2SD1805G-TL-E

Ordering number : EN2115C 2SD1805 Bipolar Transistor http://onsemi.com 20V, 5A, Low VCE(sat), NPN Single TP/TP-FA Applications • Strobes, voltage regulators, relay drivers, lamp drivers Features • • Low saturation voltage Large current capacity Fast switching time Small and slim package making it easy to make 2SD1805-applied sets smaller • • Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCEO Collector-to-Emitter Voltage Emitter-to-Base Voltage VEBO IC ICP Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C Unit 60 V 20 V 6 V 5 A 8 A 1 W 15 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) Package Dimensions unit : mm (typ) 7518-003 7003-003 0.5 1.5 5.5 0.5 1 2 2.3 7.5 0.8 1.6 0.6 0.5 3 2.3 0.6 1 : Base 2 : Collector 3 : Emitter 4 : Collector 1 2 2.5 1.2 0.8 0.85 0.85 0.7 3 0 to 0.2 1.2 2.3 2SD1805F-TL-E 2SD1805G-TL-E 1.2 1.5 4 7.0 5.5 4 2.3 6.5 5.0 2SD1805F-E 2SD1805G-E 0.5 7.0 2.3 6.5 5.0 2.3 1 : Base 2 : Collector 3 : Emitter 4 : Collector TP-FA TP Product & Package Information • Package : TP • JEITA, JEDEC : SC-64, TO-251 • Minimum Packing Quantity : 500 pcs./bag Marking (TP, TP-FA) • Package : TP-FA • JEITA, JEDEC : SC-63, TO-252 • Minimum Packing Quantity : 700 pcs./reel Packing Type (TP-FA) : TL Electrical Connection 2,4 D1805 1 RANK LOT No. TL Semiconductor Components Industries, LLC, 2013 September, 2013 3 60612 TKIM TA-4167/22599TH (KT)/8309MO/5277KI/O236KI, TS No.2115-1/9 2SD1805 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings min typ max ICBO IEBO VCB=50V, IE=0A VEB=5V, IC=0A hFE1 VCE=2V, IC=500mA hFE2 VCE=2V, IC=3A fT Cob VCE=10V, IC=50mA 120 VCB=10V, f=1MHz IC=3A, IB=60mA 45 VCE(sat) VBE(sat) Base-to-Emitter Saturation Voltage Conditions 120* Unit 100 nA 100 nA 560* 95 220 IC=3A, IB=60mA MHz pF 500 mV 1.5 V V(BR)CBO V(BR)CEO IC=10μA, IE=0A 60 V IC=1mA, RBE=∞ 20 V V(BR)EBO ton IE=10μA, IC=0A 6 tstg tf See specified Test Circuit V 30 ns 300 ns 40 ns * : The 2SD1805 is classified by 500mA hFE as follows. Rank E F G hFE 120 to 200 160 to 320 280 to 560 Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 VR RB + 100μF RL + 470μF VBE VCC IC=10IB1= --10IB2=2A, VCC=10V Ordering Information Device 2SD1805F-E 2SD1805G-E Package Shipping TP 500pcs./bag TP 500pcs./bag 2SD1805F-TL-E TP-FA 700pcs./reel 2SD1805G-TL-E TP-FA 700pcs./reel memo Pb Free No.2115-2/9 2SD1805 IC -- VCE 5 30mA A 4 20mA 3 15mA 10mA 2 5mA 1 2 3 20mA 3 15mA 10mA 2 5mA IB=0 0 4 5 Collector-to-Emitter Voltage, VCE -- V 0 0.2 0.4 0.6 0.8 1.0 Collector-to-Emitter Voltage, VCE -- V ITR10035 IC -- VBE 6 30mA 4 1 IB=0 0 1 A 50m 40mA A m 60 Collector Current, IC -- A Collector Current, IC -- A 40m 0 IC -- VCE 5 hFE -- IC 1000 VCE=2V ITR10036 VCE=2V 7 DC Current Gain, hFE 5 4 3 2 Ta= 75° C 25° C --25 °C Collector Current, IC -- A 5 1 2 --25°C 100 7 3 2 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 5 3 3 2 100 7 5 3 0.1 2 3 5 2 1.0 3 5 10 ITR10038 Cob -- VCB 2 Output Capacitance, Cob -- pF 5 5 Collector Current, IC -- A VCE=10V 7 2 0.01 ITR10037 fT -- IC 1000 Gain-Bandwidth Product, fT -- MHz 25°C C Ta=75° 5 0 f=1MHz 100 7 5 3 2 2 10 2 10 3 5 7 2 100 3 5 Collector Current, IC -- mA 10 1.0 7 1000 ITR10039 3 2 100 7 C 25° 5 Ta=75°C 3 --25°C 2 5 7 2 10 3 5 7 100 ITR10040 VBE(sat) -- IC IC / IB=50 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 10 IC / IB=50 7 2 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 5 3 2 1.0 Ta= --25°C 25°C 7 75°C 5 3 2 10 5 0.01 2 3 5 0.1 2 3 5 1.0 Collector Current, IC -- A 2 3 5 10 ITR10041 5 0.01 2 3 5 0.1 2 3 5 1.0 Collector Current, IC -- A 2 3 5 10 ITR10042 No.2115-3/9 2SD1805 ASO 2 7 5 15 ICP IC 1 1 ms 10 0ms 0m DC s Tc op =2 era 5° tio C n 3 2 DC 1.0 op era 7 5 14 Collector Dissipation, PC -- W Collector Current, IC -- A 10 tio 3 nT a= 25 °C 2 0.1 7 5 2 3 12 10 8 6 4 2 Tc=25°C Single pulse 3 0.1 PC -- Ta 16 No heat sink 1 0 5 7 1.0 2 3 5 7 10 Collector-to-Emitter Voltage, VCE -- V 2 3 ITR10043 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 ITR10044 No.2115-4/9 2SD1805 Taping Specification 2SD1805F-TL-E, 2SD1805G-TL-E No.2115-5/9 2SD1805 Outline Drawing 2SD1805F-TL-E, 2SD1805G-TL-E Land Pattern Example Mass (g) Unit 0.282 mm * For reference Unit: mm 7.0 7.0 2.5 2.0 1.5 2.3 2.3 No.2115-6/9 2SD1805 Bag Packing Specification 2SD1805F-E, 2SD1805G-E No.2115-7/9 2SD1805 Outline Drawing 2SD1805F-E, 2SD1805G-E Mass (g) Unit 0.315 mm * For reference No.2115-8/9 2SD1805 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.2115-9/9