2SA2222SG

Ordering number : ENA1799B 2SA2222SG Bipolar Transistor –50V, –10A, Low VCE(sat) PNP TO-220F-3FS http://onsemi.com Applications • Relay drivers, lamp drivers, motor drivers Features • • • • Large current capacity (IC=--10A) Adoption of MBIT process Low collector-to-emitter saturation voltage (VCE(sat)=--250mV(typ.)) High-speed switching (tf=22ns(typ.)) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Collector Current Unit --50 V --50 V --6 V --10 A --13 A --2 A Tc=25°C, PT≤1s 25 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7528-003 • Package : TO-220F-3FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50 pcs./magazine 4.7 10.16 3.18 2SA2222SG Marking Electrical Connection 6.68 3.3 2.54 1 3.23 15.8 15.87 2 A2222 SG LOT No. 3 12.98 2.76 1.47 MAX 0.8 1 2.54 2 3 0.5 2.54 Semiconductor Components Industries, LLC, 2013 September, 2013 1 : Base 2 : Collector 3 : Emitter TO-220F-3FS D2612 TKIM TC-00002860/82212 TKIM/72110FA TKIM TC-00002380 No. A1799-1/7 2SA2222SG Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Conditions ICBO IEBO VCB=--40V, IE=0A VEB=--4V, IC=0A Gain-Bandwidth Product hFE fT VCE=--2V, IC=--270mA VCE=--10V, IC=--1A Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=--10V, f=1MHz IC=--6A, IB=--300mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings min typ Unit max 150 --10 μA --10 μA 450 230 MHz 115 --250 IC=--6A, IB=--300mA pF --500 --1.2 mV V V(BR)CBO V(BR)CEO IC=--100μA, IE=0A IC=--1mA, RBE=∞ --50 V --50 V V(BR)EBO ton IE=--100μA, IC=0A --6 tstg tf See specified Test Circuit. V 40 ns 240 ns 22 ns Switching Time Test Circuit PW=20μs D.C.≤1% IB1 IB2 OUTPUT INPUT VR RB + 50Ω 100μF VBE=5V RL + 470μF VCC= --20V IC=20IB1= --20IB2= --5A Ordering Information Device 2SA2222SG Package Shipping memo TO-220F-3FS 50pcs./magazine Pb Free No. A1799-2/7 2SA2222SG --40mA --90mA --6 --30mA --100mA mA --200 --5 --4.5 --20mA --4 --3 --10mA --2 IB=0mA 0 --1 --2 --3 --4 --20mA A --45m --2.5 --15mA --50mA 0mA --6 --2.0 --1.5 --10mA A --80m --5mA --1.0 IB=0mA 0 --0.5 --1.0 --1.5 --2.0 Collector-to-Emitter Voltage, VCE -- V hFE -- IC 1000 VCE= --2V IT13442 VCE= --2V 7 5 Ta=75°C 3 25°C 2 --25°C DC Current Gain, hFE --20 --15 75° C C --25°C --10 --5 100 7 5 3 2 25° --0.5 0 --1.0 --1.5 Base-to-Emitter Voltage, VBE -- V 2 3 5 7--1.0 2 3 5 7 --10 Collector Current, IC -- A V V --0.7V 7 --0.5 V --0.2 100 5 --1.0 3 V 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7--1.0 2 3 5 7 --10 2 3 Collector Current, IC -- A 100 7 5 2 3 5 7 --10 3 2 2 3 5 7 --0.1 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT13447 2 3 5 7 --1.0 2 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 7 --1.0 5 2 3 5 7 VCE(sat) -- IC 3 5 3 100 10 --0.01 5 f=1MHz 2 2 IT13445 Cob -- VCB 7 3 3 5 7 --10 IT13446 IC / IB=20 --1.0 7 5 3 2 --0.1 7 5 C 5° =7 Ta C 5° --2 3 2 --0.01 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 25 °C 2.0 = -V CE 2 5 VCE= --10V Ta=25°C 3 2 3 IT13444 fT -- IC 5 5 3 --0.1 5 7--0.1 IT13443 hFE -- IC 7 10 --0.01 2 3 --2.0 Gain-Bandwidth Product, fT -- MHz 0 Ta= Collector Current, IC -- A A IT13441 IC -- VBE --25 DC Current Gain, hFE --25mA --40m --3.0 0 --5 Collector-to-Emitter Voltage, VCE -- V Output Capacitance, Cob -- pF --3.5 A --30mA --35m --0.5 --1 0 --4.0 --7 0m A --1 5 0m A 0m A --70mA --60mA --50mA --100m --90mA A --7 IC -- VCE --5.0 A --80m Collector Current, IC -- A --8 --3 0 --500mA--400 m --9 Collector Current, IC -- A IC -- VCE A --10 2 3 Collector Current, IC -- A 5 7 --10 2 3 IT13448 No. A1799-3/7 2SA2222SG VCE(sat) -- IC 5 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 --1.0 7 5 3 2 --0.1 C 75° 7 5 C 5° --2 Ta= °C 25 3 2 --0.01 --0.01 2 3 5 7--0.1 2 3 5 7--1.0 2 3 5 7 --10 Collector Current, IC -- A 3 2 --10 --1.0 Ta= --25°C 7 25°C 75°C 5 3 2 --0.01 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- A IT13449 PC -- Tc 30 10 0m s 10 DC --1.0 op 7 5 μs 00 =5 PT ms IC= --10A 3 2 era n tio 3 2 --0.1 7 5 3 2 2 2 3 IT13450 ICP= --13A s 1m 7 5 2 Forward Bias A S O 1s Collector Current, IC -- A IC / IB=20 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 3 VBE(sat) -- IC 3 IC / IB=50 Tc=25°C Single pulse --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Emitter Voltage, VCE -- V 5 7 --100 IT15773 25 20 P T≤ 15 1s 10 5 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT15774 No. A1799-4/7 2SA2222SG Magazine Specification 2SA2222SG No. A1799-5/7 2SA2222SG Outline Drawing 2SA2222SG Mass (g) Unit 1.8 mm * For reference No. A1799-6/7 2SA2222SG ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1799-7/7