74ALVC245WMX

74ALVC245 Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Features General Description ■ 1.65V to 3.6V VCC supply operation The ALVC245 contains eight non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The T/R input determines the direction of data flow. The OE input disables both the A and B ports by placing them in a high impedance state. ■ 3.6V tolerant inputs and outputs ■ Power-off high impedance inputs and outputs ■ Supports Live Insertion and Withdrawal(1) ■ tPD: – 3.4ns max. for 3.0V to 3.6V VCC – 3.9ns max. for 2.3V to 2.7V VCC – 6ns max. for 1.65V to 1.95V VCC ■ Uses patented Quiet Series noise/EMI reduction circuitry ■ Latchup conforms to JEDEC JED78 ■ ESD performance: – Human body model > 2000V – Machine model > 200V Note: 1. To ensure the high impedance state during power up and power down, OEn should be tied to VCC through a pull up resistor. The minimum value of the resistor is determined by the current sourcing capability of the driver. The 74ALVC245 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74ALVC245 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. Ordering Information Package Number Package Description 74ALVC245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74ALVC245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Order Number Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs January 2008 Logic Symbol Truth Table Inputs OE Pin Description Pin Names Description Outputs T/R L L Bus B0–B7 Data to Bus A0–A7 L H Bus A0–A7 Data to Bus B0–B7 H X HIGH Z State on A0–A7, B0–B7(2) H = HIGH Voltage Level L = LOW Voltage Level OE Output Enable Input (Active LOW) X = Immaterial T/R Transmit/Receive Input Z = High Impedance A0–A7 Side A Inputs or 3-STATE Outputs B0–B7 Side B Inputs or 3-STATE Outputs Note: 2. Unused bus terminals during HIGH Z State must be held HIGH or LOW. Logic Diagram ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 2 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Connection Diagram Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Rating −0.5V to +4.6V Supply Voltage VI DC Input Voltage −0.5V to 4.6V VO Output Voltage(3) −0.5V to VCC +0.5V IIK DC Input Diode Current, VI < 0V −50mA IOK DC Output Diode Current, VO < 0V −50mA DC Output Source/Sink Current ±50mA IOH/IOL ±100mA ICC or GND DC VCC or GND Current per Supply Pin TSTG −65°C to +150°C Storage Temperature Range Note: 3. IO Absolute Maximum Rating must be observed, limited to 4.6V. Recommended Operating Conditions(4) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage VI Input Voltage VO Output Voltage TA Free Air Operating Temperature ∆V / ∆t Rating 1.65V to 3.6V 0V to VCC 0V to VCC −40°C to +85°C Minimum Input Edge Rate: VIN = 0.8V to 2.0V, VCC = 3.0V 10ns/V Note: 4. Floating or unused control inputs must be held HIGH or LOW. ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 3 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Absolute Maximum Ratings Symbol VIH VIL VOH VOL Parameter VCC (V) HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage Min. Max. 1.65–1.95 0.65 x VCC 2.3–2.7 1.7 2.7–3.6 2.0 0.35 x VCC 2.3–2.7 0.7 2.7–3.6 0.8 IOH = −100µA VCC – 0.2 1.65 IOH = −4mA 1.2 2.3 IOH = −6mA 2.0 2.3 IOH = −12mA 1.7 2.7 2.2 3.0 2.4 Units V 1.65–1.95 1.65–3.6 LOW Level Output Voltage Conditions V V 3.0 IOH = −24mA 1.65–3.6 IOL = 100µA 0.2 1.65 IOL = 4mA 0.45 2.3 IOL = mA 0.4 2.3 IOL = 12mA 0.7 2 2.7 V 0.4 3.0 IOL = 24mA 0.55 Input Leakage Current 3.6 0 ≤ VI ≤ 3.6V ±5.0 µA IOZ 3-STATE Output Leakage 3.6 0 ≤ VO ≤ 3.6V ±10 µA ICC Quiescent Supply Current 3.6 VI = VCC or GND, IO = 0 10 µA VIH = VCC − 0.6V 750 µA II ∆ICC Increase in ICC per Input 3–3.6 AC Electrical Characteristics TA = −40°C to +85°C, RL = 500Ω CL = 50pF VCC = 3.3V ± 0.3V Symbol Parameter Min. Max. CL = 30pF VCC = 2.7V Min. VCC = 2.5V ± 0.2V VCC = 1.8V ± 0.15V Max. Min. Max. Min. Max. Units tPHL, tPLH Propagation Delay 1.3 3.4 3.9 1.0 3.5 1.5 6.0 ns tPZL, tPZH Output Enable Time 1.6 5.5 6.3 2.0 6.0 2.7 8.6 ns tPLZ, tPHZ Output Disable Time 1.7 5.5 5.3 0.8 4.8 1.5 8.0 ns ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 4 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs DC Electrical Characteristics TA = +25°C Symbol Parameter Conditions VCC Typical Units pF CIN Input Capacitance Control VI = 0V or VCC 3.3 3 CI/O Input/ Output Capacitance A or B Ports VI = 0V or VCC 3.3 6 CPD Power Dissipation Capacitance Outputs Enabled f = 10MHz, CL = 0pF 3.3 30 2.5 27 1.8 25 3.3 0 2.5 0 1.8 0 Outputs Disabled f = 10MHz, CL = 0pF pF AC Loading and Waveforms Table 1. Values for Figure 1 Test Switch tPLH, tPHL Open tPZL, tPLZ VL tPZH, tPHZ GND Figure 1. AC Test Circuit Table 2. Variable Matrix (Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50Ω) VCC Symbol 3.3V ± 0.3V 2.7V 2.5V ± 0.2V 1.8V ± 0.15V Vmi 1.5V 1.5V VCC / 2 VCC / 2 Vmo 1.5V 1.5V VCC / 2 VCC / 2 VX VOL + 0.3V VOL + 0.3V VOL + 0.15V VOL + 0.15V VY VOH − 0.3V VOH − 0.3V VOH − 0.15V VOH − 0.15V VL 6V 6V VCC x 2 VCC x 2 Figure 2. Waveform for Inverting and Non-Inverting Functions ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 Figure 3. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic www.fairchildsemi.com 5 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Capacitance 13.00 12.60 A 11.43 20 11 B 9.50 10.65 7.60 10.00 7.40 2.25 1 PIN ONE INDICATOR 10 0.51 0.35 0.25 M 0.65 1.27 1.27 C B A LAND PATTERN RECOMMENDATION 2.65 MAX SEE DETAIL A 0.33 0.20 C 0.75 0.25 X 45° SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE (R0.10) 0.10 C 0.30 0.10 0.25 8° 0° A) THIS PACKAGE CONFORMS TO JEDEC MS-013, VARIATION AC, ISSUE E B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. D) CONFORMS TO ASME Y14.5M-1994 1.27 0.40 SEATING PLANE E) LANDPATTERN STANDARD: SOIC127P1030X265-20L (1.40) DETAIL A F) DRAWING FILENAME: MKT-M20BREV3 SCALE: 2:1 Figure 4. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 6 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Physical Dimensions 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs Physical Dimensions (Continued) Figure 5. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 7 ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EZSWITCH™ * ™ PDP-SPM™ SyncFET™ ® Power220® ® Power247 The Power Franchise® POWEREDGE® Power-SPM™ PowerTrench® TinyBoost™ Programmable Active Droop™ TinyBuck™ ® QFET TinyLogic® QS™ TINYOPTO™ QT Optoelectronics™ TinyPower™ ® Quiet Series™ TinyPWM™ RapidConfigure™ TinyWire™ Fairchild® SMART START™ Fairchild Semiconductor® µSerDes™ ® SPM FACT Quiet Series™ UHC® STEALTH™ FACT® Ultra FRFET™ SuperFET™ FAST® UniFET™ SuperSOT™-3 FastvCore™ VCX™ ® ®* SuperSOT™-6 FlashWriter SuperSOT™-8 * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I32 ©2001 Fairchild Semiconductor Corporation 74ALVC245 Rev. 1.3.0 www.fairchildsemi.com 8 74ALVC245 — Low Voltage Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.