74ACT377SCX

Revised June 2001 74AC377 • 74ACT377 Octal D-Type Flip-Flop with Clock Enable General Description Features The AC/ACT377 has eight edge-triggered, D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) input loads all flip-flops simultaneously, when the Clock Enable (CE) is LOW. ■ Ideal for addressable register applications The register is fully edge-triggered. The state of each D input, one setup time before the LOW-to-HIGH clock transition, is transferred to the corresponding flip-flop’s Q output. The CE input must be stable only one setup time prior to the LOW-to-HIGH clock transition for predictable operation. ■ ICC reduced by 50% ■ Clock enable for address and data synchronization applications ■ Eight edge-triggered D-type flip-flops ■ Buffered common clock ■ Outputs source/sink 24 mA ■ See 273 for master reset version ■ See 373 for transparent latch version ■ See 374 for 3-STATE version ■ ACT377 has TTL-compatible inputs Ordering Code: Order Number Package Number 74AC377SC M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC377SJ 74AC377MTC 74AC377PC MTC20 N20A Package Description 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT377SC M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74ACT377SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACT377MTC 74ACT377PC MTC20 N20A 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Pin Descriptions Pin Names Description D0–D7 Data Inputs CE Clock Enable (Active LOW) Q0–Q7 Data Outputs CP Clock Pulse Input FACT is a trademark of Fairchild Semiconductor Corporation. © 2001 Fairchild Semiconductor Corporation DS009961 www.fairchildsemi.com 74AC377 • 74ACT377 Octal D-Type Flip-Flop with Clock Enable November 1988 74AC377 • 74ACT377 Logic Symbols IEEE/IEC Mode Select-Function Table Inputs Outputs Operating Mode CP Load ‘1' Load ‘0' Hold (Do Nothing)    CE Dn Qn L H H L L L H X No Change X H X No Change H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial = LOW-to-HIGH Clock Transition  Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 Supply Voltage (VCC) Recommended Operating Conditions −0.5V to +7.0V DC Input Diode Current (IIK) VI = −0.5V −20 mA VI = VCC + 0.5V +20 mA DC Input Voltage (VI) Supply Voltage (VCC) −0.5V to VCC + 0.5V VO = VCC + 0.5V +20 mA 0V to VCC −40°C to +85°C Minimum Input Edge Rate (∆V/∆t) AC Devices DC Output Source VIN from 30% to 70% of VCC ±50 mA VCC @ 3.3V, 4.5V, 5.5V 125 mV/ns Minimum Input Edge Rate (∆V/∆t) DC VCC or Ground Current ±50 mA per Output Pin (ICC or IGND) Storage Temperature (TSTG) 0V to VCC Operating Temperature (TA) −0.5V to VCC + 0.5V or Sink Current (IO) 4.5V to 5.5V Output Voltage (VO) −20 mA DC Output Voltage (VO) 2.0V to 6.0V ACT Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V AC ACT Devices −65°C to +150°C VIN from 0.8V to 2.0V Junction Temperature (TJ) VCC @ 4.5V, 5.5V 140°C PDIP 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications. DC Electrical Characteristics for AC Symbol VIH VIL VOH Parameter TA = +25°C VCC TA = −40°C to +85°C (V) Typ Guaranteed Limits Minimum HIGH Level 3.0 1.5 Input Voltage 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 2.1 Units Maximum LOW Level 3.0 1.5 0.9 0.9 Input Voltage 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 Conditions VOUT = 0.1V 2.1 V or VCC − 0.1V VOUT = 0.1V V or VCC − 0.1V V IOUT = −50 µA VIN = VIL or VIH VOL IOH = −12 mA V IOH = −24 mA IOH = −24 mA (Note 2) Maximum LOW Level 3.0 0.002 0.1 0.1 Output Voltage 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 5.5 ± 0.1 ± 1.0 µA V IOUT = 50 µA VIN = VIL or VIH IOL = 12 mA V IOL = 24 mA IOL = 24 mA (Note 2) VI = VCC, IIN Maximum Input (Note 4) Leakage Current IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65V Max IOHD Output Current (Note 3) 5.5 −75 mA VOHD = 3.85V Min ICC Maximum Quiescent (Note 4) Supply Current 40.0 µA VIN = VCC or GND 5.5 4.0 GND Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. 3 www.fairchildsemi.com 74AC377 • 74ACT377 Absolute Maximum Ratings(Note 1) 74AC377 • 74ACT377 DC Electrical Characteristics for ACT Symbol Parameter VIL VOH TA = −40°C to +85°C (V) Typ 4.5 1.5 Input Voltage 5.5 1.5 2.0 2.0 Maximum LOW Level 4.5 1.5 0.8 0.8 Input Voltage 5.5 1.5 0.8 0.8 Minimum HIGH Level 4.5 4.49 4.4 4.4 Output Voltage 5.5 5.49 5.4 5.4 3.86 3.76 Minimum HIGH Level VIH TA = +25°C VCC Guaranteed Limits 2.0 Units 2.0 V V Conditions VOUT = 0.1V or VCC −0.1V VOUT = 0.1V or VCC −0.1V V IOUT = −50 µA V IOH = −24 mA VIN = VIL or VIH 4.5 5.5 VOL IOH = −24 mA (Note 5) 4.86 4.76 Maximum LOW Level 4.5 0.001 0.1 0.1 Output Voltage 5.5 0.001 0.1 0.1 4.5 0.36 0.44 5.5 0.36 0.44 5.5 ±0.1 ±1.0 µA VI = VCC, GND V IOUT = 50 µA V IOL = 24 mA VIN = VIL or VIH IIN Maximum Input Leakage Current ICCT Maximum IOL = 24 mA (Note 5) 1.5 mA VI = VCC − 2.1V IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65V Max IOHD Output Current (Note 6) 5.5 −75 mA ICC Maximum Quiescent 5.5 ICC/Input Supply Current 0.6 5.5 4.0 40.0 µA VOHD = 3.85V Min VIN = VCC or GND Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. AC Electrical Characteristics for AC VCC Symbol Parameter fMAX tPLH tPHL TA = +25°C (V) (Note 7) Min Typ TA = −40°C to +85°C Max Min Maximum Clock 3.3 90 125 75 Frequency 5.0 140 175 125 Propagation Delay 3.3 3.0 8.0 13.0 1.5 14.0 CP to Qn 5.0 2.0 6.0 9.0 1.5 10.0 Propagation Delay 3.3 3.5 8.5 13.0 2.0 14.5 CP to Qn 5.0 2.5 6.5 10.0 1.5 11.0 Note 7: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V www.fairchildsemi.com 4 Units Max MHz ns ns Symbol tS tH tS tH tW Parameter VCC TA = +25°C (V) CL = 50 pF TA = −40°C to +85°C CL = 50 pF (Note 8) Typ Setup Time, HIGH or LOW 3.3 3.5 5.5 6.0 Dn to CP 5.0 2.5 4.0 4.5 Units Guaranteed Minimum Hold Time, HIGH or LOW 3.3 −2.0 0 0 Dn to CP 5.0 −1.0 1.0 1.0 Setup Time, HIGH or LOW 3.3 4.0 6.0 7.5 CE to CP 5.0 2.5 4.0 4.5 Hold Time, HIGH or LOW 3.3 −3.5 0 0 CE to CP 5.0 −2.0 1.0 1.0 CP Pulse Width 3.3 3.5 5.5 6.0 HIGH or LOW 5.0 2.5 4.0 4.5 ns ns ns ns ns Note 8: Voltage Range 3.3 is 3.0V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V AC Electrical Characteristics for ACT Symbol Parameter fMAX Maximum Clock Frequency tPLH Propagation Delay CP to Qn tPHL Propagation Delay CP to Qn VCC TA = +25°C (V) CL = 50 pF TA = −40°C to +85°C CL = 50 pF Max Min Units (Note 9) Min Typ Max 5.0 140 175 5.0 3.0 6.5 9.0 2.5 10.0 ns 5.0 3.5 7.0 10.0 2.5 11.0 ns 125 MHz Note 9: Voltage Range 5.0 is 5.0V ± 0.5V AC Operating Requirements for ACT Symbol Parameter Setup Time, HIGH or LOW tS Dn to CP tH Hold Time, HIGH or LOW Dn to CP tS Setup Time, HIGH or LOW CE to CP tH Hold Time, HIGH or LOW CE to CP tW CP Pulse Width HIGH or LOW VCC TA = +25°C (V) CL = 50 pF TA = −40°C to +85°C CL = 50 pF Units (Note 10) Typ Guaranteed Minimum 5.0 2.5 4.5 5.5 ns 5.0 −1.0 1.0 1.0 ns 5.0 2.5 4.5 5.5 ns 5.0 −1.0 1.0 1.0 ns 5.0 2.0 4.0 4.5 ns Note 10: Voltage Range 5.0 is 5.0V ± 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC = OPEN CPD Power Dissipation Capacitance 90.0 pF VCC = 5.0V 5 Conditions www.fairchildsemi.com 74AC377 • 74ACT377 AC Operating Requirements for AC 74AC377 • 74ACT377 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B www.fairchildsemi.com 6 74AC377 • 74ACT377 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D 7 www.fairchildsemi.com 74AC377 • 74ACT377 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 www.fairchildsemi.com 8 74AC377 • 74ACT377 Octal D-Type Flip-Flop with Clock Enable Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 9 www.fairchildsemi.com