2SC4081RT1G

2SC4081RT1 General Purpose Amplifier Transistor NPN Surface Mount Features http://onsemi.com • Moisture Sensitivity Level: 1 • Pb−Free Package is Available MAXIMUM RATINGS (TA = 25°C) Rating Collector−Base Voltage Collector−Emitter Voltage Emitter−Base Voltage Collector Current − Continuous Collector Current − Peak Symbol V(BR)CBO V(BR)CEO V(BR)EBO IC IC(P) Value 60 50 7.0 100 200 Unit Vdc Vdc Vdc mAdc mAdc 1 BASE COLLECTOR 3 2 EMITTER 3 SC−70 CASE 419 1 2 THERMAL CHARACTERISTICS Characteristic Power Dissipation Junction Temperature Storage Temperature Symbol PD TJ Tstg Max 200 150 −55 to +150 Unit mW °C °C MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Collector−Emitter Breakdown Voltage (IC = 2.0 mAdc, IB = 0) Collector−Base Breakdown Voltage (IC = 10 mAdc, IE = 0) Emitter−Base Breakdown Voltage (IE = 10 mAdc, IC = 0) Collector−Base Cutoff Current (VCB = 60 Vdc, IE = 0) Collector−Emitter Cutoff Current (VCE = 10 Vdc, IB = 0) (VCE = 30 Vdc, IB = 0) (VCE = 30 Vdc, IB = 0, TA = 80°C) DC Current Gain (Note 1) (VCE = 6.0 Vdc, IC = 2.0 mAdc) Collector−Emitter Saturation Voltage (IC = 100 mAdc, IB = 10 mAdc) Symbol V(BR)CEO V(BR)CBO V(BR)EBO ICBO ICEO − − − hFE 180 VCE(sat) − 390 0.5 Vdc 0.1 2.0 1.0 Min 50 60 7.0 − Max − − − 0.1 Unit Vdc Vdc Vdc mAdc 1 81 M G G 81 = Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION mAdc mAdc mAdc − Device* 2SC4081RT1 2SC4081RT1G Package SC−70 SC−70 (Pb−Free) Shipping† 3000/Tape & Reel 3000/Tape & Reel 1. Pulse Test: Pulse Width ≤ 300 ms, D.C. ≤ 2%. *The “T1” suffix refers to a 7 inch reel. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2006 1 May, 2006 − Rev. 4 Publication Order Number: 2SC4081RT1/D 2SC4081RT1 PACKAGE DIMENSIONS SC−70 (SOT−323) CASE 419−04 ISSUE M D e1 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. MILLIMETERS NOM MAX 0.90 1.00 0.05 0.10 0.7 REF 0.35 0.40 0.18 0.25 2.10 2.20 1.24 1.35 1.30 1.40 0.65 BSC 0.425 REF 2.10 2.40 INCHES NOM 0.035 0.002 0.028 REF 0.014 0.007 0.083 0.049 0.051 0.026 BSC 0.017 REF 0.083 HE 1 2 E b e DIM A A1 A2 b c D E e e1 L HE MIN 0.80 0.00 0.30 0.10 1.80 1.15 1.20 MIN 0.032 0.000 0.012 0.004 0.071 0.045 0.047 MAX 0.040 0.004 0.016 0.010 0.087 0.053 0.055 2.00 0.079 0.095 A 0.05 (0.002) A2 L c A1 SOLDERING FOOTPRINT* 0.65 0.025 0.65 0.025 1.9 0.075 0.9 0.035 0.7 0.028 SCALE 10:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 2 2SC4081RT1/D