2SC5994
Bipolar Transistor
50V, 2A, Low VCE(sat), NPN Single
www.onsemi.com
Features
• Adoption of MBIT Process
• Low Collector to Emitter Saturation Voltage
• Large Current Capacity
• High Speed Switching
ELECTRICAL CONNECTION
2
Typical Applications
• Voltage Regulators
• Relay Drivers
• Lamp Drivers
• Electrical Equipment
1 : Base
2 : Collector
3 : Emitter
1
3
MARKING
Unit
100
V
100
V
Collector to Emitter Voltage
50
V
Emitter to Base Voltage
6
V
Collector Current
2
A
Collector Current (Pulse)
4
A
Base Current
400
mA
(Note 2)
1.3
W
Collector Dissipation
PC
Tc=25°C
3.5
W
Junction Temperature
Tj
150
°C
Storage Temperature
Tstg
−55 to +150
°C
Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage
the device. If any of these limits are exceeded, device functionality should not
be assumed, damage may occur and reliability may be affected.
2
Note 2 : Surface mounted on ceramic substrate(450mm × 0.8mm)
© Semiconductor Components Industries, LLC, 2016
April 2016 - Rev. 2
Symbol
VCBO
VCES
VCEO
VEBO
IC
ICP
IB
Value
1
1
2
FJ
Parameter
Collector to Base Voltage
LOT No.
SPECIFICATIONS
ABSOLUTE MAXIMUM RATING at Ta = 25°C (Note 1, 2)
3
SOT-89 / PCP-1
1
2
3
ORDERING INFORMATION
See detailed ordering and shipping
information on page 5 of this data sheet.
Publication Order Number :
2SC5994/D
2SC5994
ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 3)
Parameter
Symbol
Conditions
Value
min
typ
Unit
max
Collector Cutoff Current
ICBO
VCB=50V, IE=0A
1
μA
Emitter Cutoff Current
IEBO
VEB=4V, IC=0A
1
μA
DC Current Gain
hFE1
hFE2
VCE=2V, IC=100mA
VCE=2V,IC=1.5A
Gain-Bandwidth Product
fT
Cob
VCE=10V, IC=300mA
VCB=10V, f=1MHz
420
Output Capacitance
Collector to Emitter Saturation
Voltage
VCE(sat)
IC=1A, IB=50mA
135
300
mV
Base to Emitter Saturation Voltage
VBE(sat)
IC=1A, IB=50mA
0.9
1.2
V
Collector to Base Breakdown
Voltage
V(BR)CBO
IC=10μA, IE=0A
100
V
V(BR)CES
IC=100μA, RBE=0Ω
100
V
V(BR)CEO
V(BR)EBO
IC=1mA, RBE=∞
IE=10μA, IC=0A
Collector to Emitter Breakdown
Voltage
Emitter to Base Breakdown Voltage
Turn-On Time
Storage Time
ton
tstg
See specified Test
Circuit
200
560
40
MHz
9
pF
50
V
6
V
30
ns
330
ns
Fall Time
40
tf
ns
Note 3 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
Switching Time Test Circuit
www.onsemi.com
2
2SC5994
www.onsemi.com
3
2SC5994
www.onsemi.com
4
2SC5994
PACKAGE DIMENSIONS
unit : mm
SOT-89 / PCP-1
CASE 419AU
ISSUE O
1 : Base
2 : Collector
3 : Emitter
Recommended
Soldering Footprint
0.9
2.2
3.7
45°
45°
1.0
1.8
1.5
1.0
1.5
3.0
ORDERING INFORMATION
Device
2SC5994-TD-E
Marking
Package
Shipping (Qty / Packing)
FJ
SOT-89 / PCP-1
(Pb-Free)
1,000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
5
