2SB1205T-TL-E

Ordering number : EN2114C 2SB1205 Bipolar Transistor http://onsemi.com –20V, –5A, Low VCE(sat), PNP Single TP/TP-FA Applications • Flash, voltage regulators, relay drivers, lamp drivers Features • • • • Low saturation voltage Adoption of FBET, MBIT processes • Large current capacity Fast switching speed Small and slim package making it easy to make 2SB1205-applied sets smaller Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage VEBO IC ICP Collector Current Collector Current (Pulse) Unit --25 V --20 V --5 V --5 A --8 A Continued on next page. Package Dimensions unit : mm (typ) Package Dimensions unit : mm (typ) 7518-003 7003-003 0.5 1.5 0.5 1 2 2.3 7.5 0.8 1.6 0.6 3 2.3 0.5 0.6 1 : Base 2 : Collector 3 : Emitter 4 : Collector 1 2 2.5 1.2 0.8 0.85 0.85 0.7 3 0 to 0.2 1.2 2.3 2SB1205S-TL-E 2SB1205T-TL-E 1.2 4 5.5 5.5 4 2.3 6.5 5.0 2SB1205S-E 2SB1205T-E 7.0 1.5 0.5 7.0 2.3 6.5 5.0 2.3 1 : Base 2 : Collector 3 : Emitter 4 : Collector TP-FA TP Product & Package Information • Package : TP • JEITA, JEDEC : SC-64, TO-251 • Minimum Packing Quantity : 500 pcs./bag Marking (TP, TP-FA) • Package : TP-FA • JEITA, JEDEC : SC-63, TO-252 • Minimum Packing Quantity : 700 pcs./reel Packing Type (TP-FA) : TL Electrical Connection 2,4 B1205 RANK LOT No. 1 TL 3 Semiconductor Components Industries, LLC, 2013 September, 2013 D0512 TKIM TC-00002845/N2503TN (KT)/92098HA (KT)/8219MO/4137KI/4116KI, TS No.2114-1/9 2SB1205 Continued from preceding page. Parameter Symbol Base Current Conditions Ratings IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C Unit --0.5 A 1 W 10 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Conditions ICBO IEBO hFE1 VCE=--2V, IC=500mA Gain-Bandwidth Product hFE2 fT VCE=--2V, IC=--4A VCE=--5V, IC=--200mA Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=--10V, f=1MHz IC=--3A, IB=--60mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time V(BR)CBO V(BR)CEO Ratings min typ max Unit VCB=--20V, IE=0A --500 nA VEB=--4V, IC=0A --500 nA 100* 400* 60 320 MHz 60 pF --250 --500 --1.0 --1.3 mV IC=--3A, IB=--60mA IC=--10μA, IE=0A --25 V V IC=--1mA, RBE=∞ --20 V(BR)EBO ton IE=--10μA, IC=0A --5 tstg tf See specified Test Circuit. V V 40 ns 200 ns 10 ns * : The 2SB1205 is classified by 500mA hFE as follows : Rank R S T hFE 100 to 200 140 to 280 200 to 400 Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 VR RB RL 50Ω + 100μF VBE=5V + 470μF VCC= --10V IC=10IB1= --10IB2= --2A Ordering Information Device 2SB1205S-E 2SB1205T-E Package Shipping TP 500pcs./bag TP 500pcs./bag 2SB1205S-TL-E TP-FA 700pcs./reel 2SB1205T-TL-E TP-FA 700pcs./reel memo Pb Free No.2114-2/9 2SB1205 IC -- VCE From top --100mA --90mA --80mA --70mA Collector Current, IC -- A --4 --60 mA -- --40mA --30mA --3 --20mA --2 --10mA --25mA --20mA --3 --15mA --10mA --2 IB=0 0 --0.2 --0.4 --0.6 --5mA --1.0 0 --1 --2 --3 --4 --5 Collector-to-Emitter Voltage, VCE -- V ITR09216 IC -- VBE --6 IB=0 0 --0.8 Collector-to-Emitter Voltage, VCE -- V ITR09217 hFE -- IC 1000 VCE= --2V VCE= --2V 7 --5 5 DC Current Gain, hFE Collector Current, IC -- A --35mA --30mA --1 0 --4 --3 Ta= 75 25° °C C --25 °C --2 --1 Ta=75°C 25°C --25°C 3 2 100 7 5 3 2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 5 2 --0.01 3 5 --0.1 2 3 5 2 --1.0 5 --10 ITR09219 Cob -- VCB 3 VCE= --5V 7 3 Collector Current, IC -- A ITR09218 f T -- IC 1000 f=1MHz 2 5 Output Capacitance, Cob -- pF Gain-Brandwidth Product, f T -- MHz 40mA --4 --1 3 2 100 7 5 100 7 5 3 2 3 10 2 5 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 3 3 2 --100 7 25°C Ta= --25°C 3 75°C 2 --1.0 2 3 5 7 2 --10 3 ITR09221 VBE(sat) -- IC --10 IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 5 5 7 Collector-to-Base Voltage, VCB -- V IC / IB=50 7 5 ITR09220 VCE(sat) -- IC --1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV IC -- VCE --5 --50mA Collector Current, IC -- A --5 7 5 3 2 --1.0 Ta= --25°C 25°C 7 75°C 5 3 --10 5 --0.01 2 3 5 --0.1 2 3 5 --1.0 Collector Current, IC -- A 2 3 5 --10 ITR09222 5 --0.01 2 3 5 --0.1 2 3 5 --1.0 Collector Current, IC -- A 2 3 5 --10 ITR09223 No.2114-3/9 2SB1205 ASO DC 2 10 m s s tio n( Ta = C) 5° =2 Tc n( tio era op op era --1.0 0m s 3 10 1m 5 ICP= --8A IC= --5A DC Collector Current, IC -- A --10 25 °C 5 ) 3 2 --0.1 5 Tc=25°C Single pulse 3 --0.1 2 3 PC -- Ta 12 Collector Dissipation, PC -- W 2 10 8 6 4 2 No heat sink 1 0 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 3 5 ITR09224 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 ITR09225 No.2114-4/9 2SB1205 Taping Specification 2SB1205S-TL-E, 2SB1205T-TL-E No.2114-5/9 2SB1205 Outline Drawing 2SB1205S-TL-E, 2SB1205T-TL-E Land Pattern Example Mass (g) Unit 0.282 mm * For reference Unit: mm 7.0 7.0 2.5 2.0 1.5 2.3 2.3 No.2114-6/9 2SB1205 Bag Packing Specification 2SB1205S-E, 2SB1205T-E No.2114-7/9 2SB1205 Outline Drawing 2SB1205S-E, 2SB1205T-E Mass (g) Unit 0.315 mm * For reference No.2114-8/9 2SB1205 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.2114-9/9