-1E No. A0667-5/7 2SA2210 Outline Drawing 2SA2210-1E Mass (g) Unit 1.8 mm * For reference No. A0667-6/7 2SA2210 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A0667-7/7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: 2SA2210-EPN-1EX 2SA2210-EPN-1E