74AC86SCX_SF501651

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised February 2005 74AC86 Quad 2-Input Exclusive-OR Gate General Description Features The AC86 contains four, 2-input exclusive-OR gates. ■ ICC reduced by 50% ■ Outputs source/sink 24 mA Ordering Code: Order Number 74AC86SC 74AC86SJ 74AC86MTC 74AC86PC Package Number Package Description M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow M14D Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC14 N14A 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Connection Diagram Logic Symbol IEEE/IEC Pin Descriptions Pin Names Description A0–A3 Inputs B0–B3 Inputs O0–O3 Outputs FACT¥ is a trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS009909 www.fairchildsemi.com 74AC86 Quad 2-Input Exclusive-OR Gate September 1988 74AC86 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) Recommended Operating Conditions 0.5V to 7.0V DC Input Diode Current (IIK) VI 0.5V VI V CC 0.5V DC Input Voltage (VI) Supply Voltage (VCC) 20 mA 20 mA 0.5V to VCC 0.5V 0V to VCC Output Voltage (VO) 0V to VCC 40qC to 85qC Operating Temperature (TA) Minimum Input Edge Rate ('V/'t) DC Output Diode Current (IOK) 20 mA 20 mA VO DC Output Voltage (VO) 0.5V to VCC 0.5V r 50 mA DC Output Source or Sink Current (IO) VO 2.0V to 6.0V Input Voltage (VI) 0.5V VCC 0.5V 125 mV/ns VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V DC VCC or Ground Current Per Output Pin (ICC or IGND) Storage Temperature (TSTG) r 50 mA 65qC to 150qC Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT¥ circuits outside databook specifications. Junction Temperature (TJ) 140qC PDIP DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter VCC (V) TA 25qC Typ TA 40qC to 85qC Guaranteed Limits Minimum HIGH Level 3.0 1.5 2.1 2.1 Input Voltage 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 Maximum LOW Level 3.0 1.5 0.9 0.9 Input Voltage 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 Maximum LOW Level 3.0 0.002 0.1 0.1 Output Voltage 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 IIN (Note 4) Maximum Input Leakage Current 5.5 r0.1 IOLD Minimum Dynamic IOHD Output Current (Note 3) ICC Maximum Quiescent (Note 4) Supply Current Units Conditions VOUT or VCC  0.1V V or VCC  0.1V V IOUT 50 PA VIN VIL or VIH VOUT 0.1V IOH = 12 mA V IOH = 24 mA IOH = 24 mA (Note 2) V IOUT 50 PA VIL or VIH VIN IOL = 12 mA V IOL = 24 mA r1.0 PA VI 5.5 75 mA VOLD 5.5 75 mA VOHD 5.5 2.0 20.0 Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 20 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. www.fairchildsemi.com 0.1V V 2 IOL = 24 mA (Note 2) PA VIN VCC, GND 1.65V Max 3.85V Min VCC or GND Symbol tPHL tPLH Parameter VCC TA 25qC (V) CL 50 pF (Note 5) Min Propagation Delay 3.3 Inputs to Outputs 5.0 Propagation Delay Inputs to Outputs 40qC to 85qC TA CL 40 pF Units Typ Max Min Max 2.0 6.0 11.5 1.5 12.5 1.5 4.5 8.5 1.0 9.5 3.3 2.0 6.5 11.5 1.5 12.5 5.0 1.5 4.5 8.5 1.0 9.0 ns ns Note 5: Voltage Range 3.3V is 3.3V r 0.3V Voltage Range 5.0V is 5.0V r 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC OPEN CPD Power Dissipation Capacitance 35 pF VCC 5.0V 3 Conditions www.fairchildsemi.com 74AC86 AC Electrical Characteristics 0.65 A 0.43TYP 14 8 B 6.4 6.10 3.2 1 PIN#1 IDENT 0.2 C B A 7 TOP VIEW 1.65 ALL LEAD TIPS 0.45 RECOMMENDED LAND PATTERN 1.2 MAX 0.30 0.19 ALL LEAD TIPS 0.1 C 0.65 SEE DETAIL A 0.90+0.15 -0.10 0.13 A B 0.20 0.09 C C FRONT VIEW 0.09 MIN NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 2009. E. LANDPATTERN STANDARD: SOP65P640X110-14M. F. DRAWING FILE NAME: MKT-MTC14rev7. GAGE PLANE 0.09 MIN 1.00 0.25 SEATING PLANE DETAIL A 8.75 8.50 A 7.62 14 8 14 B 0.65 8 4.00 3.80 6.00 1 PIN #1 IDENT. 1.27 (0.33) TOP VIEW 5.60 7 0.51 0.35 0.25 M C B A 1.75 MAX 1.70 1 1.27 LAND PATTERN RECOMMENDATION A C 1.50 1.25 FRONT VIEW 0.25 0.10 0.50 0.25 x 45 R0.10 GAGE PLANE R0.10 0.36 8° 0° 0.90 0.50 (1.04) 0.10 C 0.25 0.19 SIDE VIEW NOTES: A. CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C B. ALL DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS D. LAND PATTERN STANDARD: SOIC127P600X145-14M E. CONFORMS TO ASME Y14.5M, 2009 D. DRAWING FILENAME: MKT-M14Arev14 SEATING PLANE DETAIL A SCALE 16 : 1 7 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com