74AC139SC

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 74AC139, 74ACT139 Dual 1-of-4 Decoder / Demultiplexer General Description The AC/ACT139 is a high−speed, dual 1−of−4 decoder/demultiplexer. The device has two independent decoders, each accepting two inputs and providing four mutually−exclusive active−LOW outputs. Each decoder has an active−LOW Enable input which can be used as a data input for a 4−output demultiplexer. Each half of the AC/ACT139 can be used as a function generator providing all four minterms of two variables. www.onsemi.com Features • • • • • • ICC Reduced by 50% Multifunction Capability Two Completely Independent 1−of−4 Decoders Active LOW Mutually Exclusive Outputs Outputs Source/Sink 24 mA ACT139 has TTL−compatible Inputs ORDERING CODE: Order Number Case Number 74AC139SC Package Description 751BG 16−Lead Small Outline Integrated Circuit (SOIC), JEDEC MS−012, 0.150″ Narrow Body 74AC139SJ 565BF 16−Lead Small Outline Package (SOIC), EIAJ Type II, 5.3 mm Wide 74AC139MTC 948AH 16−Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO−153, 4.4 mm Wide 74AC139PC 648 74ACT139SC 751BG 16−Lead Small Outline Integrated Circuit (SOIC), JEDEC MS−012, 0.150″ Narrow Body 74ACT139SJ 565BF 16−Lead Small Outline Package (SOIC), EIAJ Type II, 5.3 mm Wide 74ACT139MTC 948AH 16−Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO−153, 4.4 mm Wide 74ACT139PC 648 NOTE: 16−Lead Plastic Dual−In−Line Package (PDIP), JEDEC MS−001, 0.300″ Wide 16−Lead Plastic Dual−In−Line Package (PDIP), JEDEC MS−001, 0.300″ Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. CONNECTION DIAGRAM PIN DESCRIPTIONS Pin Names © Semiconductor Components Industries, LLC, 1988 January, 2017 − Rev. 2 1 Description A0, A1 Address Inputs E Enable Inputs O0–O3 Outputs Publication Order Number: 74AC139/D 74AC139, 74ACT139 Logic Symbol/s Functional Description The AC/ACT139 is a high−speed dual 1−of−4 decoder/ demultiplexer. The device has two independent decoders, each of which accepts two binary weighted inputs (A0–A1) and provides four mutually exclusive active−LOW outputs (O0–O3). Each decoder has an active−LOW enable (E). When E is HIGH all outputs are forced HIGH. The enable can be used as the data input for a 4−output demultiplexer application. Each half of the AC/ACT139 generates all four minterms of two variables. These four minterms are useful in some applications, replacing multiple gate functions as shown in Figure 1, and thereby reducing the number of packages required in a logic network. IEEE/IEC Figure 1. Gate Functions (Each Half) TRUTH TABLE/S Logic Diagram/s Inputs Outputs E A0 A1 O0 O1 O2 O3 H X X H H H H L L L L H H H L H L H L H H L L H H H L H L H H H H H L H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.onsemi.com 2 74AC139, 74ACT139 ABSOLUTE MAXIMUM RATINGS Supply Voltage (VCC) −0.5 V to +7.0 V DC Input Diode Current (IIK) VI = −0.5 V VI = VCC + 0.5 V −20 mA +20 mA DC Input Voltage (VI) −0.5 V to VCC + 0.5 V DC Output Diode Current (IOK) VO = −0.5 V VO = VCC + 0.5 V −20 mA +20 mA DC Output Voltage (VO) −0.5 V to VCC + 0.5 V ±50 mA DC Output Source or Sink Current (IO) ±50 mA DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) −65°C to +150°C Junction Temperature (TJ) PDIP 140°C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Supply Voltage (VCC) AC ACT 2.0 V to 6.0 V 4.5 V to 5.5 V Input Voltage (VI) 0 V to VCC Output Voltage (VO) 0 V to VCC Operating Temperature (TA) −40°C to +85°C Minimum Input Edge Rate (DV/Dt) AC Devices VIN from 30% to 70% of VCC VCC @ 3.3 V, 4.5 V, 5.5 V 125 mV/ns Minimum Input Edge Rate (DV/Dt) ACT Devices VIN from 0.8 V to 2.0 V VCC @ 4.5 V, 5.5 V 125 mV/ns Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 3 74AC139, 74ACT139 DC ELECTRICAL CHARACTERISTICS FOR AC VCC Symbol VIH VIL VOH VOL Parameter Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage Maximum LOW Level Output Voltage TA = +25°C TA = −40°C to +85°C (V) Typ 3.0 1.5 2.1 Guaranteed Limits 2.1 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 3.0 1.5 0.9 0.9 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 3.0 2.99 2.9 2.9 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 Units Conditions V VOUT = 0.1 V or VCC − 0.1 V V VOUT = 0.1 V or VCC − 0.1 V V IOUT = −50 mA V VIN = VIL or VIH IOH = −12 mA IOH = −24 mA IOH = −24 mA (Note 1) V IOUT = 50 mA V VIN = VIL or VIH IOL = 12 mA IOL = 24 mA IOL = 24 mA (Note 1) 3.0 0.002 0.1 0.1 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 Maximum Input Leakage Current 5.5 ±0.1 ±1.0 mA VI = VCC, GND IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max IOHD Output Current (Note 2) 5.5 −75 mA VOHD = 3.85 V Min Maximum Quiescent Supply Current 5.5 40.0 mA VIN = VCC or GND IIN (Note 3) ICC (Note 3) 4.0 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0 ms, one output loaded at a time. 3. IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC. www.onsemi.com 4 74AC139, 74ACT139 DC ELECTRICAL CHARACTERISTICS FOR ACT VCC TA = +25°C TA = −40°C to +85°C (V) Typ VIH Minimum HIGH Level Input Voltage 4.5 1.5 2.0 2.0 5.5 1.5 2.0 2.0 VIL Maximum LOW Level Input Voltage 4.5 1.5 0.8 0.8 5.5 1.5 0.8 0.8 Minimum HIGH Level Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 4.5 3.86 3.76 5.5 4.86 4.76 Symbol VOH VOL Parameter Maximum LOW Level Output Voltage Guaranteed Limits Units Conditions V VOUT = 0.1 V or VCC − 0.1 V V VOUT = 0.1 V or VCC − 0.1 V V IOUT = −50 mA V VIN = VIL or VIH IOH = −24 mA IOH = −24 mA (Note 4) V IOUT = 50 mA V VIN = VIL or VIH IOL = 24 mA IOL = 24 mA (Note 4) 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 4.5 0.36 0.44 5.5 0.36 0.44 Maximum Input Leakage Current 5.5 ±0.1 ±1.0 mA VI = VCC, GND ICCT Maximum ICC/Input 5.5 1.5 mA VI = VCC − 2.1 V IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max IOHD Output Current (Note 5) 5.5 −75 mA VOHD = 3.85 V Min Maximum Quiescent Supply Current 5.5 40.0 mA VIN = VCC or GND IIN ICC 0.6 4.0 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0 ms, one output loaded at a time. www.onsemi.com 5 74AC139, 74ACT139 AC ELECTRICAL CHARACTERISTICS FOR AC TA = +25°C VCC TA = −40°C to +85°C CL = 50 pF (V) CL = 50 pF (Note 6) Min Typ Max Min Max Units Propagation Delay An to On 3.3 4.0 8.0 11.5 3.5 13.0 ns 5.0 3.0 6.5 8.5 2.5 9.5 tPHL Propagation Delay An to On 3.3 3.0 7.0 10.0 2.5 11.0 5.0 2.5 5.5 7.5 2.0 8.5 tPLH Propagation Delay En to On 3.3 4.5 9.5 12.0 3.5 13.0 5.0 3.5 7.0 8.5 3.0 10.0 tPHL Propagation Delay En to On 3.3 4.0 8.0 10.0 3.0 11.0 5.0 2.5 6.0 7.5 2.5 8.5 Symbol tPLH Parameter ns ns ns 6. Voltage Range 3.3 is 3.3 V ± 0.3 V. Voltage Range 5.0 is 5.0 V ± 0.5 V. AC ELECTRICAL CHARACTERISTICS FOR ACT TA = +25°C VCC CL = 50 pF (V) Symbol Parameter TA = −40°C to +85°C CL = 50 pF (Note 7) Min Typ Max Min Max Units tPLH Propagation Delay An to On 5.0 1.5 6.0 8.5 1.5 9.5 ns tPHL Propagation Delay An to On 5.0 1.5 6.0 9.5 1.5 10.5 ns tPLH Propagation Delay En to On 5.0 2.5 7.0 10.0 2.0 11.0 ns tPHL Propagation Delay En to On 5.0 2.0 7.0 9.5 1.5 10.5 ns 7. Voltage Range 5.0 is 5.0 V ± 0.5 V CAPACITANCE Symbol Parameter Typ Units Conditions CIN Input Capacitance 4.5 pF VCC = OPEN CPD Power Dissipation Capacitance 40.0 pF VCC = 5.0V www.onsemi.com 6 74AC139, 74ACT139 PACKAGE DIMENSIONS SOIC−16, 150 mils CASE 751BG−01 ISSUE O E1 E SYMBOL MIN NOM MAX A 1.35 1.75 A1 0.10 0.25 b 0.33 0.51 0.25 c 0.19 D 9.80 9.90 10.00 E 5.80 6.00 6.20 E1 3.80 3.90 4.00 1.27 BSC e h 0.25 0.50 L 0.40 1.27 θ 0º 8º PIN#1 IDENTIFICATION TOP VIEW D h q A e b A1 c L END VIEW SIDE VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MS-012. www.onsemi.com 7 74AC139, 74ACT139 PACKAGE DIMENSIONS SOP16 CASE 565BF ISSUE O www.onsemi.com 8 74AC139, 74ACT139 PACKAGE DIMENSIONS TSSOP−16 CASE 948AH−01 ISSUE O www.onsemi.com 9 74AC139, 74ACT139 PACKAGE DIMENSIONS PDIP−16 CASE 648−018 ISSUE V D A 16 9 E H E1 1 NOTE 8 8 b2 c B TOP VIEW END VIEW WITH LEADS CONSTRAINED NOTE 5 A2 A e/2 NOTE 3 L A1 C D1 SEATING PLANE M eB END VIEW e 16X b SIDE VIEW 0.010 M C A M B M NOTE 6 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSIONS A, A1 AND L ARE MEASURED WITH THE PACKAGE SEATED IN JEDEC SEATING PLANE GAUGE GS−3. 4. DIMENSIONS D, D1 AND E1 DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS ARE NOT TO EXCEED 0.10 INCH. 5. DIMENSION E IS MEASURED AT A POINT 0.015 BELOW DATUM PLANE H WITH THE LEADS CONSTRAINED PERPENDICULAR TO DATUM C. 6. DIMENSION eB IS MEASURED AT THE LEAD TIPS WITH THE LEADS UNCONSTRAINED. 7. DATUM PLANE H IS COINCIDENT WITH THE BOTTOM OF THE LEADS, WHERE THE LEADS EXIT THE BODY. 8. PACKAGE CONTOUR IS OPTIONAL (ROUNDED OR SQUARE CORNERS). DIM A A1 A2 b b2 C D D1 E E1 e eB L M INCHES MIN MAX −−−− 0.210 0.015 −−−− 0.115 0.195 0.014 0.022 0.060 TYP 0.008 0.014 0.735 0.775 0.005 −−−− 0.300 0.325 0.240 0.280 0.100 BSC −−−− 0.430 0.115 0.150 −−−− 10 ° MILLIMETERS MIN MAX −−− 5.33 0.38 −−− 2.92 4.95 0.35 0.56 1.52 TYP 0.20 0.36 18.67 19.69 0.13 −−− 7.62 8.26 6.10 7.11 2.54 BSC −−− 10.92 2.92 3.81 −−− 10 ° ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 74AC139/D ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com